Elimination of Dirofilaria immitis Infection in Dogs, Linosa Island, Italy, 2020-2022.

On Linosa Island, Italy, Dirofilaria immitis infection has been hyperendemic in dogs and seroprevalent among islanders. In 2020, we implemented a heartworm disease elimination program on Linosa Island. Of 54 dogs tested for D. immitis antigen and microfilariae, 28 had positive results and received treatment with oral doxycycline twice daily for 4 weeks plus topical imidacloprid/moxidectin monthly for 12 months. The 26 dogs with negative results received monthly topical imidacloprid/moxidectin as preventive. During month 1, the number of microfilaremic dogs was reduced by 76.5%. From month 2 on, all animals were microfilariae negative, and during months 3 to 9, the number of antigen-positive dogs decreased progressively. Treatment of positive dogs coupled with chemoprophylaxis for noninfected dogs was effective, protecting them from new infections. The elimination program reduced the risk for human infection, representing a One Health paradigm. Monitoring and chemoprophylaxis are advocated to maintain the status of heartworm disease-free area.

Clinical, Radiological, and Echocardiographic Findings in Cats Infected by Aelurostrongylus abstrusus.

Cats infected by Aelurostrongylus abstrusus may show a plethora of clinical signs, and pulmonary hypertension (PH) seems to be one of the possible alterations induced by the infection; however, data on this association are scant and contradictory. Therefore, the aims of this study were to investigate the association between aelurostrongylosis and PH and to evaluate the correlation between the number of A. abstrusus larvae expelled in the faeces and the clinical, echocardiographic, and radiological alterations. Fifteen cats (i.e., eight males and seven females) older than 3 months and naturally infected by A. abstrusus with different parasitic loads, expressed as larvae per grams of faeces (l.p.g.), were enrolled in the study. Each animal underwent clinical, echocardiographic, and radiographic examinations. Most cats (i.e., 10/15) showed pathological patterns on thoracic radiograms; particularly, the alveolar pattern (four cats), interstitial-nodular pattern (five cats), and bronchial pattern (one cat). No significant echocardiographic findings of PH were detected. No correlation between the number of l.p.g. and the severity of clinical signs was observed, but a significant correlation with activated partial thromboplastin time (aPTT), radiographic alterations (interstitial nodular pattern), and ultrasonographic findings (RIVIDs) were noticed. These findings suggest that other factors such as animal age and health status, as well as comorbidity, may influence the presentation of the disease or the clinical manifestation and severity of the disease.

Right Pulmonary Artery Distensibility Index in Heartworm Infected Dogs: Are the Different Methods Leading to Same Results?

Canine Heartworm Disease (HWD) is mainly a pulmonary vascular disease. The reduction of the Pulmonary Artery Distensibility (PAD) is an early index of pulmonary vascular disease. Echocardiographic evaluation of the Right Pulmonary Artery Distensibility index (RPADi) is calculated as the percentage change in diameter of the right pulmonary artery (RPA) between systole and diastole. Historically, two main methods have been used for RPADi calculation: The Venco method and Visser method; however, different hybrid methods have also been used by other authors. Therefore, it could be difficult for a clinician to decide which method to apply and how to interpret the results based on the reference values reported. The aim of this study was to compare the RPADi obtained by five different techniques (Venco classic, Venco modified, Visser classic, Visser modified 1, and Visser modified 2). The study design was a retrospective, single center, observational study. Forty-seven client-owned dogs were included. The measurements were performed off-line as an average of three consecutive cardiac cycles by a single investigator blinded to the dogs' diagnosis. The RPADi was satisfactorily obtained by all methods in all dogs. Intra-observer measurement variability was clinically acceptable both for systolic and diastolic measurements. Although the Bland-Altman test showed a statistical agreement between the various methods used to calculate the RPADi, these methods cannot be used interchangeably in a clinical setting. Instead, the measurement method and reference values should always be specified.

Post-traumatic intra-orbital meningoencephalocele in adults: technical note on a rare entity and review of the literature.

