Updated Chronic Copper Bioavailability Models for Invertebrates and Algae.

Chronic copper (Cu) bioavailability models have been successfully implemented in European risk assessment frameworks and compliance evaluations. However, they were developed almost two decades ago, which calls for an update. In the study, we present updated chronic Cu bioavailability models for invertebrates and algae. They consider recent ecotoxicity data sets and use the more recent speciation model Windermere Humic Aqueous Model (WHAM) VII and an optimized model structure (i.e., a generalized bioavailability model [gBAM]). Contrary to the classic biotic ligand model, a gBAM models the effect of pH on Cu2+ toxicity via a log-linear relationship parametrized through the pH slope SpH . The recalibrated SpH parameters are -0.208 for invertebrates (Daphnia magna, two clones) and -0.975 for algae (Raphidocelis subcapitata and Chlorella vulgaris). The updated models predict 80% to 100% of the observed effect levels for eight different species within a factor of 2. The only exception was one of the two data sets considering subchronic 7-day mortality to Hyalella azteca: the prediction performance of the updated invertebrate model at pH ≥ 8.3 was poor because the effect of pH on Cu2+ toxicity appeared to be dependent on the pH itself (with a steeper pH slope compared with the updated invertebrate model at pH ≥ 8.1). The prediction performance of the updated Cu bioavailability models was similar to or better than that of the models used for regulatory application in Europe until now, with one exception (i.e., H. azteca). Together with the recently published fish bioavailability model, the models developed in the present study constitute a complete, updated, and consistent bioavailability model set. Overall, the updated chronic Cu bioavailability model set is robust and can be used in regulatory applications. The updated bioavailability model set is currently used under the European Union Registration, Evaluation, Authorisation, and Restriction of Chemicals framework regulation to guide the safe use of Cu. Environ Toxicol Chem 2024;43:450-467. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Challenges and Recommendations in Assessing Potential Endocrine-Disrupting Properties of Metals in Aquatic Organisms.

New tools and refined frameworks for identifying and regulating endocrine-disrupting chemicals (EDCs) are being developed as our scientific understanding of how they work advances. Although focus has largely been on organic chemicals, the potential for metals to act as EDCs in aquatic systems is receiving increasing attention. Metal interactions with the endocrine system are complicated because some metals are essential to physiological systems, including the endocrine system, and nonessential metals can have similar physiochemical attributes that allow substitution into or interference with these systems. Consequently, elevated metal exposure could potentially cause endocrine disruption (ED) but can also cause indirect effects on the endocrine system via multiple pathways or elicit physiologically appropriate compensatory endocrine-mediated responses (endocrine modulation). These latter two effects can be confused with, but are clearly not, ED. In the present study, we provide several case studies that exemplify the challenges encountered in evaluating the endocrine-disrupting (ED) potential of metals, followed by recommendations on how to meet them. Given that metals have multiple modes of action (MOAs), we recommend that assessments use metal-specific adverse outcome pathway networks to ensure that accurate causal links are made between MOAs and effects on the endocrine system. We recommend more focus on establishing molecular initiating events for chronic metal toxicity because these are poorly understood and would reduce uncertainty regarding the potential for metals to be EDCs. Finally, more generalized MOAs such as oxidative stress could be involved in metal interactions with the endocrine system, and we suggest it may be experimentally efficient to evaluate these MOAs when ED is inferred. These experiments, however, must provide explicit linkage to the ED endpoints of interest. Environ Toxicol Chem 2023;42:2564-2579. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Following the evidence and using the appropriate regulatory tools: A European-wide risk assessment of copper in freshwaters.

