Correction: Synthetic routes to carbon substituted cobalt bis(dicarbollide) alkyl halides and aromatic amines along with closely related irregular pathways.

Correction for 'Synthetic routes to carbon substituted cobalt bis(dicarbollide) alkyl halides and aromatic amines along with closely related irregular pathways' by Jan Nekvinda et al., Dalton Trans., 2024, 53, 5816-5826, https://doi.org/10.1039/D4DT00072B.

Synthetic routes to carbon substituted cobalt bis(dicarbollide) alkyl halides and aromatic amines along with closely related irregular pathways.

Carbon substituted cobalt bis(dicarbollide) alkyl halides [(1-X-(CH2)n-1,2-C2B9H10)(1,2-C2B9H11)-3,3'-Co]Me4N (X = Br, I; n = 1-3) are prepared in high yields (>90%) from their corresponding alcohols without side skeletal substitutions. These species offer access to the synthesis of aromatic cobalt bis(dicarbollide) amines, however only for particular terminal halogen substitution, the propylene pendant arm, and under appropriately controlled reaction conditions. Thus, the compounds substituted at cage carbon atoms with a propylene linker and terminal aromatic amine groups could be prepared. In other cases, numerous irregular reaction pathways occur, undoubtedly as a consequence of the bulky anionic boron cage in close proximity to the reaction site. Among them, an unusual intramolecular hydroboration forming rigidified carbon-to-boron bridged isomeric anions with an asymmetric structure that correspond to formulae [(1,8'-µ-C2H4)-(1,2-C2B9H10)(1',2'-C2B9H10)-3,3'-Co]- and [(1,7'-µ-C2H4)-(1,2-C2B9H10)(1',2'-C2B9H10)-3,3'-Co]- is described herein and the former isomer is structurally characterized. This product with a restrained geometry is widely accessible through nucleophile and/or thermally induced decomposition of (pseudo)halides attached to the cage via an ethylene linker. Surprisingly enough, also doubly bridged isomeric species [(1,8-µ-C2H4-1,2-C2B9H9)2-3,3'-Co]- and [(1,7-µ-C2H4-1,2-C2B9H9)2-3,3'-Co]- are available in good yield using these methods. Furthermore, other more typical side reactions are discussed, i.e. nucleophilic reactions of propyl halides with Me3N formed apparently by disproportionation of Me4N+ at higher temperatures or with pyridine used as a base.

Expanding Luminescence Horizons in Macropolyhedral Heteroboranes.

Luminescence is observed in three novel macropolyhedral nineteen- and eighteen-vertex chalcogenaboranes: Se2B17H17 (1), SeB17H19 (3) and SeB18H20 (4). This led us to the recognition that previously published macropolyhedral heteroborane species might also exhibit luminescence. Thus, the known nineteen- and eighteen-vertex dithiaboranes S2B17H17 (2), n-S2B16H16 (5) and i-S2B16H16 (6) were synthesised and also found to exhibit a range of luminescent properties. These macropolyhedral species are very different from the previously unique fluorescent binary borane B18H22 in terms of their structural architectures, by the presence of borane cluster hetero atoms, and, as in the cases of 5 and 6, that their synthetic origins are not derived simply through the modification of B18H22 itself. They consequently greatly expand the possibilities of finding new luminescent inorganic borane species.

Chemistry of Carbon-Substituted Derivatives of Cobalt Bis(dicarbollide)(1-) Ion and Recent Progress in Boron Substitution.

The cobalt bis(dicarbollide)(1-) anion (1-), [(1,2-C2B9H11)2-3,3'-Co(III)](1-), plays an increasingly important role in material science and medicine due to its high chemical stability, 3D shape, aromaticity, diamagnetic character, ability to penetrate cells, and low cytotoxicity. A key factor enabling the incorporation of this ion into larger organic molecules, biomolecules, and materials, as well as its capacity for "tuning" interactions with therapeutic targets, is the availability of synthetic routes that enable easy modifications with a wide selection of functional groups. Regarding the modification of the dicarbollide cage, syntheses leading to substitutions on boron atoms are better established. These methods primarily involve ring cleavage of the ether rings in species containing an oxonium oxygen atom connected to the B(8) site. These pathways are accessible with a broad range of nucleophiles. In contrast, the chemistry on carbon vertices has remained less elaborated over the previous decades due to a lack of reliable methods that permit direct and straightforward cage modifications. In this review, we present a survey of methods based on metalation reactions on the acidic C-H vertices, followed by reactions with electrophiles, which have gained importance in only the last decade. These methods now represent the primary trends in the modifications of cage carbon atoms. We discuss the scope of currently available approaches, along with the stereochemistry of reactions, chirality of some products, available types of functional groups, and their applications in designing unconventional drugs. This content is complemented with a report of the progress in physicochemical and biological studies on the parent cobalt bis(dicarbollide) ion and also includes an overview of recent syntheses and emerging applications of boron-substituted compounds.

