Selenium-alloyed tellurium oxide for amorphous p-channel transistors.

Compared to polycrystalline semiconductors, amorphous semiconductors offer inherent cost-effective, simple and uniform manufacturing. Traditional amorphous hydrogenated Si falls short in electrical properties, necessitating the exploration of new materials. The creation of high-mobility amorphous n-type metal oxides, such as a-InGaZnO (ref. 1), and their integration into thin-film transistors (TFTs) have propelled advancements in modern large-area electronics and new-generation displays2-8. However, finding comparable p-type counterparts poses notable challenges, impeding the progress of complementary metal-oxide-semiconductor technology and integrated circuits9-11. Here we introduce a pioneering design strategy for amorphous p-type semiconductors, incorporating high-mobility tellurium within an amorphous tellurium suboxide matrix, and demonstrate its use in high-performance, stable p-channel TFTs and complementary circuits. Theoretical analysis unveils a delocalized valence band from tellurium 5p bands with shallow acceptor states, enabling excess hole doping and transport. Selenium alloying suppresses hole concentrations and facilitates the p-orbital connectivity, realizing high-performance p-channel TFTs with an average field-effect hole mobility of around 15 cm2 V-1 s-1 and on/off current ratios of 106-107, along with wafer-scale uniformity and long-term stabilities under bias stress and ambient ageing. This study represents a crucial stride towards establishing commercially viable amorphous p-channel TFT technology and complementary electronics in a low-cost and industry-compatible manner.

Nondestructive Direct Optical Patterning of Perovskite Nanocrystals with Carbene-Based Ligand Cross-Linkers.

Microscale patterning of colloidal perovskite nanocrystals (NCs) is essential for their integration in advanced device platforms, such as high-definition displays. However, perovskite NCs usually show degraded optical and/or electrical properties after patterning with existing approaches, posing a critical challenge for their optoelectronic applications. Here we achieve nondestructive, direct optical patterning of perovskite NCs with rationally designed carbene-based cross-linkers and demonstrate their applications in high-performance light-emitting diodes. We reveal that both the photochemical properties and the electronic structures of cross-linkers need to be carefully tailored to the material properties of perovskite NCs. This method produces high-resolution (∼4000 ppi) NC patterns with preserved photoluminescent quantum efficiencies and charge transport properties. Prototype light-emitting diodes with patterned/cross-linked NC layers show a maximum luminance of over 60000 cd m-2 and a peak external quantum efficiency of 16%, among the highest for patterned perovskite electroluminescent devices. Such a material-adapted patterning method enabled by designs from a photochemistry perspective could foster the applications of perovskite NCs in system-level electronic and optoelectronic devices.

Carbon quantum dots assisted BiFeO3@BiOBr S-scheme heterojunction enhanced peroxymonosulfate activation for the photocatalytic degradation of imidacloprid under visible light: Performance, mechanism and biotoxicity.

A novel S-scheme heterojunction photocatalyst carbon quantum dots (CQDs)/BiFeO3/BiOBr (CBB) was synthesized via a facile hydrothermal method, which was highly effective in activating peroxymonosulfate (PMS) to photodegrade imidacloprid (IMD) (one of the typical neonicotinoid insecticides (NEOs)) under visible light irradiation. Based on the physicochemical and photoelectrochemical analysis, the super photocatalytic performance of the CBB photocatalyst was contributed to the enhanced separation and transfer of photogenerated electrons (e-) and holes (h+), the activation of PMS by reactive species, and the wider light absorption range induced by CQDs. Moreover, the intermediate products and possible photodegradation pathways of IMD were confirmed through high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS) detection and density functional theory (DFT) calculations. Although the photodegradation of IMD in the CBB/PMS/Vis system can be affected by the water quality parameters (i.e., acid group anions, pH, and the presence of humic acid (HA)), the synthesized CBB photocatalyst showed excellent photocatalytic performance in multiple natural water samples. This study provides a new idea to construct an effective and efficient heterojunction photocatalyst, which may have great advantages in photocatalytic degradation of NEOs and possibly other emerging contaminants in the aquatic environment.

Ligand-Induced Cation-π Interactions Enable High-Efficiency, Bright, and Spectrally Stable Rec. 2020 Pure-Red Perovskite Light-Emitting Diodes.

