Direct Measurements of Covalently Bonded Sulfuric Anhydrides from Gas-Phase Reactions of SO3 with Acids under Ambient Conditions.

Sulfur trioxide (SO3) is an important oxide of sulfur and a key intermediate in the formation of sulfuric acid (H2SO4, SA) in the Earth's atmosphere. This conversion to SA occurs rapidly due to the reaction of SO3 with a water dimer. However, gas-phase SO3 has been measured directly at concentrations that are comparable to that of SA under polluted mega-city conditions, indicating gaps in our current understanding of the sources and fates of SO3. Its reaction with atmospheric acids could be one such fate that can have significant implications for atmospheric chemistry. In the present investigation, laboratory experiments were conducted in a flow reactor to generate a range of previously uncharacterized condensable sulfur-containing reaction products by reacting SO3 with a set of atmospherically relevant inorganic and organic acids at room temperature and atmospheric pressure. Specifically, key inorganic acids known to be responsible for most ambient new particle formation events, iodic acid (HIO3, IA) and SA, are observed to react promptly with SO3 to form iodic sulfuric anhydride (IO3SO3H, ISA) and disulfuric acid (H2S2O7, DSA). Carboxylic sulfuric anhydrides (CSAs) were observed to form by the reaction of SO3 with C2 and C3 monocarboxylic (acetic and propanoic acid) and dicarboxylic (oxalic and malonic acid)-carboxylic acids. The formed products were detected by a nitrate-ion-based chemical ionization atmospheric pressure interface time-of-flight mass spectrometer (NO3--CI-APi-TOF; NO3--CIMS). Quantum chemical methods were used to compute the relevant SO3 reaction rate coefficients, probe the reaction mechanisms, and model the ionization chemistry inherent in the detection of the products by NO3--CIMS. Additionally, we use NO3--CIMS ambient data to report that significant concentrations of SO3 and its acid anhydride reaction products are present under polluted, marine and polar, and volcanic plume conditions. Considering that these regions are rich in the acid precursors studied here, the reported reactions need to be accounted for in the modeling of atmospheric new particle formation.

Ambient air particulate total lung deposited surface area (LDSA) levels in urban Europe.

This study aims to picture the phenomenology of urban ambient total lung deposited surface area (LDSA) (including head/throat (HA), tracheobronchial (TB), and alveolar (ALV) regions) based on multiple path particle dosimetry (MPPD) model during 2017-2019 period collected from urban background (UB, n = 15), traffic (TR, n = 6), suburban background (SUB, n = 4), and regional background (RB, n = 1) monitoring sites in Europe (25) and USA (1). Briefly, the spatial-temporal distribution characteristics of the deposition of LDSA, including diel, weekly, and seasonal patterns, were analyzed. Then, the relationship between LDSA and other air quality metrics at each monitoring site was investigated. The result showed that the peak concentrations of LDSA at UB and TR sites are commonly observed in the morning (06:00-8:00 UTC) and late evening (19:00-22:00 UTC), coinciding with traffic rush hours, biomass burning, and atmospheric stagnation periods. The only LDSA night-time peaks are observed on weekends. Due to the variability of emission sources and meteorology, the seasonal variability of the LDSA concentration revealed significant differences (p = 0.01) between the four seasons at all monitoring sites. Meanwhile, the correlations of LDSA with other pollutant metrics suggested that Aitken and accumulation mode particles play a significant role in the total LDSA concentration. The results also indicated that the main proportion of total LDSA is attributed to the ALV fraction (50 %), followed by the TB (34 %) and HA (16 %). Overall, this study provides valuable information of LDSA as a predictor in epidemiological studies and for the first time presenting total LDSA in a variety of European urban environments.

Extreme Concentrations of Nitric Oxide Control Daytime Oxidation and Quench Nocturnal Oxidation Chemistry in Delhi during Highly Polluted Episodes.

