The Accuracy of Digital Impressions versus Conventional Impressions in Neonates with Cleft Lip and/or Palate: A Laboratory-Based Study.

Cleft lip and palate (CL/P) are a common congenital craniofacial anomaly requiring precise impressions for effective treatment. Conventional impressions (CIs) pose challenges in neonates with CL/P due to their delicate oral anatomy. While digital impressions (DIs) are increasingly recognised for their potential benefits over conventional methods in dentistry, their accuracy and application in neonates with cleft lip and palate (CL/P) remain underexplored. This study aimed to assess the accuracy of DIs compared to CIs in neonates with CL/P, using alginate and putty materials as references. A laboratory-based case-control study was conducted, utilising soft acrylic models resembling neonatal mouths with CL/P. Alginate and putty impressions were obtained conventionally, while digital impressions were captured using an intraoral scanner (IOS). A total of 42 models were analysed, divided evenly into three groups, with each group comprising 14 models. Superimposition and surface discrepancy analyses were performed to evaluate impression accuracy. The results revealed no statistically significant differences between the digital and conventional impressions in their intra-arch measurements and surface discrepancies. The mean measurement values did not significantly differ among groups, with p values indicating no significant variations (p > 0.05), confirmed by an analysis of variance. High intra-examiner reliability with Intra Class Coefficient (ICC) values close to 1 indicated consistent measurements over time. The current study demonstrates that DIs are equally accurate as conventional alginate and putty impressions in neonates with cleft lip and palate, offering a viable and less invasive alternative for clinical practise. This advancement holds promise for improving the treatment planning process and enhancing patient comfort, particularly in vulnerable neonatal populations. Further research is warranted to explore the clinical implications and factors affecting DI accuracy in this population.

Considerations for oral and dental tissues in holistic care during long-haul space flights.

The health of astronauts during and after the return from long-haul space missions is paramount. There is plethora of research in the literature about the medical side of astronauts' health, however, the dental and oral health of the space crew seem to be overlooked with limited information in the literature about the effects of the space environment and microgravity on the oral and dental tissues. In this article, we shed some light on the latest available research related to space dentistry and provide some hypotheses that could guide the directions of future research and help maintain the oral health of space crews. We also promote for the importance of regenerative medicine and dentistry as well highlight the opportunities available in the expanding field of bioprinting/biomanufacturing through utilizing the effects of microgravity on stem cells culture techniques. Finally, we provide recommendations for adopting a multidisciplinary approach for oral healthcare during long-haul space flights.

Balancing Risks versus Benefits: Vitamin C Therapy versus Copper Oxide Nanoparticles Toxicity in Albino Rats' Submandibular Salivary Gland.

OBJECTIVES: This study aimed to examine the suppressive effect of the natural antioxidant vitamin C (VC) against submandibular gland toxicity induced by copper oxide nanoparticles (CuO-NPs). MATERIALS AND METHODS: Three groups of 30 mature male albino rats (4 weeks old) weighing between 150 and 200 g were selected. The rats were randomly assigned for 6 weeks to receive: intraperitoneal injection (IP) of vehicle (control group); IP of 2.5 mg/kg body weight (bw) of CuO-NPs (CuO-NPs group); and IP of 2.5 mg/kg bw of CuO-NPs, combined with a daily oral dose of 100 mg/kg bw of VC in drinking water via gavage (CuO-NPs/VC group). The rats were euthanized, and their submandibular glands were dissected for histological evaluation, including hematoxylin and eosin staining and immunohistochemistry for Ki-67 and caspase-3. STATISTICAL ANALYSIS: The area expression for Ki-67 and caspase-3 was statistically analyzed using GraphPad Prism. Following analysis of variance analysis, Tukey's post hoc was used for multiple comparisons. The significance level was set at p < 0.05. RESULTS: CuO-NPs caused significant cytotoxic effects on submandibular salivary gland cells in albino rats. This led to an increase in Ki-67 and caspase-3 levels compared with the control group. VC administration improved tissue histology and reduced Ki-67 and caspase-3 levels in the VC/CuO-NPs group compared with rats treated with CuO-NPs alone. CONCLUSION: The study revealed significant cytotoxic effects of CuO-NPs on the submandibular salivary gland of albino rats. VC effectively mitigated these toxic effects, suggesting its potential as a readily available antioxidant.