Post-traumatic orbital meningoencephaloceles related to orbital roof fractures are a challenging clinical entity because of their rarity and difficult differential diagnosis. We report a case of post-traumatic intra-orbital meningoencephalocele in a 69-year-old man, secondary to a likely trapdoor mechanism, treated with a modified one-piece orbitozygomatic craniotomy. We also performed an extensive literature review of traumatic Intra-Orbital Encephalocele related to Orbital Roof Fracture focused on adult patients on electronic databases including Scopus, MEDLINE/PubMed, and Google Scholar. Patient well recovered after surgery with immediate exophthalmos resolution and discharged without visual or neurological deficits. The literature review included 22 papers with a total of 28 patients: 22 males (78.6%) and 6 females (21.4%), with a median age of 34.7 years. Twenty-six patients (92.9%) reported ocular injuries, with associated intracranial complications in 16 cases (61.5%). Twenty-seven patients (96.4%) were surgically treated, 18 of those underwent unilateral or bilateral frontal approach. Most orbital roof fractures can be managed nanoperatively if asymptomatic. Indeed, when the intra-orbital volume decreases, for example due to an encephalocele, the intra-orbital pressure could increase and determine an orbital compartment syndrome. In our case, we performed a one-piece modified orbitozygomatic approach, which has several advantages in comparison to the frequent unilateral or bilateral frontal craniotomy like the better exposure of the brain and orbit and a minimum brain retraction.

Performance Comparison of Polymeric and Silica-Based Multi-Bed Pervaporation Membrane Reactors during Ethyl Levulinate Production.

A detailed numerical study of ethyl levulinate (EtLA) production with levulinic acid (LA) and ethanol (Et) in a multi-bed traditional reactor (MB-TR) and a silica-based and polymeric multi-bed pervaporation membrane reactors (MB-PVMR) was conducted and the efficiency of each design was studied under different operation conditions. Due to water production in the EtLA production process, water removal by a pervaporation system may improve process performance. Our results showed that MB-PVMR had higher performance compared with MB-TR. In addition, the silica membrane was more effective in water removal compared with the polymeric membrane. Therefore, higher LA conversion was achievable by a silica-based multi-bed pervaporation membrane reactor (SMB-PVMR). All the results were evaluated for percentage of water removal and LA conversion, based on variations in the Et/LA molar ratio, feed molar flow, reaction zone temperature, and catalyst loading. The results showed that water removal was higher than 95% and LA conversion of about 95% was attained by SMB-PVMR.

The pesticide fate tool for groundwater vulnerability assessment within the geospatial decision support system LandSupport.

The protection of groundwater resources from non-point-source pollutants, such as those coming from agricultural practices, is the focus of several European Directives, including the Water Framework Directive and the Pesticide Directive. Besides the environmental goals to be reached by the single EU member state, these directives clearly underline the role of experts in supporting planners and public authorities to fulfil these objectives. This work presents a new web-based, freely-available dynamical tool, named the pesticide fate tool, developed within the geospatial Decision Support system (DSS), LandSupport, for the assessment of groundwater vulnerability, specific for type of pollutant. The tool is based on the extended transfer function model, specifically expanded to consider the transport of reactive solutes, such as pesticides. The work describes the tool implementation for three case studies, with different spatial scales and pedo-climatic conditions: Valle Telesina, IT, Marchfeld, AT, and Zala County, HU. Principal inputs of the tool are: soil physical and hydrological properties, climate, groundwater table depth, type of crops and related pesticides. Results of the model are shown through the LandSupport GUI both as coloured maps, representing the relative concentration of pesticide at the arrival to the water table at the end of the simulation period, and as cumulative charts of the solute arrival at the depth of interest. The three case studies are shown as examples of application of the LandSupport DSS in supporting the Water and Pesticides directives, demonstrating that it represents a valuable instrument for public authorities, environmental planners, as well as agricultural extension services. For example, large differences are shown by soils in filtering the tetraconazole (99.9% vs 76%), a fungicide used in viticulture, or different percentage of arrival (0.32% and 0,01%) to the groundwater table are shown for two herbicides (Tribenuron and Florasulam) largely used to control annual dicotyledonous weeds.

