RESUMO
Abrasion of tire tread, caused by friction between vehicle tires and road surfaces, causes release of tire wear particles (TWPs) into various environmental compartments. These TWPs contribute to chemical, microplastic, and particulate matter pollution. Their fate remains largely unknown, especially regarding the extent and form in which they persist in the environment. The present study investigated (1) the biodegradability of tread particles (TPs) in the form of ground tire tread, (2) how accelerated ultraviolet (UV) weathering affects their biodegradability, and (3) which TP constituents are likely contributors to TP biodegradability based on their individual biodegradability. A series of closed-bottle tests, with aerobic aqueous medium inoculated with activated sludge, were carried out for pristine TPs, UV-weathered TPs, and selected TP constituents; natural rubber (NR), isoprene rubber (IR), butadiene rubber (BR), and treated distillate aromatic extracts (TDAE). Biodegradation was monitored by manometric respirometry, quantifying biological oxygen consumption over 28 days. Pristine TP biodegradability was found to be 4.5%; UV-weathered TPs showed higher biodegradability of 6.7% and 8.0% with similar and increased inoculum concentrations, respectively. The observed TP biodegradation was mainly attributed to biodegradation of NR and TDAE, with individual biodegradability of 35.4% and 8.0%, respectively; IR and BR showed negligible biodegradability. These findings indicate that biodegradability of individual constituents is decreased by a factor of 2 to 5 when compounded into TPs. Through scanning electron microscopy analysis, biodegradation was found to cause surface erosion. Processes of TP biodegradation are expected to change throughout their lifetime as new constituents are incorporated from the road and others degrade and/or leach out. Tire emissions likely persist as particles with an increased fraction of synthetic rubbers and carbon black. Environ Toxicol Chem 2024;43:31-41. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
Assuntos
Material Particulado , Plásticos , Material Particulado/análise , Poluição Ambiental/análise , Ecotoxicologia , ÁguaRESUMO
In 2004, the potential societal implications related to nanotechnology were highlighted in an influential report by the Royal Society and the Royal Academy of Engineering (RS & RAE). It was made clear that legislation is an important tool to tackle the challenges related to nanomaterials and a list of recommendations were put forward. Shortly after, the European Commission also proposed a list of recommendations on how to handle nanomaterial challenges and adopted the so-called "incremental approach", describing that current legislations should be adapted, where relevant, to handle nanomaterials. Now almost 20 years have passed and it seems relevant to take stock and investigate how legislations have been adapted to tackle nano-specific challenges. In this review, we analyze key pieces of European legislations relevant to nanomaterials and assess to what extent these legislations compare with the original recommendations from 2004 by the RS & RAE and the European Commission. We uncover the cross-cutting challenges that remain and provide recommendations on next steps that should be taken to address the risks of nanomaterials. For each recommendation, we assessed whether it was met to a high, medium or low degree by conducting targeted literature searches at Web of Science, screening legislations, guidance documents, databases etc., and applying expert judgement. We found that >90% of the recommendations put forward in 2004 by the RS & RAE and the European Commission have been either met to a high degree (13 out of 29) or met to a medium degree (14 out of 29). This suggests important advancements in the field of nanosafety. At the same time, it is important to address the concerns still left partly or fully unsolved. Such efforts entail e.g. further development of measuring instruments and standardised characterization and risk assessment methods for nanomaterials, application of a uniform nanomaterial definition, maximization of containment of free nanomaterials until hazards assessed/handled and elimination/minimisation of unintentional nanomaterial emission. Furthermore, we recommend prioritising future efforts to ensure enforcement and implementation of existing nano-specific provisions, as well as revision, where needed, of legislations that currently do not account for nanomaterials, such as the Waste Framework Directive.