Achieving high-performance perovskite light-emitting diodes (PeLEDs) with pure-red electroluminescence for practical applications remains a critical challenge because of the problematic luminescence property and spectral instability of existing emitters. Herein, high-efficiency Rec. 2020 pure-red PeLEDs, simultaneously exhibiting exceptional brightness and spectral stability, based on CsPb(Br/I)3 perovskite nanocrystals (NCs) capping with aromatic amino acid ligands featuring cation-π interactions, are reported. It is proven that strong cation-π interactions between the PbI6 -octahedra of perovskite units and the electron-rich indole ring of tryptophan (TRP) molecules not only chemically polish the imperfect surface sites, but also markedly increase the binding affinity of the ligand molecules, leading to high photoluminescence quantum yields and greatly enhanced spectral stability of the CsPb(Br/I)3 NCs. Moreover, the incorporation of small-size aromatic TRP ligands ensures superior charge-transport properties of the assembled emissive layers. The resultant devices emitting at around 635 nm demonstrate a champion external quantum efficiency of 22.8%, a max luminance of 12 910 cd m-2 , and outstanding spectral stability, representing one of the best-performing Rec. 2020 pure-red PeLEDs achieved so far.

A platform for integrated spectrometers based on solution-processable semiconductors.

Acquiring real-time spectral information in point-of-care diagnosis, internet-of-thing, and other lab-on-chip applications require spectrometers with hetero-integration capability and miniaturized feature. Compared to conventional semiconductors integrated by heteroepitaxy, solution-processable semiconductors provide a much-flexible integration platform due to their solution-processability, and, therefore, more suitable for the multi-material integrated system. However, solution-processable semiconductors are usually incompatible with the micro-fabrication processes. This work proposes a facile and universal platform to fabricate integrated spectrometers with semiconductor substitutability by unprecedently involving the conjugated mode of the bound states in the continuum (conjugated-BIC) photonics. Specifically, exploiting the conjugated-BIC photonics, which remains unexplored in conventional lasing studies, renders the broadband photodiodes with ultra-narrowband detection ability, detection wavelength tunability, and on-chip integration ability while ensuring the device performance. Spectrometers based on these ultra-narrowband photodiode arrays exhibit high spectral resolution and wide/tunable spectral bandwidth. The fabrication processes are compatible with solution-processable semiconductors photodiodes like perovskites and quantum dots, which can be potentially extended to conventional semiconductors. Signals from the spectrometers directly constitute the incident spectra without being computation-intensive, latency-sensitive, and error-intolerant. As an example, the integrated spectrometers based on perovskite photodiodes are capable of realizing narrowband/broadband light reconstruction and in-situ hyperspectral imaging.

Impact Mechanisms of Humic Acid on the Transmembrane Transport of Per- and Polyfluoroalkyl Substances in Wheat at the Subcellular Level: The Important Role of Slow-Type Anion Channels.

Per- and polyfluoroalkyl substances (PFASs) have potential to accumulate in crops and pose health risks to humans, but it is unclear how the widely present organic matters in soil, such as humic acid (HA), affect their uptake and translocation in plants. In this study, hydroponic experiments were conducted to systematically disclose the impacts of HA on the uptake, translocation, and transmembrane transport at the subcellular level of four PFASs, including perfluorooctane sulfonic acid, perfluorooctanoic acid, perfluorohexane sulfonic acid, and 6:2 chlorinated polyfluoroalkyl ether sulfonate in wheat (Triticum aestivum L.). The results of the uptake and depuration experiments indicated that HA depressed the adsorption and absorption of PFASs in wheat roots by reducing the bioavailability of PFASs, and HA did not affect the long-range transport of PFASs to be eliminated via the phloem of wheat. However, HA facilitated their transmembrane transport in wheat roots, while the contrary effect was observed in the shoots. The inhibitor experiments coupled with transcriptomics analysis uncover that the increased transmembrane transport of PFASs stimulated by HA is mainly driven by the slow-type anion channel pathways interacting with Ca2+-dependent protein kinases (Ca2+-CDPK-SLAC1). The promoted transmembrane transport of PFASs might cause adverse effects on the plant cell wall, which causes further concerns.

A clinical study on the nutritional status of patients with locally advanced rectal cancer during chemo-radiotherapy.

