Relationship between soft tissue dimensions and tomographic radial root position classification system for immediate implant installation.

The aim of this study was to evaluate the relationship between soft tissue dimensions and radial root position (RRP) classification for immediate implant placement on maxillary anterior teeth. Maxillary anterior teeth (n = 420) were analyzed in the radial plane of cone beam computed tomography (CBCT) scans. Each tooth was classified according to its RRP: class I, (IA, IB); class II (IIA, IIB) class III; class IV, and class V. Soft tissue thickness at different landmarks, supracrestal soft tissue height, and crestal bone thickness were measured in CBCT. Keratinized tissue width was clinically measured. Gingival phenotype (thick or thin) was evaluated by transparency of the periodontal probe and at the landmark 2 mm from the gingival margin in CBCT. Class I tooth position accounted for 31.7%, class II for 45%, class III for 13.3%, class IV for 0.5%, and class V for 9.5%. The gingival phenotype was associated with RRP (χ2 test, p < 0.05). Soft tissue dimensions were significantly different over RRP classes (ANOVA and Tukey tests, p < 0.05). Types IA and IIA presented both thick soft and hard tissues. When planning immediate implants in the anterior maxilla, soft tissue dimensions evaluation should be incorporated into RRP classification to increase the accuracy and predictability of treatment outcomes.

Correlation of gingival stippling with periodontal phenotypical features: A cross-sectional study.

This study aimed at determining the correlation between gingival stippling (GS) and other phenotypical characteristics. Adult subjects in need of cone-beam computed tomography scans (CBCT) and comprehensive dental treatment in the maxillary anterior region were recruited. Facial gingival thickness [GT] and buccal bone thickness [BT] were assessed utilizing CBCT. Standardized intraoral photographs were obtained to determine keratinized tissue width (KTW), presence of GS in all facial and interproximal areas between the maxillary canines, and other variables of interest, such as gingival architecture (GA), tooth shape, and location. Statistical analyses to assess different correlations among recorded variables were conducted. A total of 100 participants and 600 maxillary anterior teeth constituted the study population and sample, respectively. Facial GS was observed in 56% of males and 44% of females, and it was more frequently associated with flat GA, triangular and square/tapered teeth, central incisors, and males. Greater mean values of GT, BT, and KTW were observed in facial areas that exhibited GS. Interdental GS was present in 73% of the sites and it was more frequently observed in males, the central incisor region, and when facial GS was present. Multilevel logistic regression revealed a statistically significant association between the presence of GS and KTW, BT measured at 3mm apical to the bone crest, and tooth type. This information can be used in the recognition of common periodontal phenotypical patterns associated with specific features of great clinical significance.

Relationship between supracrestal soft tissue dimensions and other periodontal phenotypic features: A cross-sectional study.

BACKGROUND: The purpose of this study was to determine the association between periodontal supracrestal soft tissue dimensions (PSSTDs) and other phenotypic features in non-molar maxillary teeth. MATERIALS AND METHODS: Adult subjects in need of comprehensive dental treatment were recruited. Periodontal phenotypic variables (i.e., facial and palatal gingival thickness [GT], alveolar bone thickness [BT], and PSSTDs, namely distance from the gingival margin to the bone crest defined as periodontal supracrestal tissue height [PSTH] and distance from the cementoenamel junction to the bone crest [CEJ-BC]) were recorded using cone-beam computed tomography scans. Standardized intraoral photographs were obtained to assess facial keratinized tissue width (KTW) and other anatomical parameters (i.e., tooth type, gingival architecture, and interproximal papilla height). RESULTS: The study sample was constituted of 87 participants that contributed with a total of 522 maxillary anterior teeth. Differences in mean values of PSSTDs, KTW, GT, and BT were observed between tooth types and sex. Males exhibited a thicker GT and BT, and taller PSTH and KTW compared to females. Shorter CEJ-BC was associated with shorter PSTH, wider KTW, and thicker GT and BT. Shorter PSTH was associated with thicker facial BT. Notably, BT and GT were positively correlated at both facial and palatal sites, meaning that the thicker the gingival phenotype, the thicker the bone morphotype. Facial BT and facial GT were positively correlated with KTW. A flat gingival architecture was associated with the thick periodontal phenotype. Square teeth had shorter CEJ-BC, wider KTW, and thicker GT. CONCLUSIONS: Periodontal phenotypic features vary across and within subjects, between facial and palatal sites at different apico-coronal levels, and as a function of sex and tooth type. The shorter the PSSTDs, the wider the KTW and the thicker the GT and BT. PSSTDs, particularly PSTH, should be considered an integral component of the periodontal phenotype.