An On-Board Pure H2 Supply System Based on A Membrane Reactor for A Fuel Cell Vehicle: A Theoretical Study.

In this novel conceptual fuel cell vehicle (FCV), an on-board CH4 steam reforming (MSR) membrane reformer (MR) is considered to generate pure H2 for supplying a Fuel Cell (FC) system, as an alternative to the conventional automobile engines. Two on-board tanks are forecast to store CH4 and water, useful for feeding both a combustion chamber (designed to provide the heat required by the system) and a multi tubes Pd-Ag MR useful to generate pure H2 via methane steam reforming (MSR) reaction. The pure H2 stream is hence supplied to the FC. The flue gas stream coming out from the combustion chamber is used to preheat the MR feed stream by two heat exchangers and one evaporator. Then, this theoretical work demonstrates by a 1-D model the feasibility of the MR based system in order to generate 5 kg/day of pure H2 required by the FC system for cruising a vehicle for around 500 km. The calculated CH4 and water consumptions were 50 and 70 kg, respectively, per 1 kg of pure H2. The on-board MR based FCV presents lower CO2 emission rates than a conventional gasoline-powered vehicle, also resulting in a more environmentally friendly solution.

Study on the Separation of H2 from CO2 Using a ZIF-8 Membrane by Molecular Simulation and Maxwell-Stefan Model.

The purification of H2-rich streams using membranes represents an important separation process, particularly important in the viewpoint of pre-combustion CO2 capture. In this study, the separation of H2 from a mixture containing H2 and CO2 using a zeolitic imidazolate framework (ZIF)-8 membrane is proposed from a theoretical point of view. For this purpose, the adsorption and diffusion coefficients of H2 and CO2 were considered by molecular simulation. The adsorption of these gases followed the Langmuir model, and the diffusion coefficient of H2 was much higher than that of CO2. Then, using the Maxwell-Stefan model, the H2 and CO2 permeances and H2/CO2 permselectivities in the H2-CO2 mixtures were evaluated. Despite the fact that adsorption of CO2 was higher than H2, owing to the simultaneous interference of adsorption and diffusion processes in the membrane, H2 permeation was more pronounced than CO2. The modeling results showed that, for a ZIF-8 membrane, the H2/CO2 permselectivity for the H2-CO2 binary mixture 80/20 ranges between 28 and 32 at ambient temperature.

Advances in Methanol Production and Utilization, with Particular Emphasis toward Hydrogen Generation via Membrane Reactor Technology.

Methanol is currently considered one of the most useful chemical products and is a promising building block for obtaining more complex chemical compounds, such as acetic acid, methyl tertiary butyl ether, dimethyl ether, methylamine, etc. Methanol is the simplest alcohol, appearing as a colorless liquid and with a distinctive smell, and can be produced by converting CO2 and H2, with the further benefit of significantly reducing CO2 emissions in the atmosphere. Indeed, methanol synthesis currently represents the second largest source of hydrogen consumption after ammonia production. Furthermore, a wide range of literature is focused on methanol utilization as a convenient energy carrier for hydrogen production via steam and autothermal reforming, partial oxidation, methanol decomposition, or methanol⁻water electrolysis reactions. Last but not least, methanol supply for direct methanol fuel cells is a well-established technology for power production. The aim of this work is to propose an overview on the commonly used feedstocks (natural gas, CO2, or char/biomass) and methanol production processes (from BASF-Badische Anilin und Soda Fabrik, to ICI-Imperial Chemical Industries process), as well as on membrane reactor technology utilization for generating high grade hydrogen from the catalytic conversion of methanol, reviewing the most updated state of the art in this field.

Progress in Methanol Steam Reforming Modelling via Membrane Reactors Technology.