The ecological risks of copper (Cu) in freshwaters have been the focus of regulatory assessments for several decades. Recently, it has been suggested by the European Commission that Cu represents a continent-wide risk to freshwaters. We assessed to what extent this suggestion is supported by the available evidence if Cu bioavailability is considered in the assessment of risk. We used several evidence-driven metrics to assess the continental-wide risks of Cu to European freshwaters. Such an approach is recommended and readily applicable where comprehensive data sets are available. We confirmed the validity of a bioavailability-based Environmental Quality Standard of 1 µg L-1 for Cu and used this to characterize the risks of Cu in 286 185 regulatory monitoring samples from 17 307 sites across 19 European countries between 2006 and 2021. These data show that risks, based on site averages and accounting for bioavailability, were identified in only two countries (Spain and Portugal). Investigation of these risks showed them to be highly localized to a single region in Spain and not reflective of the country-wide risks for either country. The 95th percentile of all the risk quotients for the continent-wide data set is 0.35. The relatively low levels of risk associated with Cu are supported by long-term trend data from sites on two large European rivers (Rhine and Meuse), where highly significant (p < 0.001) decreases in Cu concentrations over the last 40 years can be observed. We conclude that it is critical to consider metal bioavailability in both effects and exposures in assessments of potential risk to ensure ecological relevance. Integr Environ Assess Manag 2023;19:1570-1580. © 2023 WCA Environment Ltd. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Influence of systemic copper toxicity on early development and metamorphosis in Xenopus laevis.

The primary objective of the present study was to examine the influence of early systemic toxicity resulting from copper (Cu) exposure on metamorphic processes in Xenopus laevis. A 28-day exposure study with copper, initiated at developmental stage 10, was performed using test concentrations of 3.0, 9.0, 27.2, 82.5, and 250 µg Cu/L. The primary endpoints included mortality, developmental stage, embryo-larval malformation, behavioral effects, hindlimb length (HLL), growth (snout-vent length [SVL] and wet body weight), and histopathology. The 28-day LC50 value with 95% confidence intervals was 61.2 (51.4-72.9) µg Cu/L with 250 µg Cu/L resulting in complete lethality. Developmental arrest in the 82.5 and delay in the 27.2 µg Cu/L treatments was observed as early as study day 10 continuing throughout the remainder of exposure. SVL-normalized HLL, body weight, and SVL in the 27.2 and 82.5 µg Cu/L treatments were significantly decreased relative to control. At 82.5 µg Cu/L, and thyroid gland size was markedly reduced when compared with controls consistent with the stage of developmental and growth arrest. Concentration-dependent findings in the intestine, liver, gills, eyes, and pharyngeal mucosa were consistent with non-endocrine systemic toxicity. These were prevalent in the 9.0 and 27.2 µg Cu/L treatment groups but were minimally evident or absent in the 82.5 µg/L group, which was attributed to developmental arrest. In conclusion, developmental delay in larvae exposed to 27.2 and 82.5 µg Cu/L was the result of systemic toxicity occurring in early development prior hypothalomo-pituitary-thyroid axis (HPT)-driven metamorphosis and was not indicative of endocrine disruption.

Evaluation of effects-based methods as monitoring tools for assessing ecological impacts of metals in aquatic ecosystems.

Effects-based methods (EBMs) are considered part of a more integrative strategy for regulating substances of concern under the European Union Water Framework Directive. In general, EBMs have been demonstrated as useful indicators of effects on biota, although links to population and community-level effects are sometimes uncertain. When EBMs are sufficiently specific and sensitive, and links between measured endpoints and apical or higher level effects are established, they can be a useful tool in assessing effects from a specific toxicant or class of toxicants. This is particularly valuable for toxicants that are difficult to measure and for assessing the effects of toxicant mixtures. This paper evaluates 12 EBMs that have been proposed for potential use in the assessment of metals. Each EBM was evaluated with respect to metal specificity and sensitivity, sensitivity to other classes of toxicants, and the strength of the relationship between EBM endpoints and effects observed at the whole organism or population levels of biological organization. The evaluation concluded that none of the EBMs evaluated meet all three criteria of being sensitive to metals, insensitive to other classes of toxicants, and a strong indicator of effects at the whole organism or population level. Given the lack of suitable EBMs for metals, we recommended that the continued development of mixture biotic ligand models (mBLMs) may be the most effective way to achieve the goal of a more holistic approach to regulating metals in aquatic ecosystems. Given the need to further develop and validate mBLMs, we suggest an interim weight-of-evidence approach that includes mBLMs, macroinvertebrate community bioassessment, and measurement of metals in key macroinvertebrate species. This approach provides a near-term solution and simultaneously generates data needed for the refinement and validation of mBLMs. Once validated, it should be possible to rely primarily on mBLMs as an alternative to EBMs for metals. Integr Environ Assess Manag 2023;19:24-31.  © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Sources of copper into the European aquatic environment.