Current landmarks for gingival thickness evaluation in maxillary anterior teeth: a systematic review.

OBJECTIVES: To identify and report the current landmarks used for measuring gingival thickness (GT) in healthy maxillary anterior teeth. MATERIAL AND METHODS: The protocol of this Preferred Reporting Items of Systematic Reviews and Meta-Analyses (PRISMA) 2020-compliant systematic review was registered in PROSPERO. A literature search was conducted to identify articles that met the eligibility criteria published up to 2022. The methods of assessing gingival thickness and the landmarks adopted on the studies were described. Primary outcomes were identified, and the frequency of reporting in the selected articles was calculated. Additionally, risk-of-bias assessments were performed for individual articles. RESULTS: Fifty-eight articles (34 with low risk of bias and 24 with medium risk of bias) were selected. A total of 3638 individuals had their gingival thickness measured. Thirty-nine different landmarks were adopted in the studies. Fifty-six articles with 22 landmarks were included in the meta-analysis. A higher heterogeneity was found between the studies (GT ranged from 0.48 to 2.59 mm, mean GT 1.074; 95% CI: 1.024-1.104). The 3 most used landmarks were 2 mm from gingival margin (10 studies, mean GT 1.170 mm, 95% CI: 1.085-1.254), bone crest (9 studies, mean GT 1.01 mm; 95% CI: 0.937-1.083), and cemento-enamel junction (7 studies, mean GT 1.172 mm; 95% CI: 1.105, 1.239). CONCLUSIONS: Within the limits of this study, a large heterogeneity in GT was found, and there was no consensus on the ideal landmark for GT measurement. CLINICAL RELEVANCE: The landmark 2 mm from gingival margin, located at attached gingiva, can be used for GT measurement by clinical and image-based devices. This is an important step for a quantitative instead of a qualitative evaluation of phenotypes.

The relationship between tomographic sagittal root position of maxillary anterior teeth and the bone housing.

STATEMENT OF PROBLEM: In a prosthetically driven treatment plan, the tomographic sagittal root position in relation to the bone housing is an important factor in the decision-making process for immediate implant placement. However, other important parameters must be considered in the bone housing of each tooth, including the alveolar ridge dimensions, the buccal and the palatal bone thickness, and the root dimensions. PURPOSE: The purpose of this clinical study was to evaluate the relationship between the sagittal root position of maxillary anterior teeth and the bone housing. MATERIALS AND METHODS: A total of 420 maxillary anterior teeth were analyzed in 70 participants. The tomographic scans were classified as sagittal root position classes I, II, III, and IV. Measurements included buccal and palatal bone thickness, alveolar ridge height, alveolar ridge width, apical bone height, root length, and root width. The Pearson correlation, ANOVA, and Tukey post hoc tests were used to determine statistically significant differences (α=0.05). RESULTS: The sagittal root position distribution was 65.2%, 9.3%, 0.7%, and 24.8% for classes I, II, III, and IV, respectively. Bone housing measurements were significantly different in relation to the 4 sagittal root position classes (P<.05), except for alveolar ridge height. Post hoc analysis showed that, in class I, buccal bone thickness and alveolar bone height were significantly low, whereas root length and palatal bone thickness were high. The higher buccal bone thickness was found in class II, and lower alveolar ridge width and palatal bone thickness in class IV. These measurements in tooth groups were also significantly different over the sagittal root position classes (P<.05). The buccal bone thickness, palatal bone thickness, and alveolar ridge width presented different levels of correlation with alveolar ridge width over the sagittal root position classes. The buccal bone thickness and palatal bone thickness were weakly correlated in class I (r=0.163) and IV (r=0.222). CONCLUSIONS: Bone housing measurements were significantly different in relation to the sagittal root position of maxillary anterior teeth.