Hydrogen has attracted growing attention for various uses, and, particularly, for polymer electrolyte membrane fuel cells (PEMFCs) supply. However, PEMFCs need high grade hydrogen, which is difficult in storing and transportation. To solve these issues, hydrogen generation from alcohols and hydrocarbons steam reforming reaction has gained great consideration. Among the various renewable fuels, methanol is an interesting hydrogen source because at room temperature it is liquid, and then, easy to handle and to store. Furthermore, it shows a relatively high H/C ratio and low reforming temperature, ranging from 200 to 300 °C. In the field of hydrogen generation from methanol steam reforming reaction, a consistent literature is noticeable. Despite various reviews that are more devoted to describe from an experimental point of view the state of the art about methanol steam reforming reaction carried in conventional and membrane reactors, this work describes the progress in the last two decades about the modelling studies on the same reaction in membrane reactors.

Glycerol Production and Transformation: A Critical Review with Particular Emphasis on Glycerol Reforming Reaction for Producing Hydrogen in Conventional and Membrane Reactors.

Glycerol represents an emerging renewable bio-derived feedstock, which could be used as a source for producing hydrogen through steam reforming reaction. In this review, the state-of-the-art about glycerol production processes is reviewed, with particular focus on glycerol reforming reactions and on the main catalysts under development. Furthermore, the use of membrane catalytic reactors instead of conventional reactors for steam reforming is discussed. Finally, the review describes the utilization of the Pd-based membrane reactor technology, pointing out the ability of these alternative fuel processors to simultaneously extract high purity hydrogen and enhance the whole performances of the reaction system in terms of glycerol conversion and hydrogen yield.

Supported Pd-Au Membrane Reactor for Hydrogen Production: Membrane Preparation, Characterization and Testing.

A supported Pd-Au (Au 7wt%) membrane was produced by electroless plating deposition. Permeation tests were performed with pure gas (H2, H2, N2, CO2, CH4) for long time operation. After around 400 h under testing, the composite Pd-Au membrane achieved steady state condition, with an H2/N2 ideal selectivity of around 500 at 420 °C and 50 kPa as transmembrane pressure, remaining stable up to 1100 h under operation. Afterwards, the membrane was allocated in a membrane reactor module for methane steam reforming reaction tests. As a preliminary application, at 420 °C, 300 kPa of reaction pressure, space velocity of 4100 h(-1), 40% methane conversion and 35% hydrogen recovery were reached using a commercial Ni/Al2O3 catalyst. Unfortunately, a severe coke deposition affected irreversibly the composite membrane, determining the loss of the hydrogen permeation characteristics of the supported Pd-Au membrane.

Performance and Long-Term Stability of Pd/PSS and Pd/Al2O3 Membranes for Hydrogen Separation.

The present work is focused on the investigation of the performance and long-term stability of two composite palladium membranes under different operating conditions. One membrane (Pd/porous stainless steel (PSS)) is characterized by a ~10 µm-thick palladium layer on a porous stainless steel substrate, which is pretreated by means of surface modification and oxidation; the other membrane (Pd/Al2O3) is constituted by a ~7 µm-thick palladium layer on an asymmetric microporous Al2O3 substrate. The operating temperature and pressure ranges, used for studying the performance of these two kinds of membranes, are 350-450 °C and 200-800 kPa, respectively. The H2 permeances and the H2/N2 selectivities of both membranes were investigated and compared with literature data. At 400 °C and 200 kPa as pressure difference, Pd/PSS and Pd/Al2O3 membranes exhibited an H2/N2 ideal selectivity equal to 11700 and 6200, respectively, showing stability for 600 h. Thereafter, H2/N2 selectivity of both membranes progressively decreased and after around 2000 h, dropped dramatically to 55 and 310 for the Pd/PSS and Pd/Al2O3 membranes, respectively. As evidenced by Scanning Electron Microscope (SEM) analyses, the pinholes appear on the whole surface of the Pd/PSS membrane and this is probably due to release of sulphur from the graphite seal rings.