Assuntos
Nanoestruturas , União Europeia , Nanoestruturas/efeitos adversos , NanotecnologiaRESUMO
Despite the increasing concern about the harmful effects of micro- and nanoplastics (MNPs), there are no harmonized guidelines or protocols yet available for MNP ecotoxicity testing. Current ecotoxicity studies often use commercial spherical particles as models for MNPs, but in nature, MNPs occur in variable shapes, sizes and chemical compositions. Moreover, protocols developed for chemicals that dissolve or form stable dispersions are currently used for assessing the ecotoxicity of MNPs. Plastic particles, however, do not dissolve and also show dynamic behavior in the exposure medium, depending on, for example, MNP physicochemical properties and the medium's conditions such as pH and ionic strength. Here we describe an exposure protocol that considers the particle-specific properties of MNPs and their dynamic behavior in exposure systems. Procedure 1 describes the top-down production of more realistic MNPs as representative of MNPs in nature and particle characterization (e.g., using thermal extraction desorption-gas chromatography/mass spectrometry). Then, we describe exposure system development for short- and long-term toxicity tests for soil (Procedure 2) and aquatic (Procedure 3) organisms. Procedures 2 and 3 explain how to modify existing ecotoxicity guidelines for chemicals to target testing MNPs in selected exposure systems. We show some examples that were used to develop the protocol to test, for example, MNP toxicity in marine rotifers, freshwater mussels, daphnids and earthworms. The present protocol takes between 24 h and 2 months, depending on the test of interest and can be applied by students, academics, environmental risk assessors and industries.
Assuntos
Microplásticos , Poluentes Químicos da Água , Humanos , Microplásticos/análise , Microplásticos/toxicidade , Plásticos/toxicidade , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/química , Poluentes Químicos da Água/toxicidadeRESUMO
The increasing release of engineered nanoparticles (NPs) into aquatic ecosystems makes it crucial to understand the interactions of NPs with aquatic organisms, such as algae. In this study, the association of CeO2 NPs with unicellular algae (Raphidocelis subcapitata) and changes to the cellular elemental profile were investigated using three exposure concentrations (1, 50, and 1000 µg CeO2/L) at two different algal growth conditions-exponential and inhibited growth (1% glutaraldehyde). After a 24 h-exposure, algal suspensions were settled by gravity and CeO2-NP/algae association was analyzed by single-cell inductively coupled plasma quadrupole mass spectrometry (sc-ICP-QMS) and ICP time-of-flight MS (sc-ICP-TOFMS). Concurrent detection of the cellular fingerprint with cerium indicated NP association with algae (adsorption/uptake) and changes in the cellular elemental profiles. Less than 5% of cells were associated with NPs when exposed to 1 µg/L. For 50 µg/L exposures in growing and inhibited cell treatments, 4% and 16% of cells were associated with CeO2 NPs, respectively. ICP-TOFMS analysis made it possible to exclude cellular exudates associated with CeO2 NPs due to the cellular fingerprint. Growing and inhibited cells had different elemental profile changes following exposure to CeO2 NPs-e.g., growing cells had higher Mg and lower P contents independent of CeO2 concentration compared to inhibited cells.
RESUMO
Cationic polymer (CP) ecotoxicity is important to understand and investigate as they are widely used in industrial and consumer applications and have shown toxic effects in some aquatic organisms. CPs are identified as "polymers of concern" and are to be prioritized in upcoming regulatory reviews, (e.g., REACH). Algae have generally been found to be the most sensitive trophic level to CP. This study aimed at elucidating the magnitude of cationic polyquaternium toxicity towards algae and to understand key toxicological drivers. A suite of polyquaterniums with varying charge density (charged nitrogen moieties) and molecular weight were selected. Highly charged polyquaternium-6 and -16 were toxic towards the freshwater green microalgae Raphidocelis subcapitata with ErC50-values ranging between 0.12 and 0.41 mg/L. Lower charge density polyquaternium-10 materials had much lower toxicity with ErC50 > 200 mg/L, suggesting that charge density is an important driver of algal toxicity. These levels of toxicity were in line with historic CP data in literature. Algal agglomeration was observed in all tests but was not linked with impacts on algal growth rate. However, agglomeration can pose challenges in the technical conduct of tests and can impair interpretation of results. The toxicity mitigation potential of humic acid was also explored. The addition of 2-20 mg/L humic acid completely mitigated PQ6 and PQ16 toxicity at concentrations higher than clean water ErC50-values. CP toxicity mitigation has also been observed in fish and invertebrate tests, suggesting that CP mitigation should be accounted for in all trophic levels within an environmental safety framework.