Use of botulinum neurotoxin Type A in the management of primary bruxism in adults: An updated systematic review.

STATEMENT OF PROBLEM: The psycho-emotional effects caused by the coronavirus pandemic have increased the intensity and number of cases of bruxism, for which no treatment has been considered fully effective. Botulinum neurotoxin Type A (BoNT-A) has shown positive results as an adjunct treatment of primary bruxism; however, this off-label use does not have an established protocol, and further studies are required. PURPOSE: The purpose of this updated systematic review was to analyze the clinical outcomes of BoNT-A in the management of primary bruxism in adults. MATERIAL AND METHODS: The review was registered under the International Prospective Register of Systematic Reviews (PROSPERO) registration number CRD42021287653, without funding. PubMed, Web of Science, Scopus, LILACS, Cochrane Library, and Open Grey Literature databases were searched by using the Mendeley Desktop software program without language restrictions up to June 6, 2021. The risk of bias of the selected randomized clinical trials was assessed by using RoB2, and the level of evidence was measured by 2 independent researchers using the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) tool. RESULTS: A total of 741 references were obtained from the 6 databases in this systematic review. The 11 randomized clinical trials selected achieved a reduction in bruxism symptoms by injecting BoNT-A into 211 participants with different protocols. The heterogeneity of the included studies did not permit a meta-analysis. CONCLUSIONS: All the evaluated studies supported the effectiveness of BoNT-A injections in reducing bruxism symptoms. The reduction of symptoms can be obtained with doses lower than 25U applied exclusively in the masseter muscles.

Gingival landmarks and cutting points for gingival phenotype determination: A clinical and tomographic cross-sectional study.

BACKGROUND: This cross-sectional study assessed the role of gingival landmarks (GLs) and cutting points (CPs) for gingival phenotype (GP) determination. METHODS: Six maxillary anterior teeth (70 subjects) were evaluated using soft tissue cone-beam computed tomography (ST-CBCT). Gingival thickness was measured at different GLs: 1) tissue zone (gingival margin [GM], 1 and 2 mm apical to GM, cemento-enamel junction, above the bone crest); 2) bone zone (buccal bone crest [BBC], 1, 2, and 3 mm apical to BBC). CPs of 0.6, 0.8, 1.0, 1.2, and 1.5 mm were used to discriminate between thin and thick GP. The clinical determination of GP was made based on transparency of the periodontal probe (TRAN). RESULTS: The prevalence of thin and thick GP depended on the GL and CP. Considering the CP (1 mm), thin GP at the tissue zone ranged from 99% at the GM to 10.2% above the bone crest. In the bone zone, thick GP ranged from 28% at the BBC to 6% at 3 mm apical to the BBC. The predictability of a correct assessment of GP by TRAN compared with ST-CBCT was influenced by the GLs and CPs. A slight agreement (kappa <0.2) and low accuracy (area under the curve <0.7) were found between methods. CONCLUSIONS: The determination of thin and thick GPs is related to the gingival landmarks and CPs. Further studies are required for a well-defined treatment protocol considering different gingival landmarks in tissue and bone zones. An ST-CBCT may be useful for this purpose.

Tomographic sagittal root position in relation to maxillary anterior bone housing in a Brazilian population.

Purpose: This cross-sectional study evaluated and categorized the tomographic sagittal root position (SRP) of the maxillary anterior teeth in a Brazilian population. Materials and Methods: Cone-beam computed tomographic scans of 420 maxillary anterior teeth of 70 patients (35 men and 35 women, mean age 25.2±5.9 years) were evaluated. The SRP was classified as class I, II, III, or IV. In class I, the root is positioned against the buccal cortical plate; in class II, the root is centered in the middle of the alveolar housing; in class III, the root is positioned against the palatal cortical plate; and in class IV, at least two-thirds of the root engage both the buccal and palatal cortical plates. Results: In total, 274 teeth (65.2%) were class I, 39 (9.3%) were class II, 3 (0.7%) were class III, and 104 (24.8%) were class IV. The frequency distribution over the teeth groups was different from the overall analysis. Important differences were found in the frequencies of classes I, II, and IV compared to other populations. Sex was not associated with the SRP classes (P=0.307). Age distribution was significantly different over the classes (P=0.004). Conclusion: The findings of this study on the distribution of SRP classes among the Brazilian population compared to other populations demonstrate that the SRP should be analyzed on a case-by-case basis for an accurate treatment plan in the maxillary anterior area.

