Biomechanical analysis of stress around the tilted implants with different cantilever lengths in all-on-4 concept.

BACKGROUND: Many clinical studies have reported the high success rate of the All-on-4 concept. In the present study, we aimed to compare the stress distribution with different tilted distal implants and cantilever lengths in an All-on-4 system using the two-dimensional photoelastic method and to establish the All-on-4 implant photoelastic model by computer-aided design (CAD) and rapid prototyping (RP).  METHODS: The data of the human edentulous mandible were acquired by computed tomography (CT). Three human edentulous mandible All-on-4 implant models with different distally inclined implant holes were fabricated using Mimic, Geomagic Studio software, and a light solidifying fast shaping machine. Then the final photoelastic models were established through the traditional method. Each of the three models had four NobelSpeedy Replace implants between the interforaminal regions. The two posterior implants were placed 0, 15, and 45 degrees distally before the mental foramen. The four implants were splinted by wrought cobalt-chromium alloy frameworks. Each of the three photoelastic models was submitted to a 150 N vertical load at five points on the framework: the central fossa of the mandibular first molar, and 0 mm, 5 mm, 10 mm, and 15 mm of the cantilever length. The stress produced in the models was photographed with a digital camera, and the highest value of the stressed fringe pattern was recorded. RESULTS: The All-on-4 implant photoelastic model established by CAD and RP was highly controllable and easy to modify. The position and inclination of implants were accurate, and the frameworks could be passively emplaced. The stress values were higher around a single tilted implant compared with the distal implant in All-on-4 with the same inclination. The 0-degree distal implant and 45-degree distal implant demonstrated the highest and lowest stress when loading at the central fossa of the mandibular first molar, respectively. With the same inclination of distal implant, the peri-implant bone stress increased as the length of cantilever increased. CONCLUSION: The method of establishing the All-on-4 implant photoelastic model by CAD and RP was highly controllable, convenient, fast, and accurate. The tilted implants splinted in the fully fixed prosthesis with reduced cantilever lengths did not increase the stress level compared with the vertical distal implants.And this illustrated that the influence of cantilever on stress distribution was greater than the influence of implant inlination.

Endodontic management of a fused left maxillary second molar and two paramolars using cone beam computed tomography: A case report.

BACKGROUND: Fused teeth usually involve several complications, such as the development of caries in the groove between fused crowns, tooth impaction, diastemas, aesthetic and periodontal problems, and pulpal pathosis, due to the complex anatomical structure of fused teeth. A thorough diagnosis is paramount to forming an accurate treatment plan and obtaining a favourable prognosis. With the advent of cone-beam computed tomography (CBCT), accurate 3-dimensional images of teeth and their surrounding dentoalveolar structures can now be readily obtained, and the technology can accurately provide a minimally invasive approach to acquire detailed diagnostic information. Therefore, we utilize CBCT data herein to generate a digital model for the infected region in a patient, and this model enables us to better plan the management of his case. CASE SUMMARY: This report details the diagnosis and endodontic treatment of a rare case involving a fused maxillary second molar and two paramolars with apical periodontitis. The patient experienced pain upon biting and cold sensitivity in the area of the maxillary left molar. No caries or other defects were identified in these teeth, and a normal response to a pulp electric viability test was observed. With the aid of CBCT and digital model technology, we initially suspected that the infection originated from the isthmus between the maxillary second molar and two paramolars. Therefore, we only treated the isthmus by an endodontic approach and did not destroy the original tooth structure; furthermore, the vital pulp was retained, and good treatment outcomes were observed at the 24-month follow-up. CONCLUSION: This finding may provide new insights and perspectives on the diagnosis and treatment of fused teeth.

The effects of endodontic access cavity design on dentine removal and effectiveness of canal instrumentation in maxillary molars.