Chemical contamination from point source discharges in developed (resource-rich) countries has been widely regulated and studied for decades; however, diffuse sources are largely unregulated and widespread. In the European Union (EU), large dischargers report releases of some chemicals, yet little is known of total emissions (point and diffuse) and their relative significance. We estimated copper loadings from all significant sources including industry, sewage treatment plants, surface runoff (from traffic, architecture, and atmospheric deposition), septic tanks, agriculture, mariculture, marine transport (antifoulant leaching), and natural processes. A combination of European datasets, literature, and industry data were used to generate export coefficients. These were then multiplied by activity rates to derive loads. A total of approximately 8 kt of copper per annum (ktpa) is estimated to enter freshwaters in the EU, and another 3.5 ktpa enters transitional and coastal waters. The main inputs to freshwater are natural processes (3.7 ktpa), agriculture (1.8 ktpa), and runoff (1.8 ktpa). Agricultural emissions are dominated by copper-based plant protection products and farmyard manure. Urban runoff is influenced by copper use in architecture and by vehicle brake linings. Antifoulant leaching from boats (3.2 ktpa) dominates saline water loads of copper. It is noteworthy that most of the emissions originate in a limited number of copper uses where environmental exposure and pathways exist, compared with the bulk of copper use within electrical and electronic equipment and infrastructure that has no environmental pathway during its use. A sensitivity analysis indicated significant uncertainty in data from abandoned mines and urban runoff load estimates. This study provided for the first time a methodology and comprehensive metal load apportionment to European aquatic systems, identifying data gaps and uncertainties, which may be refined over time. Source apportionments using this methodology can inform more cost-effective environmental risk assessment and management. Integr Environ Assess Manag 2023;19:1031-1047. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Adverse Outcome Pathways for Chronic Copper Toxicity to Fish and Amphibians.

In the present review, we synthesize information on the mechanisms of chronic copper (Cu) toxicity using an adverse outcome pathway framework and identify three primary pathways for chronic Cu toxicity: disruption of sodium homeostasis, effects on bioenergetics, and oxidative stress. Unlike acute Cu toxicity, disruption of sodium homeostasis is not a driving mechanism of chronic toxicity, but compensatory responses in this pathway contribute to effects on organism bioenergetics. Effects on bioenergetics clearly contribute to chronic Cu toxicity with impacts at multiple lower levels of biological organization. However, quantitatively translating these impacts into effects on apical endpoints such as growth, amphibian metamorphosis, and reproduction remains elusive and requires further study. Copper-induced oxidative stress occurs in most tissues of aquatic vertebrates and is clearly a significant driver of chronic Cu toxicity. Although antioxidant responses and capacities differ among tissues, there is no clear indication that specific tissues are more sensitive than others to oxidative stress. Oxidative stress leads to increased apoptosis and cellular damage in multiple tissues, including some that contribute to bioenergetic effects. This also includes oxidative damage to tissues involved in neuroendocrine axes and this damage likely alters the normal function of these tissues. Importantly, Cu-induced changes in hormone concentrations and gene expression in endocrine-mediated pathways such as reproductive steroidogenesis and amphibian metamorphosis are likely the result of oxidative stress-induced tissue damage and not endocrine disruption. Overall, we conclude that oxidative stress is likely the primary driver of chronic Cu toxicity in aquatic vertebrates, with bioenergetic effects and compensatory response to disruption of sodium homeostasis contributing to some degree to observed effects on apical endpoints. Environ Toxicol Chem 2022;41:2911-2927. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Demonstrating the Reliability of bio-met for Determining Compliance with Environmental Quality Standards for Metals in Europe.