Effect of Acidic Media on Surface Topography and Color Stability of Two Different Glass Ceramics.

OBJECTIVE: The aim of this study was to determine the effect of two acidic beverages (orange juice and H3PO4-containing fizzy drink) on the surface topography and color stability of two commonly used computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials. MATERIALS AND METHODS: Sixty samples of two CAD/CAM ceramic materials, lithium disilicate (IPS e-max CAD) and zirconia reinforced lithium silicate (Vita Suprinity), were prepared according to the manufacturer's instructions. The samples were immersed in one of three media (artificial saliva, orange juice and H3PO4-containing fizzy drink) and then stored in an incubator at 37 °C for 24 hours). Before and after immersion in different media, the surface roughness (Ra) of the samples was assessed using profilometer (JITAI8101 Surface Roughness Tester-Beijing Jitai Tech Detection Device Co. Ltd, China) and the color parameters were measured using VITA Easyshade Advance 4.01 (VITA shade, VITA made, VITA). Surface topography was observed using scanning electron microscope (SEM) and surface mineral content was compared before and after immersion. Paired sample t-test was used to determine the change in Ra before and after immersion. Two-way analysis of variance was used to determine the effect of different CAD/CAM materials and immersion media on the mean ∆Ra and mean ∆E of the studied groups. Tukey's honest significant difference posthoc test was used for multiple comparisons at a level of significance (α = 0.05). RESULTS: A significant increase in Ra and a decrease in the color stability of the two investigated ceramic materials were detected after immersion in the acidic media than in artificial saliva. SEM and energy-dispersive X-ray results revealed the dissolution of the glassy matrix and the exposure of silicate crystals. CONCLUSION: The surface topography and color stability of glass ceramics are affected by the pH of different acidic media.

Effect of Two Different Intraoral Polishing Systems on Surface Roughness, Color Stability, and Bacterial Accumulation of Zirconia-Reinforced Lithium Silicate Ceramic.

OBJECTIVE: The aim of this study was to investigate the effects of two intraoral polishing methods on zirconia-reinforced lithium silicate ceramic after ultrasonic scaling. MATERIALS AND METHODS: Thirty disc-shaped samples of zirconia-reinforced lithium silicate were constructed. Freshly extracted bovine teeth were collected and cleaned then the discs were cemented into a cavity prepared onto their labial surface. The samples were divided into three groups (10 samples per group); S: Scaling only, SE: Scaling followed by polishing using Eve Diapro lithium disilicate polishers, SD: Scaling followed by polishing using Diatech ShapeGuard ceramic polishing plus kit. The surface roughness was evaluated after scaling and polishing the samples. For color stability, the samples were stored for 12 days at 37°C in an incubator to simulate 1-year consumption of coffee. L*a*b* color parameters were assessed using VITA Easyshade Advance 4.0 before and after the staining procedure and the color difference was measured. Finally, bacterial accumulation was evaluated by incubating the samples with a suspension of Streptococcus mutans ( S. mutans), after that the S. mutans colonies were counted to obtain the values of colony-forming units (CFU). The final overall roughness, change in color and bacterial count were compared between all groups using one-way ANOVA and Tukey's post-hoc analysis. The Pearson correlation coefficient was used to determine the correlation between continuous variables. The cutoff for significance was chosen at p ≤ 0.05. RESULTS: Scaling induced surface roughness of the zirconia-reinforced lithium silicate ceramic was significantly decreased after using both intraoral polishing systems and this was accompanied by a significant decrease in color change and bacterial count. CONCLUSION: Intraoral polishing techniques can reduce the roughness of the surface of zirconia reinforced lithium silicate restorations induced due to scaling and subsequently reduce the stainability and bacterial accumulation.

Cellulose de-polymerization is selective for bioethanol refinery and multi-functional biochar assembly using brittle stalk of corn mutant.