Delhi, India, suffers from periods of very poor air quality, but little is known about the chemical production of secondary pollutants in this highly polluted environment. During the postmonsoon period in 2018, extremely high nighttime concentrations of NOx (NO and NO2) and volatile organic compounds (VOCs) were observed, with median NOx mixing ratios of ∼200 ppbV (maximum of ∼700 ppbV). A detailed chemical box model constrained to a comprehensive suite of speciated VOC and NOx measurements revealed very low nighttime concentrations of oxidants, NO3, O3, and OH, driven by high nighttime NO concentrations. This results in an atypical NO3 diel profile, not previously reported in other highly polluted urban environments, significantly perturbing nighttime radical oxidation chemistry. Low concentrations of oxidants and high nocturnal primary emissions coupled with a shallow boundary layer led to enhanced early morning photo-oxidation chemistry. This results in a temporal shift in peak O3 concentrations when compared to the premonsoon period (12:00 and 15:00 local time, respectively). This shift will likely have important implications on local air quality, and effective urban air quality management should consider the impacts of nighttime emission sources during the postmonsoon period.

Measurement of road traffic brake and tyre dust emissions using both particle composition and size distribution data.

Estimates of tyre and brake wear emission factors are presented, derived from data collected from roadside and urban background sites on the premises of the University of Birmingham, located in the UK's second largest city. Size-fractionated particulate matter samples were collected at both sites concurrently in the spring/summer of 2019 and analysed for elemental concentrations and magnetic properties. Using Positive Matrix Factorisation (PMF), three sources were identified in the roadside mass increment of the 1.0-9.9 µm stages of MOUDI impactors located at both sites, namely: brake dust (7.1%); tyre dust (9.6%); and crustal (83%). The large fraction of the mass apportioned to crustal material was suspected to be mainly from a nearby construction site rather than resuspension of road dust. By using Ba and Zn as elemental tracers, brake and tyre wear emission factors were estimated as 7.4 mg/veh.km and 9.9 mg/veh.km, respectively, compared with the PMF-derived equivalent values of 4.4 mg/veh.km and 11 mg/veh.km. Based on the magnetic measurements, an emission factor can be estimated independently for brake dust of 4.7 mg/veh.km. A further analysis was carried out on the concurrently measured roadside increment in the particle number size distribution (10 nm-10 µm). Four factors were identified in the hourly measurements: traffic exhaust nucleation; traffic exhaust solid particles; windblown dust; and an unknown source. The high increment of the windblown dust factor, 3.2 µg/m3, was comparable in magnitude to the crustal factor measured using the MOUDI samples (3.5 µg/m3). The latter's polar plot indicated that this factor was dominated by a large neighbouring construction site. The number emission factors of the exhaust solid particle and exhaust nucleation factors were estimated as 2.8 and 1.9 x 1012/veh.km, respectively.

Monitoring and apportioning sources of indoor air quality using low-cost particulate matter sensors.

Air quality is one of the most important factors in public health. While outdoor air quality is widely studied, the indoor environment has been less scrutinised, even though time spent indoors is typically much greater than outdoors. The emergence of low-cost sensors can help assess indoor air quality. This study provides a new methodology, utilizing low-cost sensors and source apportionment techniques, to understand the relative importance of indoor and outdoor air pollution sources upon indoor air quality. The methodology is tested with three sensors placed in different rooms inside an exemplar house (bedroom, kitchen and office) and one outdoors. When the family was present, the bedroom had the highest average concentrations for PM2.5 and PM10 (3.9 ± 6.8 ug/m3 and 9.6 ± 12.7 µg/m3 respectively), due to the activities undertaken there and the presence of softer furniture and carpeting. The kitchen, while presenting the lowest PM concentrations for both size ranges (2.8 ± 5.9 ug/m3 and 4.2 ± 6.9 µg/m3 respectively), presented the highest PM spikes, especially during cooking times. Increased ventilation in the office resulted in the highest PM1 concentration (1.6 ± 1.9 µg/m3), highlighting the strong effect of infiltration of outdoor air for the smallest particles. Source apportionment, via positive matrix factorisation (PMF), showed that up to 95 % of the PM1 was found to be of outdoor sources in all the rooms. This effect was reduced as particle size increased, with outdoor sources contributing >65 % of the PM2.5, and up to 50 % of the PM10, depending on the room studied. The new approach to elucidate the contributions of different sources to total indoor air pollution exposure, described in this paper, is easily scalable and translatable to different indoor locations.