The importance of considering the bioavailability of metals in understanding and assessing their toxicity in freshwaters has been recognized for many years. Currently, biotic ligand models (BLMs) are being applied for the derivation and implementation of environmental quality standards (EQS) for metals under the Water Framework Directive in Europe. bio-met is a simplified tool that was developed for implementing bioavailability-based EQS for metals in European freshwaters. We demonstrate the reliability of the relationship between the full BLM predictions and the thresholds (hazardous concentration affecting 5% of species [HC5] values) predicted by bio-met in 3 stages, for the metals copper, nickel, and zinc. First, ecotoxicity data for specific species from laboratory tests in natural waters are compared with predictions by the individual species BLMs included in the full BLMs. Second, the site-specific HC5 values predicted by bio-met for the natural waters used for ecotoxicity testing are compared with those provided by the full BLMs. The reliability of both relationships is demonstrated for all 3 metals, with more than 80% of individual species BLM predictions being within a factor of 3 of the experimental results, and 99% of bio-met local HC5 predictions being within a factor of 2 of the full BLM result. Third, using a larger set of European natural waters in addition demonstrates the reliability of bio-met over a broad range of water chemistry conditions. bio-met is therefore an appropriate tool for performing compliance assessments against EQS values in Europe, due to the demonstrated consistency with the toxicity test data. Environ Toxicol Chem 2020;39:2361-2377. © 2020 SETAC.

Copper alloys' metal migration and bioaccessibility in saliva and gastric fluid.

The oral bioaccessibility of copper alloys and pure metals was assessed using in vitro methods with synthetic saliva and gastric fluid. The metal-specific migration rates from polished alloy surfaces are higher in gastric (pH 1.5) than in saliva fluid (pH 7.2). In both media, migrations are higher for lead than for other metals. The bioaccessible metal concentrations in massive copper alloys, after 2 h in gastric fluid, was only <0.01%-0.18%, consistent with the low surface reactivity of copper alloys (defined as 1 mm spheres). The average metal-specific migrations of cobalt, copper, nickel and lead from most of the tested copper alloys in gastric media are comparable to the ones from their pure metals. The data further show that the bioaccessibility of metals in massive copper alloys primarily depends on the bioelution medium, the exposed surface area and the composition of the alloy. The tested copper alloys show only limited evidence for influence of alloy surface microstructure. This is contrary to findings for other alloys such as stainless steel. Additional investigations on other copper alloys could allow to further refine these conclusions. These findings are useful for establishing the hazard and risk profile of copper alloys following oral exposure.

Weight-of-Evidence Approach for Assessing Removal of Metals from the Water Column for Chronic Environmental Hazard Classification.

The United Nations and the European Union have developed guidelines for the assessment of long-term (chronic) chemical environmental hazards. This approach recognizes that these hazards are often related to spillage of chemicals into freshwater environments. The goal of the present study was to examine the concept of metal ion removal from the water column in the context of hazard assessment and classification. We propose a weight-of-evidence approach that assesses several aspects of metals including the intrinsic properties of metals, the rate at which metals bind to particles in the water column and settle, the transformation of metals to nonavailable and nontoxic forms, and the potential for remobilization of metals from sediment. We developed a test method to quantify metal removal in aqueous systems: the extended transformation/dissolution protocol (T/DP-E). The method is based on that of the Organisation for Economic Co-operation and Development (OECD). The key element of the protocol extension is the addition of substrate particles (as found in nature), allowing the removal processes to occur. The present study focused on extending this test to support the assessment of metal removal from aqueous systems, equivalent to the concept of "degradability" for organic chemicals. Although the technical aspects of our proposed method are different from the OECD method for organics, its use for hazard classification is equivalent. Models were developed providing mechanistic insight into processes occurring during the T/DP-E method. Some metals, such as copper, rapidly decreased (within 96 h) under the 70% threshold criterion, whereas others, such as strontium, did not. A variety of method variables were evaluated and optimized to allow for a reproducible, realistic hazard classification method that mimics reasonable worst-case scenarios. We propose that this method be standardized for OECD hazard classification via round robin (ring) testing to ascertain its intra- and interlaboratory variability. Environ Toxicol Chem 2019;38:1839-1849. © 2019 SETAC.

