A modified CD34+ hematopoietic stem and progenitor cell isolation strategy from cryopreserved human umbilical cord blood.

BACKGROUND: Umbilical cord blood (UCB) is a source of hematopoietic stem cells for transplantation, offering an alternative for patients unable to find a matched adult donor. UCB is also a versatile source of hematopoietic stem and progenitor cells (hCD34 + HSPCs) for research into hematologic diseases, in vitro expansion, ex vivo gene therapy, and adoptive immunotherapy. For these studies, there is a need to isolate hCD34 + HSPCs from cryopreserved units, and protocols developed for isolation from fresh cord blood are unsuitable. STUDY DESIGN: This study describes a modified method for isolating hCD34 + HSPCs from cryopreserved UCB. It uses the Plasmatherm system for thawing, followed by CD34 microbead magnetic-activated cell sorting isolation with a cell separation kit (Whole Blood Columns, Miltenyi Biotec). hCD34 + HSPC phenotypes and functionality were assessed in vitro and hematologic reconstitution determined in vivo in immunodeficient mice. RESULTS: Total nucleated cell recovery after thawing and washing was 44.7 ± 11.7%. Recovery of hCD34 + HSPCs after application of thawed cells to Whole Blood Columns was 77.5 ± 22.6%. When assessed in two independent laboratories, the hCD34+ cell purities were 71.7 ± 10.7% and 87.8 ± 2.4%. Transplantation of the enriched hCD34 + HSPCs into NSG mice revealed the presence of repopulating hematopoietic stem cells (estimated frequency of 0.07%) and multilineage engraftment. CONCLUSION: This provides a simplified protocol for isolating high-purity human CD34 + HSPCs from banked UCB adaptable to current Good Manufacturing Practice. This protocol reduces the number of steps and associated risks and thus total production costs. Importantly, the isolated CD34 + HSPCs possess in vivo repopulating activity in immunodeficient mice, making them a suitable starting population for ex vivo culture and gene editing.

Multi-stage bioengineering of a layered oesophagus with in vitro expanded muscle and epithelial adult progenitors.

A tissue engineered oesophagus could overcome limitations associated with oesophageal substitution. Combining decellularized scaffolds with patient-derived cells shows promise for regeneration of tissue defects. In this proof-of-principle study, a two-stage approach for generation of a bio-artificial oesophageal graft addresses some major challenges in organ engineering, namely: (i) development of multi-strata tubular structures, (ii) appropriate re-population/maturation of constructs before transplantation, (iii) cryopreservation of bio-engineered organs and (iv) in vivo pre-vascularization. The graft comprises decellularized rat oesophagus homogeneously re-populated with mesoangioblasts and fibroblasts for the muscle layer. The oesophageal muscle reaches organised maturation after dynamic culture in a bioreactor and functional integration with neural crest stem cells. Grafts are pre-vascularised in vivo in the omentum prior to mucosa reconstitution with expanded epithelial progenitors. Overall, our optimised two-stage approach produces a fully re-populated, structurally organized and pre-vascularized oesophageal substitute, which could become an alternative to current oesophageal substitutes.

Application of Raman Spectroscopy and Univariate Modelling As a Process Analytical Technology for Cell Therapy Bioprocessing.

Cell therapies offer unquestionable promises for the treatment, and in some cases even the cure, of complex diseases. As we start to see more of these therapies gaining market authorization, attention is turning to the bioprocesses used for their manufacture, in particular the challenge of gaining higher levels of process control to help regulate cell behavior, manage process variability, and deliver product of a consistent quality. Many processes already incorporate the measurement of key markers such as nutrient consumption, metabolite production, and cell concentration, but these are often performed off-line and only at set time points in the process. Having the ability to monitor these markers in real-time using in-line sensors would offer significant advantages, allowing faster decision-making and a finer level of process control. In this study, we use Raman spectroscopy as an in-line optical sensor for bioprocess monitoring of an autologous T-cell immunotherapy model produced in a stirred tank bioreactor system. Using reference datasets generated on a standard bioanalyzer, we develop chemometric models from the Raman spectra for glucose, glutamine, lactate, and ammonia. These chemometric models can accurately monitor donor-specific increases in nutrient consumption and metabolite production as the primary T-cell transition from a recovery phase and begin proliferating. Using a univariate modeling approach, we then show how changes in peak intensity within the Raman spectra can be correlated with cell concentration and viability. These models, which act as surrogate markers, can be used to monitor cell behavior including cell proliferation rates, proliferative capacity, and transition of the cells to a quiescent phenotype. Finally, using the univariate models, we also demonstrate how Raman spectroscopy can be applied for real-time monitoring. The ability to measure these key parameters using an in-line Raman optical sensor makes it possible to have immediate feedback on process performance. This could help significantly improve cell therapy bioprocessing by allowing proactive decision-making based on real-time process data. Going forward, these types of in-line sensors also open up opportunities to improve bioprocesses further through concepts such as adaptive manufacturing.