Micro-tomographic analysis of the root trunk and pre-furcation area of the first mandibular molars.

This study analyzed the root trunk (RT) and the pre-furcation area (PFA) of mandibular first molars. Thirty lower first mandibular molars extracted due to advanced periodontal disease were evaluated in a high-energy spiral computerized micro-tomography. Two gutta-percha markings on the cementoenamel junction (CEJ) and at the furcation entrance (FE) at buccal and lingual surfaces served as reference points for measurements of RT length, and PFA width and depth, at the levels of CEJ, 1 mm apical to CEJ, 2 mm apical to CEJ, and at the FE. The mean RT length was 2.49 mm at buccal and 3.18 mm at lingual sides. The mean widths of the PFA at CEJ, at 1 and 2 mm apical to CEJ, and at FE were 2.9, 3.4, 3.9 and 4.3 mm, respectively, while the mean depths were 0.19, 0.32, 0.57 and 1.1 mm, respectively. The PFA coincided with CEJ in 10 buccal and 10 lingual surfaces, representing 33.33% of the sample. There was a negative correlation between RT length and PFA dimensions. This study concludes that the RT length was smaller than previous studies. From the CEJ up to the furcation entrance, the PFA showed a progressive increase in width and depth. The coincidence of the PFA area beginning at the CEJ in 1/3, and the negative correlation between RT length and PFA dimensions may represent greater risk factor for the early development of furcation lesions.

Clinical outcomes of botulinum toxin type A injections in the management of primary bruxism in adults: A systematic review.

STATEMENT OF PROBLEM: Botulinum toxin has been used for various therapeutic and esthetic purposes for nearly 4 decades and has shown positive outcomes in patients with bruxism. However, the effectiveness of botulinum toxin injections as an alternative to traditional therapies in the management of primary bruxism is still unclear. PURPOSE: The purpose of this systematic review was to analyze the clinical outcomes of the use of botulinum toxin type A injections in the management of primary bruxism in adults. MATERIAL AND METHODS: Databases such as PubMed, Web of Science, Scopus, LILIACS, Cochrane Library, and Open Grey Literature were searched without language or date restrictions until October 6, 2019. Using Mendeley Desktop software to organize the references, 2 independent researchers selected the published clinical studies (Study type) on the improvement of symptoms (Outcome) in human adults with primary bruxism (Participants/Population) who received botulinum toxin type A injections (Intervention), placebo injections, saline injections, no injections, or other treatments (Comparator(s)/Control) for the management of bruxism. RESULTS: A total of 601 references were initially obtained from the 6 databases. Six randomized clinical trials and 4 case series were selected and critically appraised according to the Fowkes and Fulton guidelines. Heterogeneity among the studies did not allow for a meta-analysis. All studies supported the efficacy and safety of botulinum toxin injections in reducing the symptoms of primary bruxism. CONCLUSIONS: Botulinum toxin type A injections are effective in the treatment of the symptoms of primary bruxism in adults. Randomized clinical trials are still needed to establish a protocol for using botulinum toxin as an alternative to traditional therapies in the management of primary bruxism.

Systematic review of the effect of probiotics on experimental gingivitis in humans.

Probiotic therapy is a viable alternative to chlorhexidine, a widely used antiseptic in dentistry that produces significant adverse effects. This systematic review aimed to analyze the effects of probiotics on experimental gingivitis in humans. Two independent reviewers conducted a comprehensive literature search until March 2019. Randomized clinical trials and controlled clinical trials were selected. Outcome data were extracted and critically analyzed. A total of five articles were included in the qualitative synthesis. No meta-analysis could be conducted due to the heterogeneity of the selected studies. The use of probiotics showed a slight improvement in clinical parameters. Changes in gingival crevicular fluid volume were lower in the presence of the probiotic than in the placebo group. All the studies showed that the immediate, positive effects of probiotics during the period of discontinued mechanical oral hygiene were due to the modulation of the host response, not the anti-plaque effect. Investigators should conduct randomized clinical trials to elucidate the mechanisms of probiotic action and develop improved delivery systems.

