Resistive Memristors Using Robust Electropolymerized Porous Organic Polymer Films as Switchable Materials.

Porous organic polymers (POPs) with inherent porosity, tunable pore environment, and semiconductive property are ideally suitable for application in various advanced semiconductor-related devices. However, owing to the lack of processability, POPs are usually prepared in powder forms, which limits their application in advanced devices. Herein, we demonstrate an example of information storage application of POPs with film form prepared by an electrochemical method. The growth process of the electropolymerized films in accordance with the Volmer-Weber model was proposed by observation of atomic force microscopy. Given the mechanism of the electron transfer system, we verified and mainly emphasized the importance of porosity and interfacial properties of porous polymer films for memristor. As expected, the as-fabricated memristors exhibit good performance on low turn-on voltage (0.65 ± 0.10 V), reliable data storage, and high on/off current ratio (104). This work offers inspiration for applying POPs in the form of electropolymerized films in various advanced semiconductor-related devices.

Clinical observation of extraction-site incisional hernia after laparoscopic colorectal surgery.

BACKGROUND: Laparoscopic colorectal cancer surgery increases the risk of incisional hernia (IH) at the tumor extraction site. AIM: To investigate the incidence of IH at extraction sites following laparoscopic colorectal cancer surgery and identify the risk factors for IH incidence. METHODS: This study retrospectively analyzed the data of 1614 patients who underwent laparoscopic radical colorectal cancer surgery with tumor extraction through the abdominal wall at our center between January 2017 and December 2022. Differences in the incidence of postoperative IH at different extraction sites and the risk factors for IH incidence were investigated. RESULTS: Among the 1614 patients who underwent laparoscopic radical colorectal cancer surgery, 303 (18.8%), 923 (57.2%), 171 (10.6%), and 217 (13.4%) tumors were extracted through supraumbilical midline, infraumbilical midline, umbilical, and off-midline incisions. Of these, 52 patients developed IH in the abdominal wall, with an incidence of 3.2%. The incidence of postoperative IH was significantly higher in the off-midline incision group (8.8%) than in the middle incision groups [the supraumbilical midline (2.6%), infraumbilical midline (2.2%), and umbilical incision (2.9%) groups] (χ2 = 24.985; P < 0.05). Univariate analysis showed that IH occurrence was associated with age, obesity, sex, chronic cough, incision infection, and combined diabetes, anemia, and hypoproteinemia (P < 0.05). Similarly, multivariate analysis showed that off-midline incision, age, sex (female), obesity, incision infection, combined chronic cough, and hypoproteinemia were independent risk factors for IH at the site of laparoscopic colorectal cancer surgery (P < 0.05). CONCLUSION: The incidence of postoperative IH differs between extraction sites for laparoscopic colorectal cancer surgery. The infraumbilical midline incision is associated with a lower hernia rate and is thus a suitable tumor extraction site.

The orientation of CpG conjugation on aluminum oxyhydroxide nanoparticles determines the immunostimulatory effects of combination adjuvants.

In subunit vaccines, aluminum salts (Alum) are commonly used as adjuvants, but with limited cellular immune responses. To overcome this limitation, CpG oligodeoxynucleotides (ODNs) have been used in combination with Alum. However, current combined usage of Alum and CpG is limited to linear mixtures, and the underlying interaction mechanism between CpG and Alum is not well understood. Thus, we propose to chemically conjugate Alum nanoparticles and CpG (with 5' or 3' end exposed) to design combination adjuvants. Our study demonstrates that compared to the 3'-end exposure, the 5'-end exposure of CpG in combination adjuvants (Al-CpG-5') enhances the activation of bone-marrow derived dendritic cells (BMDCs) and promotes Th1 and Th2 cytokine secretion. We used the SARS-CoV-2 receptor binding domain (RBD) and hepatitis B surface antigen (HBsAg) as model antigens to demonstrate that Al-CpG-5' enhanced antigen-specific antibody production and upregulated cytotoxic T lymphocyte markers. Additionally, Al-CpG-5' allows for coordinated adaptive immune responses even at lower doses of both CpG ODNs and HBsAg antigens, and enhances lymph node transport of antigens and activation of dendritic cells, promoting Tfh cell differentiation and B cell activation. Our novel Alum-CPG strategy points the way towards broadening the use of nanoadjuvants for both prophylactic and therapeutic vaccines.

