Application of Artificial Neural Networks for Prediction of Received Signal Strength Indication and Signal-to-Noise Ratio in Amazonian Wooded Environments.

The presence of green areas in urbanized cities is crucial to reduce the negative impacts of urbanization. However, these areas can influence the signal quality of IoT devices that use wireless communication, such as LoRa technology. Vegetation attenuates electromagnetic waves, interfering with the data transmission between IoT devices, resulting in the need for signal propagation modeling, which considers the effect of vegetation on its propagation. In this context, this research was conducted at the Federal University of Pará, using measurements in a wooded environment composed of the Pau-Mulato species, typical of the Amazon. Two machine learning-based propagation models, GRNN and MLPNN, were developed to consider the effect of Amazonian trees on propagation, analyzing different factors, such as the transmitter's height relative to the trunk, the beginning of foliage, and the middle of the tree canopy, as well as the LoRa spreading factor (SF) 12, and the co-polarization of the transmitter and receiver antennas. The proposed models demonstrated higher accuracy, achieving values of root mean square error (RMSE) of 3.86 dB and standard deviation (SD) of 3.8614 dB, respectively, compared to existing empirical models like CI, FI, Early ITU-R, COST235, Weissberger, and FITU-R. The significance of this study lies in its potential to boost wireless communications in wooded environments. Furthermore, this research contributes to enhancing more efficient and robust LoRa networks for applications in agriculture, environmental monitoring, and smart urban infrastructure.

LoRa Technology Propagation Models for IoT Network Planning in the Amazon Regions.

Designing and deploying telecommunications and broadcasting networks in the challenging terrain of the Amazon region pose significant obstacles due to its unique morphological characteristics. Within low-power wide-area networks (LPWANs), this research study introduces a comprehensive approach to modeling large-scale propagation loss channels specific to the LoRaWAN protocol operating at 915 MHz. The objective of this study is to facilitate the planning of Internet of Things (IoT) networks in riverside communities while accounting for the mobility of end nodes. We conducted extensive measurement campaigns along the banks of Universidade Federal do Pará, capturing received signal strength indication (RSSI), signal-to-noise ratio (SNR), and geolocated point data across various spreading factors. We fitted the empirical close-in (CI) and floating intercept (FI) propagation models for uplink path loss prediction and compared them with the Okumura-Hata model. We also present a new model for path loss with dense vegetation. Furthermore, we calculated received packet rate statistics between communication links to assess channel quality for the LoRa physical layer (PHY). Remarkably, both CI and FI models exhibited similar behaviors, with the newly proposed model demonstrating enhanced accuracy in estimating radio loss within densely vegetated scenarios, boasting lower root mean square error (RMSE) values than the Okumura-Hata model, particularly for spreading factor 9 (SF9). The radius coverage threshold, accounting for node mobility, was 945 m. This comprehensive analysis contributes valuable insights for the effective deployment and optimization of LoRa-based IoT networks in the intricate environmental conditions of the Amazon region.

Methodology for LoRa Gateway Placement Based on Bio-Inspired Algorithmsfor a Smart Campus in Wooded Area.

The Internet of Things (IoT) device scenario has several emerging technologies. Among them, Low-Power Wide-Area Networks (LPWANs) have proven to be efficient connections for smart devices. These devices communicate through gateways that exchange points with the central server. This study proposes an empirical and statistical methodology based on measurements carried out in a typical scenario of Amazonian cities composed of forests and buildings on the Campus of the Federal University of Pará (UFPA) to apply an adjustment to the coefficients in the UFPA propagation model. Furthermore, an Evolutionary Particle Swarm Optimization (EPSO) metaheuristic with multi-objective optimization was applied to maximize the coverage area and minimize the number of gateways to assist in the planning of a LoRa network. The results of simulations using the Monte Carlo method show that the EPSO-based gateway placement optimization methodology can be used to plan future LPWAN networks. As reception sensitivity is a decisive factor in the coverage area, with -108 dBm, the optimal solution determined the use of three gateways to cover the smart campus area.

SNR Prediction with ANN for UAV Applications in IoT Networks Based on Measurements.

The 5G deployment brings forth the usage of Unmanned Aerial Vehicles (UAV) to assist wireless networks by providing improved signal coverage, acting as relays or base-stations. Another technology that could help achieve 5G massive machine-type communications (mMtc) goals is the Long Range Wide-Area Network (LoRaWAN) communication protocol. This paper studied these complementary technologies, LoRa and UAV, through measurement campaigns in suburban, densely forested environments. Downlink and uplink communication at different heights and spreading factors (SF) demonstrate distinct behavior through our analysis. Moreover, a neural network was trained to predict the measured signal-to-noise ratio (SNR) behavior and results compared with SNR regression models. For the downlink scenario, the neural network results show a root mean square error (RMSE) variation between 1.2322-1.6623 dB, with an error standard deviation (SD) less than 1.6730 dB. For the uplink, the RMSE variation was between 0.8714-1.3891 dB, with an error SD less than 1.1706 dB.