RESUMO
The development of high-performance membranes selective for carbon dioxide is critically important for advancing energy-efficient carbon dioxide capture technologies. Although molecular sieves have long been attractive membrane materials, turning them into practical membrane applications has been challenging. Here, we introduce an innovative approach for crafting a polymeric molecular sieve membrane to achieve outstanding carbon dioxide separation performance while upholding the mechanical stability. First, a polymer molecular sieve membrane having high gas permeability and mechanical stability was fabricated from a judiciously designed polymer that is solution-processable, hyper-cross-linkable, and functionalizable. Then, the carbon dioxide selectivity was fine-tuned by the subsequent introduction of various amine-based carriers. Among the diverse amines, polyethyleneimine stands out by functionalizing the larger pore region while preserving ultramicropores, leading to improved carbon dioxide/dinitrogen separation performance. The optimized membrane demonstrates exceptional carbon dioxide/dinitrogen separation performance, outperforming other reported polymer molecular sieve membranes and even competing favorably with most carbon molecular sieve membranes reported to date.
RESUMO
Strategic design of nanostructures, such as the core-shell configuration, offers a promising avenue to harness the desired properties while mitigating the inherent limitations of individual materials. In our pursuit of synergizing the advantages of two distinct porous materials, namely, zeolites and metal-organic frameworks (MOFs), we aimed to develop the zeolite@MOF core-shell structures. To synthesize this targeted material while minimizing undesirable side reactions, we devised an innovative approach involving ion-exchange-induced crystallization and post-synthetic conversion. This method enabled the exclusive growth of a MOF on the zeolite surface. Specifically, we successfully crafted a CaA@ZIF-8 core-shell structure, employing it in the fabrication of mixed-matrix membranes for CO2 separation. Within this core-shell configuration, the ZIF-8 in the shell played a crucial role in enhancing the filler-polymer interfaces, leading to the development of defect-free membranes. Simultaneously, the CaA zeolite core exhibited a highly selective transport of CO2. The synergistic effects resulted in a membrane incorporating a CaA@ZIF-8 core-shell filler, which demonstrated a high CO2 permeability of 1142 Barrer and a CO2/CH4 selectivity of 43.3, significantly surpassing the established upper limits for polymeric membranes. Our findings underscore the potential of core-shell structures composed of microporous materials for achieving the coveted properties necessary for high-performance gas separation membranes.
RESUMO
Property optimization through orientation control of metal-organic framework (MOF) crystals that exhibit anisotropic crystal structures continues to garner tremendous interest. Herein, an electric field is utilized to post-synthetically control the orientation of conductive layered Cu3(HHTP)2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) crystals dispersed in an electronically insulating poly(ethylene glycol) diacrylate (PEGDA) oligomer matrix. Optical and electrical measurements are performed to investigate the impact of the electric field on the alignment of Cu3(HHTP)2 crystals and the formation of aggregated microstructures, which leads to an ≈5000-fold increase in the conductivity of the composite. Notably, the composite thin-films containing aligned Cu3(HHTP)2 crystals exhibit significant conductivity of ≈10-3 S cm-1 despite the low concentration (≈1 wt.%) of conductive Cu3(HHTP)2. The use of an electric field to align Cu3(HHTP)2 crystals can rapidly generate various desired patterns that exhibit on-demand tunable collective charge transport anisotropy. The findings provide valuable insights toward the manipulation and utilization of conductive MOFs with anisotropic crystal structures for various applications such as adhesive electrical interconnects and microelectronics.
RESUMO
Metal-organic frameworks (MOFs) represent crystalline materials constructed from combinations of metal and organic units to often yield anisotropic porous structures and physical properties. Postsynthetic methods to align the MOF crystals in bulk remain scarce yet tremendously important to fully utilize their structure-driven intrinsic properties. Herein, we present an unprecedented composite of liquid crystals (LCs) and MOFs and demonstrate the use of nematic LCs to dynamically control the orientation of MOF crystals with exceptional order parameters (as high as 0.965). Unique patterns formed through a facile multidirectional alignment of MOF crystals exhibit polarized fluorescence with the fluorescence intensity of a pattern dependent on the angle of a polarizer, offering potential use in various optical applications such as an optical security label. Further, the alignment mechanism indicates that the method is applicable to numerous combinations of MOFs and LCs, which include UV polymerizable LC monomers used to fabricate free-standing composite films.