Estimates of Future New Particle Formation under Different Emission Scenarios in Beijing.

New particle formation (NPF) is a leading source of particulate matter by number and a contributor to particle mass during haze events. Reductions in emissions of air pollutants, many of which are NPF precursors, are expected in the move toward carbon neutrality or net-zero. Expected changes to pollutant emissions are used to investigate future changes to NPF processes, in comparison to a simulation of current conditions. The projected changes to SO2 emissions are key in changing future NPF number, with different scenarios producing either a doubling or near total reduction in sulfuric acid-amine particle formation rates. Particle growth rates are projected to change little in all but the strictest emission control scenarios. These changes will reduce the particle mass arising by NPF substantially, thus showing a further cobenefit of net-zero policies. Major uncertainties remain in future NPF including the volatility of oxygenated organic molecules resulting from changes to NOx and amine emissions.

Limited impact of diesel particle filters on road traffic emissions of ultrafine particles.

Diesel engines are a major contributor to emissions of both Black Carbon (BC) and ultrafine particles. Analysis of data from the only roadside monitoring site in Europe with a continuous dataset for size-segregated particle number count (Marylebone Road, London) from 2010 to 2021 reveals that the growing number of vehicles fitted with a Diesel Oxidation Catalyst (DOC) and Diesel Particle Filter (DPF) has been very effective in controlling the emissions of solid particles and hence BC, but that there has been little change in the liquid mode (<30 nm) particles, and that concentrations of ultrafine particles (<100 nm) still well exceed the threshold for "high" concentrations (>104 cm-3 /24-hour mean) defined by WHO. BC declined by 81% between 2014 and 2021, but the ultrafine particle (<100 nm) count declined by only 26%. Consequently, in locations worldwide with heavy diesel traffic, concentrations of ultrafine particles are likely to remain "high" for the foreseeable future unless more effective abatement technologies are implemented.

Detecting high emitting vehicle subsets using emission remote sensing systems.

It is often assumed that a small proportion of a given vehicle fleet produces a disproportionate amount of air pollution emissions. If true, policy actions to target the highly polluting section of the fleet could lead to significant improvements in air quality. In this paper, high-emitter vehicle subsets are defined and their contributions to the total fleet emission are assessed. A new approach, using enrichment factor in cumulative Pareto analysis is proposed for detecting high emitter vehicle subsets within the vehicle fleet. A large dataset (over 94,000 remote-sensing measurements) from five UK-based EDAR (emission detecting and reporting system) field campaigns for the years 2016-17 is used as the test data. In addition to discussions about the high emitter screening criteria, the data analysis procedure and future issues of implementation are discussed. The results show different high emitter trends dependent on the pollutant investigated, and the vehicle type investigated. For example, the analysis indicates that 23 % and 51 % of petrol and diesel cars were responsible for 80 % of NO emissions within that subset of the fleet, respectively. Overall, the contributions of vehicles that account for 80 % of total fleet emissions usually reduce with EURO class improvement, with the subset fleet emissions becoming more homogenous. The high emitter constituent was more noticeable for pollutant PM compared with the other gaseous pollutants, and it was also more prominent for petrol cars when compared to diesel ones.

Non-linearity of secondary pollutant formation estimated from emissions data and measured precursor-secondary pollutant relationships.

In order to predict the impacts of reductions in air pollutant emissions, it is important to know whether secondary pollutant concentrations will decline in direct proportion to the reduction in their precursor, referred to as linearity. Trends in airborne concentrations of nitrate, sulfate, and SOC at sites in southern England are compared with emissions and concentration trends for sulfur dioxide (SO2), oxides of nitrogen (NO x ), and non-methane VOC, and show some increased ratios of concentrations to emissions, strongly suggestive of non-linearity in the primary-secondary pollutant relationships for nitrate, but not the other pollutants. Analysis of a further 20-year dataset from the AGANET network shows a decline of nitrate concentrations significantly lower than that of NO x emissions and ambient NO x concentrations. For sulfate, the decline lies between that of emissions and airborne concentrations of SO2. Back trajectory analysis and Potential Source Contribution Function mapping for 2014-2018 show that the highest concentrations of secondary constituents in southern England are associated with air masses originating in mainland Europe, with 42% of sulfate, 55% of nitrate, and 35% of SOC estimated to be associated with air masses entering the UK from the European mainland.