Evaluation of the zone of keratinized tissue using exposed acellular dermal matrix over tooth extraction sites: a randomized controlled clinical trial.

BACKGROUND: The presence of an adequate zone of keratinized tissue has been associated with implant health. This study evaluated the zone of keratinized tissue using exposed acellular dermal matrix (ADM) over extraction sites. MATERIAL AND METHODS: Fifteen sites received ADM, and fifteen control sites received no biomaterial. All sites were sutured with no attempt to achieve primary closure. Initial measurements of buccal and lingual keratinized tissue were taken from the mucogingival line (MGL) to the most coronal gingival margins. Final measurements were taken from the buccal MGL to the lingual MGL 90 days after surgery. Gingival biopsies were taken before implant placement. RESULTS: Test and control groups exhibited a mean value of 4.40 ± 1.45 mm and 1.40 ± 1.40 mm, respectively. The newly formed tissue revealed similar histological aspect of normal keratinized tissue. CONCLUSION: Exposed ADM used over tooth extraction sockets can predictably be used to increase the zone of keratinized tissue.

Uma discussão sobre o efeito da rhBMP-2 no aumento ósseo alveolar / A discussion on the effect of rhBMP-2 in the alveolar bone augmentation

O objetivo deste trabalho foi apresentar uma revisão da literatura sobre a proteína óssea morfogenética tipo 2 (BMP-2) e seu efeito no aumento ósseo alveolar. A proteína óssea morfogenética (BMP) foi identificada, em 1965, por um norte-americano chamado Marshal Urist, que mostrou que essa proteína, extraída da cortical óssea bovina, poderia induzir a formação de novo osso quando implantada em locais não ósseos. Atualmente, muitos trabalhos têm estudado a regeneração óssea através do uso de BMPs em substituição aos enxertos ósseos. O presente estudo conclui que a proteína óssea morfogenética é capaz de induzir neoformação óssea de maneira eficaz, tornando-se uma alternativa na substituição dos enxertos ósseos e a necessidade da descoberta de novos carreadores facilitando a estabilidade mecânica da BMP-2 no leito receptor.

The aim of this paper is to review the literature about bone morphogenetic protein type 2 (BMP-2) and on the effect in the alveolar bone augmentation. In 1965, the BMP was isolated by Marshal Urist, who showed that this protein extracted from bone narrow could induce bone neoformation when implanted in sites without bone cells. Recently, a lot of studies have been looking for bone regeneration using BMPs without bone grafts. The present study it was concluded that the bone morphogenetic protein induces bone neoformation, being an alternative as a substitute to bone grafts and that new carrier discovery is necessary to smooth stability of this carriers in receptor site.

Biometric study of the prefurcation area of human mandibular first molars.

This study analyzed the length of the root trunk (RT) as well as the width and depth of the prefurcation area (PFA) of human mandibular first molars. Ninety-six human mandibular first molars that were extracted after being observed to be in poor condition both clinically and radiographically were used in this study. A contour-measuring instrument was used, and profiles of the buccal and lingual root surfaces of these teeth were traced on a millimeter-scaled paper. The profiles were recorded from the cementoenamel junction, millimeter by millimeter, up to the entrance of the furcation of each tooth. The width and depth of the PFA as well as the length of the RT were studied. After statistical analysis it was concluded that the mean widths of the PFA on the buccal and lingual surfaces were 3.68 ± 0.66 and 3.48 ± 0.51 mm, respectively; mean depths of the PFA on the buccal and lingual surfaces were 0.89 ± 0.42 and 0.82 ± 0.28 mm, respectively; and mean lengths of the RT on the buccal and lingual surfaces were 3.07 ± 0.82 and 3.54 ± 0.73 mm. Of the samples, the lengths of the RT and the PFA were coincident in 39.58% on the buccal surface and in 46.87% on the lingual surface. There is a concavity (PFA) in the RT region of all mandibular first molars, showing larger width and depth on the buccal surface. The RT was longer on the lingual surface in comparison with the buccal surface.