RESUMO
BACKGROUND AND AIMS: Central to the pathogenesis of nonalcoholic fatty liver disease (NAFLD) is the accumulation of lipids in the liver and various fat tissues. We aimed to elucidate the mechanisms by which lipid droplets (LDs) in the liver and adipocytes are degraded by the autophagy-lysosome system and develop therapeutic means to modulate lipophagy, i.e., autophagic degradation of LDs. METHODS: We monitored the process in which LDs are pinched off by autophagic membranes and degraded by lysosomal hydrolases in cultured cells and mice. The autophagic receptor p62/SQSTM-1/Sequestosome-1 was identified as a key regulator and used as a target to develop drugs to induce lipophagy. The efficacy of p62 agonists was validated in mice to treat hepatosteatosis and obesity. RESULTS: We found that the N-degron pathway modulates lipophagy. This autophagic degradation initiates when the molecular chaperones including BiP/GRP78, retro-translocated from the endoplasmic reticulum, is N-terminally (Nt-) arginylated by ATE1 R-transferase. The resulting Nt-arginine (Nt-Arg) binds the ZZ domain of p62 associated with LDs. Upon binding to Nt-Arg, p62 undergoes self-polymerization and recruits LC3+ phagophores to the site of lipophagy, leading to lysosomal degradation. Liver-specific Ate1 conditional knockout mice under high fat diet developed severe NAFLD. The Nt-Arg was modified into small molecule agonists to p62 that facilitate lipophagy in mice and exerted therapeutic efficacy in obesity and hepatosteatosis of wild-type but not p62 knockout mice. CONCLUSIONS: Our results show that the N-degron pathway modulates lipophagy and provide p62 as a drug target to treat NAFLD and other diseases related with metabolic syndrome.
Assuntos
Hepatopatia Gordurosa não Alcoólica , Animais , Camundongos , Proteólise , Autofagia , Chaperona BiP do Retículo Endoplasmático , Obesidade/metabolismo , Camundongos KnockoutRESUMO
In the N-degron pathway, N-recognins recognize cognate substrates for degradation via the ubiquitin (Ub)-proteasome system (UPS) or the autophagy-lysosome system (hereafter autophagy). We have recently shown that the autophagy receptor SQSTM1/p62 (sequestosome 1) is an N-recognin that binds the N-terminal arginine (Nt-Arg) as an N-degron to modulate autophagic proteolysis. Here, we show that the N-degron pathway mediates pexophagy, in which damaged peroxisomal fragments are degraded by autophagy under normal and oxidative stress conditions. This degradative process initiates when the Nt-Cys of ACAD10 (acyl-CoA dehydrogenase family, member 10), a receptor in pexophagy, is oxidized into Cys sulfinic (CysO2) or sulfonic acid (CysO3) by ADO (2-aminoethanethiol (cysteamine) dioxygenase). Under oxidative stress, the Nt-Cys of ACAD10 is chemically oxidized by reactive oxygen species (ROS). The oxidized Nt-Cys2 is arginylated by ATE1-encoded R-transferases, generating the RCOX N-degron. RCOX-ACAD10 marks the site of pexophagy via the interaction with PEX5 and binds the ZZ domain of SQSTM1/p62, recruiting LC3+-autophagic membranes. In mice, knockout of either Ate1 responsible for Nt-arginylation or Sqstm1/p62 leads to increased levels of peroxisomes. In the cells from patients with peroxisome biogenesis disorders (PBDs), characterized by peroxisomal loss due to uncontrolled pexophagy, inhibition of either ATE1 or SQSTM1/p62 was sufficient to recover the level of peroxisomes. Our results demonstrate that the Cys-N-degron pathway generates an N-degron that regulates the removal of damaged peroxisomal membranes along with their contents. We suggest that tannic acid, a commercially available drug on the market, has a potential to treat PBDs through its activity to inhibit ATE1 R-transferases.Abbreviations: ACAA1, acetyl-Coenzyme A acyltransferase 1; ACAD, acyl-Coenzyme A dehydrogenase; ADO, 2-aminoethanethiol (cysteamine) dioxygenase; ATE1, arginyltransferase 1; CDO1, cysteine dioxygenase type 1; ER, endoplasmic reticulum; LIR, LC3-interacting region; MOXD1, monooxygenase, DBH-like 1; NAC, N-acetyl-cysteine; Nt-Arg, N-terminal arginine; Nt-Cys, N-terminal cysteine; PB1, Phox and Bem1p; PBD, peroxisome biogenesis disorder; PCO, plant cysteine oxidase; PDI, protein disulfide isomerase; PTS, peroxisomal targeting signal; R-COX, Nt-Arg-CysOX; RNS, reactive nitrogen species; ROS, reactive oxygen species; SNP, sodium nitroprusside; UBA, ubiquitin-associated; UPS, ubiquitinproteasome system.