Rapid phenotypic fingerprinting of cell products by robust measurement of ubiquitous surface markers.

Flow cytometry is one of the most versatile and powerful approach for the quantitative analysis of cell suspensions. With widespread applications in basic and clinical research, its commonest use is in the detection of cell populations labelled against markers specific for a particular phenotype. In this study, we aimed to expand the potential of flow cytometry by describing a method based on robust automated quantification of ubiquitous cell surface markers. We demonstrate that automatic fluorescence standardization combined with whole cell population analysis yields highly reproducible results and can alleviate many of the difficulties associated with conventional analyses. This new generic approach is very flexible for quantifying the uniqueness of entire cell populations regardless of their composition. It provides quantitative phenotypic fingerprints rapidly, does not incorporate subjective factors, is more amenable to standardization, and is easily transferable across a wide diversity of applications, such as quality control for cell manufacture and authentication of cell products.

Quantification of cells with specific phenotypes I: determination of CD4+ cell count per microliter in reconstituted lyophilized human PBMC prelabeled with anti-CD4 FITC antibody.

A surface-labeled lyophilized lymphocyte (sLL) preparation has been developed using human peripheral blood mononuclear cells prelabeled with a fluorescein isothiocyanate conjugated anti-CD4 monoclonal antibody. The sLL preparation is intended to be used as a reference material for CD4+ cell counting including the development of higher order reference measurement procedures and has been evaluated in the pilot study CCQM-P102. This study was conducted across 16 laboratories from eight countries to assess the ability of participants to quantify the CD4+ cell count of this reference material and to document cross-laboratory variability plus associated measurement uncertainties. Twelve different flow cytometer platforms were evaluated using a standard protocol that included calibration beads used to obtain quantitative measurements of CD4+ T cell counts. There was good overall cross-platform and counting method agreement with a grand mean of the laboratory calculated means of (301.7 ± 4.9) µL(-1) CD4+ cells. Excluding outliers, greater than 90% of participant data agreed within ±15%. A major contribution to variation of sLL CD4+ cell counts was tube to tube variation of the calibration beads, amounting to an uncertainty of 3.6%. Variation due to preparative steps equated to an uncertainty of 2.6%. There was no reduction in variability when data files were centrally reanalyzed. Remaining variation was attributed to instrument specific differences. CD4+ cell counts obtained in CCQM-P102 are in excellent agreement and show the robustness of both the measurements and the data analysis and hence the suitability of sLL as a reference material for interlaboratory comparisons and external quality assessment.

Validation of high-throughput single cell analysis methodology.

High-throughput quantitative polymerase chain reaction (qPCR) approaches enable profiling of multiple genes in single cells, bringing new insights to complex biological processes and offering opportunities for single cell-based monitoring of cancer cells and stem cell-based therapies. However, workflows with well-defined sources of variation are required for clinical diagnostics and testing of tissue-engineered products. In a study of neural stem cell lines, we investigated the performance of lysis, reverse transcription (RT), preamplification (PA), and nanofluidic qPCR steps at the single cell level in terms of efficiency, precision, and limit of detection. We compared protocols using a separate lysis buffer with cell capture directly in RT-PA reagent. The two methods were found to have similar lysis efficiencies, whereas the direct RT-PA approach showed improved precision. Digital PCR was used to relate preamplified template copy numbers to Cq values and reveal where low-quality signals may affect the analysis. We investigated the impact of calibration and data normalization strategies as a means of minimizing the impact of inter-experimental variation on gene expression values and found that both approaches can improve data comparability. This study provides validation and guidance for the application of high-throughput qPCR workflows for gene expression profiling of single cells.