Guidelines for positioning external hexagon implants in screw-retained multiple prostheses using rotational abutment-type components.

PURPOSE: This study measured the maximum angulation between 2 implants allowed by the internal walls of the component in screw-retained multiple prostheses using rotational abutment-type components. MATERIALS AND METHODS: Thirty specimens of 3 different brands (Conexão; Neodent; and SIN), consisting of titanium rotational abutments connected to external hexagon abutment analogs with standard platforms, were divided into 3 groups. The specimens were internally filled with polyester resin, screw retained, torque, and sectioned to assess the space existing between the internal wall of the rotational abutment component, edge, and vertex of the hexagon. The measurements were performed using 3-dimensional equipment. RESULTS: When the implant hexagons were oriented edge-to-edge, groups 1, 2, and 3 presented 40.75, 45.00, and 31.89 degrees, respectively. Vertex-to-vertex hexagon orientation showed 9.79, 18.18, and 3.27 degrees for groups 1, 2, and 3, respectively. CONCLUSIONS: The maximum mean angulation in the mesio/distal direction between the 2 implants with hexagon-oriented vertex-to-vertex is 10.41 degrees, and hexagon-oriented edge-to-edge is 39.54 degrees. This study suggests guidelines for positioning external hexagon implants for interference-free screw-retained multiple prostheses using rotational abutment-type components.

Evaluation of a dense polytetrafluoroethylene membrane to increase keratinized tissue: a randomized controlled clinical trial.

BACKGROUND: The presence of an adequate zone of keratinized tissue has been associated with implant health. This study evaluated the increasing of the zone of keratinized tissue using dense polytetrafluoroethylene (d-PTFE) membranes over extraction sites, without primary closure. MATERIALS AND METHODS: Fifteen sites received d-PTFE membranes. The control sites received no membranes. All cases were sutured with no attempt to achieve primary closure. Before surgery, initial measurements of buccal and lingual keratinized tissue were taken from the mucogingival line (MGL) to the most coronal gingival margins. Final measurements were taken from the buccal MGL to the lingual MGL, 60 and 90 days after extractions. RESULTS: In the test group, a mean increase in the zone of keratinized tissue of 7.06 ± 2.63 mm and 6.6 ± 2.84 mm was observed in 60 and 90 days, respectively. In the control group, a mean increase of 2.46 ± 1.59 mm and 1.40 ± 1.40 mm was observed in 60 and 90 days, respectively. CONCLUSION: Nonexpanded d-PTFE membranes can predictably be used to increase the zone of keratinized tissue in preparation to implant placement.

Supracrestal gingival tissue measurement in normal periodontium: a human histometric study.

Twenty-four teeth were extracted en bloc with the marginal periodontal structures and processed for histologic purposes. Measurements were taken from the top of the gingival margin to the apical limit of the junctional epithelium (GM-JE), from the apical limit of the junctional epithelium to the top of the alveolar bone crest (JE-AB), and from the top of the gingival margin to the top of the alveolar bone crest (GM-AB). Data were histometrically analyzed. This first clinical human study demonstrated mean measurements of 1.58 ± 0.41 mm for GM-JE, 1.18 ± 0.42 mm for JE-AB, and 2.75 ± 0.59 mm for GM-AB.

Localização da margem dos preparos em restaurações estéticas: uma discussão em relação à saúde periodontal / Location of the final preparation in aesthetic restorations: a discussion related to periodontal health

Devido às necessidades estéticas muitas restaurações apresentam margens com extensões subgengivais. Porém, para a execução de um trabalho estético, uma série de fatores deve ser considerada não só com a finalidade de se obter a beleza estética, mas também a saúde dos tecidos de suporte envolvidos. O objetivo deste trabalho foi discutir a relação entre a localização da margem dos preparos em restaurações estéticas e a resposta dos tecidos periodontais. A metodologia utilizada foi a avaliação de artigos pertinentes selecionados a partir da base de dados PubMed, além da pesquisa manual. Após a análise dos artigos, concluiu-se que: a) a margem supragengival é a melhor localização em termos de saúde periodontal; b) restaurações com margens subgengivais provocam danos aos tecidos periodontais; c) pacientes com higiene bucal adequada não mostram redução nos danos periodontais causados por restaurações com margens subgengivais; d) a localização da margem dos preparos em restaurações estéticas pode ser estendida subgengivalmente, desde que as medidas do tecido gengival supracrestal sejam verificadas e respeitadas contra lateral e individualmente.