As lignocellulose recalcitrance principally restricts for a cost-effective conversion into biofuels and bioproducts, this study re-selected the brittle stalk of corn mutant by MuDR-transposon insertion, and detected much reduced cellulose polymerization and crystallinity. Using recyclable CaO chemical for biomass pretreatment, we determined a consistently enhanced enzymatic saccharification of pretreated corn brittle stalk for higher-yield bioethanol conversion. Furthermore, the enzyme-undigestible lignocellulose was treated with two-step thermal-chemical processes via FeCl2 catalysis and KOH activation to generate the biochar with significantly raised adsorption capacities with two industry dyes (methylene blue and Congo red). However, the desirable biochar was attained from one-step KOH treatment with the entire brittle stalk, which was characterized as the highly-porous nanocarbon that is of the largest specific surface area at 1697.34 m2/g and 2-fold higher dyes adsorption. Notably, this nanocarbon enabled to eliminate the most toxic compounds released from CaO pretreatment and enzymatic hydrolysis, and also showed much improved electrochemical performance with specific capacitance at 205 F/g. Hence, this work has raised a mechanism model to interpret how the recalcitrance-reduced lignocellulose is convertible for high-yield bioethanol and multiple-function biochar with high performance.

Clinician- and Patient-Centred Outcomes of Digital Impressions in Infants with Cleft Lip and Palate: A Systematic Review.

This systematic review examines the effectiveness of digital impressions in infants with cleft lip and palate (CLP), focusing on accuracy, operator preferences, and parents' perceptions. The PICO-formulated focused questions assessed the accuracy and operator preference of digital impressions compared to conventional impressions in infants with cleft lip and palate, while also exploring parents' perceptions as patient-centred outcomes. Electronic and manual searches were conducted in five databases including PubMed, Scopus, Web of Science, Embase, and Cochrane Library; to acquire grey literature, Google Scholar was also consulted. Both experimental and observational studies that used digital impressions in the clinical care of infants with CLP were included. The Joanna Briggs Institute Critical Appraisal Checklist was used to assess the quality of the included studies. Out of 503 records, 12 studies met the inclusion criteria. The accuracy assessment included surface discrepancy and intra-arch measurements. Surface discrepancy studies showed variations in the premaxillary segments, while intra-arch measurements revealed no significant differences. Operators preferred digital impressions, citing reduced stress and streamlined workflows. Parents expressed a clear preference for digital over conventional impressions. The conclusions drawn were substantiated by weak evidence due to the limited number and the high risk of bias of the included studies. Challenges remain here, warranting continued research to enhance accuracy and assess parents' preferences, ensuring optimal outcomes for infants with CLP.

Efficacy of an impression disinfectant solution after repeated use: An in vitro study.

Statement of problem: There are very few studies using Benzalkonium Chloride (BAC) as an active disinfection agent for immersion techniques and there are no studies investigating the efficacy of repeated use of a disinfectant solution. Purpose: This study evaluated an impression disinfectant by testing bacterial contamination of disinfectant batches used in a clinical setting after repeated use. Materials and methods: Liquid samples were collected from impression disinfectant solutions used to disinfect dental impressions taken at a university dental clinic. The experimental samples (500 ml from 1 L of solution) were collected from teaching and professional clinics and the in-house commercial processing laboratory and stored at room temperature each day of clinic operation over five weeks. To determine to what extent the disinfectant efficacy of the active product decreased over time, the following tests were carried out: a. Inoculation b. Gram staining technique c. Matrix Assisted Laser Desorption/Ionization Mass spectrometry (MALDI- MS). Microbial growth was monitored and photographed. A culture revival was made from colonies grown on sheep blood agar, to isolate pure colonies incubated for 24 h at 37 °C. Each morphologically distinct type of colony was gram stained and MALDI spectrometry analysis was performed using the VITEK MS (BioMerieux Inc.). Results: Evidence of growth of bacteria was detected in teaching clinics' samples, and no growth from the professional clinic or the commercial laboratory. Conclusions: The study demonstrated that the impression disinfectant solution tested is effective against common oral bacteria, despite some rare species such as Bacillus circulans, Bacillus horneckiae, Bacillus altitudinis/pumilus and Bacillus cereus showing evidence of survival in solutions used for disinfection of impressions. However, in a high use teaching clinic environment its efficacy deteriorated. Though a second level disinfection protocol in the commercial laboratory-maintained impression disinfection.

Effect of pulp capping materials on odontogenic differentiation of human dental pulp stem cells: An in vitro study.