Assuntos
Autofagia , Macroautofagia , Animais , Camundongos , Proteína Sequestossoma-1/metabolismo , Autofagia/fisiologia , Espécies Reativas de Oxigênio/metabolismo , Cisteamina , Cisteína , Ubiquitina/metabolismo , Arginina/metabolismo , Transferases/metabolismoRESUMO
Graphene oxide (GO), a carbonaceous 2D nanomaterial, has received significant interest as a next-generation membrane building block. To fabricate high-performance membranes, an effective strategy involves stacking GO nanosheets in laminated structures, thereby creating unique nanochannel galleries. One outstanding merit of laminar GO membranes is that their permselectivity is readily tunable by tailoring the size of the nanochannels. Here, a high-performance GO-based nanofiltration membrane was developed by intercalating an aromatic crosslinker, α,α/-dichloro-p-xylene (DCX), between the layers in laminated GO nanosheets. Owing to the formation of strong covalent bonds between the crosslinker and the GO, the resulting GO laminate membrane exhibited outstanding structural stability. Furthermore, due to the precisely controlled and enlarged interlayer spacing distance of the developed DCX-intercalated GO membrane, it achieved an over two-fold enhancement in water permeability (11 ± 2 LMH bar-1) without sacrificing the rejection performance for divalent ions, contrary to the case with a pristine GO membrane.
RESUMO
In this study, a novel polybenzimidazole (PBI)-based organic solvent nanofiltration (OSN) membrane possessing excellent stability under high pH condition was developed. To improve the chemical stability, the pristine PBI membrane was crosslinked with a silane precursor containing an epoxy end group. In detail, hydrolysis and condensation reaction of methoxysilane in the 3-glycidyloxypropyl trimethoxysilane (GPTMS) yields organic-inorganic networks within the PBI membrane structure. At the same time, the epoxy end groups on the organosiloxane network (Si-O-Si) reacted with amine groups of PBI to complete the crosslinking. The resulting crosslinked PBI membrane exhibited a good stability upon exposure to organic solvents and was not decomposed even in basic solution (pH 13). Our membrane showed an ethanol permeance of 27.74 LMHbar-1 together with a high eosin Y rejection of >90% under 10 bar operation pressure at room temperature. Furthermore, our PBI membrane was found to be operational even under an extremely basic condition, although the effective pore size was slightly enlarged due to the pore swelling effect. The results suggest that our membrane is a promising candidate for OSN application under basic conditions.
RESUMO
Light hydrocarbons, obtained through the petroleum refining process, are used in numerous applications. The separation of the various light hydrocarbons is challenging and expensive due to their similar melting and boiling points. Alternative methods have been investigated to supplement cryogenic distillation, which is energy intensive. Membrane technology, on the other hand, can be an attractive alternative in light hydrocarbon separation as a phase change that is known to be energy-intensive is not required during the separation. In this regard, this study focuses on recent advances in mixed-matrix membranes (MMMs) for light hydrocarbon (C1-C3) separation based on gas permeability and selectivity. Moreover, the future research and development direction of MMMs in light hydrocarbon separation is discussed, considering the low intrinsic gas permeability of polymeric membranes.
RESUMO
This Special Issue, entitled "Emerging Materials for Mixed-Matrix Membranes" was introduced to cover the recent progress in the development of materials for mixed-matrix membranes (MMMs) with potential application in fields such as sea water desalination, gas separation, pharmaceutical separation, wastewater treatment and the removal of pathogenic (viruses and bacteria) microorganisms as well as solvents and resource recovery [...].
RESUMO
The use of Prussian blue analogues (PBA) materials in electrochemical energy storage and harvesting has gained much interest, necessitating the further clarification of their electrochemical characteristics. However, there is no well-defined technique for manufacturing PBA-based microelectrochemical devices because the PBA film deposition method has not been well studied. In this study, we developed the following deposition method for growing copper hexacyanoferrate (CuHCFe) thin film: copper thin film is immersed into a potassium hexacyanoferrate solution, following which the redox reaction induces the spontaneous deposition of CuHCFe thin film on the copper thin film. The film grown via this method showed compatibility with conventional photolithography processes, and the micropattern of the CuHCFe thin film was successfully defined by a lift-off process. A microelectrochemical device based on the CuHCFe thin film was fabricated via micropatterning, and the sodium ion diffusivity in CuHCFe was measured. The presented thin film deposition method can deposit PBAs on any surface, including insulating substrates, and it can extend the utilization of PBA thin films to various applications.