AIM: To evaluate in a laboratory setting, the impact of three designs of endodontic access cavities on dentine removal and effectiveness of canal instrumentation in extracted maxillary first molars using micro-computed tomography (micro-CT). METHODOLOGY: A total of 30 extracted intact maxillary first molars were selected and scanned by micro-CT with a voxel size of 24 µm and randomly distributed into three groups: the traditional endodontic cavity (TEC) group, the conservative endodontic cavity (CEC) group and the guided endodontic cavity (GEC) group. The pulp chambers of teeth in the groups were accessed accordingly. After root canal preparation, the teeth were rescanned. The volume of dentine removed after canal preparation, the noninstrumented canal areas, canal transportation and centring ratio were analysed. Data were analysed statistically using one-way analysis of variance. Tukey's post hoc test was used for multiple comparisons. The significance level was set at p < .05. RESULTS: The total volume of dentine removed was significantly greater in the TEC group after root canal preparation (p < .05). No significant differences in the volume of dentine removed occurred between the CEC and GEC groups (p > .05). The volume of dentine removed in the crown, pericervical dentine and coronal third of the canal was significantly lower in CEC and GEC groups when compared to that in the TEC group (p < .05), no difference was observed in the middle third of the canal and apical third of the canal amongst the three groups (p > .05). There was no significant difference in noninstrumented canal area, canal transportation and centring ratio amongst the TEC, CEC and GEC groups (p > .05). CONCLUSIONS: In extracted maxillary molars tested in a laboratory setting, CEC and GEC preserved more tooth tissue in the crown, pericervical dentine and coronal third of the canal compared with TEC after root canal preparation. The design of the endodontic access cavity did not impact on the effectiveness of canal instrumentation in terms of noninstrumented canal area, canal transportation and centring ratio.

Application of robotics in stomatology.

The application of robots in oral treatment can not only reduce the work intensity of clinicians but also improve the accuracy of treatment. In this article, the application and research status of robots in stomatology are reviewed.

The use of platelet-rich fibrin combined with periodontal ligament and jaw bone mesenchymal stem cell sheets for periodontal tissue engineering.

Periodontal regeneration involves the restoration of at least three unique tissues: cementum, periodontal ligament tissue (PDL) and alveolar bone tissue. Here, we first isolated human PDL stem cells (PDLSCs) and jaw bone mesenchymal stem cells (JBMSCs). These cells were then induced to form cell sheets using an ascorbic acid-rich approach, and the cell sheet properties, including morphology, thickness and gene expression profile, were compared. Platelet-rich fibrin (PRF) derived from human venous blood was then fabricated into bioabsorbable fibrin scaffolds containing various growth factors. Finally, the in vivo potential of a cell-material construct based on PDLSC sheets, PRF scaffolds and JBMSC sheets to form periodontal tissue was assessed in a nude mouse model. In this model, PDLSC sheet/PRF/JBMSC sheet composites were placed in a simulated periodontal space comprising human treated dentin matrix (TDM) and hydroxyapatite (HA)/tricalcium phosphate (TCP) frameworks. Eight weeks after implantation, the PDLSC sheets tended to develop into PDL-like tissues, while the JBMSC sheets tended to produce predominantly bone-like tissues. In addition, the PDLSC sheet/PRF/JBMSC sheet composites generated periodontal tissue-like structures containing PDL- and bone-like tissues. Further improvements in this cell transplantation design may have the potential to provide an effective approach for future periodontal tissue regeneration.

New way to achieve frontal facial photographs of the head in its natural position.

Frontal photographs of the head in its natural position are not as easy to achieve as lateral ones. We describe a new way to obtain standard 2-dimensional images of its natural position in full-face frontal view using a customised photographic system, which may provide supplementary information for traditional lateral facial imaging, and be helpful for standard assessment of 3-dimensional facial images.

Development and application of a rapid rehabilitation system for reconstruction of maxillofacial soft-tissue defects related to war and traumatic injuries.