Comparison of reverse transcription-quantitative polymerase chain reaction methods and platforms for single cell gene expression analysis.

Single cell gene expression analysis can provide insights into development and disease progression by profiling individual cellular responses as opposed to reporting the global average of a population. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) is the "gold standard" for the quantification of gene expression levels; however, the technical performance of kits and platforms aimed at single cell analysis has not been fully defined in terms of sensitivity and assay comparability. We compared three kits using purification columns (PicoPure) or direct lysis (CellsDirect and Cells-to-CT) combined with a one- or two-step RT-qPCR approach using dilutions of cells and RNA standards to the single cell level. Single cell-level messenger RNA (mRNA) analysis was possible using all three methods, although the precision, linearity, and effect of lysis buffer and cell background differed depending on the approach used. The impact of using a microfluidic qPCR platform versus a standard instrument was investigated for potential variability introduced by preamplification of template or scaling down of the qPCR to nanoliter volumes using laser-dissected single cell samples. The two approaches were found to be comparable. These studies show that accurate gene expression analysis is achievable at the single cell level and highlight the importance of well-validated experimental procedures for low-level mRNA analysis.

Dynamic monitoring of metal oxide nanoparticle toxicity by label free impedance sensing.

The increased use of nanoparticles in industrial and medical products is driving the need for accurate, high throughput in vitro testing procedures to screen new particles for potential toxicity. While approaches using standard viability assays have been widely used, there have been increased reports of the interactions of nanoparticles with their soluble labels or optical readouts which raise concerns over the potential generation of false positive results. Here, we describe the use of an impedance spectroscopy approach to provide real-time reagent free detection of toxicity for a panel of metal oxide nanoparticles (ZnO, CuO, and TiO(2)). Using this approach, we show how impedance measurements can be used to track nanoparticle toxicity over time with comparable IC(50) values to those of standard assays (ZnO-55 µg/mL, CuO-28 µg/mL) as well as being used to identify a critical 6 h period following exposure during which the nanoparticles trigger rapid cellular responses. Through targeted analysis during this response period and the use of a novel image analysis approach, we show how the ZnO and CuO nanoparticles trigger the active export of intracellular glutathione via an increase in the activity of the ATP dependent MRP/1 efflux pumps. The loss of glutathione leads to increased production of reactive oxygen species which after 2.5 h triggers the cells to enter apoptosis resulting in a dose dependent cytotoxic response. This targeted testing strategy provides comprehensive information beyond that achieved with standard toxicity assays and indicates the potential for cell-nanoparticle interactions that could occur following in vivo exposure.

The use of multidimensional image-based analysis to accurately monitor cell growth in 3D bioreactor culture.

The transition from traditional culture methods towards bioreactor based bioprocessing to produce cells in commercially viable quantities for cell therapy applications requires the development of robust methods to ensure the quality of the cells produced. Standard methods for measuring cell quality parameters such as viability provide only limited information making process monitoring and optimisation difficult. Here we describe a 3D image-based approach to develop cell distribution maps which can be used to simultaneously measure the number, confluency and morphology of cells attached to microcarriers in a stirred tank bioreactor. The accuracy of the cell distribution measurements is validated using in silico modelling of synthetic image datasets and is shown to have an accuracy >90%. Using the cell distribution mapping process and principal component analysis we show how cell growth can be quantitatively monitored over a 13 day bioreactor culture period and how changes to manufacture processes such as initial cell seeding density can significantly influence cell morphology and the rate at which cells are produced. Taken together, these results demonstrate how image-based analysis can be incorporated in cell quality control processes facilitating the transition towards bioreactor based manufacture for clinical grade cells.

Rat primary hepatocytes show enhanced performance and sensitivity to acetaminophen during three-dimensional culture on a polystyrene scaffold designed for routine use.

