RESUMO
We use multi-photon photoemission electron microscopy (PEEM) to image the enhanced electric fields of silver nanoparticles supported on a silver thin film substrate. Electromagnetic field enhancement is measured by comparing the photoelectron yield of the nanoparticles with respect to the photoelectron yield of the surrounding silver thin film. We investigate the dependence of the photoelectron yield of the nanoparticle as a function of size and shape. Multi-photon PEEM results are presented for three average nanoparticle diameters: 34, 75, and 122 nm. The enhancement in photoelectron yield of single nanoparticles illuminated with femtosecond laser pulses (400 nm, ~3.1 eV) is found to be a factor of 10(2) to 10(3) times greater than that produced by the flat silver thin film. High-resolution, multi-photon PEEM images of single silver nanoparticles reveal that the greatest enhancement in photoelectron yield is localized at distinct regions near the surface of the nanoparticle whose magnitude and spatial extent is dependent on the incident electric field polarization. In conjunction with correlated scanning electron microscopy (SEM), nanoparticles that deviate from nominally spherical shapes are found to exhibit irregular spatial distributions in the multi-photon PEEM images that are correlated with the unique shape and topology of the nanoparticle.
RESUMO
We use photoemission electron microscopy (PEEM) to image 3 µm diameter polystyrene spheres supported on a metal thin film illuminated by 400 nm (â¼3.1 eV) and 800 nm (â¼1.5 eV) femtosecond (fs) laser pulses. Intense photoemission is generated by microspheres even though polystyrene is an insulator and its ionization threshold is well above the photon energies employed. We observe intense photoemission from the far side (the side opposite the incident light) of the illuminated microsphere that is attributed to light focusing within the microsphere. For the case of p-polarized, 800 nm fs laser pulses, we observe photoemission exclusively from the far side of the microsphere and additionally resolve sub-50 nm hot spots in the supporting Pt∕Pd thin film that are located only within the focal region of the microsphere. We compare the PEEM images with finite difference time domain (FDTD) electrodynamic simulations to model our experimental results. The FDTD simulations predict light focusing in the microsphere and subsequent interaction with the supporting metal surface that is consistent with the experimental observations.
RESUMO
We present results of a combined two-photon photoemission and scanning electron microscopy investigation to determine the electromagnetic enhancement factors of silver-coated spherical nanoparticles deposited on an atomically flat mica substrate. Femtosecond laser excitation of the nanoparticles produces intense photoemission, attributed to near-resonant excitation of localized surface plasmons. Enhancement factors are determined by comparing the respective two-photon photoemission yields measured for single nanoparticles and the surrounding flat surface. For p-polarized, 400 nm (â¼3.1 eV) femtosecond radiation, a distribution of enhancement factors is found with a large percentage (67%) of the nanoparticles falling within a median range. A correlated scanning electron microscopy analysis demonstrated that the nanoparticles typifying the median of the distribution are characterized by spherical shapes and relatively smooth silver film morphologies. In contrast, the largest enhancement factors were produced by a small percentage (7%) of particles that displayed silver coating defects that altered the overall particle structure. Comparisons are made between the experimentally measured enhancement factors and previously reported calculations of the localized near-field enhancement for isolated silver nanoparticles.
Assuntos
Nanopartículas/química , Prata/química , Silicatos de Alumínio/química , Fenômenos Eletromagnéticos , Microscopia Eletrônica , Ressonância de Plasmônio de SuperfícieRESUMO
Band-to-band photoexcitation of potassium iodide single crystals with UV photons produces thermal and hyperthermal I-atom emission in both the ground I((2)P(3/2)) and spin-orbit excited I( *)((2)P(1/2)) states. Thermal halogen atom emission is preceded by H-center diffusion from bulk to surface and excited atom emission indicates that the excited hole spin state relaxation is incomplete before H-center diffusion to the surface. The hyperthermal I-atom kinetic energy distribution is inverted in the sense that the electronically excited I( *)((2)P(1/2)) atoms are more energetic than the ground state I((2)P(3/2)) atoms. The mechanism for hyperthermal emission of halogen atoms and their kinetic energy distributions are discussed in terms of recent calculations and a simple curve crossing model for the dynamical desorption process.
RESUMO
We excite low-coordinated surface sites of nanostructured CaO samples using tunable UV laser pulses and observe hyperthermal O-atom emission indicative of an electronic excited-state desorption mechanism. The O-atom yield increases dramatically with photon energy, between 3.75 and 5.4 eV, below the bulk absorption threshold. The peak of the kinetic energy distribution does not increase with photon energy in the range from 3.9 to 5.15 eV. These results are analyzed in the context of a laser desorption model developed previously for nanostructured MgO samples. The data are consistent with desorption induced by exciton localization at corner-hole trapped surface sites following electronic energy transfer from higher coordinated surface sites.