CD39hi identifies an exhausted tumor-reactive CD8+ T cell population associated with tumor progression in human gastric cancer.

The ectonucleotidase CD39 has been regarded as a promising immune checkpoint in solid tumors. However, the expression of CD39 by tumor-infiltrating CD8+ T cells as well as their potential roles and clinical implications in human gastric cancer (GC) remain largely unknown. Here, we found that GC-infiltrating CD8+ T cells contained a fraction of CD39hi cells that constituted about 6.6% of total CD8+ T cells in tumors. These CD39hi cells enriched for GC-infiltrating CD8+ T cells with features of exhaustion in transcriptional, phenotypic, metabolic and functional profiles. Additionally, GC-infiltrating CD39hiCD8+ T cells were also identified for tumor-reactive T cells, as these cells expanded in vitro were able to recognize autologous tumor organoids and induced more tumor cell apoptosis than those of expanded their CD39int and CD39-CD8+ counterparts. Furthermore, CD39 enzymatic activity controlled GC-infiltrating CD39hiCD8+ T cell effector function, and blockade of CD39 efficiently enhanced their production of cytokines IFN-γ and TNF-α. Finally, high percentages of GC-infiltrating CD39hiCD8+ T cells correlated with tumor progression and independently predicted patients' poor overall survival. These findings provide novel insights into the association of CD39 expression level on CD8+ T cells with their features and potential clinical implications in GC, and empowering those exhausted tumor-reactive CD39hiCD8+ T cells through CD39 inhibition to circumvent the suppressor program may be an attractive therapeutic strategy against GC.

CD39 expression defines exhausted CD4+ T cells associated with poor survival and immune evasion in human gastric cancer.

Objectives: CD4+ T cell helper and regulatory function in human cancers has been well characterised. However, the definition of tumor-infiltrating CD4+ T cell exhaustion and how it contributes to the immune response and disease progression in human gastric cancer (GC) remain largely unknown. Methods: A total of 128 GC patients were enrolled in the study. The expression of CD39 and PD-1 on CD4+ T cells in the different samples was analysed by flow cytometry. GC-infiltrating CD4+ T cell subpopulations based on CD39 expression were phenotypically and functionally assessed. The role of CD39 in the immune response of GC-infiltrating T cells was investigated by inhibiting CD39 enzymatic activity. Results: In comparison with CD4+ T cells from the non-tumor tissues, significantly more GC-infiltrating CD4+ T cells expressed CD39. Most GC-infiltrating CD39+CD4+ T cells exhibited CD45RA-CCR7- effector-memory phenotype expressing more exhaustion-associated inhibitory molecules and transcription factors and produced less TNF-α, IFN-γ and cytolytic molecules than their CD39-CD4+ counterparts. Moreover, ex vivo inhibition of CD39 enzymatic activity enhanced their functional potential reflected by TNF-α and IFN-γ production. Finally, increased percentages of GC-infiltrating CD39+CD4+ T cells were positively associated with disease progression and patients' poorer overall survival. Conclusion: Our study demonstrates that CD39 expression defines GC-infiltrating CD4+ T cell exhaustion and their immunosuppressive function. Targeting CD39 may be a promising therapeutic strategy for treating GC patients.

Construction synergetic adsorption and activation surface via confined Cu/Cu2O and Ag nanoparticles on TiO2 for effective conversion of CO2 to CH4.

High-performance photocatalysts for catalytic reduction of CO2 are largely impeded by inefficient charge separation and surface activity. Reasonable design and efficient collaboration of multiple active sites are important for attaining high reactivity and product selectivity. Herein, Cu-Cu2O and Ag nanoparticles are confined as dual sites for assisting CO2 photoreduction to CH4 on TiO2. The introduction of Cu-Cu2O leads to an all-solid-state Z-scheme heterostructure on the TiO2 surface, which achieves efficient electron transfer to Cu2O and adsorption and activation of CO2. The confined nanometallic Ag further enhances the carrier's separation efficiency, promoting the conversion of activated CO2 molecules to •COOH and further conversion to CH4. Particularly, this strategy is highlighted on the TiO2 system for a photocatalytic reduction reaction of CO2 and H2O with a CH4 generation rate of 62.5 µmol∙g-1∙h-1 and an impressive selectivity of 97.49 %. This work provides new insights into developing robust catalysts through the artful design of synergistic catalytic sites for efficient photocatalytic CO2 conversion.