The in vitro evaluation of hepatotoxicity is an essential stage in the research and development of new pharmaceuticals as the liver is one of the most commonly impacted organs during preclinical toxicity studies. Fresh primary hepatocytes in monolayer culture are the most commonly used in vitro model of the liver but often exhibit limited viability and/or reduction or loss of important liver-specific functions. These limitations could potentially be overcome using three-dimensional (3D) culture systems, but their experimental nature and limited use in liver toxicity screening and drug metabolism has impaired their uptake into commercial screening programs. In this study we use a commercially available polystyrene scaffold developed for routine 3D cell culture to maintain primary rat hepatocytes for use in metabolism and toxicity studies over 72 h. We show that primary hepatocytes retain their natural cuboidal morphology with significantly higher viability (>74%) than cells grown in monolayer culture (maximum of 57%). Hepatocytes in the 3D scaffolds exhibit differential expression of genes associated with phase I, II, and III drug metabolism under basal conditions compared with monolayer culture and can be induced to stably express significantly higher levels of the cytochrome-P450 enzymes 1A2, 2B1, and 3A2 over 48 h. In toxicity studies the hepatocytes in the 3D scaffolds also show increased sensitivity to the model toxicant acetaminophen. These improvements over monolayer culture and the availability of this new easy to use 3D scaffold system could facilitate the uptake of 3D technologies into routine drug screening programs.

Increased neuronal proliferation in the dentate gyrus of aged rats following neural stem cell implantation.

It is now well accepted that the brain is able to generate newborn neurons from a population of resident multipotential neural stem cells (NSCs) located in two discrete regions of the brain. The capacity for neurogenesis appears to diminish over the lifespan of an organism. Methods to potentiate the proliferation of new neuronal or glial cells within the central nervous system from resident NSCs could have therapeutic potential following an insult, such as stroke, or to replace lost cells as a result of a neurodegenerative disease. We implanted cells from a human NSC cell line, CTX0E03, originally derived from fetal cortical tissue directly into the ventricles of aged rats. CTX0E03 cells have angiogenic properties via secretion of growth factors, so we investigated if the implanted cells would stimulate proliferation of NSCs within the subgranular zone (SGZ) of the dentate gyrus. Bromodeoxyuridine staining demonstrated significantly increased proliferation in the SGZ. Absence of double labeling for human nuclear antigen suggested that the increased proliferation was from endogenous neural progenitor cells. The acute treatment also led to an increased number of immature neurons as demonstrated by immunohistochemical staining for the immature neuronal marker doublecortin. The data suggest that implants of exogenous NSCs may promote regeneration in aging organisms through stimulation of endogenous neurogenesis.

Methodological study investigating long term laser Doppler measured cerebral blood flow changes in a permanently occluded rat stroke model.

Cerebral blood flow is impaired during middle cerebral artery occlusion in the rat model of stroke. However, the long term effects on cerebral blood flow following occlusion have received little attention. We examined cerebral blood flow in both sides at multiple time points following middle cerebral artery occlusion of the rat. The bilateral cerebral blood flow in young male Sprague Dawley rats was measured at the time of occlusion, as well as 4, 10 and 16 weeks after occlusion. Under the present experimental conditions, the difference between the left and right side's cerebral blood flow was observed to appear to switch in direction in a visual oscillatory fashion over time in the sham-treated group, whereas the occluded animals consistently showed left side dominance. One group of rats was intraparenchymally transplanted with a human neural stem cell line (CTX0E03 cells) known to have benefit in stroke models. Cerebral blood flow in the lesioned side of the cell-treated group was observed to be improved compared to the untreated rats and to demonstrate a similar oscillatory nature as that observed in sham-treated animals. These findings suggest that multiple bilateral monitoring of cerebral blood flow over time can show effects of stem cell transplantation efficiently as well as functional tests in an animal stroke model.

Mechanical forces and TGFbeta1 reduce podocyte adhesion through alpha3beta1 integrin downregulation.