A Window into the Workings of anti-B18H22 Luminescence-Blue-Fluorescent Isomeric Pair 3,3'-Cl2-B18H20 and 3,4'-Cl2-B18H20 (and Others).

The action of AlCl3 on room-temperature tetrachloromethane solutions of anti-B18H22 (1) results in a mixture of fluorescent isomers, 3,3'-Cl2-B18H20 (2) and 3,4'-Cl2-B18H20 (3), together isolated in a 76% yield. Compounds 2 and 3 are capable of the stable emission of blue light under UV-excitation. In addition, small amounts of other dichlorinated isomers, 4,4'-Cl2-B18H20 (4), 3,1'-Cl2-B18H20 (5), and 7,3'-Cl2-B18H20 (6) were isolated, along with blue-fluorescent monochlorinated derivatives, 3-Cl-B18H21 (7) and 4-Cl-B18H21 (8), and trichlorinated species 3,4,3'-Cl3-B18H19 (9) and 3,4,4'-Cl3-B18H19 (10). The molecular structures of these new chlorinated derivatives of octadecaborane are delineated, and the photophysics of some of these species are discussed in the context of the influence that chlorination bears on the luminescence of anti-B18H22. In particular, this study produces important information on the effect that the cluster position of these substitutions has on luminescence quantum yields and excited-state lifetimes.

"Activated Borane" - A Porous Borane Cluster Network as an Effective Adsorbent for Removing Organic Pollutants.

The unprecedented co-thermolysis of decaborane(14) (nido-B10 H14 ) and toluene results in a novel porous material (that we have named "activated borane") containing micropores between 1.0 and 1.5 nm in diameter and a specific surface area of 774 m2 g-1 (Ar, 87 K) that is thermally stable up to 1000 °C. Solid state 1 H, 11 B and 13 C MAS NMR, UV-vis and IR spectroscopies suggest an amorphous structure of borane clusters interconnected by toluene moieties in a ratio of about three toluene molecules for every borane cluster. In addition, the structure contains Lewis-acidic tri-coordinated boron sites giving it some unique properties. Activated borane displays high sorption capacity for pollutants such as sulfamethoxazole, tramadol, diclofenac and bisphenol A that exceed the capacity of commercially-available activated carbon. The consistency in properties for each batch made, and the ease of its synthesis, make activated borane a promising porous material worthy of broad attention.

Structurally rigidified cobalt bis(dicarbollide) derivatives, a chiral platform for labelling of biomolecules and new materials.

We report the difunctional modification of an anionic cobalta bis(dicarbollide)(1-) cluster with a B(8,8')-oxygen bridging unit that provides structural rigidity and an organic alkylazide substituent(s) on the carbon atoms of the metallacarborane cage. These ions present a good binding motif for incorporation into organic molecules using Huisgen-Sharpless (2+3) cycloaddition reactions. In addition, the compounds are chiral, as verified by separation of enantiomers using HPLC on chiral stationary phases (CSPs) and provide a high electrochemical peak in the window located outside of typical signals of biomolecules.

Stability of Different BTBP and BTPhen Extracting or Masking Compounds against γ Radiation.