Method Development for Determining the Removal of Metals from the Water Column under Transformation/Dissolution Conditions for Chronic Hazard Classification.

An extension of the transformation/dissolution protocol (T/DP) was developed and evaluated as a tool to measure the removal of metals from the water column for chronic aquatic hazard classification. The T/DP extension (T/DP-E) consists of 2 parts: T/DP-E part 1, to measure metal removal from the water column via binding of metals to a substrate and subsequent settling, and T/DP-E part 2, to assess the potential for remobilization of metals following resuspension. The T/DP-E methodology (672-h [28-d] removal period, 1-h resuspension event, and 96-h resettling period) was tested using Cu, Co, and Sr solutions in the presence of a substrate. The metal removal rates varied from rapid removal for Cu to slower rates of removal for Co and Sr. The resuspension event did not trigger any increase in dissolved Cu, Co, or Sr. Additional 96-h experiments were conducted using dissolved Ni, Pb, Zn, and Ag and supported the conclusion that the T/DP-E is sufficiently robust to distinguish removal rates between metals with a wide range of reactivities. The proposed method provides a means to quantify the rate of metal removal from the water column and evaluate remobilization potential in a standardized and reliable way. Environ Toxicol Chem 2019;38:2032-2042. © 2019 SETAC.

The Fate of Copper Added to Surface Water: Field, Laboratory, and Modeling Studies.

The fate and effects of copper in the environment are governed by a complex set of environmental processes that include binding to inorganic and organic ligands in water, soil, and sediments. In natural waters, these interactions can limit copper bioavailability and result in copper transport from the water column to the sediment. In the present study, data on the fate of copper added to lakes, microcosms, and mesocosms were compiled and analyzed to determine copper removal rates from the water column. Studies on copper behavior in sediment were also reviewed to assess the potential for remobilization. A previously developed, screening-level fate and transport model (tableau input coupled kinetic equilibrium transport-unit world model [TICKET-UWM]) was parameterized and applied to quantify copper removal rates and remobilization in a standardized lake setting. Field and modeling results were reconciled within a framework that links copper removal rates to lake depths and solids fluxes. The results of these analyses provide converging evidence that, on a large scale, copper is removed relatively quickly from natural waters. For the majority of studies examined, more than 70% of the added copper was removed from the water column within 16 d of dosing. This information may be useful in the context of environmental hazard and risk assessment of copper. Environ Toxicol Chem 2019;38:1386-1399. © 2019 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

Modeling the Fate of Metal Concentrates in Surface Water.

Metals present in concentrates are in a solid form and are not bioavailable, but they can dissolve or potentially transform to more soluble forms. Transformation/dissolution laboratory protocols have been developed to assess the importance of dissolution of sparingly soluble metal substances in the context of hazard classification; however, these tests represent worst-case scenarios for metal bioavailability because attenuation mechanisms such as complexation, sorption, and transport to the sediment are not considered. A unit world model (UWM) for metals in lakes, tableau input coupled kinetics equilibrium transport (TICKET)-UWM, has been developed that considers key processes affecting metal transport, fate, and toxicity including complexation by aqueous inorganic and ligands, partitioning to dissolved organic carbon (DOC) and particulate organic carbon (POC), precipitation, and transport of dissolved metals and solids between the water column and sediment. The TICKET-UWM model was used to assess the fate of a metal concentrate and dissolved metal ions released from the concentrate following an instantaneous input to a generalized lake. Concentrate dissolution rates in the water column were parameterized using results from batch transformation/dissolution tests for 2 specific concentrates containing lead (Pb), copper (Cu), and cobalt (Co). The TICKET-UWM results for a generalized lake environment showed that water column concentrations of metals in the lake environment after 28 d were several orders of magnitude lower than the 28-d concentration from the transformation/dissolution tests because Pb, Cu, and Co partitioned to POC in the water column and were subsequently removed due to settling. Resuspension of sediment served to increase total metal in the water column, but the resulting concentrations were still much lower than the 28-d concentrations from the transformation/dissolution tests. Information from TICKET-UWM could be used to refine the environmental hazard profiles of metals. Environ Toxicol Chem 2019;38:1256-1272. © 2019 SETAC.