OBJECTIVES: Migration and differentiation of human dental pulp stem cells (hDPSCs) is a vital and key factor in the success of reparative dentin formation for maintenance of pulp vitality. Pulp capping materials are used to stimulate DPSCs to induce new dentin formation. Thus, the aim of the present study was to compare the response of DPSCs to four commercially available pulp capping materials: a bioactive bioceramic (Material 1), a nonresinous ready-to-use bioceramic cement (Material 2), a bioactive composite (Material 3), and a biocompatible, dual-cured, resin-modified calcium silicate (Material 4). MATERIALS AND METHODS: hDPSCs were isolated and cultured from freshly extracted teeth and were then characterized by flow cytometry and multilineage differentiation. Discs prepared from pulp capping materials were tested with hDPSCs and MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, cell migration assay and odontogenic differentiation assay was performed. Expression of osteogenic markers (osteopontin, RUNX family transcription factor 2, osteocalcin) and the odontogenic marker (dentin sialophosphoprotein) was detected using reverse transcription-polymerase chain reaction. RESULTS: Materials 1, 2, and 3 generated more cell viability than Material 4. Furthermore, Material 4 showed the least wound exposure percentage, while Material 3 showed the highest percentage. Enhanced mineralization was found in hDSCPs cultured with Material 3, followed by Material 1, and then Material 2, while Material 4 revealed the least calcified mineralization. CONCLUSIONS: The results of this study were inconclusive regards contemporary bioceramic materials designed for vital pulp therapy as they have different effects on hDPSC. Further testing for cytotoxicity using live-dead staining, animal experiments, clinical trials, and independent analyses of these biomaterials is necessary for clinicians to make an informed decision for their use.

The Impact of Different Irrigation Regimens on the Chemical Structure and Cleanliness of Root Canal Dentin.

Introduction: This in vitro study aimed to evaluate the effect of different irrigation regimens on the chemical composition and cleanliness of root canal dentin. Materials and Methods: Forty-eight extracted single-rooted permanent human teeth were collected. Root canals were instrumented using step-back technique up to master apical file size 60. Samples were divided into 3 groups (n=16) based on the type of the irrigant used. The irrigation solutions were 5.25% sodium hypochlorite, 2% chlorhexidine gluconate, and saline solution as a control. Root canal cleanliness was assessed using stereomicroscope and scanning electron microscope. Scanning electron microscope energy dispersive X-ray was used for the inorganic analysis. Fourier transform infrared spectrometer was used for the organic analysis. One-way analysis of variance (ANOVA) and multiple comparison post hoc test were used for comparison between the three groups. Results: The highest mean percentage of remaining debris was in saline group followed by chlorhexidine gluconate group. Sodium hypochlorite group showed the lowest mean value of remaining debris. Furthermore, our results showed that canal irrigation with sodium hypochlorite affected the chemical structure of root canal dentin more than chlorhexidine gluconate. Conclusions: Based on the results, 5.25% sodium hypochlorite emerges as the preferred irrigant for root canal treatment. This research sheds light on the significance of irrigation regimens in endodontics and emphasizes the need for careful consideration of irrigant selection in clinical practice.

Management of hormonal induced recurrent ulcerative fibrous epulis with osseous metaplasia: A case report.

Key Clinical Message: Understanding the role of hormones in periodontitis is important. Periodontal microscopic surgery approach in the treatment of fibrous epulis is not indicated. Wider flap access with root planning is indicated to control the lesion in one phase. Abstract: We present a case of a 40-year-old female who presented with a gingival hyperplastic lesion around the maxillary left permanent central and lateral incisors. Patient's medical history reveals a recent pregnancy, hypothyroidism, ulcerative colitis, and schizoaffective disorder. All medical conditions were controlled by medications. The lesion was excised using a minimally invasive periodontal surgical technique, and the biopsy results confirmed a diagnosis of ulcerative fibrous epulis with osseous metaplasia. No curettage or local debridement was done under the assumption that the patient's oral hygiene was satisfactory and due to aesthetic concerns of gingival recession and creation of black triangles. The lesion recurred after 3 months and was removed using a traditional more invasive surgical technique. The patient was followed up for 2 years, and there was no further recurrence due to the complete excision of the lesion in the second surgery and the disappearance of the hormonal-related factors post-pregnancy that could have contributed to the gingival hyperplasia. The unique component of the case we are presenting is the comparison between two different surgical techniques and the conduction versus absence of local periodontal debridement after surgical excision as well as the possible correlation between oral supplements and the calcific nature of the lesion(s) reported. The case we present demonstrates that a more invasive traditional surgical approach together with local periodontal therapy provide an optimum treatment outcome in conjunction with elimination of any associated etiological factors. We also propose that hormones are more important as an etiological factor in developing fibrous epulis lesions than medical conditions and medications.