The radiolytic stability of hydrophobic extracting compounds CyMe4-BTBP and CyMe4-BTPhen and a hydrophilic masking agent (PhSO3H)2-BTPhen, widely employed for trivalent minor actinoid and lanthanoid separation, against γ radiation was tested. Even though the solvent with a promising fluorinated diluent BK-1 provides better extraction properties compared to octan-1-ol, its radiation stability is much lower, and no extraction was observed already after an absorbed dose of 150 kGy (CyMe4-BTBP) or 200 kGy (CyMe4-BTPhen). For the (PhSO3H)2-BTPhen hydrophilic masking agent, the results showed that the rate of radiolytic degradation was significantly higher in 0.25 M HNO3 than in 0.5 M HNO3. For both the hydrophobic and hydrophilic agents, degradation was slower in the presence of both organic and aqueous phases during irradiation.

Thiaborane Icosahedral Barrier Increased by the Functionalization of all Terminal Hydrogens in closo-1-SB11H11.

The electrophilic substitution of icosahedral closo-1-SB11H11 with methyl iodide has resulted in two B-functionalized thiaboranes, 7,12-I2-2,3,4,5,6,8,9,10,11-(CH3)9-1-closo-SB11 and 7,8,12-I3-2,3,4,5,6,9,10,11-(CH3)8-closo-1-SB11, with the former being significantly predominant. These two icosahedral thiaboranes are the first cases of polysubstituted polyhedral boron clusters with another vertex that differs from B and C. Such polyfunctionalizations have increased the earlier observed thiaborane icosahedral barrier, not exhibiting any reactivity toward bases, unlike the parent thiaborane. The search for methylation pathways has revealed that the complete B11-methylation is impossible, like in the case of decaborane(14), where this seems to be a result of the positively charged upper parts of these two molecules.

Cobalt Bis(dicarbollide) Alkylsulfonamides: Potent and Highly Selective Inhibitors of Tumor Specific Carbonic Anhydrase IX.

Invited for this month's cover is a collaboration from three institutes from the Czech Academy of Sciences: Institute of Inorganic Chemistry, Institute of Organic Chemistry and Biochemistry, and Institute of Molecular Genetics, and the University of Pardubice. The cover picture shows a family of potent and selective CA IX inhibitors that combines the structural motif of a bulky inorganic cobalt bis(dicarbollide) polyhedral ion with a propylsulfonamido anchor group. Read the full text of the article at 10.1002/cplu.202000574.

Cobalt Bis(dicarbollide) Alkylsulfonamides: Potent and Highly Selective Inhibitors of Tumor Specific Carbonic Anhydrase IX.

Carbonic anhydrase IX (CAIX) is an enzyme expressed on the surface of cells in hypoxic tumors. It plays a role in regulation of tumor pH and promotes thus tumor cell survival and occurrence of metastases. Here, derivatives of the cobalt bis(dicarbollide)(1-) anion are reported that are based on substitution at the carbon sites of the polyhedra by two alkylsulfonamide groups differing in the length of the aliphatic connector (from C1 to C4, n=1-4), which were prepared by cobalt insertion into the 7-sulfonamidoalkyl-7,8-dicarba-nido-undecaborate ions. Pure meso- and rac-diastereoisomeric forms were isolated. The series is complemented with monosubstituted species (n=2). Synthesis by a direct method furnished similar derivatives (n=2, 3), which are chlorinated at the B(8,8') boron sites. All compounds inhibited CAIX with subnanomolar inhibition constants and showed high selectivity for CAIX. The best inhibitory properties were observed for the compound with n= 3 and two substituents present in rac-arrangement with Ki =20 pM and a selectivity index of 668. X-ray crystallography was used to study interactions of these compounds with the active site of CAIX on the structural level.

Tetrazole Ring Substitution at Carbon and Boron Sites of the Cobalt Bis(dicarbollide) Ion Available via Dipolar Cycloadditions.

Herein, we describe the synthesis of two families of compounds accessible from [3 + 2] cycloaddition reactions of known B8-substituted isonitrilium and new C1-alkylnitrile and C(1,1')-dialkylnitrile derivatives of the [(1,2-C2B9H11)2-3,3'-Co(III)]- ion with an azide ion that produce a tetrazole ring substitution at the cobaltacarborane cage. In addition, we outline the important differences in reactivity observed for the two types [B-isonitrilium/C-(alkyl)nitrile] of cobaltacarborane derivatives. The first family of compounds described corresponds to C5-atom-boronated tetrazole rings, with the five-membered moiety in the second type being doubly substituted at the N1 and C5 positions. This substitution opens cobaltacarborane chemistry to a new type of functional group at the cage of potential utility as structural blocks for use in medicinal chemistry or materials science. Our study includes single-crystal X-ray structures of the starting nitriles and both families of tetrazole derivatives, and the structural features that arise from the substitutions are discussed.