Assuntos
Clorófitas , Poluentes Químicos da Água , Animais , Substâncias Húmicas , Poluentes Químicos da Água/toxicidade , Polímeros/toxicidade , Água Doce , Cátions/toxicidadeRESUMO
The discharge of H2S scavenging wastewaters, containing spent and unspent scavengers (SUS), into the marine environment is a large contributor to the environmental impact of offshore oil and gas production. Hydrothermal oxidation (HTO) can be a viable method for on-site treatment of the SUS before discharge, but the effect of the process on the ecotoxicity of the effluent has not been investigated so far. The aim of this study was to investigate the potential of the HTO technology in reducing the environmental impact by linking the chemical process design with ecotoxicity reduction. For this, we combined HTO experiments on a SUS sample from an oil and gas platform in the North Sea with whole effluent ecotoxicity evaluation before and after the treatment. The HTO process was carried out under excess of oxygen, for temperatures and pressures in the range 199 to 350°C and 83 to 228 bar, respectively, and for reaction times of 5 to 360 min. Initially, the SUS sample exhibited very high ecotoxicity, which was drastically reduced by the HTO process. More specifically, the ecotoxicity towards bacteria was reduced more than 90% for all HTO conditions, while the reduction in algal toxicity was in the range 48% to 66%, 59% to 86% and 60% to 82% at reaction temperatures of 199°C, 279°C, and 350°C, respectively. Furthermore, this work shows how typical wastewater chemical analyses, such as COD and TOC, and ecotoxicity tests towards different organisms provide complementary information, which should be used in combination to optimize operating conditions of the HTO process.
Assuntos
Águas Residuárias , Poluentes Químicos da Água , Animais , Eliminação de Resíduos Líquidos/métodos , Oxirredução , Peixes , TemperaturaRESUMO
The management of produced water (PW) discharges from offshore oil and gas installations in the North Atlantic is under the auspices of OSPAR (Oslo/Paris convention for Protection of the Marine Environment of the North-East Atlantic). In 2010, OSPAR introduced the risk-based approach (RBA) for PW management. The RBA includes a hazard assessment estimating PW ecotoxicity using two approaches: whole-effluent toxicity (WET) and substance-based (SB). Set against the framework of the WET and SB approach, we conducted a literature review on the magnitude and cause of PW ecotoxicity, respectively, and on the challenges of estimating these. A large variability in the reported magnitude of PW WET was found, with EC50 or LC50 values ranging from <1% to >100%, and a median of 11% (n = 301). Across the literature, metals, hydrocarbons, and production chemicals were identified as causing ecotoxicity. However, this review reveals how knowledge gaps on PW composition and high sample and species dependency of PW ecotoxicity make clear identification and generalization difficult. It also highlights how limitations regarding the availability and reliability of ecotoxicity data result in large uncertainties in the subsequent risk estimates, which is not adequately reflected in the RBA output (e.g., environmental impact factors). Thus, it is recommended to increase the focus on improving ecotoxicity data quality before further use in the RBA, and that WET should play a more pronounced role in the testing strategy. To increase the reliability of the SB approach, more attention should be paid to the actual composition of PW. Bioassay-directed chemical analysis, combining outcomes of WET and SB in toxicity identification evaluations, may hold the key to identifying drivers of ecotoxicity in PW. Finally, an uncertainty appraisal must be an integrated part of all reporting of risk estimates in the RBA, to avoid mitigation actions based on uncertainties rather than reliable ecotoxicity estimations. Integr Environ Assess Manag 2023;19:1172-1187. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).