Assessment of Five Concrete Types as Candidate Shielding Materials for a Compact Radiation Source Based on the IECF.

A radiation source based on the inertial electrostatic confinement fusion (IECF) system is being developed for multidisciplinary research applications. The radiation outputs from the IECF system are 2.45 MeV fast neutrons and the associated co-generated X-rays with an energy less than 3 MeV. A radiation shielding study has been performed on five types of concrete to define the most efficient material for the shielding design of the system. The proposed materials were ilmenite-magnetite concrete (IMC), ordinary concrete-1 (OC-1), barite-containing concrete (BC), ordinary concrete-2 (OC-2), and serpentine-containing concrete (SC). A numerical model was applied to determine the effective removal cross-section coefficients (∑Rt) for the fast neutrons and the total mass attenuation coefficients (µm), the half-value layer (HVL), the mean free path (MFP), the effective atomic number (Zeff), and effective electron density (Neff) for photons inside the materials. The model considered the radiation source energy and the material properties of the concrete types. The results revealed that the serpentine-containing concrete exhibited the highest ∑Rt with 12 cm of concrete thickness needed to attenuate an incident neutron flux to 1/100 of its initial value. In addition, the BC shows the highest µm with a 38 cm concrete thickness needed to attenuate the 3 MeV energy X-ray flux to 1/100 of its initial value. This study suggests that a 40 cm thickness of SC or BC adequately shields the radiation generated from an IECF system with a maximum particle production rate of up to 1 × 107 n/s.

Microbial Analysis of Obturators During Maxillofacial Prosthodontic Treatment Over an 8-Year Period.

The aim of the study was to investigate the microbial colonization (by Candida species, anaerobic and facultative anaerobic bacteria) of maxillary obturators used for the restoration of maxillary defects, including during radiotherapy.Retrospective cohort study.Fifteen patients requiring a maxillary obturator prosthesis had swabs of their obturators and adjacent tissues taken at different stages of their treatment over a period of 8 years.Identification of microbial species from the swabs was carried out using randomly amplified polymorphic DNA polymerase chain reaction (RAPD PCR) analysis, checkerboard DNA-DNA hybridization, CHROMagar Candida chromogenic agar, and DNA sequencing.Candida species were detected in all patients and all patients developed mucositis and candidiasis during radiotherapy which was associated with an increase in colonization of surfaces with Candida spp., particularly C albicans. Microbial colonization increased during radiotherapy and as an obturator aged, and decreased following a reline, delivery of a new prosthesis, or antifungal treatment during radiotherapy.Microbial colonization of maxillary obturators was related to the stage of treatment, age of the obturator material, radiotherapy and antifungal medications, and antifungal treatment may be recommended if C albicans colonization of palatal tissues is greater than 105 colony-forming units per cm2 following the first week of radiotherapy.

Accuracy evaluation of 3D-printed guide-assisted flapless micro-osteoperforations in the anterior mandible.

AIM: To evaluate the accuracy of tridimensional (3D)-printed guide-assisted flapless cortical bone micro-osteoperforations (MOPs) in the anterior mandible on a cadaver model. MATERIALS AND METHODS: Five human cadaver heads with complete dentition in the anterior mandible were used in the present study. Preplanning CBCT and intraoral surface scans were obtained. After alignment, drilling sites in the interradicular areas were planned from canine to canine, and a surgical guide was printed. The drilling was performed and a postprocedure CBCT scan was obtained to assess the accuracy of the procedure in relation to the virtual planning. RESULTS: The mean ± standard deviation (SD) mesiodistal interradicular space was 2.67 ± 0.84 mm. The mean ± SD error of the actual drilled hole compared with the planned position of the mesial drill site was 0.66 ± 0.33 mm, and to the distal drill site it was 0.56 ± 0.33 mm. There was a statistically significant difference between the number of times the teeth were hit mesially (10 out of 64 holes) and distally (none). CONCLUSIONS: The proposed technique, limited to an ex vivo scenario, provides a valid and reliable method for mandibular MOPs using a 3D-generated surgical guide. However, the risk of damaging adjacent radicular surfaces, particularly in areas with limited mesiodistal interradicular bone, needs to be considered. Further studies should focus on using thinner drills and adding other methods to stabilize the guide. Additionally, by selecting individuals and perforation sites with more mesiodistal interradicular bone, less damage is likely. (Int J Comput Dent 2022;25(4):387-0; doi: 10.3290/j.ijcd.b2599841).