BACKGROUND: The application of a maxillofacial prosthesis is an alternative to surgery in functional-aesthetic facial reconstruction. Computer aided design/computer aided manufacturing has opened up a new approach to the fabrication of maxillofacial prostheses. An intelligentized rapid simulative design and manufacturing system for prostheses was developed to facilitate the prosthesis fabrication procedure. METHODS: The rapid simulation design and rapid fabrication system for maxillofacial prostheses consists of three components: digital impression, intelligentized prosthesis design, and rapid manufacturing. The patients' maxillofacial digital impressions were taken with a structured-light 3D scanner; then, the 3D model of the prostheses and their negative molds could be designed with specific software; lastly, with resin molds fabricated by the rapid prototyping machine, the prostheses could be produced directly and quickly. RESULTS: Fifteen patients with maxillofacial defects received prosthesis rehabilitation provided by the established system. The total clinical time used for each patient was only 4 hours over 2 appointments on average. The contours of the prostheses coordinated properly with the appearance of the patients, and the uniform-thickness border sealed well to adjacent tissues. All of the patients were satisfied with their prostheses. CONCLUSIONS: The rapid simulative rehabilitation system of maxillofacial defects is approaching completion. It could provide an advanced technological solution for the Army in cases of maxillofacial defect rehabilitation.

[Digital surgical technology in reconstruction of orbital frame].

OBJECTIVE: To evaluate the application of digital surgical technology in reconstruction of orbital frame and assess the treatment outcomes. METHODS: Seven patients with post-traumatic orbital defect were included in this study. Images of the orbit were obtained for each individual through computed tomography (CT). Preoperative design was finished according to rapid prototyping, computer-aided design and computer-aided manufacturing (CAD-CAM) and other digital surgical techniques. Surgical fracture reductions with internal fixation and implant of Medpor were used in operation to reconstruct orbit as well as correct enophthalmos and diplopia. RESULTS: Accurate realignment of the displaced orbital rim was obtained in all the 7 patients, and enophthalmos and diplopia were corrected in 4 and 2 patients, respectively. CONCLUSIONS: Digital techniques provide a precise means for preoperative design and operation implementation during orbital reconstruction. As a result, complications can be reduced, and the patient's facial appearance can be maximally improved.

Virtual transplantation in designing a facial prosthesis for extensive maxillofacial defects that cross the facial midline using computer-assisted technology.

PURPOSE: The aim of this article was to demonstrate a novel approach to designing facial prostheses using the transplantation concept and computer-assisted technology for extensive, large, maxillofacial defects that cross the facial midline. MATERIALS AND METHODS: The three-dimensional (3D) facial surface images of a patient and his relative were reconstructed using data obtained through optical scanning. Based on these images, the corresponding portion of the relative's face was transplanted to the patient's where the defect was located, which could not be rehabilitated using mirror projection, to design the virtual facial prosthesis without the eye. A 3D model of an artificial eye that mimicked the patient's remaining one was developed, transplanted, and fit onto the virtual prosthesis. A personalized retention structure for the artificial eye was designed on the virtual facial prosthesis. The wax prosthesis was manufactured through rapid prototyping, and the definitive silicone prosthesis was completed. RESULTS: The size, shape, and cosmetic appearance of the prosthesis were satisfactory and matched the defect area well. The patient's facial appearance was recovered perfectly with the prosthesis, as determined through clinical evaluation. CONCLUSION: The optical 3D imaging and computer-aided design/computer-assisted manufacturing system used in this study can design and fabricate facial prostheses more precisely than conventional manual sculpturing techniques. The discomfort generally associated with such conventional methods was decreased greatly. The virtual transplantation used to design the facial prosthesis for the maxillofacial defect, which crossed the facial midline, and the development of the retention structure for the eye were both feasible.

[Construction of three-dimensional finite element model of human edentulous maxilla and cranial skeleton].

OBJECTIVE: To develop an effective and feasible method to construct three-dimensional finite element model of the whole edentulous maxilla and cranial skeleton. METHODS: Based on three-dimensional computer aided design model which was constructed by multi-slices helical CT scanning data of a male's head in specialized software, three-dimensional finite element model of edentulous maxillary and cranial skeleton was established; the stresses distribution in maxilla was investigated under occlusal load with computer simulated a complete overdenture. RESULTS: The three-dimensional finite element model of edentulous maxilla and cranial skeleton had favorite similarity in geometry, the distributions of stresses in maxilla and the wall of maxillary sinus could be clearly observed. CONCLUSIONS: The study verifies that this three-dimensional finite element modeling method is feasible and effective.