Assuntos
Poluentes Químicos da Água , Água , Água/análise , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Reprodutibilidade dos Testes , Medição de Risco , EcotoxicologiaRESUMO
Titanium dioxide nanoparticles (n-TiO2) and polychlorinated biphenyls (PCBs) can be present in the food of fish, leading to intestinal exposure uptake, and accumulation in inner organs. This study examined combination effects of n-TiO2 and PCB77 in vitro models of the fish intestinal epithelium and liver, i.e., RTgut-GC cell cultures grown in ThinCerts™ and RTL-W1 cell cultures grown in standard tissue culture plates. Mass spectrometry and microscopy techniques were used to obtain information on nanoparticle translocation across the intestinal barrier model. In addition, the substances' effect on intestinal barrier permeability, cell viability, expression of dioxin - and antioxidant response element -controlled genes, and induction of cytochrome P450 1a (Cyp1a)-dependent ethoxyresorufin-O-deethylase (EROD) activity were assessed. TiO2 nanoparticles were taken up by RTgut-GC cells and detected in the bottom compartment of the intestinal epithelial barrier model. It was not possible to conclude definitively if n-TiO2 translocation occurred via transcytosis or paracellular migration but observations of nanoparticles in the lateral space between adjacent epithelial cells were rare. PCB77 (1 and 10 µM, 24 h) did not affect barrier permeability, i.e., n-TiO2 translocation is probably not facilitated in case of co-exposure. Furthermore, previous and simultaneous exposure to n-TiO2 (1 and 10 mg/L, 24 h) did not have any influence on PCB77-induced Cyp1a mRNA and enzyme activity levels in RTL-W1 cells. Furthermore, there were no significant differences in expression of antioxidant response element-controlled genes comparing control, single substance, and mixture treatments, not even following long-term exposure (0.01-1 mg/L n-TiO2 + 1 nM PCB77, 4 weeks). While an underestimation of the effects of n-TiO2 and PCB77 cannot be fully excluded as concentration losses due to sorption to cell culture plastics were not measured, the results suggest that the test substances probably have a low potential to exhibit combination effects on the assessed endpoints when co-existing in fish tissues.
Assuntos
Bifenilos Policlorados , Poluentes Químicos da Água , Animais , Poluentes Químicos da Água/toxicidade , Fígado , Titânio/farmacologia , Bifenilos Policlorados/toxicidade , Bifenilos Policlorados/metabolismo , PeixesRESUMO
Nanoparticles and colored substances can inhibit algal growth by light shading and chemical toxicity. This study presents two complementary approaches to account for shading in algal growth inhibition tests of engineered nanomaterials (ENMs) and colored substances. The first approach distinguishes between shading effects and toxicity by varying the light path in parallel algal growth inhibition tests. This Multiple Path-Length (MPL) test was applied to TiO2 ENMs and the colored substances sodium picramate and Rhodamine B. A left shifting of concentration-response curves, with increasing light path lengths, indicated shading for Rhodamine B, sodium picramate and TiO2 ENMs. EC50-values obtained at the shortest light path length were generally found best suited to quantify the toxicity of ENMs and colored substances. The second approach addresses shading at the cellular level, where particles can attach to the cell surface and affect photo-pigment content and composition. Pigments associated with photosystem I and II were determined at varying light intensities and concentrations of TiO2 ENMs. The photo-pigments that increased in response to physical shading, decreased after TiO2 ENMs exposure. This indicates that toxicity rather than cellular shading dominated the response of algae exposed to TiO2 ENMs. Additional tests were conducted with the nanomaterials CeO2 and goethite to evaluate the applicability of this approach to other ENMs. On this basis, we recommend MPL testing for determining EC50-values that are not confounded by shading in the test solution, and the pigment-based approach for investigating shading on the cellular level.
Assuntos
Nanopartículas , Nanoestruturas , Nanopartículas/toxicidade , Nanoestruturas/química , Nanoestruturas/toxicidade , Sódio , Titânio/toxicidadeRESUMO
The number and volume of advanced materials being manufactured is increasing. In order to mitigate future impacts from such materials, assessment methods that can provide early indications of potential environmental risk are required. This paper presents a further development and testing of an environmental risk screening method based on two proxy measures: aquatic ecotoxicity and global annual production volumes. In addition to considering current production volumes, this further developed method considers potential future production volumes, thereby enabling prospective environmental risk screening. The proxy measures are applied to seven advanced materials: graphene, graphene oxide, nanocellulose, nanodiamond, quantum dots, nano-sized molybdenum disulfide, and MXenes. Only MXenes show high aquatic ecotoxicity, though the number of test results is still very limited. While current production volumes are relatively modest for most materials, several of the materials (graphene, graphene oxide, nanocellulose, nano-sized molybdenum disulfide, and MXenes) have the potential to become high-volume materials in the future. For MXenes, with both high aquatic ecotoxicity and high potential future production volumes, more detailed environmental risk assessments should be considered. For the other materials with high potential future production volumes, the recommendation is to continuously monitor their aquatic ecotoxicity data. Based on the application of the proxy measures combined with future scenarios for production volumes, we recommend this environmental risk screening method be used in the early development of advanced materials to prioritize which advanced materials should be subject to more detailed environmental assessments.