RESUMO
Three different zeolite nanocrystals (SAPO-34, PS-MFI and ETS-10) were incorporated into the polymer matrix (Matrimid® 5218) as polymer precursors, with the aim of fabricating mixed-matrix carbon molecular sieve membranes (CMSMs). These membranes are investigated for their potential for air separation process. Based on our gas permeation results, incorporating porous materials is feasible to improve O2 permeability, owing to the creation of additional porosities in the resulting mixed-matrix CMSMs. Owing to this, the performance of the CMSM with 30 wt% PS-MFI loading is able to surpass the upper bound limit. This study demonstrates the feasibility of zeolite nanocrystals in improving O2/N2 separation performance in CMSMs.
RESUMO
To improve the CO2/N2 separation performance, mixed-matrix carbon molecular sieve membranes (mixed-matrix CMSMs) were fabricated and tested. Two carbon-based fillers, graphene oxide (GO) and activated carbon (YP-50F), were separately incorporated into two polymer precursors (Matrimid® 5218 and ODPA-TMPDA), and the resulting CMSMs demonstrated improved CO2 permeability. The improvement afforded by YP-50F was more substantial due to its higher accessible surface area. Based on the gas permeation data and the Robeson plot for CO2/N2 separation, the performances of the CMSMs containing 15 wt % YP-50F and 15 wt % GO in the mixed polymer matrix surpassed the 2008 Robeson upper bound of polymeric membranes. Hence, this study demonstrates the feasibility of such membranes in improving the CO2/N2 separation performance through the appropriate choice of carbon-based filler materials in polymer matrices.
RESUMO
Batteries for contact lenses fabricated by conventional methods could cause severe damage to the eyes if broken. Herein, we present flexible aqueous batteries that operate in tears and provide a safe power supply to smart contact lenses. Nanocomposite flexible electrodes of carbon nanotubes and Prussian blue analogue nanoparticles for cathode and anode were embedded in UV-polymerized hydrogel as not only a soft contact lens but also an ion-permeable separator. The battery exhibited a discharging capacity of 155 µAh in an aqueous electrolyte of 0.15 M Na-ions and 0.02 M K-ions, equivalent to the ionic concentration of tears. The power supply was enough to operate a low-power static random-access memory. In addition, we verified the mechanical stability, biocompatibility and compatibility with a contact lens cleaning solution. It could ultimately enable a safe power supply for smart contact lenses without risk of injury due to the leakage or breakage of the battery.
Assuntos
Lentes de Contato Hidrofílicas , Nanocompostos , Nanotubos de Carbono , Fontes de Energia Elétrica , Ferrocianetos , LágrimasRESUMO
Hydrogen (H2) is an industrial gas that has showcased its importance in several well-known processes such as ammonia, methanol and steel productions, as well as in petrochemical industries. Besides, there is a growing interest in H2 production and purification owing to the global efforts to minimize the emission of greenhouse gases. Nevertheless, H2 which is produced synthetically is expected to contain other impurities and unreacted substituents (e.g., carbon dioxide, CO2; nitrogen, N2 and methane, CH4), such that subsequent purification steps are typically required for practical applications. In this context, membrane-based separation has attracted a vast amount of interest due to its desirable advantages over conventional separation processes, such as the ease of operation, low energy consumption and small plant footprint. Efforts have also been made for the development of high-performance membranes that can overcome the limitations of conventional polymer membranes. In particular, the studies on graphene-based membranes have been actively conducted most recently, showcasing outstanding H2-separation performances. This review focuses on the recent progress and potential challenges in graphene-based membranes for H2 purification.
RESUMO
Nanocrystalline UiO-66 and its derivatives (containing -NH2, -Br, -(OH)2) were developed via pre-synthetic functionalization and incorporated into a polyimide membrane to develop a mixed-matrix membrane (MMM) for CO2/N2 separation. Incorporation of the non-functionalized UiO-66 nanocrystals into the polyimide membrane successfully improved CO2 permeability, with a slight decrease in CO2/N2 selectivity, owing to its large accessible surface area. The addition of other functional groups further improved the CO2/N2 selectivity of the polymeric membrane, with UiO-66-NH2, UiO-66-Br, and UiO-66-(OH)2 demonstrating improvements of 12%, 4%, and 17%, respectively. Further evaluation by solubility-diffusivity analysis revealed that the functionalized UiO-66 in MMMs can effectively increase CO2 diffusivity while suppressing N2 sorption, thus, resulting in improved CO2/N2 selectivity. Such results imply that the structural tuning of UiO-66 by the incorporation of various functional groups is an effective strategy to improve the CO2 separation performance of MMMs.
