RESUMO
The integrity of the intestinal mucus barrier is crucial for human health, as it serves as the body's first line of defense against pathogens. However, postnatal development of the mucus barrier and interactions between maturity and its ability to adapt to external challenges in neonatal infants remain unclear. In this study, we unveil a distinct developmental trajectory of the mucus barrier in preterm piglets, leading to enhanced mucus microstructure and reduced mucus diffusivity compared to term piglets. Notably, we found that necrotizing enterocolitis (NEC) is associated with increased mucus diffusivity of our large pathogen model compound, establishing a direct link between the NEC condition and the mucus barrier. Furthermore, we observed that addition of sodium decanoate had varying effects on mucus diffusivity depending on maturity and health state of the piglets. These findings demonstrate that regulatory mechanisms governing the neonatal mucosal barrier are highly complex and are influenced by age, maturity, and health conditions. Therefore, our results highlight the need for specific therapeutic strategies tailored to each neonatal period to ensure optimal gut health.
Assuntos
Ácidos Decanoicos , Enterocolite Necrosante , Muco , Recém-Nascido , Animais , Humanos , Suínos , Inflamação , Suplementos Nutricionais , Enterocolite Necrosante/tratamento farmacológico , Mucosa IntestinalRESUMO
A UV imaging release-testing setup comprising an agarose gel as a model for tumorous tissue was developed. The setup was optimized with respect to agarose concentration (0.5% (w/v)), injection procedure, and temperature control. A repeatable injection protocol was established allowing injection into cavities with well-defined geometries. The effective resolution of the SDi2 UV imaging system is 30-80 µm. The linear range of the imaging system is less than that of typical spectrophotometers. Consequently, non-linear cAMP calibration curves were applied for quantification at 280 nm. The degree of deviation from Beer's law was affected by the background absorbance of the gel matrix. MATLAB scripts provided hitherto missing flexibility with respect to definition and utilization of quantification zones, contour lines facilitating visualization, and automated, continuous data analysis. Various release patterns were observed for an aqueous solution and in situ forming Pluronic F127 hydrogel and PLGA implants containing cAMP as a model for STING ligands. The UV imaging and MATLAB data analysis setup constituted a significant technical development in terms of visualizing behavior for injectable formulations intended for intra-tumoral delivery, and, thereby, a step toward establishment of a bio-predictive in vitro release-testing method.
Assuntos
Hidrogéis , Poloxâmero , Sefarose , TemperaturaRESUMO
PURPOSE: Asthma is a prevalent lung disorder that cause heavy burdens globally. Inhalation medicaments can relieve symptoms, improve lung function and, thus, the quality of life. However, it is well-documented that patients often do not get the prescribed dose out of an inhaler and the deposition of drug is suboptimal, due to incorrect handling of the device and wrong inhalation technique. This study aims to design and fabricate an acoustic dry powder inhaler (ADPI) for monitoring inhalation flow and related drug administration in order to evaluate whether the patient receives the complete dose out of the inhaler. METHODS: The devices were fabricated using 3D printing and the impact of the acoustic element geometry and printing resolution on the acoustic signal was investigated. Commercial Foradil (formoterol fumarate) capsules were used to validate the availability of the ADPI for medication dose tracking. The acoustic signal was analysed with Partial-Least-Squares (PLS) regression. RESULTS: Indicate that specific acoustic signals could be generated at different air flow rates using a passive acoustic element with specific design features. This acoustic signal could be correlated with the PLS model to the air flow rate. A more distinct sound spectra could be acquired at higher printing resolution. The sound spectra from the ADPI with no capsule, a full capsule and an empty capsule are different which could be used for medication tracking. CONCLUSIONS: This study shows that it is possible to evaluate the medication quality of inhaled medicaments by monitoring the acoustic signal generated during the inhalation process.