Assuntos
Grafite , Grafite/toxicidade , Estudos Prospectivos , Medição de RiscoRESUMO
For engineered metal nanoparticles (NPs), such as copper oxide (CuO) NPs, the sediment is recognized as a major compartment for NP accumulation. Sediment-dwelling organisms, such as the worm Tubifex tubifex, will be at particular risk of metal and metal NP exposure. However, a range of complex transformation processes in the sediment affects NP bioavailability and toxicity as the contamination ages. The objective of this study was to examine bioaccumulation and adverse effects of CuO NPs in T. tubifex compared to dissolved Cu (administered as CuCl2) and the influence of aging of spiked sediment. This was done in a 28-day exposure experiment with T. tubifex incubated in clean sediment or freshly spiked sediment with different concentrations of dissolved Cu (up to 230 µg g-1 dw) or CuO NPs (up to 40 µg g-1 dw). The experiment was repeated with the same sediments after it had been aged for 2 years. To obtain a distinct isotopic signature compared to background Cu, both Cu forms were based on the stable isotope 65Cu (>99%). The 28-day exposure to sediment-associated dissolved 65Cu and 65CuO NPs resulted in a clear concentration-dependent increase in the T. tubifex 65Cu body burden. However, despite the elevated 65Cu body burdens in exposed worms, limited adverse effects were observed in either of the two experiments (e.g., above 80% survival in all treatments, low or no effects on the growth rate, feeding rate, and reproduction). Organisms exposed to aged sediments had lower body burdens of 65Cu than those exposed to freshly spiked sediments and we suggest that aging decreases the bioavailability of both 65Cu forms. In this study, the use of a stable isotope made it possible to use environmentally realistic Cu concentrations and, at the same time, differentiate between newly accumulated 65Cu and background Cu in experimental samples despite the high background Cu concentrations in sediment and T. tubifex tissue. Realistic exposure concentrations and aging of NPs should preferably be included in future studies to increase environmental realism to accurately predict the environmental risk of metal NPs.
RESUMO
With the intention to move away from animal testing for the toxicological evaluation of chemicals comes the need to develop new approach methodologies which are mechanism-anchored and target relevant key events leading to an adverse outcome. To date, no validated alternative methods are available for studying the acute inhalation toxicity potential of airborne chemicals but the constrained drop surfactometer measuring the surface tension of a drop of lung surfactant presents as a promising candidate. Indeed, the correlation of the increase in minimum surface tension of lung surfactant in vitro with changes in the breathing patterns of mice after inhalation of test compounds has been shown in multiple studies. However, the causal factors leading to lung surfactant inactivation remain speculative. This paper combines molecular and biophysical methods (constrained drop and captive bubble surfactometers, Langmuir-Blodgett balance, epifluorescence microscopy, cryogenic transmission electron microscopy, and differential scanning calorimetry) applied to purified porcine lung surfactant and dipalmitoylphosphatidylcholine interfacial films to gain insights into the disruption of lung surfactant function by three chemicals known to show acute inhalation toxicity (trimethoxyoctylsilane, methyl 3-oxo-2-pentylcyclopentaneacetate, and diisopentyl ether). The results of this study suggest that the test chemicals intercalate between the phospholipids at the air-liquid interface, reduce the stability of the films, and decrease the cohesivity of interface-associated multilayered structures thereby perturbing the lung surfactant surface activity. These findings contribute to a better understanding of chemically-induced lung surfactant function disruption.