Modulating Skeletons of Covalent Organic Framework for High-Efficiency Gold Recovery.

Covalent organic frameworks (COFs) have attracted considerable attention as adsorbents for capturing and separating gold from electronic wastes. To enhance the binding capture efficiency, constructing hydrogen-bond nanotraps along the pore walls was one of the most widely adopted approaches. However, the development of absorbing skeletons was ignored due to the weak binding ability of the gold salts (Au). Herein, we demonstrated skeleton engineering to construct highly efficiently absorbs for Au capture. The strong electronic donating feature of diarylamine units enhanced the electronic density of binding sites (imine-linkage) and thus resulted in high capacities over 1750 mg g-1 for all three COFs. Moreover, the absorbing performance was further improved via the ionization of diarylamine units. The ionic COF achieved 90 % of the maximal adsorption capacity, 1.63 times of that from the charge-neutral COF within ten minutes, and showed remarkable uptakes of 1834 mg g-1 , exceptional selectivity (97.45 %) and cycling stability. The theoretical calculation revealed the binding sites altering from imine bonds to ionic amine sites after ionization of the frameworks, which enabled to bind the AuCl4 - via coulomb force and contributed to enhanced absorbing kinetics. This work inspires us to design molecular/ionic capture based on COFs.

Synthesis of a covalent organic framework with hetero-environmental pores and its medicine co-delivery application.

The topology type and the functionalization of pores play an important role in regulating the performance of covalent organic frameworks. Herein, we designed and synthesized the covalent organic framework with hetero-environmental pores using predesigned asymmetrical dialdehyde monomer. According to the results of structural characterization, crystallinity investigation, and theoretical calculation, the hetero-environmental pores of the obtained framework are regarded as the alternant arrangement. The distinctive hetero pore structure leads the designed material to show more advantages as compared with control materials in loading both hydrophobic and hydrophilic antibiotics for wound healing. This dual-antibiotic strategy can expand the antibacterial range as compared with the single antibiotic one, and reduce the generation of drug resistance. In summary, this strategy for designing covalent organic frameworks with hetero-environmental pores can extend the structural variety and provide a pathway for improving the practical application performance of these materials.

Linkages Make a Difference in the Photoluminescence of Covalent Organic Frameworks.

Covalent organic frameworks (COFs) with structural designability and tunability of photophysical properties enable them to be a promising class of organic luminescent materials by incorporating well-designed fluorescent units directly into the periodic skeletons. The photophysical properties of COFs are mainly affected by the structural features, which determine the conjugation degree, charge delocalization ability, and exciton dynamics of COFs. To understand the relationship between COF structures and their photophysical properties, two COFs with the same pyrene chromophore units but different linkages (imine or vinylene) were designed and synthesized. Interestingly, different linkages endow COFs with huge differences in solid-state photoluminescence quantum yield (PLQY) for imine- and vinylene-linked pyrene-based COFs, which possess PLQY values of 0.34 % and 15.43 %, respectively. The femtosecond-transient absorption spectra and time-dependent density functional theory reveal the different charge-transfer pathways in imine- and vinylene-linked COFs, which influence the exciton relaxation way and fluorescence intensity. In addition, an effective white-light device was obtained by coating the vinylene-linked COF on a light-emitting diode strip.

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water.

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO2 ) reduction half-reaction and the water (H2 O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust -C=C- bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron-hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO2 reduction and photogenerated holes that participate in H2 O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 µmol g-1 h-1 with about 100 % selectivity) and oxygen (O2 ) evolution (90.2 µmol g-1 h-1 ) among all the porous catalysts in CO2 reduction with H2 O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure-function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.

Holey Ti3C2 MXene-Derived Anode Enables Boosted Kinetics in Lithium-Ion Capacitors.