Assuntos
Asma/tratamento farmacológico , Broncodilatadores/química , Inaladores de Pó Seco/instrumentação , Fumarato de Formoterol/química , Impressão Tridimensional , Acústica , Administração por Inalação , Asma/fisiopatologia , Broncodilatadores/administração & dosagem , Sistemas de Liberação de Medicamentos/instrumentação , Desenho de Equipamento/instrumentação , Fumarato de Formoterol/administração & dosagem , Humanos , Análise dos Mínimos Quadrados , Pulmão/metabolismo , Monitorização Fisiológica/instrumentação , Pós/química , Pós/farmacologia , Análise de Regressão , SomRESUMO
Application of additive manufacturing techniques (3D printing) for mass-customized products has boomed in the recent years. In pharmaceutical industry and research, the interest has grown particularly with the future scenario of more personalized medicinal products. Understanding a broad range of material properties and process behavior of the drug-excipient combinations is necessary for successful 3D printing of dosage forms. This commentary reviews recent 3D-printing studies by fused deposition modeling (FDM) technique in pharmaceutical sciences, extending into the fields of polymer processing and rapid prototyping, where more in-depth studies on the feedstock material properties, modeling, and simulation of the FDM process have been performed. A case study of a model oral dosage form from custom-prepared indomethacin-polycaprolactone feedstock filament was used as an example in the pharmaceutical context. The printability was assessed in the different process steps: preparation of customized filaments for FDM, filament feeding, deposition, and solidification. These were linked with the rheological, thermal, and mechanical properties and their characterization, relevant for understanding the printability of drug products by FDM.
Assuntos
Indústria Farmacêutica/métodos , Tecnologia Farmacêutica/métodos , Administração Oral , Formas de Dosagem , Liberação Controlada de Fármacos/efeitos dos fármacos , Excipientes/química , Polímeros/química , Impressão Tridimensional , Reologia/métodos , Solubilidade/efeitos dos fármacosRESUMO
Nanopharmaceuticals aim at translating the unique features of nano-scale materials into therapeutic products and consequently their development relies critically on the progression in manufacturing technology to allow scalable processes complying with process economy and quality assurance. The relatively high failure rate in translational nanopharmaceutical research and development, with respect to new products on the market, is at least partly due to immature bottom-up manufacturing development and resulting sub-optimal control of quality attributes in nanopharmaceuticals. Recently, quality-oriented manufacturing of pharmaceuticals has undergone an unprecedented change toward process and product development interaction. In this context, Quality by Design (QbD) aims to integrate product and process development resulting in an increased number of product applications to regulatory agencies and stronger proprietary defense strategies of process-based products. Although QbD can be applied to essentially any production approach, microfluidic production offers particular opportunities for QbD-based manufacturing of nanopharmaceuticals. Microfluidics provides unique design flexibility, process control and parameter predictability, and also offers ample opportunities for modular production setups, allowing process feedback for continuously operating production and process control. The present review aims at outlining emerging opportunities in the synergistic implementation of QbD strategies and microfluidic production in contemporary development and manufacturing of nanopharmaceuticals. In doing so, aspects of design and development, but also technology management, are reviewed, as is the strategic role of these tools for aligning nanopharmaceutical innovation, development, and advanced industrialization in the broader pharmaceutical field.
Assuntos
Desenho de Fármacos , Técnicas Analíticas Microfluídicas , Nanomedicina , Controle de Qualidade , HumanosRESUMO
Rapid prototyping based on in silico design and 3D printing enables fast customization of complex geometries to multiple needs. This study utilizes, additive manufacturing for rapid prototyping of elements for continuously operating mixing geometries including interfaces with process analytical technology (PAT) tools, to show that 3D printing can be used for prototyping of both parts of production line and PAT interfacing solution. An additional setup was designed for measuring the dynamic calibration samples for a semi-quantitative near infrared (NIR) spectroscopic model. The powder was filled in a small calibration chamber and in-line NIR spectra of calibration samples were collected from moving material while mimicking the powder flow dynamics in a typical continuous mixer. This dynamic powder mixing system was compared with a static powder calibration model where the NIR probe was placed at different positions on a static sample. Principal component analysis (PCA) revealed that the 3D printed device with dynamic measurement of the NIR spectra had more potential for quantitative analysis. With the prototype continuous mixer, two differently placed process interfaces for NIR spectroscopic monitoring of the powder mixing were evaluated. With this approach, the importance of positioning the process analytical tools to assess the blend uniformity could be demonstrated. It was also observed that with the longer mixing geometry, a better mixing result was achieved due to a larger hold up volume and increased residence time.