Chirality in luminescent Cs3Cu2Br5 microcrystals produced via ligand-assisted reprecipitation.

Herein we report new chiral luminescent Cs3Cu2Br5 needle-like microcrystals and the analysis of their optical properties and the effect of the ligand structure on the transfer of chirality.

Light Conversion upon Photoexcitation of NaBiF4:Yb3+/Ho3+/Ce3+ Nanocrystalline Particles.

NaBiF4 nanocrystalline particles were synthesized by means of a facile precipitation synthesis route to explore upconversion emission properties when doped with lanthanide ions. In particular, the incorporation of the Yb3+-Ho3+-Ce3+ triad with controlled ion concentration facilitates near-IR pumping conversion into visible light, with the possibility of color emission tuning depending on Ce3+ doping amount. We observed that introducing a Ce3+ content up to 20 at.% in NaBiF4:Yb3+/Ho3+, the chromaticity progressively turns from green for the Ce3+ undoped system to red. This is due to cross-relaxation mechanisms between Ho3+ and Ce3+ ions that influence the relative efficiency of the overall upconversion pathways, as discussed on the basis of a theoretical rate equation model. Furthermore, experimental results suggest that the photoexcitation of intra-4f Ho3+ transitions with light near the UV-visible edge can promote downconverted Yb3+ near-IR emission through quantum cutting triggered by Ho3+-Yb3+ energy transfer mechanisms. The present study evidences the potentiality of the developed NaBiF4 particles for applications that exploit lanthanide-based light frequency conversion and multicolor emission tuning.

PEG-Coated MnZn Ferrite Nanoparticles with Hierarchical Structure as MRI Contrast Agent.

In this work, MnZn ferrite nanoparticles with hierarchical morphology were synthesized hydrothermally, and their surface characteristics were improved by the PEGylation process. In vitro MRI studies were also conducted to evaluate the ability of the synthesized nanoparticles as a contrast agent. All results were compared with those obtained for MnZn ferrite nanoparticles with normal structure. Microstructural evaluations showed that in ferrite with hierarchical morphology, the spherical particles with an average size of ~20 nm made a distinctive structure consisting of rows of nanoparticles which is a relatively big assembly like a dandelion. The smaller particle size and dandelion-like morphology led to an increase in specific surface area for the hierarchical structure (~69 m2/g) in comparison to the normal one (~30 m2/g) with an average particle size of ~40 nm. In vitro MRI, cytotoxicity and hemocompatibility assays confirmed the PEG-coated MnZn ferrite nanoparticles with hierarchical structure synthesized in the current study can be considered as an MRI contrast agent.

Chiral non-stoichiometric ternary silver indium sulfide quantum dots: investigation on the chirality transfer by cysteine.

Chiral semiconductor quantum dots have recently received broad attention due to their promising application in several fields such as sensing and photonics. The extensive work in the last few years was focused on the observation of the chiroptical properties in binary Cd based systems. Herein, we report on the first evidence of ligand-induced chirality in silver indium sulfide semiconductor quantum dots. Ternary disulfide quantum dots are of great interest due to their remarkable optical properties and low toxicity. Non-stoichiometric silver indium sulfide quantum dots were produced via a room temperature coprecipitation in water, in the presence of cysteine as a capping agent. The obtained nanocrystals show a notable photoluminescence quantum yield of 0.24 in water dispersions. Several critical aspects of the nanocrystal growth and chemico-physical characterization, and the optimisation of the surface passivation by the chiral ligand in order to optimize the nanoparticle chirality are thoroughly investigated. Optical spectroscopy methods such as circular dichroism and luminescence as well as nuclear magnetic resonance techniques are exploited to analyze the coordination processes leading to the formation of the ligand-nanocrystal chiral interface. This study highlights the dynamic nature of the interaction between the nanocrystal surface and the chiral ligand and clarifies some fundamental aspects for the transfer and optimization of the chiroptical properties.

Fast and non-destructive neutron activation analysis for simultaneous determination of TiO2 and SiO2 in sunscreens with attention to regulatory and research issues.

A new instrumental neutron activation analysis (INAA) for the simultaneous determination of titanium (TiO2) and silica (SiO2) dioxide as UV-filters in sunscreens is described. Samples are encapsulated, neutron irradiated (30 s) and after a suitable decay (3 min), the induced 51Ti (T1/2 = 5.76 min) and 29Al (T1/2 = 6.56 min) radionuclides are measured for the emitted γ-ray fingerprint. Three applications were carried out: (i) screening study (analysis of commercial sunscreens in combination with single particle inductively coupled plasma mass spectrometry (sp-ICP-MS); (ii) research study (development of innovative UV-filters such as titanium dioxide or bismuth titanate loaded inorganic mesoporous silica nanoparticles, MSN); (iii) validation study (intercalibration of a spectrochemical method - inductively coupled plasma optical emission spectrometry, ICP-OES). Collectively, the nuclear method appears a powerful tool adequate for quantifying TiO2 and SiO2 in the above studies. The limited accessibility at the nuclear reactor for neutron activation is probably one of the reasons why the excellent characteristics of the nuclear technique are not always fully known and exploited in the industrial and research chemical world.