BACKGROUND: Podocyturia is a marker of diabetic nephr- opathy, a possible determinant of its progression and a powerful risk factor for cardiovascular disease. A reduction in podocyte adhesion to the glomerular basement membrane (GBM) via downregulation of alpha3beta1 integrin expression, the main podocyte anchoring dimer to the GBM, may represent one of the mechanisms of podocyturia in glomerular disease. This study investigated the role of mechanical forces and transforming growth factor beta1 (TGFbeta1) in podocyte adhesion and integrin expression. METHODS: Conditionally immortalized murine podocytes were exposed to mechanical stretch and/or TGFbeta1 for 48 h. Podocyte adhesion, apoptosis and alpha3beta1 integrin expression were assessed. RESULTS: Stretch and TGFbeta1 significantly reduced podocyte adhesion and alpha3beta1 integrin expression, events paralleled by increased apoptosis. Blockade of beta1 integrin, with a specific antibody, demonstrated a reduced podocyte adhesion indicating that beta1 integrin downregulation was required for the loss of podocyte adhesion. This was linked to an increase in podocyte apoptosis. The role of apoptosis in podocyte adhesion was further investigated using caspase-3 inhibitors. Podocyte apoptosis inhibition did not affect stretch- and TGFbeta1-mediated integrin downregulation and the loss of podocyte adhesion, suggesting that alpha3beta1 integrin downregulation is sufficient to alter cell adhesion. Although stretch significantly increased podocyte TGFbeta type I, II and III receptors but not podocyte TGFbeta1 secretion, the combination of stretch and TGFbeta1 did not show any additive or synergistic effects on podocyte adhesion and alpha3beta1 integrin expression. CONCLUSIONS: These results suggest that downregulation of alpha3beta1 integrin expression, by mechanical forces or TGFbeta1, is per se sufficient to reduce podocyte adhesion. Apoptosis may represent a parallel important determinant of the podocyte loss from the GBM.

Embryonic-like stem cells from umbilical cord blood and potential for neural modeling.

Stem cells offer the distinct prospect of changing the face of human medicine. However, although they have potential to form different tissues, are still in the early stages of development as therapeutic interventions. The three most used stem cell sources are umbilical cord blood, bone marrow and human embryos. Whilst, cord blood is now used to treat over 70 disorders, at the time of writing this manuscript, not a single disease has been overcome or ameliorated using human embryonic stem cells. Advancing stem cell medicine requires ethically sound and scientifically robust models to develop tomorrow's medicines. Media attention, however, distracts from this reality; it is important to remember that stem cells are a new visitor to the medical world and require more research. Here we describe the utility of human cord blood to develop neural models that are necessary to take stem cells to the next level--into human therapies.

Colocalization analysis of sialomucins CD34 and CD164.

Flow cytometric protocols are employed to identify and characterize hemopoietic stem/progenitor populations before transplantation. Cell surface antigens, including CD34, are employed in this process and widely used in harvest protocols, which largely ignores the potential functional role of such antigens. Transmembrane glycoprotein sialomucins, including CD34 and CD164, have been implicated in cell-to-cell interactions and activation. CD164, also expressed on early hemopoietic populations, was reported to have a possible function facilitating CD34(+) cells to adhere to bone marrow stroma. In this study, we employed high-definition laser-scanning confocal microscopy to investigate CD34 and CD164 surface co-localization patterns on bone marrow and cord blood cells and to compare the expression patterns using a three-dimensional computer-generated method developed in house. Differential interference microscopy analysis revealed bone marrow membrane activity was higher than the corresponding cord blood counterpart, perhaps indicating the marrow microenvironmental nature. Fluorescence analysis of CD34 and CD164 antigens showed both were expressed first in a halo-like pattern and second in antigen-dense pockets. Three-dimensional computer analyses further revealed that this pocketing corresponded to dense crest-like surface structures appearing to rise from the point of adherence on the slide. Further, it was found that CD34 and CD164 display strong colocalization patterns on cells expressing both antigens. The dual nature of the CD34 and CD164 antigens discovered here lends further evidence to the previous literature implicating a strong functional link between these two sialomucins, which should be considered in the transplantation arena and in the function of such sialomucins as negative regulators of cell proliferation.