Due to the needs of aesthetic, many restorations have margins with subgingival extensions. However, in order to perform an aesthetic work, a number of factors should be considered not only for the purpose of obtaining the aesthetic beauty but also the health of the supportive tissues. The objective of this work was to discuss the relationship between the location of the preparation margins and periodontal tissue response in aesthetic restorations. The methodology used was the evaluation of relevant articles selected from the PubMed database, in addition to the manual search. After examining the articles it could be concluded that: 1 - the supragengival margin is the best location in terms of periodontal health, 2 - restorations with subgengival margins caused damage to the periodontium, 3 - patients with proper oral hygiene did not show reduction in periodontal damage caused by restorations with subgengival margins; 4 - The location of the preparation margins in aesthetic restorations may be extended subgingivally, provided that the supracrestal gingival tissue measurements are verified and respected contralaterally and individually.

Interleukins 1ß and 10 expressions in the periimplant crevicular fluid from patients with untreated periimplant disease.

PURPOSE: To analyze the interleukin (IL)-1ß and IL-10 expressions in periimplant crevicular fluid (PICF) in healthy and diseased regions to elucidate the inflammatory process around implants and its influence on clinical diagnosis. MATERIALS AND METHODS: PICF samples from 30 patients were analyzed for IL-1ß and IL-10 concentrations by enzyme-linked immunosorbent assay. Patients were divided in Groups A (health), B (mucositis), and C (periimplantitis). Plaque accumulation, periodontal phenotype (PP), depth on probing, and history of periodontitis (HP) were evaluated. RESULTS: IL-1ß levels were lower in healthy group compared with Groups B (P < 0.0005) and C (P < 0.001). IL-10 levels were higher in Groups A compared with B (P = 0.033) and C (P = 0.0001). Patients with HP and thin PP had 9 and 4.5 times more chance of presenting disease, respectively. CONCLUSIONS: Lower IL-1ß and higher IL-10 levels characterized healthy periimplant conditions, which demonstrate the anti-inflammatory predominance in sites without disease signs. IL-10 levels decrease significantly according to increase of disease status. Therefore, its levels can differentiate healthy, mucositis, and periimplantitis. Thin PP and HP are associated with periimplant disease. These findings suggest the use of ILs as a biochemical marker for early diagnosis of periimplant disease.

Identification of periodontal pathogens in healthy periimplant sites.

PURPOSE: : The aim of this study was to evaluate the presence of periodontopathogens in subgingival periimplant sites in partially edentulous patients using polymerase chain reaction procedures, with regard to areas with clinical and radiographic signs of health and areas presenting periimplant disease. MATERIALS AND METHODS: : Thirty nonsmoking, partially edentulous patients, aged 30 to 76 years, were included in this study and divided in 3 groups according their clinical and radiographic characteristics. Group A (n = 10) presented periimplant health, group B (n = 10) presented periimplant mucositis, and group C (n = 10) were patients with periimplantitis. Periimplant tissues were clinically examined as regards the color of mucosae, presence of bacterial plaque, depth and bleeding on probing, and local suppuration. History of periodontal disease was also considered. Radiographic analysis evaluated the presence of bone loss around the implant. Samples of periimplant crevicular fluid were collected to analyze the presence of periodontal pathogens, Actinobacillus actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Prevotella intermedia (Pi), Tannerella forsythensis (Tf), and Treponema denticola (Td). RESULTS: : The results showed that the history of periodontal disease is associated with periimplant disease. The bacteria Aa, Pg, Pi, Td, and Tf were present in periimplant sites clinically and radiographically characterized, as healthy periimplant tissues, mucositis, and periimplantitis. CONCLUSIONS: : We concluded that Aa, Pg, Pi, Td, and Tf are present in healthy and diseased conditions. Therefore, these periodontal pathogens are not strictly related to periimplant disease sites.