Facile Cellulase Immobilisation on Bioinspired Silica.

Cellulases are enzymes with great potential for converting biomass to biofuels for sustainable energy. However, their commercial use is limited by their costs and low reusability. Therefore, the scientific and industrial sectors are focusing on finding better strategies to reuse enzymes and improve their performance. In this work, cellulase from Aspergillus niger was immobilised through in situ entrapment and adsorption on bio-inspired silica (BIS) supports. To the best of our knowledge, this green effect strategy has never been applied for cellulase into BIS. In situ entrapment was performed during support synthesis, applying a one-pot approach at mild conditions (room temperature, pH 7, and water solvent), while adsorption was performed after support formation. The loading efficiency was investigated on different immobilisation systems by Bradford assay and FTIR. Bovine serum albumin (BSA) was chosen as a control to optimize cellulase loading. The residual activity of cellulase was analysed by the dinitro salicylic acid (DNS) method. Activity of 90% was observed for the entrapped enzyme, while activity of ~55% was observed for the adsorbed enzyme. Moreover, the supported enzyme systems were recycled five times to evaluate their reuse potential. The thermal and pH stability tests suggested that both entrapment and adsorption strategies can increase enzyme activity. The results highlight that the entrapment in BIS is a potentially useful strategy to easily immobilise enzymes, while preserving their stability and recycle potential.

High-Pressure Photoluminescence Properties of Cr3+-Doped LaGaO3 Perovskites Modulated by Pressure-Induced Phase Transition.

The photoluminescence properties of Cr3+-doped LaGaO3 perovskites are investigated by high-pressure spectroscopy. The pressure-induced phase transition from orthorhombic (Pbnm) to rhombohedral (R3̅c) at around 2 GPa is confirmed by Raman spectroscopy. Cr3+-doped LaGaO3 shows deep-red emission peaks around 730 nm due to the zero-phonon line (R-line) and the phonon sidebands, which correspond to Cr3+: 2Eg → 4A2g transitions in the ideal octahedral site and the Cr-Cr pair luminescence (N-line) under ambient condition. Under a high pressure, the R-line shifts to a lower energy at a rate of -13 cm-1/GPa. From the pressure dependence of photoluminescence excitation (PLE) spectra, it is suggested that the redshift of the R-line is caused by the decrease of Racah parameters B and C. Moreover, the N-line luminescence becomes stronger relative to the R-line with increasing pressure and the N-line/R-line can be used to monitor the phase transition pressure. Under a high pressure, the tilt angle of the GaO6 octahedral unit becomes smaller. It implies that the enhanced N-line luminescence is caused by the stronger superexchange interaction between Cr3+ ions due to the increased Cr-O-Cr bond angle closer to 180°.

Confined-Melting-Assisted Synthesis of Bismuth Silicate Glass-Ceramic Nanoparticles: Formation and Optical Thermometry Investigation.

Bismuth-based (nano)materials have been attracting increasing interest due to appealing properties such as high refractive indexes, intrinsic opacity, and structural distortions due to the stereochemistry of 6s2 lone pair electrons of Bi3+. However, the control over specific phases and strategies able to stabilize uniform bismuth-based (nano)materials is still a challenge. In this study, we employed the ability of bismuth to lower the melting point of silica to introduce a new synthetic approach able to confine the growth of bismuth-oxide-based materials into nanostructures. Combining in situ temperature-dependent synchrotron radiation X-ray powder diffraction (XRPD) with high-resolution transmission electron microscopy (HR-TEM) analyses, we demonstrate the evolution of a confined Bi2O3-SiO2 nanosystem from Bi2SiO5 to Bi4Si3O12 through a melting process. The silica shell acts as both a nanoreactor and a silicon source for the stabilization of bismuth silicate glass-ceramic nanocrystals keeping the original spherical shape. The exciton peak of Bi2SiO5 is measured for the first time allowing the estimation of its real energy gap. Moreover, based on a detailed spectroscopic investigation, we discuss the potential and the limitations of Nd3+-activated bismuth silicate systems as ratiometric thermometers. The synthetic strategy introduced here could be further explored to stabilize other bismuth-oxide-based materials, opening the way toward the growth of well-defined glass-ceramic nanoparticles.

Sodium niobate based hierarchical 3D perovskite nanoparticle clusters.

