Design and development of portable handheld multimodal spectroscopic probe system for skin tissue analysis.

The potential of optical spectroscopic techniques such as diffused reflectance and fluorescence as non-invasive, in vivo diagnostic tools is being explored and validated recently. In this paper, we present the design and development of a handheld, portable, multimodal fiber optic based probe scheme to sequentially measure diffuse reflectance and fluorescence. The proposed prototype is designed to sequentially acquire diffused reflectance in the broad wavelength range of 400 nm-1600 nm and fluorescence using custom-chosen spectrophotometers, monochromatic and broadband light sources, fibers to accommodate a wide wavelength range, custom-built probe distal end, and a real-time spectral stitching and display unit. The prototype is characterized using in-house fabricated phantom tissue samples with tunable optical properties such as scattering and absorption. The depth profile study is carried out using phantom tissue layers of known optical parameters followed by the sequential measurement of diffused reflectance and fluorescence from the tissue mimicking sample.

Influence of p-n junction mechanism and alumina overlayer on the photocatalytic performance of TiO2 nanotubes.

Modified hybrid structures of TiO2 nanotubes (TONT), p-Al doped TONT/n-TONT with an additional overlayer of alumina, are constructed to achieve 99.57% photodegradation of the stable organic pollutant methylene blue (MB) within 180 min, a degradation rate 17 times higher than pure TONTs. The anodization at three different temperatures 2, 28 and 40 °C followed by impregnation of Al is used for their preparation. The analyses of structure, chemical composition and morphology are completed using x-ray diffraction, x-ray photoelectron spectroscopy (XPS) and high resolution transmission microscopy, respectively, Rutherford back scattering and field emission scanning electron microscopy confirm the formation of the hybrid structure. This structure exhibits the highest photodegradation rate with TONT based catalysts to date for MB blue, by enhancing the electron-hole separation, the absorption of visible photons and the adsorption sites for the pollutant. The optical data coupled with valence band XPS is used for elucidating the energy band structure of the p-n junctions and to gain insight into the effect of the junction mechanism on photoactivity. The rectification ratios of the impregnated p-n junctions, determined by current-voltage measurements, are found to vary from 102 to 106.