Assuntos
Pulmão/química , Fosfolipídeos/química , Surfactantes Pulmonares/química , Animais , SuínosRESUMO
Copper oxide nanoparticles (CuO NPs) accumulating in sediment can be taken up by invertebrates that serve as prey for fish. Thus, it is likely that the latter are exposed to CuO NPs via the gut. However, to this day it is unknown if CuO NPs can be taken up via the gastrointestinal tract and if and in which tissues/organs they accumulate. To address this knowledge gap, we synthesized CuO NPs enriched in the stable isotope 65Cu and incorporated them at low concentration (5 µg 65Cu g-1 ww food) into a practical diet prepared from worm homogenate, which was then fed to Three-spined Stickleback (Gasterosteus aculeatus) for 16 days. For comparison, fish were exposed to a diet spiked with a 65CuCl2 solution. Background Cu and newly taken up 65Cu in fish tissues/organs including gill, stomach, intestine, liver, spleen, gonad and carcass and feces were quantified by ICP-MS. In addition, expression levels of genes encoding for proteins related to Cu uptake, detoxification and toxicity (ctr-1, gcl, gr, gpx, sod-1, cat, mta and zo-1) were measured in selected tissues using RT-qPCR. The obtained results showed that feces of fish fed 65CuO NP-spiked diet contained important amounts of 65Cu. Furthermore, there was no significant accumulation of 65Cu in any of the analyzed internal organs, though 65Cu levels were slightly elevated in liver. No significant modulation in gene expression was measured in fish exposed to 65CuO NP-spiked diet, except for metallothionein, which was significantly upregulated in intestinal tissue compared to control fish. Altogether, our results suggests that dietary absorption efficiency of CuO NPs, their uptake across the gastrointestinal barrier into the organism, and effects on Cu-related genes is limited at low, environmentally relevant exposure doses (0.2 µg 65Cu -1 fish ww day-1).
Assuntos
Nanopartículas Metálicas , Smegmamorpha , Poluentes Químicos da Água , Cobre/análise , Cobre/toxicidade , Dieta/veterinária , Isótopos , Nanopartículas Metálicas/toxicidade , Poluentes Químicos da Água/toxicidadeRESUMO
Ecotoxicity data is a requirement for pre- and post-market registration of chemicals by European and international regulations (e.g., REACH). The algal toxicity test is frequently used in regulatory risk assessment of chemicals. In order to achieve high reliability and reproducibility the development of standardized guidelines is vital. For algal toxicity testing, the guidelines require stable and uniform conditions of parameters such as pH, temperature, carbon dioxide levels and light intensity. Nanomaterials and other so-called difficult substances can interfere with light causing a large variation in results obtained hampering their regulatory acceptance. To address these challenges, we have developed LEVITATT (LED Vertical Illumination Table for Algal Toxicity Tests). The setup utilizes LED illumination from below allowing for a homogenous light distribution and temperature control while also minimizing intra-sample shading. The setup optimizes the sample volume for biomass quantification and does at the same time ensure a sufficient influx of CO2 to support exponential growth of the algae. Additionally, the material of the test containers can be tailored to minimize adsorption and volatilization. When testing colored substances or particle suspensions, the use of LED lights also allows for increasing the light intensity without additional heat generation. The compact design and minimal equipment requirements increase the possibilities for implementation of the LEVITATT in a wide range of laboratories. While compliant with standardized ISO and OECD guidelines for algal toxicity testing, LEVITATT also showed a lower inter-sample variability for two reference substances (3,5-Dicholorophenol and K2Cr2O7) and three nanomaterials (ZnO, CeO2, and BaSO4) compared to Erlenmeyer flasks and microtiter plates.
Assuntos
Células Eucarióticas/metabolismo , Nanoestruturas/química , Testes de Toxicidade/métodos , Luz , Iluminação , Reprodutibilidade dos TestesRESUMO
This paper outlines a new concept to optimise testing strategies for improving the efficiency of chemical testing for hazard-based risk management. While chemical classification based on standard checklists of information triggers risk management measures, the link is not one-to-one. Toxicity testing may be performed with no impact on the safe use of chemicals . Each hazard class and category is not assigned a unique pictogram and for the purpose of this proof-of-concept study, the level of concern for a chemical for the population and the environment is simplistically considered to be reflected by the hazard pictograms. Using active substances in biocides and plant protection products as a dataset, three testing strategies were built with the boundary condition that an optimal approach must indicate a given level of concern while requiring less testing (strategy B), prioritising new approach methodologies (strategy C) or combining the two considerations (strategy D). The implementation of the strategies B and D reduced the number of tests performed by 6.0% and 8.8%, respectively, while strategy C relied the least on in vivo methods. The intentionally simplistic approach to optimised testing strategies presented here could be used beyond the assessment of biocides and plant protection products to gain efficiencies in the safety assessment of other chemical groups, saving animals and making regulatory testing more time- and cost-efficient.