RESUMO
Membranes for organic solvent nanofiltration (OSN) or solvent-resistant nanofiltration (SRNF) offer unprecedented opportunities for highly efficient and cost-competitive solvent recovery in the pharmaceutical industry. Here, we describe small-flake graphene oxide (SFGO) membranes for high-performance OSN applications. Our strategy exploits lateral dimension control to engineer shorter and less tortuous transport pathways for solvent molecules. By using La3+ as a cross-linker and spacer for intercalation, the SFGO membrane selective layer was stabilized, and size-dependent ultrafast selective molecular transport was achieved. The methanol permeance was up to 2.9-fold higher than its large-flake GO (LFGO) counterpart, with high selectivity toward three organic dyes. More importantly, the SFGO-La3+ membrane demonstrated robust stability for at least 24 hours under hydrodynamic stresses that are representative of realistic OSN operating conditions. These desirable attributes stem from the La3+ cross-linking, which forms uniquely strong coordination bonds with oxygen-containing functional groups of SFGO. Other cations were found to be ineffective.
RESUMO
MXenes are emerging rapidly as a new family of multifunctional nanomaterials with prospective applications rivaling that of graphenes. Herein, a timely account of the design and performance evaluation of MXene-based membranes is provided. First, the preparation and physicochemical characteristics of MXenes are outlined, with a focus on exfoliation, dispersion stability, and processability, which are crucial factors for membrane fabrication. Then, different formats of MXene-based membranes in the literature are introduced, comprising pristine or intercalated nanolaminates and polymer-based nanocomposites. Next, the major membrane processes so far pursued by MXenes are evaluated, covering gas separation, wastewater treatment, desalination, and organic solvent purification. The potential utility of MXenes in phase inversion and interfacial polymerization, as well as layer-by-layer assembly for the preparation of nanocomposite membranes, is also critically discussed. Looking forward, exploiting the high electrical conductivity and catalytic activity of certain MXenes is put into perspective for niche applications that are not easily achievable by other nanomaterials. Furthermore, the benefits of simulation/modeling approaches for designing MXene-based membranes are exemplified. Overall, critical insights are provided for materials science and membrane communities to navigate better while exploring the potential of MXenes for developing advanced separation membranes.
RESUMO
Carbon nanotubes (CNTs) with hydrophobic and atomically smooth inner channels are promising for building ultrahigh-flux nanofluidic platforms for energy harvesting, health monitoring, and water purification. Conventional wisdom is that nanoconfinement effects determine water transport in CNTs. Here, using full-atomistic molecular dynamics simulations, it is shown that water transport behavior in CNTs strongly correlates with the electronic properties of single-walled CNTs (metallic (met) vs semiconducting (s/c)), which is as dominant as the effect of nanoconfinement. Three pairs of CNTs (i.e., (8,8)met , 10.85 Å vs (9,7)s/c , 10.88 Å; (9,8)s/c , 11.53 Å vs (10,7)met , 11.59 Å; and (9,9)met , 12.20 Å vs (10,8)s/c , 12.23 Å) are used to investigate the roles of diameter and metallicity. Specifically, the (9,8)s/c can restrict the hydrogen-bonding-mediated structuring of water and give the highest reduction in carbon-water interaction energy, providing an extraordinarily high water flux, around 250 times that of the commercial reverse osmosis membranes and approximately fourfold higher than the flux of the state-of-the-art boron nitrate nanotubes. Further, the high performance of (9,8)s/c is also reproducible when embedded in lipid bilayers as synthetic high-water flux porins. Given the increasing availability of high-purity CNTs, these findings provide valuable guides for realizing novel CNT-enhanced nanofluidic systems.
RESUMO
The energy-intensive ethylene/ethane separation process is a key challenge to the petrochemical industry. HKUST-1, a metal-organic framework (MOF) which possesses high accessible surface area and porosity, is utilized in mixed-matrix membrane fabrication to investigate its potential for improving the performance for C2H4/C2H6 separation. Prior to membrane fabrication and gas permeation analysis, nanocrystal HKUST-1 was first synthesized. This step is critical in order to ensure that defect-free mixed-matrix membranes can be formed. Then, polyimide-based polymers, ODPA-TMPDA and 6FDA-TMPDA, were chosen as the matrices. Our findings revealed that 20 wt% loading of HKUST-1 was capable of improving C2H4 permeability (155% for ODPA-TMPDA and 69% for 6FDA-TMPDA) without excessively sacrificing the C2H4/C2H6 selectivity. The C2H4 and C2H6 diffusivity, as well as solubility, were also improved substantially as compared to the pure polymeric membranes. Overall, our results edge near the upper bound, confirming the effectiveness of leveraging nanocrystal HKUST-1 filler for performance enhancements in mixed-matrix membranes for C2H4/C2H6 separation.