We report a microwave assisted synthesis of NaNbO3 perovskite mesocrystals with a hierarchical morphology formed by the self-assembly of nanoparticles in particle clusters. The synthesis method combines non-aqueous sol-gel synthesis and microwave heating in a single step process that allows us to isolate crystalline single phase NaNbO3 in few minutes. A detailed investigation of the effect of the reaction temperature on the crystallinity and morphology of the product was conducted. The synthesis stabilizes the unusual orthorhombic phase Pmma, a property that can be ascribed to the crystal size (24 nm). TEM and SAED analyses show that the hierarchical polycrystalline particles behave as single crystals, a feature related to a non-classical crystallization mechanism. Moreover, the optical bandgap of this NaNbO3 phase was estimated for the first time. The results suggest the potential of this synthetic procedure for the fast production of high quality tertiary oxide nanocrystals.

Pushing the Limit of Boltzmann Distribution in Cr3+-Doped CaHfO3 for Cryogenic Thermometry.

Luminescence Boltzmann thermometry is one of the most reliable techniques used to locally probe temperature in a contactless mode. However, to date, there is no report on cryogenic thermometers based on the highly sensitive and reliable Boltzmann-based 4T2 → 4A2/2E → 4A2 emission ratio of Cr3+. On the basis of structural information of the local HfO6 octahedral site we demonstrated the potential of the CaHfO3:Cr3+ system by combining deep theoretical and experimental investigation. The material exhibits simultaneous emission from both the 2E and 4T2 excited states, following the Boltzmann law in a cryogenic temperature range of 40-150 K. The promising thermometric performance corroborates the potential of CaHfO3:Cr3+ as a Boltzmann cryothermometer, being characterized by a high relative sensitivity (∼ 2%·K-1 at 40 K) and exceptional thermal resolution (0.045-0.77 K in the 40-150 K range). Moreover, by exploiting the flexibility of the 4T2-2E energy gap controlled by the crystal field of the local octahedral site, the design proposed herein could be expanded to develop new Cr3+-doped cryogenic thermometers.

Ratiometric Luminescent Thermometers with a Customized Phase-Transition-Driven Fingerprint in Perovskite Oxides.

The development of noncontact thermometers with self-control to specific temperatures to be used as control markers with an additional degree of reliability is a challenge in the field of thermal sensors. Herein, a strategy exploiting the wide tunability of an intrinsic feature of oxide perovskites such as the phase-transition temperature to design a new class of ratiometric luminescent thermometers is introduced. The structural and optical response to the thermal stimuli of LaGaO3:Nd3+ system is used as a prototype to show the unprecedented opportunity to combine the processes of two different regimes in the same compound, leading to a reliable optical thermal sensor with an intrinsic tell-tale sign at specific temperatures. High relative sensitivity, low temperature uncertainty, and good reproducibility, together with the need for a single calibration curve irrespective of the phase-transition temperature and the doping effects, attest the goodness of the thermometric performances. This work demonstrates the control of the phase-transition (orthorhombic ↔ rhombohedral) temperature, Tc, of lanthanum gallate in the 400-700 K range by carefully doping the perovskite structure, as a proof of concept for the design of customized thermometers characterized by a spectral shape change acting as a self-fingerprint for the Tc.

Bismuth titanate-based UV filters embedded mesoporous silica nanoparticles: Role of bismuth concentration in the self-sealing process.

The development of new safe inorganic UV filters to effectively protect the skin from ultraviolet (UV) radiation effects is an emerging issue. Bismuth titanate-based UV filters embedded into mesoporous silica nanoparticles (MSN) represent a new class of inorganic sunscreens, with excellent UVA and UVB shielding properties. In addition, the presence of bismuth ions promotes a self-sealing process, allowing (i) the entrapment of the active phases in the deepest core of the system and (ii) the formation of an external glassy silica layer with a consequent suppression of the photocatalytic activity. In this work, aimed at studying in detail the self-sealing mechanism and accessing the role of bismuth ions in the formation of the system, a series of samples impregnated with a different amount of bismuth were investigated. The self-sealing process already occurs at the lowest content of bismuth and the mechanism is demonstrated to be triggered by the ability of Bi to work as a low-melting point agent for silica. Finally, a sunscreen formulation containing the new UV filter was prepared and the Sun Protection Factor (SPF), the pH and the viscosity were measured, demonstrating the potential of the proposed material for large-scale applications.

Bi2SiO5@g-SiO2 upconverting nanoparticles: a bismuth-driven core-shell self-assembly mechanism.