Attenuating Effect of Vitamin E against Silver Nano Particles Toxicity in Submandibular Salivary Glands.

Silver nanoparticles (AgNPs) are extensively used in many industries due to their superior antimicrobial properties. However, it is evident from many studies that AgNPs has cytotoxic potential through its effect on excessive formation of reactive oxygen species (ROS). The aim of this study was to examine the toxic effect of AgNPs on the submandibular salivary glands and the attenuating effect of vitamin E, as a natural antioxidant, against this toxicity. Thirty Albino rats were divided into 3 groups (n = 10): control group, AgNPs group receiving 2 mg/kg daily for 28 days, and AgNPs and vitamin E group receiving AgNPs the same as the previous group in addition to vitamin E at a dose of 100 mg/kg. Microscopic, ultrastructural, and cytokeratin immune-reactivity examination of the glands were performed. The AgNPs group showed noticeable degeneration in all structures of the gland as evident in the histological and ultrastructural examination. The AgNPs and vitamin E group revealed an improvement of the glandular elements. A significant increase in cytokeratin immune expression was found after comparison of both groups (p = 0.01). This current study shows that vitamin E has powerful antioxidant properties, which can combat the cytotoxic effect caused by AgNPs. Further studies are deemed necessary to confirm this finding using other immunohistochemical markers, such as myosin and E-cadherin.

A simplified CAD/CAM extraoral surgical guide for therapeutic injections.

Therapeutic injections into the craniofacial region can be a complex procedure because of the nature of its anatomical structure. This technical note demonstrates a process for creating an extra-oral template to inject therapeutic substances into the temporomandibular joint and the lateral pterygoid muscle. The described process involves merging cone-beam computed tomography data and extra-oral facial scans obtained using a mobile device to establish a correlated data set for virtual planning. Virtual injection points were simulated using existing dental implant planning software to assist clinicians in precisely targeting specific anatomical structures. A template was designed and then 3D printed. The printed template showed adequate surface fit. This innovative process demonstrates a potential new clinical technique. However, further validation and in vivo trials are necessary to assess its full potential.

Positioning accuracy assessment of minimally invasive percutaneous injection techniques for the treatment of temporomandibular disorders.

OBJECTIVE: The aim of the present study was to evaluate the accuracy of an extraoral CBCT-planned 3D-printed surgical guide aimed to percutaneous injection of substances into the temporomandibular joint (TMJ) and the lateral pterygoid muscle (LPM). METHODS: Nine human cadaver heads were used. Pre-planning CBCT and facial scans were obtained and three percutaneous injection sites were planned: one for the lower compartment of the TMJ and two for the LPM. A digital surgical guide was then designed with small titanium sleeves and printed by a 3D printer. After the injections, new CBCT scans with the needles in place were obtained in order to assess the accuracy of the procedure in relation to the virtual planning. RESULTS: The mean values for angle deviation were very low (range 1.13o-4.08o), the same happening for the mean difference in the length reached (range 1.82-2.64 mm), as well as for the mean difference in the needle tip dislocation (range 0.94-2.03 mm). CONCLUSION: The guide seems to be a reliable tool for accurate percutaneous injection of drugs into the inferior compartment of the TMJ and the LPM. Further studies are necessary to test the efficacy and validate the method in an in vivo study.

Intermittent Parathyroid Hormone Accelerates Stress Fracture Healing More Effectively Following Cessation of Bisphosphonate Treatment.