The structural basis for the selectivity of sulfonamido dicarbaboranes toward cancer-associated carbonic anhydrase IX.

Human carbonic anhydrase IX (CA IX), a protein specifically expressed on the surface of solid tumour cells, represents a validated target both for anticancer therapy and diagnostics. We recently identified sulfonamide dicarbaboranes as promising inhibitors of CA IX with favourable activities both in vitro and in vivo. To explain their selectivity and potency, we performed detailed X-ray structural analysis of their interactions within the active sites of CA IX and CA II. Series of compounds bearing various aliphatic linkers between the dicarbaborane cluster and sulfonamide group were examined. Preferential binding towards the hydrophobic part of the active site cavity was observed. Selectivity towards CA IX lies in the shape complementarity of the dicarbaborane cluster with a specific CA IX hydrophobic patch containing V131 residue. The bulky side chain of F131 residue in CA II alters the shape of the catalytic cavity, disrupting favourable interactions of the spherical dicarbaborane cluster.

Focus on Chemistry of the 10-Dioxane-nido-7,8-dicarba-undecahydrido Undecaborate Zwitterion; Exceptionally Easy Abstraction of Hydrogen Bridge and Double-Action Pathways Observed in Ring Cleavage Reactions with OH- as Nucleophile.

Ring cleavage of cyclic ether substituents attached to a boron cage via an oxonium oxygen atom are amongst the most versatile methods for conjoining boron closo-cages with organic functional groups. Here we focus on much less tackled chemistry of the 11-vertex zwitterionic compound [10-(O-(CH2-CH2)2O)-nido-7,8-C2B9H11] (1), which is the only known representative of cyclic ether substitution at nido-cages, and explore the scope for the use of this zwitterion 1 in reactions with various types of nucleophiles including bifunctional ones. Most of the nitrogen, oxygen, halogen, and sulphur nucleophiles studied react via nucleophilic substitution at the C1 atom of the dioxane ring, followed by its cleavage that produces six atom chain between the cage and the respective organic moiety. We also report the differences in reactivity of this nido-cage system with the simplest oxygen nucleophile, i.e., OH-. With compound 1, reaction proceeds in two possible directions, either via typical ring cleavage, or by replacement of the whole dioxane ring with -OH at higher temperatures. Furthermore, an easy deprotonation of the hydrogen bridge in 1 was observed that proceeds even in diluted aqueous KOH. We believe this knowledge can be further applied in the design of functional molecules, materials, and drugs.

Versatile, one-pot introduction of nonahalogenated 2-ammonio-decaborate ions as boron cluster scaffolds into organic molecules; host-guest complexation with γ-cyclodextrin.

We report the modification of the 2-ammonio group at halogenated decaborate ions with 2,3-epoxypropane, the product of which reacts readily with nucleophiles to form previously inaccessible coupling of polyhedra with organic molecules and materials. We demonstrate that these ions present a good binding motif in supramolecular chemistry.

Simultaneous determination of tert-butylhydroquinone, propyl gallate, and butylated hydroxyanisole by flow-injection analysis with multiple-pulse amperometric detection.

We report the first amperometric method for the simultaneous determination of tert-butylhydroquinone (tBHQ), propyl gallate (PG), and butylated hydroxyanisole (BHA) using flow injection analysis coupled to multiple-pulse amperometry. A sequence of potential pulses was selected in order to detect tBHQ, PG, and BHA separately in a single injection step at a glassy carbon electrode without the need of a preliminary separation. A mixture of methanol and 0.040M Britton-Robinson buffer was used both as a carrier solution and for dilution of analyzed solutions before injection. The method is precise (RSD < 5%, n = 10), fast (a frequency of 140 injections h-1), provides sufficiently low quantification limits (2.51, 1.45, and 0.85µmolL-1 for tBHQ, PG, and BHA, respectively) and can be easily applied without high demands on instrumentation. As a practical application, the determination of these antioxidants contained in commercial chewing gum samples was carried out by applying a simple extraction procedure.