Understanding Sources and Drivers of Size-Resolved Aerosol in the High Arctic Islands of Svalbard Using a Receptor Model Coupled with Machine Learning.

Atmospheric aerosols are important drivers of Arctic climate change through aerosol-cloud-climate interactions. However, large uncertainties remain on the sources and processes controlling particle numbers in both fine and coarse modes. Here, we applied a receptor model and an explainable machine learning technique to understand the sources and drivers of particle numbers from 10 nm to 20 µm in Svalbard. Nucleation, biogenic, secondary, anthropogenic, mineral dust, sea salt and blowing snow aerosols and their major environmental drivers were identified. Our results show that the monthly variations in particles are highly size/source dependent and regulated by meteorology. Secondary and nucleation aerosols are the largest contributors to potential cloud condensation nuclei (CCN, particle number with a diameter larger than 40 nm as a proxy) in the Arctic. Nonlinear responses to temperature were found for biogenic, local dust particles and potential CCN, highlighting the importance of melting sea ice and snow. These results indicate that the aerosol factors will respond to rapid Arctic warming differently and in a nonlinear fashion.

Contribution of Water-Soluble Organic Matter from Multiple Marine Geographic Eco-Regions to Aerosols around Antarctica.

We present shipborne measurements of size-resolved concentrations of aerosol components across ocean waters next to the Antarctic Peninsula, South Orkney Islands, and South Georgia Island, evidencing aerosol features associated with distinct eco-regions. Nonmethanesulfonic acid Water-Soluble Organic Matter (WSOM) represented 6-8% and 11-22% of the aerosol PM1 mass originated in open ocean (OO) and sea ice (SI) regions, respectively. Other major components included sea salt (86-88% OO, 24-27% SI), non sea salt sulfate (3-4% OO, 35-40% SI), and MSA (1-2% OO, 11-12% SI). The chemical composition of WSOM encompasses secondary organic components with diverse behaviors: while alkylamine concentrations were higher in SI air masses, oxalic acid showed higher concentrations in the open ocean air. Our online single-particle mass spectrometry data exclude a widespread source from sea bird colonies, while the secondary production of oxalic acid and sulfur-containing organic species via cloud processing is suggested. We claim that the potential impact of the sympagic planktonic ecosystem on aerosol composition has been overlooked in past studies, and multiple eco-regions act as distinct aerosol sources around Antarctica.

Real-world assessment of vehicle air pollutant emissions subset by vehicle type, fuel and EURO class: New findings from the recent UK EDAR field campaigns, and implications for emissions restricted zones.

This paper reports upon and analyses vehicle emissions measured by the Emissions Detecting and Reporting (EDAR) system, a Vehicle Emissions Remote Sensing System (VERSS) type device, used in five UK based field campaigns in 2016 and 2017. In total 94,940 measurements were made of 75,622 individual vehicles during the five campaigns. The measurements are subset into vehicle type (bus, car, HGV, minibus, motorcycle, other, plant, taxi, van, and unknown), fuel type for car (petrol and diesel), and EURO class, and particulate matter (PM), nitric oxide (NO) and nitrogen dioxide (NO2) are reported. In terms of recent EURO class emission trends, NO and NOx emissions decrease from EURO 5 to EURO 6 for nearly all vehicle categories. Interestingly, taxis show a marked increase in NO2 emissions from EURO 5 to EURO 6. Perhaps most concerningly is a marked increase in PM emissions from EURO 5 to EURO 6 for HGVs. Another noteworthy observation was that vans, buses and HGVs of unknown EURO class were often the dirtiest vehicles in their classes, suggesting that where counts of such vehicles are high, they will likely make a significant contribution to local emissions. Using Vehicle Specific Power (VSP) weighting we provide an indication of the magnitude of the on-site VERSS bias and also a closer estimate of the regulatory test/on-road emissions differences. Finally, a new 'EURO Updating Potential' (EUP) factor is introduced, to assess the effect of a range of air pollutant emissions restricted zones either currently in use or marked for future introduction. In particular, the effects of the London based Low Emission Zone (LEZ) and Ultra-Low Emissions Zone (ULEZ), and the proposed Birmingham based Clean Air Zone (CAZ) are estimated. With the current vehicle fleet, the impacts of the ULEZ and CAZ will be far more significant than the LEZ, which was introduced in 2008.