BACKGROUND: Rectal cancer is one of the most common gastrointestinal malignancies, and most cases include locally advanced cancers at the time of diagnosis (stage II/III). OBJECTIVES: The purpose of this study is to observe the dynamic changes in the nutritional status of patients with locally advanced rectal cancer during concurrent radiation therapy and chemotherapy and to evaluate the nutritional risk and incidence of malnutrition in these patients. METHODS: A total of 60 patients with locally advanced rectal cancer were enrolled in this study. The 2002 Nutritional Risk Screening and Patient-Generated Subjective Global Assessment Scales (PG-SGA) were used to assess nutritional risk and status. The European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire (QLQ) - C30 and QLQ-CR38 scales were used for the quality of life evaluation. Toxicity was evaluated using the CTC 3.0 standard. RESULTS: The incidence of nutritional risk among these 60 patients was 38.33% (23 of 60) before and 53% (32 of 60) after concurrent chemo-radiotherapy. There were 28 patients in the well-nourished group, with a PG-SGA score of <2 points, and 17 patients in the nutrition-changed group, with a PG-SGA score of <2 points before and 2 points during and after chemo-radiotherapy. In the well-nourished group, the incidence of nausea, vomiting and diarrhea mentioned in the summary was lower and the expectations for the future (according to the QLQ-CR30 and QLQ-CR28 scales) were higher than in the undernourished group. The undernourished group required delayed treatment more often and experienced nausea, vomiting and diarrhea earlier and for longer than the well-nourished group. These results show that the quality of life of the well-nourished group was better. CONCLUSIONS: There is a degree of nutritional risk and deficiency in patients with locally advanced rectal cancer. Chemoradiotherapy increases the incidence of nutritional risk and deficiencies. KEY WORDS: Enteral nutrition, Colorectal neoplasms, Quality of life, Chemo-radiotherapy, EORTC.

Ionic specificity mediates the transport and retention of graphene-based nanomaterials in saturated porous media.

Transport of graphene-based nanomaterials in porous media is closely related to background cations. This study examines the impacts of ionic specificity on the mobility of graphene oxide (GO) and reduced GO (RGOs) in saturated quartz sand. The transport of GO/RGOs as affected by monovalent cation Na+ followed extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, whereas in solutions containing multivalent cations Zn2+ and Al3+, cation bridging effect played a dominant role in the transport inhibition. Moreover, the adverse effects of the divalent cations on GO/RGOs migration obeyed the Hofmeister series, i.e. following the order of Pb2+ > Cd2+ > Zn2+. Batch adsorption experiments and DFT calculations further confirmed that cations of higher valences, and of the same valence but with larger ionic radii (smaller hydrated radii) interacted more strongly with GO/RGOs and sand grains via forming inner-sphere complexes. Thus, more favorable retention was observed through cation bridging between particles and collectors, and also via enhanced straining caused by particles aggregation. Furthermore, the sulfide-reduced GO (SR-GO) that contained more surface O-functional groups was impacted more remarkably by strong complexing cations than the pristine GO (P-GO), while the mobility of poorly functionalized irradiation-reduced GO (IR-GO) was less affected by cation bridging effect.

Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells.

Record power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) have been obtained with the organic hole transporter 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine)9,9'-spirobifluorene (spiro-OMeTAD). Conventional doping of spiro-OMeTAD with hygroscopic lithium salts and volatile 4-tert-butylpyridine is a time-consuming process and also leads to poor device stability. We developed a new doping strategy for spiro-OMeTAD that avoids post-oxidation by using stable organic radicals as the dopant and ionic salts as the doping modulator (referred to as ion-modulated radical doping). We achieved PCEs of >25% and much-improved device stability under harsh conditions. The radicals provide hole polarons that instantly increase the conductivity and work function (WF), and ionic salts further modulate the WF by affecting the energetics of the hole polarons. This organic semiconductor doping strategy, which decouples conductivity and WF tunability, could inspire further optimization in other optoelectronic devices.

The number of cycles of adjuvant chemotherapy in stage III and high-risk stage II rectal cancer: a nomogram and recursive partitioning analysis.