Core-shell systems have attracted increasing interest among the research community in recent years due to their unique properties and structural features, and the development of new synthetic strategies is still a challenge. In this work, we have investigated lanthanide-doped Bi2SiO5 nanocrystal formation inside mesoporous silica nanoparticles (MSNs). The role of both synthesis temperature and concentration of the bismuth precursor impregnated into the MSNs is discussed, showing an unprecedented strategy for the simultaneous stabilization of a crystalline core and a glassy shell. Temperature dependent synchrotron radiation X-ray powder diffraction (SR-XRPD) and high resolution transmission electron microscopy (HR-TEM) analyses allow one to follow the crystalline core growth. A mechanism for the formation of a Bi2SiO5@g-SiO2 core-shell nanosystem is proposed. In addition, the easy tunability of the color output of the upconverting system is demonstrated by means of suitable doping lanthanide ions with potential applications in several fields.

Revisiting Cr3+-Doped Bi2Ga4O9 Spectroscopy: Crystal Field Effect and Optical Thermometric Behavior of Near-Infrared-Emitting Singly-Activated Phosphors.

The increasing interest in the development of ratiometric optical thermal sensors has led to a wide variety of new systems with promising properties. Among them, singly-doped ratiometric thermometers were recently demonstrated to be particularly reliable. With the aim to discuss the development of an ideal optical thermal sensor, a combined experimental and theoretical insight into the spectroscopy of the Bi2Ga4O9:Cr3+ system is reported showing the importance of an insightful analysis in a wide temperature range. Low-temperature photoluminescence analysis (from 10 K) and the temperature dependence of the lifetime investigation, together with the crystal field analysis and the modeling of the thermal quenching process, allow the estimation of key parameters such as the Debye temperature (cutoff frequency), the Huang-Rhys parameter, and the energy barrier between 2Eg and 4T2g. Additionally, by considering the reliable class of singly-doped ratiometric thermometers based on a couple of excited states obeying the Boltzmann law, the important role played by the absolute sensitivity was discussed and the great potential of Cr3+ singly-activated systems was demonstrated. The results may provide new guidelines for the design of reliable optical thermometers with outstanding and robust performances.

Formation and Controlled Growth of Bismuth Titanate Phases into Mesoporous Silica Nanoparticles: An Efficient Self-Sealing Nanosystem for UV Filtering in Cosmetic Formulation.

The application of nanosized inorganic UV filters in cosmetic field is limited by their high photocatalytic properties that could induce the degradation or dangerous transformation of the organic molecules in sunscreen formulations. To overcome this problem and simultaneously enlarge the window of filter's absorption, we propose the growth of bismuth titanates BixTiyOz into mesoporous silica nanoparticles (MSN). We investigated the chemical-physical properties by means of XRPD, TEM, UV-vis spectroscopy, N2 physisorption, XPS, and SF-ICP-MS analysis, while the influence on the environment was evaluated through photocatalytic tests. The growing process of this new nanosystem is discussed underlining the key role of the Bi3+ ion that, acting as a low-melting point agent for the silica framework, led to a self-sealing mechanism. The excellent UV shielding properties combined with a radical suppression of the photocatalytic activity make the proposed nanosystem a perfect candidate for the development of the next generation nanomaterials for sunscreen formulations.

Determining europium compositional fluctuations in partially stabilized zirconia nanopowders: a non-line-broadening-based method.

A method is reported for assessing the compositional fluctuations in a ceramic sample, based only on the determination of the crystalline lattice parameters. Pure tetragonal phase partially stabilized zirconia powders are synthesized through the co-precipitation method by incorporating 4% Eu(3+). The powder is subjected to compression cycles to promote the tetragonal-to-monoclinic transformation. The Rietveld analysis of the X-ray powder diffraction patterns, recorded after each compression cycle, gives information about the lattice parameters and monoclinic phase content. The determination of europium content in the residual tetragonal phase is accomplished considering the unit cell volume of t-ZrO2 using Vegard's law. Using this information the compositional fluctuations over the sample were determined by considering two possible distributions of lanthanide ion content in the powders: a Gaussian and a Log-normal one. It was found that the Gaussian distribution better fits the experimental data. It was eventually demonstrated that these results are physically meaningful.

Unexpected optical activity of cerium in Y2O3:Ce3+, Yb3+, Er3+ up and down-conversion system.

In this work we synthesized rare earth-doped yttria nanocrystals via the Pechini method. We used Ce(3+), Yb(3+) and Er(3+) as dopant ions and studied their behavior when they are simultaneously embedded in the yttrium oxide lattice. The tri-doped system exhibits both downshifting and up-converting properties, due to the presence of, respectively, cerium-erbium and ytterbium-erbium couples. Efforts were put into determination of the effects of the presence of increasing content of cerium. We synthesized a series of samples having the general formula (Y0.88-xCexYb0.1Er0.02)2O3, where x = 0.01, 0.02, 0.10, 0.20, and 0.40. The structural properties of the samples were analyzed by the X-ray powder diffraction (XRPD) technique and the morphological features were disclosed using transmission electron microscope (TEM) observations. Photoluminescence properties were tested by carrying out photoluminescence (PL) emission, photoluminescence excitation (PLE) and lifetime (LT) measurements.