The Use of Mechanistic Population Models in Metal Risk Assessment: Combined Effects of Copper and Food Source on Lymnaea stagnalis Populations.

Environmental risk assessment (ERA) of chemicals aims to protect populations, communities, and ecosystems. Population models are considered more frequent in ERA because they can bridge the gap between the individual and the population level. Lymnaea stagnalis (the great pond snail) is an organism that is particularly sensitive to various metals, including copper (Cu). In addition, the sensitivity of this species to Cu differs between food sources. The first goal of the present study was to investigate whether we could explain the variability in sensitivity between food sources (lettuce and fish flakes) at the individual level with a dynamic energy budget (DEB) model. By adapting an existing DEB model and calibrating it with Cu toxicity data, thereby combining information from 3 studies and 2 endpoints (growth and reproduction), we put forward inhibition of energy assimilation as the most plausible physiological mode of action (PMoA) of Cu. Furthermore, the variation in Cu sensitivity between both food sources was considerably lower at the PMoA level than at the individual level. Higher Cu sensitivity at individual level under conditions of lower food quality or availability appears to emerge from first DEB principles when inhibition of assimilation is the PMoA. This supports the idea that DEB explained Cu sensitivity variation between food sources. Our second goal was to investigate whether this food source effect propagated to the population level. By incorporating DEB in an individual-based model (IBM), population-level effects were predicted. Based on our simulations, the food source effect was still present at the population level, albeit less prominently. Finally, we compared predicted population-level effect concentration, x% (ECx) values with individual-level ECx values for different studies. Using the DEB-IBM, the range of effect concentrations decreased significantly: at the individual level, the difference in chronic EC10 values between studies was a factor of 70 (1.13-78 µg dissolved Cu/L), whereas at the population level the difference was a factor of 15 (2.9-44.6 µg dissolved Cu/L). To improve interstudy comparability, a bioavailability correction for differences in water chemistry was performed with a biotic ligand model. This further decreased the variation, down to a factor of 7.4. Applying the population model in combination with a bioavailability correction thus significantly decreased the variability of chronic effect concentrations of Cu for L. stagnalis. Overall, the results of the present study illustrate the potential usefulness of transitioning to a more modeling-based environmental risk assessment. Environ Toxicol Chem 2019;00:1-16. © 2019 SETAC.

An analysis of potential bias in the sensitivity of toxicity data used to construct sensitivity distributions for copper.

Since the mid-1970s, thousands of studies have evaluated the toxicity of various chemicals to aquatic organisms. Results from many of these studies have been used to develop species sensitivity distributions (SSDs) or genus sensitivity distributions (GSDs) for deriving water quality guidelines. Recently, there has been more emphasis on evaluating the toxicity of chemicals to sensitive organisms rather than the entire range of sensitivities. The SSD approach is intended to inform the derivation of guidelines for the protection of all species, not just those that were included in the SSD. The overemphasis of the more sensitive end of the SSD can contribute to a skew in the observed distribution such that the shape of the distribution is distorted from what it would be if all species could be tested, which ultimately affects the derived guideline value. The freshwater acute Cu GSD derived by the US Environmental Protection Agency (USEPA) is one that exemplifies this trend, with one-third of the genera in the GSD belonging to only 3 taxonomic families, all of which are nearer to the sensitive end of the distribution. The stronger representation of the more sensitive families does not seem to mirror the overall abundance of species within those families in nature. This tendency toward testing sensitive organisms is not seen in the chronic Cu SSD. In the present study, Cu toxicity literature is reviewed and long-term trends in the availability of toxicity information for species of varying sensitivity are examined. As part of the present review, the apparent bias that favors the publication of toxicity data for sensitive taxa is demonstrated, and implications for the representativeness of SSDs and their use in developing water quality guidelines are discussed. Integr Environ Assess Manag 2019;00:000-000. © 2019 SETAC.