Source apportionment of particle number size distribution in urban background and traffic stations in four European cities.

Ultrafine particles (UFP) are suspected of having significant impacts on health. However, there have only been a limited number of studies on sources of UFP compared to larger particles. In this work, we identified and quantified the sources and processes contributing to particle number size distributions (PNSD) using Positive Matrix Factorization (PMF) at six monitoring stations (four urban background and two street canyon) from four European cities: Barcelona, Helsinki, London, and Zurich. These cities are characterised by different meteorological conditions and emissions. The common sources across all stations were Photonucleation, traffic emissions (3 sources, from fresh to aged emissions: Traffic nucleation, Fresh traffic - mode diameter between 13 and 37 nm, and Urban - mode diameter between 44 and 81 nm, mainly traffic but influenced by other sources in some cities), and Secondary particles. The Photonucleation factor was only directly identified by PMF for Barcelona, while an additional split of the Nucleation factor (into Photonucleation and Traffic nucleation) by using NOx concentrations as a proxy for traffic emissions was performed for all other stations. The sum of all traffic sources resulted in a maximum relative contributions ranging from 71 to 94% (annual average) thereby being the main contributor at all stations. In London and Zurich, the relative contribution of the sources did not vary significantly between seasons. In contrast, the high levels of solar radiation in Barcelona led to an important contribution of Photonucleation particles (ranging from 14% during the winter period to 35% during summer). Biogenic emissions were a source identified only in Helsinki (both in the urban background and street canyon stations), that contributed importantly during summer (23% in urban background). Airport emissions contributed to Nucleation particles at urban background sites, as the highest concentrations of this source took place when the wind was blowing from the airport direction in all cities.

Diesel exhaust nanoparticles and their behaviour in the atmosphere.

Diesel engine emissions are by far the largest source of nanoparticles in many urban atmospheres, in which they dominate the particle number count, and may present a significant threat to public health. This paper reviews knowledge of the composition and atmospheric properties of diesel exhaust particles, and exemplifies research in this field through a description of the FASTER project (Fundamental Studies of the Sources, Properties and Environmental Behaviour of Exhaust Nanoparticles from Road Vehicles) which studied the size distribution-and, in unprecedented detail, the chemical composition-of nanoparticles sampled from diesel engine exhaust. This information has been systematized and used to inform the development of computational modules that simulate the behaviour of the largely semi-volatile content of the nucleation mode particles, including consequent effects on the particle size distribution, under typical atmospheric conditions. Large-eddy model studies have informed a simpler characterization of flow around the urban built environment, and include aerosol processes. This modelling and engine-laboratory work have been complemented by laboratory measurements of vapour pressures, and the execution of two field measurement campaigns in London. The result is a more robust description of the dynamical behaviour on the sub-kilometre scale of diesel exhaust nanoparticles and their importance as an urban air pollutant.

Antarctic sea ice region as a source of biogenic organic nitrogen in aerosols.

Climate warming affects the development and distribution of sea ice, but at present the evidence of polar ecosystem feedbacks on climate through changes in the atmosphere is sparse. By means of synergistic atmospheric and oceanic measurements in the Southern Ocean near Antarctica, we present evidence that the microbiota of sea ice and sea ice-influenced ocean are a previously unknown significant source of atmospheric organic nitrogen, including low molecular weight alkyl-amines. Given the keystone role of nitrogen compounds in aerosol formation, growth and neutralization, our findings call for greater chemical and source diversity in the modelling efforts linking the marine ecosystem to aerosol-mediated climate effects in the Southern Ocean.

Source apportionment of wide range particle size spectra and black carbon collected at the airport of Venice (Italy).