Lithium-ion capacitors (LICs) attract enormous attention because of the urgent demands for high power and energy density devices. However, the intrinsic imbalance between anodes and cathodes with different charge-storage mechanisms blocks the further improvement in energy and power density. MXenes, novel two-dimensional materials with metallic conductivity, accordion-like structure, and regulable interlayer spacing, are widely employed in electrochemical energy storage devices. Herein, we propose a holey Ti3C2 MXene-derived composite (pTi3C2/C) with enhanced kinetics for LICs. This strategy effectively decreases the surface groups (-F and -O) and generates expanded interplanar spacing. The in-plane pores of Ti3C2Tx lead to increased active sites and accelerated lithium-ion diffusion kinetics. Benefiting from the expanded interplanar spacing and accelerated lithium-ion diffusion, the pTi3C2/C as an anode implements excellent electrochemical property (capacity retention about 80% after 2000 cycles). Furthermore, the LIC fabricated with a pTi3C2/C anode and an activated carbon cathode displays a maximum energy density of 110 Wh kg-1 and a considerable energy density of 71 Wh kg-1 at 4673 W kg-1. This work provides an effective strategy to achieve high antioxidant capability and boosted electrochemical properties, which represents a new exploration of structural design and tuneable surface chemistry for MXene in LICs.

Fluorine-Containing Covalent Organic Frameworks: Synthesis and Application.

Covalent organic frameworks (COFs) are a type of crystalline porous polymers that possess ordered structures and eternal pores. Because of their unique structural characteristics and diverse functional groups, COFs have been used in various application fields, such as adsorption, catalysis, separation, ion conduction, and energy storage. Among COFs, the fluorine-containing COFs (fCOFs) have been developed for special applications by virtue of special physical and chemical properties resulting from fluorine element, which is a nonmetallic halogen element and possesses strong electronegativity. In the organic chemistry field, introducing fluorine into chemicals enables those chemicals to exhibit many interesting properties, and fluorine chemistry increasingly plays an important role in the history of chemical development. The introduction of fluorine in COFs can enhance the crystallinity, porosity, and stability of COFs, making COFs having superior performances and some new applications. In this review, the synthesis and application of fCOFs are systematically summarized. The application involves photocatalytic production of hydrogen peroxide, photocatalytic water splitting, electrocatalytic CO2 reduction, adsorption for different substances (H2 , pesticides, per-/polyfluoroalkyl substances, polybrominated diphenyl ethers, bisphenols, and positively charged organic dye molecules), oil-water separation, energy storage (e.g., zinc-ion batteries, lithium-sulfur batteries), and proton conduction. Perspectives of remaining challenges and possible directions for fCOFs are also discussed.

Virus-Like Particle-Templated Silica-Adjuvanted Nanovaccines with Enhanced Humoral and Cellular Immunity.

Virus-like particles (VLPs) are self-assembled viral proteins that represent a superior form of antigens in vaccine formulations. To enhance immunogenicity, adjuvants, especially the aluminum salts (Alum), are essentially formulated in VLP vaccines. However, Alum only induce biased humoral immune responses that limits further applications of VLP-based vaccines. To stimulate more balanced immunity, we, herein, develop a one-step strategy of using VLPs as the biotemplates to synthesize raspberry-like silica-adjuvanted VLP@Silica nanovaccines. Hepatitis B surface antigen (HBsAg) VLPs and human papillomavirus type 18 (HPV 18) VLPs are selected as model templates. Circular dichroism (CD) and affinity analyses demonstrate that HBsAg VLPs in the nanovaccines maintain their secondary structure and immunogenicity, respectively. VLP@Silica promote silica dissolution-induced lysosomal escape and cytosolic delivery of antigens, and enhance the secretion of both Th1 and Th2 type cytokines in murine bone marrow-derived dendritic cells (BMDCs). Additionally, they could improve antigen trafficking and mediate DC activation in draining lymph nodes (DLNs). Vaccination study demonstrate that both HBsAg VLP@Silica and HPV 18 VLP@Silica nanovaccines induce enhanced antigen-specific antibody productions and T-cell mediated adaptive immune responses. This design strategy can utilize VLPs derived from a diversity of viruses or their variants as templates to construct both prophylactic and therapeutic vaccines with improved immunogenicity.

Electrochemical Preparation of Porous Organic Polymer Films for High-Performance Memristors.