[Choice of the imaging technique for the diagnosis of bone metastases]. / Scelta della tecnica di imaging nello studio delle metastasi ossee.

Bone is the third common site of distant metastases in cancer patients. Bone metastases may have implications for prognosis, quality of life, and local and systemic therapy. Numerous imaging modalities may be used to detect bone metastases. The two main anatomical modalities are computed tomography (CT) and magnetic resonance imaging (MRI), with many variants proposed for the MRI procedure, including diffusion-weighted imaging. The two main functional modalities are scintigraphy and PET/CT, also with many variants in the radiopharmaceuticals. Aim of our paper is to review the most important radio-compounds that can be successfully used to detect and/or characterize bone metastases.

Magnetic resonance imaging in the evaluation of anatomical risk factors for pediatric obstructive sleep apnoea-hypopnoea: a pilot study.

OBJECTIVE: Aim of our study was to identify anatomical risk factors involved in the development of pediatric OSAHS through a MRI-based case-control pilot study. METHODS: MRI exams of the head and neck of 40 children affected by OSAHS were retrospectively evaluated. 25 indices referring to the air lumen, soft tissues and craniofacial skeleton were measured. Subsequently, the same process of measurement of indices was performed on MRI exams of 40 controls. For each index, then, we calculated in both groups mean, standard deviation, standard error and t value. Comparing the two series we finally calculated the degree of significance of each difference between children with OSAHS and controls through the Student's t-test. RESULTS: Besides the expected and previously described differences of minimum retropharyngeal cross-sectional area (CSA), nasopharyngeal airway, combined upper airway volume, tonsillar and adenoid cross-sectional and volumetric indices, we found a higher midsagittal CSA of the soft palate and lower position of the hyoid bone, SNB angle and mandibular volume. CONCLUSIONS: Results from our study population, certainly limited in terms of number of patients and considered age range, showed that not only adeno-tonsillar hypertrophy is important in determining the clinical syndrome: soft palate enlargement and certain skeletal pattern can even assume greater importance in the genesis and in the progression of the obstruction. MRI proved to be an accurate technique in the evaluation of the prevalent risk factor in children affected by OSAHS, leading to the most appropriate surgical approach.

Juvenile nephropathy in a Boxer dog resembling the human nephronophthisis-medullary cystic kidney disease complex.

A juvenile nephropathy in a 4-year-old male Boxer dog, closely resembling the Nephronophthisis (NPHP)-Medullary Cystic Kidney Disease Complex (MCKD) in humans is described. Gross examination of the kidneys revealed several multiple cysts at the corticomedullary junction and in the medulla. Histological examination was characterized by a widespread tubular atrophy and dilatation, with a marked thickening of the tubular basement membrane, interstitial lymphocytic infiltration and fibrosis. Ultrastructural studies revealed dilated tubules with irregular basement membrane thickening and splitting. Lectin histochemistry investigation revealed that the cysts originated in the distal convoluted tubule and collecting duct. Having excluded all other known cystic diseases of the kidney, and based on the lectin histochemistry results, the macroscopic and histological findings of our case are highly compatible with a diagnosis of the NPHP-MCKD complex. To our knowledge, this is the first report describing this particular lesion.

Darcian preferential water flow and solute transport through bimodal porous systems: experiments and modelling.

Soils often exhibit a variety of small-scale heterogeneities such as inter-aggregate pores and voids which partition flow into separate regions. In this paper a methodological approach is discussed for characterizing the hydrological behaviour of a heterogeneous clayey-sandy soil in the presence of structural inter-aggregate pores. For the clay soil examined, it was demonstrated that, coupling the transfer function approach for analyzing BTCs and water retention data obtained with different methods from laboratory studies captures the bimodal geometry of the porous system along with the related existence of fast and slow flow paths. To be effectively and reliably applied this approach requires that the predominant effects of the soil hydrological behaviour near saturation be supported by accurate experimental data of both breakthrough curves (BTCs) and hydraulic functions for high water content values. This would allow the separation of flow phases and hence accurate identification of the processes and related parameters.