Assuntos
Segurança Química/métodos , Poluentes Ambientais/toxicidade , Substâncias Perigosas/toxicidade , Testes de Toxicidade/métodos , Segurança Química/legislação & jurisprudência , Poluentes Ambientais/classificação , União Europeia , Regulamentação Governamental , Substâncias Perigosas/classificação , Humanos , Medição de Risco , Gestão de RiscosRESUMO
The last two decades have seen a rise in the development of lanthanum (III)-containing materials (LM) for controlling phosphate in the aquatic environment. >70 papers have been published on this topic in the peer-reviewed literature, but mechanisms of phosphate removal by LM as well as potential environmental impacts of LM remain unclear. In this review, we summarize peer-reviewed scientific articles on the development and use of 80 different types of LM in terms of prospective benefits, potential ecological impacts, and research needs. We find that the main benefits of LM for phosphate removal are their ability to strongly bind phosphate under diverse environmental conditions (e.g., over a wide pH range, in the presence of diverse aqueous constituents). The maximum phosphate uptake capacity of LM correlates primarily with the La content of LM, whereas reaction kinetics are influenced by LM formulation and ambient environmental conditions (e.g., pH, presence of co-existing ions, ligands, organic matter). Increased La solubilization can occur under some environmental conditions, including at moderately acidic pH values (i.e., < 4.5-5.6), highly saline conditions, and in the presence of organic matter. At the same time, dissolved La will likely undergo hydrolysis, bind to organic matter, and combine with phosphate to precipitate rhabdophane (LaPO4·H2O), all of which reduce the bioavailability of La in aquatic environments. Overall, LM use presents a low risk of adverse effects in water with pH > 7 and moderate-to-high bicarbonate alkalinity, although caution should be applied when considering LM use in aquatic systems with acidic pH values and low bicarbonate alkalinity. Moving forward, we recommend additional research dedicated to understanding La release from LM under diverse environmental conditions as well as long-term exposures on ecological organisms, particularly primary producers and benthic organisms. Further, site-specific monitoring could be useful for evaluating potential impacts of LM on both biotic and abiotic systems post-application.
Assuntos
Lantânio , Poluentes Químicos da Água , Adsorção , Cinética , Fosfatos , Estudos Prospectivos , ÁguaRESUMO
Species sensitivity distributions (SSDs) are used in chemical safety assessments to derive predicted-no-effect-concentrations (PNECs) for substances with a sufficient amount of relevant and reliable ecotoxicity data available. For engineered nanomaterials (ENMs), ecotoxicity data are often compromised by poor reproducibility and the lack of nano-specific characterization needed describe an ENM under test exposure conditions. This may influence the outcome of SSD modelling and hence the regulatory decision-making. This study investigates how the outcome of SSD modelling is influenced by: 1) Selecting input data based on the nano-specific "nanoCRED" reliability criteria, 2) Direct SSD modelling avoiding extrapolation of data by including long-term/chronic NOECs only, and 3) Weighting data according to their nano-specific quality, the number of data available for each species, and the trophic level abundance in the ecosystem. Endpoints from freshwater ecotoxicity studies were collected for the representative nanomaterials NM-300 K (silver) and NM-105 (titanium dioxide), evaluated for regulatory reliability and scored according to the level of nano-specific characterization conducted. The compiled datasets are unique in exclusively dealing with representative ENMs showing minimal batch-to-batch variation. The majority of studies were evaluated as regulatory reliable, while the degree of nano-specific characterization varied greatly. The datasets for NM-300 K and NM-105 were used as input to the nano-weighted n-SSWD model, the probabilistic PSSD+, and the conventional SSD Generator by the US EPA. The conventional SSD generally yielded the most conservative, but least precise HC5 values, with 95 % confidence intervals up to 100-fold wider than the other models. The inclusion of regulatory reliable data only, had little effect on the HC5 generated by the conventional SSD and the PSSD+, whereas the n-SSWD estimated different HC5 values based on data segregated according to reliability, especially for NM-105. The n-SSWD weighting of data significantly affected the estimated HC5 values, however in different ways for the sub-datasets of NM-300 K and NM-105. For NM-300 K, the inclusion of NOECs only in the weighted n-SSWD yielded the most conservative HC5 of all datasets and models (a HC5 based on NOECs only could not be estimated for NM-105, due to limited number of data). Overall, the estimated HC5 values of all models are within a relatively limited concentration range of 25-100 ng Ag/L for NM-300 K and 1-15 µgTiO2/L for NM-105.