Porous organic polymer films (PFs) with intrinsical porosity and tuneable pore environment are ideally suited for application in electronic devices. However, the huge challenges still exist for construction of electronic devices based on PFs owing to lack of robustness, processability, and controllable preparation. Herein, we report the electrochemical preparation of carbazole-based porous organic polymer films (eCPFs) as switchable materials for the memristors. These eCPFs possess the characteristics of controllable thickness/size, high stability, and excellent porosity. Carbazole and cyano groups are introduced into the eCPFs to constructing electron transfer systems. Thus, the memristors constructed based on these eCPFs exhibit excellent switching performance, reliability, and reproducibility. The electrochemically controllable preparation method of porous organic polymer membranes proposed in this paper provides a feasible idea for the developments of electronic devices.

Mechanistic understanding of the aspect ratio-dependent adjuvanticity of engineered aluminum oxyhydroxide nanorods in prophylactic vaccines.

Aluminum oxyhydroxide (AlOOH) adjuvants are widely used in human vaccines. However, the interaction mechanisms at the material-bio interface, and further understandings on physicochemical property-dependent modulation of the immune responses still remain uncertain. Herein, a library of AlOOH nanorods with well-defined aspect ratios is designed to explore the mechanisms of adjuvanticity. The aspect ratios of AlOOH nanorods were demonstrated to be intrinsically modulated by the hydroxide supersaturation level during crystal growth, leading to the differences in surface free energy (SFE). As a result, higher aspect ratio AlOOH nanoadjuvants with lower SFE exhibited more hydrophobic surface, resulting in more membrane depolarization, cellular uptake and dendritic cell (DC) activation. By using hepatitis B surface antigen (HBsAg) virus-like particles (VLPs) or SARS-CoV-2 spike protein receptor-binding domain (RBD) as model antigens, AlOOH nanorods with higher aspect ratio were determined to elicit more potent humoral immune responses, which could be attributed to the enhanced DC activation and the efficient antigen trafficking to the draining lymph nodes. Our findings highlight the critical role of aspect ratio of AlOOH nanorods in modulating adjuvanticity, and further provide a design strategy for engineered nanoadjuvants for prophylactic vaccines.

Porous organic polymers for electrocatalysis.

Porous organic polymers (POPs) composed of organic building units linked via covalent bonds are a class of lightweight porous network materials with high surface areas, tuneable pores, and designable components and structures. Owing to their well-preserved characteristics in terms of structure and composition, POPs applied as electrocatalysts have shown promising activity and achieved considerable advances in numerous electrocatalytic reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO2 reduction reaction, N2 reduction reaction, nitrate/nitrite reduction reaction, nitrobenzene reduction reaction, hydrogen oxidation reaction, and benzyl alcohol oxidation reaction. Herein, we present a systematic overview of recent advances in the applications of POPs in these electrocatalytic reactions. The synthesis strategies, specific active sites, and catalytic mechanisms of POPs are summarized in this review. The fundamental principles of some electrocatalytic reactions are also concluded. We further discuss the current challenges of and perspectives on POPs for electrocatalytic applications. Meanwhile, the possible future directions are highlighted to afford guidelines for the development of efficient POP electrocatalysts.

Engineered Hydroxyapatite Nanoadjuvants with Controlled Shape and Aspect Ratios Reveal Their Immunomodulatory Potentials.

Hydroxyapatite (HAP) has been formulated as adjuvants in vaccines for human use. However, the optimal properties required for HAP nanoparticles to elicit adjuvanticity and the underlying immunopotentiation mechanisms have not been fully elucidated. Herein, a library of HAP nanorods and nanospheres was synthesized to explore the effect of the particle shape and aspect ratio on the immune responses in vitro and adjuvanticity in vivo. It was demonstrated that long aspect ratio HAP nanorods induced a higher degree of cell membrane depolarization and subsequent uptake, and the internalized particles elicited cathepsin B release and mitochondrial reactive oxygen species generation, which further led to pro-inflammatory responses. Furthermore, the physicochemical property-dependent immunostimulation capacities were correlated with their humoral responses in a murine hepatitis B surface antigen immunization model, with long aspect ratio HAP nanorods inducing higher antigen-specific antibody productions. Importantly, HAP nanorods significantly up-regulated the IFN-γ secretion and CD107α expression on CD8+ T cells in immunized mice. Further mechanistic studies demonstrated that HAP nanorods with defined properties exerted immunomodulatory effects by enhanced antigen persistence and immune cell recruitments. Our study provides a rational design strategy for engineered nanomaterial-based vaccine adjuvants.