OBJECTIVE: The prognostic role of the number of cycles of adjuvant chemotherapy (ACT) after total mesorectal excision in stage III and high-risk stage II rectal cancer is unknown. As a result of this, our study was designed to assess the effect of the number of cycles of ACT on the prediction of cancer-specific survival. METHODS: Four hundred patients that were diagnosed as stage III and high-risk stage II rectal cancer from January 2012 to January 2018 and who had received total mesorectal excision were enrolled in this study. A nomogram incorporating the number of cycles of ACT was also developed in this study. For internal validation, the bootstrap method was used and the consistency index was used to evaluate the accuracy of the model. The patients were stratified into risk groups according to their tumor characteristics by recursive partitioning analysis. RESULTS: We found that the risk of death was decreased by 26% (HR = 0.74, 95% CI: 0.61-0.89, P = 0.0016) with each increasing ACT cycle. The N stage, positive lymph node ratio (PLNR), carcinoembryonic antigen, neutrophil-to-lymphocyte ratio, and the number of cycles of ACT were chosen and entered into the nomogram model. Recursive partitioning analysis-based risk stratification revealed a significant difference in the prognosis in rectal cancer patients with high-risk, intermediate-risk, and low-risk (3-year cancer-specific survival: 0.246 vs. 0.795 vs. 0.968, P < 0.0001). Seven or more cycles of ACT yielded better survival in patients with PLNR ≥ 0.28 but not in patients with PLNR < 0.28. CONCLUSION: In conclusion, the nomogram prognosis model based on the number of cycles of ACT predicted individual prognosis in rectal cancer patients who had undergone total mesorectal excision. These findings further showed that in patients with PLNR ≥ 0.28, no fewer than 7 cycles of ACT are needed to significantly reduce the patient's risk of death.

High-performance hysteresis-free perovskite transistors through anion engineering.

Despite the impressive development of metal halide perovskites in diverse optoelectronics, progress on high-performance transistors employing state-of-the-art perovskite channels has been limited due to ion migration and large organic spacer isolation. Herein, we report high-performance hysteresis-free p-channel perovskite thin-film transistors (TFTs) based on methylammonium tin iodide (MASnI3) and rationalise the effects of halide (I/Br/Cl) anion engineering on film quality improvement and tin/iodine vacancy suppression, realising high hole mobilities of 20 cm2 V-1 s-1, current on/off ratios exceeding 107, and threshold voltages of 0 V along with high operational stabilities and reproducibilities. We reveal ion migration has a negligible contribution to the hysteresis of Sn-based perovskite TFTs; instead, minority carrier trapping is the primary cause. Finally, we integrate the perovskite TFTs with commercialised n-channel indium gallium zinc oxide TFTs on a single chip to construct high-gain complementary inverters, facilitating the development of halide perovskite semiconductors for printable electronics and circuits.

Development and Internal Validation of a Nomogram-Based Model to Predict Three-Year and Five-Year Overall Survival in Patients with Stage II/III Colon Cancer.

OBJECTIVE: The aim of this study was to develop a nomogram-based model to predict the three-year and five-year overall survival (OS) of patients with stage II/III colon cancer following radical resection. METHODS: A total of 1156 patients with stage II/III colon cancer who underwent radical resection at the Affiliated Hospital of Guizhou Medical University between December 2012 and December 2018 were enrolled. Lasso regression was used to screen out 12 variables: age, prealbumin, albumin, degree of differentiation, total tumor-node-metastasis (TNM) stage, T stage, N stage, prognostic nutritional index (PNI), platelet/lymphocyte count, carcinoembryonic antigen, carbohydrate antigen 19-9 (CA19-9), and postoperative adjuvant chemotherapy. The data set was then randomly split into a modeling set and a validation set, and the bootstrap method was used to verify the internal validity of the final model. A nomogram was then used to present the model, and the risk groups were categorized according to the total score in the nomogram. RESULTS: This study established and developed a simple, easy-to-use predictive model that included age, degree of differentiation, N stage, CA19-9, PNI, and postoperative chemotherapy as variables. In the multivariate Cox regression analysis, only postoperative chemotherapy was identified as an independent risk factor for death in patients with colon cancer. The receiver operating characteristic curve showed that the model demonstrated good resolution, with an area under the curve of 0.803. Decision curve analysis indicated that the model had a good positive net gain, and the bootstrap method was used to verify its stability. In the OS rate, the C-index was 0.78. According to the total score of the nomogram, the risk group was layered by drawing the Kaplan-Meier (K-M) curve. In the three-year OS K-M curve, the survival rates of the low-risk group, the medium-risk group, and the high-risk group were 96%, 93%, and 82%, respectively. In the five-year OS K-M curve, the survival rates of the low-risk group, the medium-risk group, and the high-risk group were 94%, 90%, and 73%, respectively. CONCLUSION: The nomogram-based prediction model developed in this study is stable and has good resolution, reliability, and net gain. It will therefore be useful for clinicians performing risk stratification and postoperative monitoring and in the development of personalized treatment options for patients with stage II/III colon cancer.

Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters.

Molecular additives are widely utilized to minimize non-radiative recombination in metal halide perovskite emitters due to their passivation effects from chemical bonds with ionic defects. However, a general and puzzling observation that can hardly be rationalized by passivation alone is that most of the molecular additives enabling high-efficiency perovskite light-emitting diodes (PeLEDs) are chelating (multidentate) molecules, while their respective monodentate counterparts receive limited attention. Here, we reveal the largely ignored yet critical role of the chelate effect on governing crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses. Specifically, we discover that the chelate effect enhances lead-additive coordination affinity, enabling the formation of thermodynamically stable intermediate phases and inhibiting halide coordination-driven perovskite nucleation. The retarded perovskite nucleation and crystal growth are key to high crystal quality and thus efficient electroluminescence. Our work elucidates the full effects of molecular additives on PeLEDs by uncovering the chelate effect as an important feature within perovskite crystallization. As such, we open new prospects for the rationalized screening of highly effective molecular additives.

Highly Luminescent and Stable CsPbI3 Perovskite Nanocrystals with Sodium Dodecyl Sulfate Ligand Passivation for Red-Light-Emitting Diodes.

CsPbI3 perovskite nanocrystals (NCs) have recently emerged as promising materials for optoelectronic devices because of their superior properties. However, the poor stability of the CsPbI3 NCs induced by easy ligand desorption represents a key issue limiting their practical applications. Herein, we report stable and highly luminescent black-phase CsPbI3 NCs passivated by novel ligands of sodium dodecyl sulfate (SDS). Theoretical calculation results reveal a stronger adsorption energy of SDS molecules at the CsPbI3 surface than that of commonly used oleic acid. As a result, the defect formation caused by the ligand loss during the purification process is greatly suppressed. The optimized SDS-CsPbI3 NCs exhibit significantly reduced surface defects, much enhanced stability, and superior photoluminescence efficiency. The red perovskite light-emitting diodes based on the SDS-CsPbI3 NCs demonstrate an external quantum efficiency of 8.4%, which shows a 4-fold improvement compared to the devices based on the oleic acid-modified CsPbI3 NCs.

Mixed halide perovskites for spectrally stable and high-efficiency blue light-emitting diodes.

Bright and efficient blue emission is key to further development of metal halide perovskite light-emitting diodes. Although modifying bromide/chloride composition is straightforward to achieve blue emission, practical implementation of this strategy has been challenging due to poor colour stability and severe photoluminescence quenching. Both detrimental effects become increasingly prominent in perovskites with the high chloride content needed to produce blue emission. Here, we solve these critical challenges in mixed halide perovskites and demonstrate spectrally stable blue perovskite light-emitting diodes over a wide range of emission wavelengths from 490 to 451 nanometres. The emission colour is directly tuned by modifying the halide composition. Particularly, our blue and deep-blue light-emitting diodes based on three-dimensional perovskites show high EQE values of 11.0% and 5.5% with emission peaks at 477 and 467 nm, respectively. These achievements are enabled by a vapour-assisted crystallization technique, which largely mitigates local compositional heterogeneity and ion migration.

Metal halide perovskites for light-emitting diodes.

Metal halide perovskites have shown promising optoelectronic properties suitable for light-emitting applications. The development of perovskite light-emitting diodes (PeLEDs) has progressed rapidly over the past several years, reaching high external quantum efficiencies of over 20%. In this Review, we focus on the key requirements for high-performance PeLEDs, highlight recent advances on materials and devices, and emphasize the importance of reliable characterization of PeLEDs. We discuss possible approaches to improve the performance of blue and red PeLEDs, increase the long-term operational stability and reduce toxicity hazards. We also provide an overview of the application space made possible by recent developments in high-efficiency PeLEDs.

Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport.

Perovskite quantum-dot-based light-emitting diodes (QLEDs) are highly promising for future solid-state lightings and high-definition displays due to their excellent color purity. However, their device performance is easily affected by charge accumulation induced luminescence quenching due to imbalanced charge injection in the devices. Here we report green perovskite QLEDs with simultaneously improved efficiency and operational lifetime through balancing the charge injection with the employment of a bilayered electron transport structure. The charge-balanced QLEDs exhibit a color-saturated green emission with a full-width at half-maximum (FWHM) of 18 nm and a peak at 520 nm, a low turn-on voltage of 2.0 V and a champion external quantum efficiency (EQE) of 21.63%, representing one of the most efficient perovskite QLEDs so far. In addition, the devices with modulated charge balance demonstrate a nearly 20-fold improvement in the operational lifetime compared to the control device. Our results demonstrate the great potential of further improving the device performance of perovskite QLEDs toward practical applications in lightings and displays via rational device engineering.

Efficient and High-Luminance Perovskite Light-Emitting Diodes Based on CsPbBr3 Nanocrystals Synthesized from a Dual-Purpose Organic Lead Source.

Rational engineering of the surface properties of perovskite nanocrystals (PeNCs) is critical to obtain light emitters with simultaneous high photoluminescence efficiency and excellent charge transport properties for light-emitting diodes (LEDs). However, the commonly used lead halide sources make it hard to rationally optimize the surface compositions of the PeNCs. In addition, previously developed ligand engineering strategies for conventional inorganic nanocrystals easily deteriorate surface properties of the PeNCs, bringing additional difficulties in optimizing their optoelectronic properties. In this work, a novel strategy of employing a dual-purpose organic lead source for the synthesis of highly luminescent PeNCs with enhanced charge transport property is developed. Lead naphthenate (Pb(NA)2 ), of which the metal ions work as lead sources while the naphthenate can function as the surface ligands afterward, is explored and the obtained products under different synthesis conditions are comprehensively investigated. Monodispersed cesium lead bromide (CsPbBr3 ) with controllable size and excellent optical properties, showing superior photoluminescence quantum yields up to 80%, is obtained. Based on the simultaneously enhanced electrical properties of the Pb(NA)2 -derived PeNCs, the resultant LEDs demonstrate a high peak external quantum efficiency of 8.44% and a superior maximum luminance of 31 759 cd cm-2 .

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells.

Longevity has been a long-standing concern for hybrid perovskite photovoltaics. We demonstrate high-resilience positive-intrinsic-negative perovskite solar cells by incorporating a piperidinium-based ionic compound into the formamidinium-cesium lead-trihalide perovskite absorber. With the bandgap tuned to be well suited for perovskite-on-silicon tandem cells, this piperidinium additive enhances the open-circuit voltage and cell efficiency. This additive also retards compositional segregation into impurity phases and pinhole formation in the perovskite absorber layer during aggressive aging. Under full-spectrum simulated sunlight in ambient atmosphere, our unencapsulated and encapsulated cells retain 80 and 95% of their peak and post-burn-in efficiencies for 1010 and 1200 hours at 60° and 85°C, respectively. Our analysis reveals detailed degradation routes that contribute to the failure of aged cells.

Bidirectional optical signal transmission between two identical devices using perovskite diodes.

The integration of optical signal generation and reception into one device - and thus allowing bidirectional optical signal transmission between two identical devices - is of value in the development of miniaturized and integrated optoelectronic devices. However, conventional solution-processable semiconductors have intrinsic material and design limitations that prevent them from being used to create such devices with high performance. Here, we report an efficient solution-processed perovskite diode that is capable of working in both emission and detection modes. The device can be switched between modes by changing the bias direction, and it exhibits light emission with an external quantum efficiency of over 21% and a light detection limit on a sub-picowatt scale. The operation speed for both functions can reach tens of megahertz. Benefiting from the small Stokes shift of perovskites, our diodes exhibit high specific detectivity (more than 2×1012 Jones) at its peak emission (~804 nm), allowing optical signal exchange between two identical diodes. To illustrate the potential of the dual-functional diode, we show that it can be used to create a monolithic pulse sensor and a bidirectional optical communication system.