RESUMO
Ultraviolet excitation of high surface area MgO films using 4.7 eV femtosecond pulses results in neutral Mg-atom desorption with hyperthermal kinetic energies in the range 0.1-0.4 eV. The Mg-atom hyperthermal energies and power dependences are similar to those previously observed using nanosecond pulsed excitation. Femtosecond two-pulse correlation measurements reveal the existence of different dynamical paths for Mg-atom desorption. One mechanism displays a sub-150 fs time scale and involves the simultaneous or near-simultaneous transition of two electrons to a 3-coordinated Mg(2+) site. Other paths display picosecond time scales that we associate with dynamics following electron trapping at 3-coordinated Mg(2+) surface sites.
Assuntos
Físico-Química/métodos , Elétrons , Óxido de Magnésio/química , Magnésio/química , Adsorção , Elementos Químicos , Cinética , Lasers , Luz , Microscopia Eletrônica , Microscopia Eletrônica de Transmissão , Modelos Químicos , Fotoquímica/métodos , Propriedades de Superfície , Fatores de TempoRESUMO
In this work alpha-Cr(2)O(3)/alpha-Fe(2)O(3) core-shell polycrystalline nanostructures were synthesized by using alpha-Cr(2)O(3) nanoparticles as seed crystals during aqueous nucleation. The formation of alpha-Fe(2)O(3) polycrystallites on alpha-Cr(2)O(3) surfaces was confirmed by X-ray diffraction, transmission electron microscopy, and energy-dispersive X-ray analysis. The excited-state relaxation dynamics of as-grown core-shell structures and "pure" alpha-Fe(2)O(3) particles of the same size were measured with femtosecond transient absorption spectroscopy. The results show the carrier lifetimes decay within a few picoseconds regardless of sample. This is likely due to fast recombination/trapping of carriers to defects and iron d-states.
RESUMO
We review recent developments in controlling photoinduced desorption processes of alkali halides. We focus primarily on hyperthermal desorption of halogen atoms and show that the yield, electronic state, and velocity distributions of desorbed atoms can be selected using tunable laser excitation. We demonstrate that the observed control is due to preferential excitation of surface excitons. This approach takes advantage of energetic differences between surface and bulk exciton states and probes the surface exciton directly. We demonstrate that desorption of these materials leads to controlled modification of their surface geometric and electronic structures. We then extend the exciton mechanism of desorption, developed for alkali halides, to metal oxide surfaces, in particular magnesium oxide. In addition, these results demonstrate that laser desorption can serve as a solid-state source of halogen and oxygen atoms, in well-defined electronic and velocity states, for studying chemical processes in the gas phase and at surfaces.
RESUMO
We demonstrate laser control of the electronic product state distribution of photodesorbed halogen atoms from alkali halide crystals. Our general model of surface exciton desorption dynamics is developed into a simple method for laser control of the relative halogen atom spin-orbit laser desorption yield. By tuning the excitation laser photon energy in a narrow region of the absorption threshold, the yield of excited state chorine atoms, Cl(2P(1/2)), can be made to vary from near 0 to 80% for KCl and from near 0 to 50% for NaCl relative to the total yield of Cl atoms. We describe the physical properties necessary to obtain a high degree of product state control and the limitation induced when these requirements are not met. These results demonstrate that laser control can be applied to solid state surface reactions and provide strong support for surface exciton-based desorption models.
RESUMO
Intermediate pressure matrix-assisted laser desorption/ionization (MALDI) source was constructed and interfaced with a 6-T Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS) specially configured for surface-induced dissociation (SID) studies. First MALDI-SID results in FT-ICR are presented, demonstrating unique advantages of SID over conventional FT-ICR MS ion activation techniques for structural characterization of singly protonated peptide ions. Specifically, we demonstrate that SID on a diamond surface results in a significantly better sequence coverage for singly protonated peptides than SORI-CID. A combination of two effects contributes to the improved sequence coverage: shattering of peptide ions on surfaces opens up a variety of dissociation channels at collision energies above 40 eV, and second, wide internal energy distribution deposited by collision with a stiff diamond surface provides an efficient mixing between the primary reaction channels that are dominant at low internal energies and extensive fragmentation at high internal excitation that results from shattering. Activation of MALDI-generated ions by collisions with surfaces in FT-ICR MS is a new powerful method for characterization and identification of biomolecules