Assessing Compliance of European Fresh Waters for Copper: Accounting for Bioavailability.

This study determines the levels of compliance of European fresh waters with a bioavailability-based copper Environmental Quality Standard (EQS). A tiered approach for compliance assessment is used at which the first tier compares the dissolved metal concentration to a threshold, estimated using either regional or continental water chemistry data. At the second tier, the bioavailable metal concentration is calculated using the chemistry of the water body, and compared to the EQSbioavailable for copper. The thresholds at Tier 1 must be set at a level to ensure adequate protection of sensitive environments and to ensure efficient use of regulatory resources. Compliance of 99.3% is observed where bioavailability-based thresholds are used for the implementation derived from regionally relevant water chemistry data. Sites where elevated ambient background levels of copper are combined with high bioavailability (waters with low dissolved organic carbon) are those most likely to be at risk from copper exposures.

Internal Loading and Redox Cycling of Sediment Iron Explain Reactive Phosphorus Concentrations in Lowland Rivers.

The phosphate quality standards in the lowland rivers of Flanders (northern Belgium) are exceeded in over 80% of the sampling sites. The factors affecting the molybdate reactive P (MRP) in these waters were analyzed using the data of the past decade (>200 000 observations). The average MRP concentration in summer exceeds that winter by factor 3. This seasonal trend is opposite to that of the dissolved oxygen (DO) and nitrate concentrations. The negative correlations between MRP and DO is marked (r = -0.89). The MRP concentrations are geographically unrelated to erosion sensitive areas, to point-source P-emissions or to riverbed sediment P concentration. Instead, MRP concentrations significantly increase with increasing sediment P/Fe concentration ratio (p < 0.01). Laboratory static sediment-water incubations with different DO and temperature treatments confirmed suspected mechanisms: at low DO in water (<4 mg L-1), reductive dissolution of ferric Fe oxides was associated with mobilization of P to the water column from sediments with a molar P/Fe ratio >0.4. In contrast, no such release was found from sediments with lower P/Fe irrespective of temperature and DO treatments. This study suggests that internal loading of the legacy P in the sediments explains the MRP concentrations which are most pronounced at low DO concentrations and in regions where the P/Fe ratio in sediment is large.

Polyphosphates and Fulvates Enhance Environmental Stability of PO4-Bearing Colloidal Iron Oxyhydroxides.

Iron oxyhydroxide nanoparticles (Fe-NPs) are natural vectors of phosphate (PO4) in the environment. Their mobility is determined by colloidal stability, which is affected by surface composition. This might be manipulated in engineered NPs for environmental or agricultural applications. Here, the stability of PO4-Fe-NPs (HFO/goethite) was determined across contrasting environmental conditions (pH, Ca concentration) and by using fulvates (FA) and polyphosphates (poly-P's) as coatings. The PO4-Fe-NPs are unstable at Ca concentrations above 0.1 mM. Addition of FA and some poly-P's significantly improved stability. Zeta potential explained colloidal stability across treatments; surface charge was calculated with surface complexation models and explained for phytic acid (PA) and hexametaphosphate (HMP) by a partial (1-4 of the 6 PO4 units) adsorption to the surface, while the remaining PO4 units stayed in solution. This study suggests that Ca concentration mainly affects the mobility of natural or engineered PO4-Fe-NPs and that HMP is a promising agent for increasing colloidal stability.