In-situelectrochemical polymerization of aniline on flexible conductive substrates for supercapacitors and non-enzymatic ascorbic acid sensors.

Polyaniline, as a kind of conductive polymer with commercial application prospects, is still under researches in its synthesis and applications. In this work, polyaniline was fabricated on flexible substrates including carbon cloths and polyethylene naphthalate byin situelectropolymerization method. The synthesized flexible electrodes were characterized by scanning electron microscopy, High resolution transmission electron microscope, atomic force microscope, Fourier transform infrared, x-ray diffraction, and x-ray photoelectron spectroscopy. Owing to the conductivity and the reversible redox property, the polyaniline/carbon cloth electrodes show excellent properties such as decent supercapacitor performance and good detection capability toward ascorbic acid. As supercapacitors, the electrodes exhibit a specific capacitance as high as 776 F g-1at a current density of 1 A g-1and a long cycle life of 20 000 times in the three-electrode system. As ascorbic acid sensors, the flexible electrodes demonstrate stable response to ascorbic acid in the range of 1-3000µM with an outstanding sensitivity (4228µA mM-1cm-2), low detection limit (1µM), and a fast response time. This work holds promise for high-performance and low-cost flexible electrodes for both supercapacitors and non-enzymatic ascorbic acid sensors, and may inspire inventions of self-powered electrochemical sensor.

Synergistic Catalysis of Ionic Liquid-Decorated Covalent Organic Frameworks with Polyoxometalates for CO2 Cycloaddition Reaction under Mild Conditions.

The cycloaddition of carbon dioxide (CO2) with epoxides to yield highly value-added cyclic carbonates is an effective way to chemically utilize and convert CO2. Here, a heterogeneous catalyst of imidazole ionic liquid-decorated covalent organic framework with polyoxometalates (POM@ImTD-COF) was constructed by the covalent modification of ionic liquids to COFs and the electrostatic interaction between POMs and ionic liquids. The obtained POM@ImTD-COF shows high catalytic activity for CO2 cycloaddition reaction under mild conditions (1 atm and 80 °C) in the presence of a co-catalyst, and the catalytic activity of POM@ImTD-COF has no obvious decrease during reusing five times. The excellent catalytic performance is mainly attributed to the synergistic effect of ionic liquids, POMs, and COFs. In the cycloaddition process, ionic liquids and the co-catalyst weaken the C-O bond of epoxides and promote the ring opening of epoxides. POMs as the Lewis acids facilitate the insertion of CO2 to form reaction intermediates. The multiple activation effect of ionic liquids and POMs together with the CO2 adsorption effect and well-dispersed active sites in COFs contribute to the remarkable catalytic performance.

Comparative and functional genomics of the ABC transporter superfamily across arthropods.

BACKGROUND: The ATP-binding cassette (ABC) transporter superfamily is comprised predominantly of proteins which directly utilize energy from ATP to move molecules across the plasma membrane. Although they have been the subject of frequent investigation across many taxa, arthropod ABCs have been less well studied. While the manual annotation of ABC transporters has been performed in many arthropods, there has so far been no systematic comparison of the superfamily within this order using the increasing number of sequenced genomes. Furthermore, functional work on these genes is limited. RESULTS: Here, we developed a standardized pipeline to annotate ABCs from predicted proteomes and used it to perform comparative genomics on ABC families across arthropod lineages. Using Kruskal-Wallis tests and the Computational Analysis of gene Family Evolution (CAFE), we were able to observe significant expansions of the ABC-B full transporters (P-glycoproteins) in Lepidoptera and the ABC-H transporters in Hemiptera. RNA-sequencing of epithelia tissues in the Lepidoptera Helicoverpa armigera showed that the 7 P-glycoprotein paralogues differ substantially in their tissue distribution, suggesting a spatial division of labor. It also seems that functional redundancy is a feature of these transporters as RNAi knockdown showed that most transporters are dispensable with the exception of the highly conserved gene Snu, which is probably due to its role in cuticular formation. CONCLUSIONS: We have performed an annotation of the ABC superfamily across > 150 arthropod species for which good quality protein annotations exist. Our findings highlight specific expansions of ABC transporter families which suggest evolutionary adaptation. Future work will be able to use this analysis as a resource to provide a better understanding of the ABC superfamily in arthropods.