Parathyroid hormone (PTH) and bisphosphonates (BPs), including alendronate (ALN), have opposing effects on bone dynamics. The extent to which PTH remains effective in the treatment of stress fracture (SFx) in the presence of an ongoing BP treatment has not been tested. SFx was induced in 150 female Wistar rats, divided into five equal groups (n = 30). All rats were pretreated with ALN (1 µg/kg-1/day-1) for 14 days prior to SFx induction, followed by ALN cessation or continuation for the duration of the experiment; this was combined with daily PTH (8 µg/100 g-1/day-1) on SFx induction for 14 days, followed by cessation or continuation of ALN after SFx induction or an equivalent vehicle as a control. Ulnas were examined 2 weeks or 6 weeks following SFx. Two toluidine blue- and two tartrate-resistant acid phosphatase-stained sections were examined for histomorphometric analysis using Osteomeasure software. There was a significant interaction between the effects of time and treatment type on the woven bone width and apposition rate, as well as an improvement in the woven bone architecture. However, woven bone variables remained unaffected by the cessation or continuation of ALN. Cessation of ALN increased osteoclast number when compared with the ALN-PTH continuation group (p = 0.006), and vehicle (p = 0.024) after 2 weeks. There was a significant interaction between the effects of time and treatment type on the number of osteoclasts per unit BMU area and length. The number of osteoclasts per unit BMU area and length was significantly greater in ALN cessation groups. It was concluded that intermittent short-duration iPTH treatment effectively increased remodeling of SFx with a concurrent BP treatment, provided that BP was ceased at the time of SFx. Our results could help develop shorter iPTH treatment protocols for the clinical management of SFxs and guide clinical decision-making to cease BP treatment in cases of SFx. © 2020 The Authors. JBMR Plus published by Wiley Periodicals LLC. on behalf of American Society for Bone and Mineral Research.

Effects of Lasers and Their Delivery Characteristics on Machined and Micro-Roughened Titanium Dental Implant Surfaces.

The aim of the study was to investigate the effects of neodymium: yttrium aluminium garnet (Nd:YAG) (1064 nm) and erbium: yttrium aluminium garnet (Er:YAG) (2940 nm) laser energy on titanium when delivered with conventional optics (focusing handpieces or plain ended optical fibres) or with a conical tip. Machined and micro-roughened implant discs were subjected to laser irradiation under a variety of energy settings either dry (without water) or wet (with water). Samples were scanned using a 3D non-contact laser profilometer and analysed for surface roughness, volume of peaks and the maximum diameter of the ablated area. Conical tip designs when used with both lasers showed no surface effect at any power setting on both machined and micro-roughened implant surfaces, regardless of the irrigation condition. When used with conventional delivery systems, laser effects on titanium were dose related, and were more profound with the Nd:YAG than with the Er:YAG laser. High laser pulse energies caused surface fusion which reduced the roughness of micro-roughened titanium surfaces. Likewise, repeated pulses and higher power densities also caused greater surface modifications. The presence of water reduced the influence of laser irradiation on titanium. It may be concluded that conical fibres can reduce unwanted surface modification, and this may be relevant to clinical protocols for debridement or disinfection of titanium dental implants.

Emerging therapies with potential risks of medicine-related osteonecrosis of the jaw: a review of the literature.

In the past, osteonecrosis of the jaw (ONJ) was generally reported with bisphosphonate drugs; hence, the term BRONJ (bisphosphonate-related osteonecrosis of the jaw) was initially proposed. This was followed by the term ARONJ (antiresorptive osteonecrosis of the jaw). More recently, other novel medications such as vascular endothelial growth factor (VEGF) inhibitors, tyrosine kinase inhibitors and humanised antibodies that affect osteoclastic action have been reported to initiate ONJ in several cases. For this reason, in 2014, the American Association of Oral and Maxillofacial Surgeons (AAOMS) changed the term to MRONJ - medication-related osteonecrosis of the jaw. The review primarily focuses on ONJ associated with emerging therapies for the management of bone disorders. This article sheds some light on the risk factors that predispose dental patients to the development of osteonecrosis, the mechanisms of drug therapies associated with MRONJ, and potential treatment and management regimes for MRONJ patients. The current review noted that the incidence and associated risk of MRONJ is significant with the new therapeutic agents discussed. Therefore, for optimised patient care, pharmacovigilance with the new medications is essential for dental professionals.