Atmospheric particles are of high concern due to their toxic properties and effects on climate, and large airports are known as significant sources of particles. This study investigates the contribution of the Airport of Venice (Italy) to black carbon (BC), total particle number concentrations (PNC) and particle number size distributions (PNSD) over a large range (14 nm-20 µm). Continuous measurements were conducted between April and June 2014 at a site located 110 m from the main taxiway and 300 m from the runway. Results revealed no significantly elevated levels of BC and PNC, but exhibited characteristic diurnal profiles. PNSD were then analysed using both k-means cluster analysis and positive matrix factorization. Five clusters were extracted and identified as midday nucleation events, road traffic, aircraft, airport and nighttime pollution. Six factors were apportioned and identified as probable sources according to the size profiles, directional association, diurnal variation, road and airport traffic volumes and their relationships to micrometeorology and common air pollutants. Photochemical nucleation accounted for ∼44% of total number, followed by road + shipping traffic (26%). Airport-related emissions accounted for ∼20% of total PNC and showed a main mode at 80 nm and a second mode beyond the lower limit of the SMPS (<14 nm). The remaining factors accounted for less than 10% of number counts, but were relevant for total volume concentrations: nighttime nitrate, regional pollution and local resuspension. An analysis of BC levels over different wind sectors revealed no especially significant contributions from specific directions associated with the main local sources, but a potentially significant role of diurnal dynamics of the mixing layer on BC levels. The approaches adopted in this study have identified and apportioned the main sources of particles and BC at an international airport located in area affected by a complex emission scenario. The results may underpin measures for improving local and regional air quality, and health impact assessment studies.

Local and regional components of aerosol in a heavily trafficked street canyon in central London derived from PMF and cluster analysis of single-particle ATOFMS spectra.

Positive matrix factorization (PMF) has been applied to single particle ATOFMS spectra collected on a six lane heavily trafficked road in central London (Marylebone Road), which well represents an urban street canyon. PMF analysis successfully extracted 11 factors from mass spectra of about 700,000 particles as a complement to information on particle types (from K-means cluster analysis). The factors were associated with specific sources and represent the contribution of different traffic related components (i.e., lubricating oils, fresh elemental carbon, organonitrogen and aromatic compounds), secondary aerosol locally produced (i.e., nitrate, oxidized organic aerosol and oxidized organonitrogen compounds), urban background together with regional transport (aged elemental carbon and ammonium) and fresh sea spray. An important result from this study is the evidence that rapid chemical processes occur in the street canyon with production of secondary particles from road traffic emissions. These locally generated particles, together with aging processes, dramatically affected aerosol composition producing internally mixed particles. These processes may become important with stagnant air conditions and in countries where gasoline vehicles are predominant and need to be considered when quantifying the impact of traffic emissions.

Ozone levels in European and USA cities are increasing more than at rural sites, while peak values are decreasing.

Ground-level ozone (O3) levels are usually lower in urban centers than nearby rural sites. To compare trends in O3 levels during the period 1990-2010, we obtained monitoring data from paired urban and rural sites from the European Environment Agency and the US Environmental Protection Agency. Ozone peaks decreased at both station types, with no significant differences between urban and rural stations. Ozone annual averages increased at both urban and rural sites, with a faster rate of increase for urban centers. The overall trend was for convergence between urban and rural O3 data. Ozone levels exceeded the criteria established for the protection of human and vegetation health at both urban and rural sites.

Mass and number size distributions of particulate matter components: comparison of an industrial site and an urban background site.

Size-resolved composition of particulate matter (PM) sampled in the industrial town of Port Talbot (PT), UK was determined in comparison to a typical urban background site in Birmingham (EROS). A Micro-Orifice Uniform Deposit Impactor (MOUDI) sampler was deployed for two separate sampling campaigns with the addition of a Grimm optical spectrometer at the PT site. MOUDI samples were analysed for water-soluble anions (Cl(-), NO3(-) and SO4(2-)) and cations (Na(+), NH4(+), K(+), Mg(2+) and Ca(2+)) and trace metals (Al, V, Cr, Mn, Fe, Cu, Zn, Sb, Ba and Pb). The PM mass distribution showed a predominance of fine particle (PM2.5) mass at EROS whereas the PT samples were dominated by the coarse fraction (PM2.5₋10). SO4(2-), Cl(-), NH4(+), Na(+), NO3(-), and Ca(2+) were the predominant ionic species at both sites while Al and Fe were the metals with highest concentrations at both sites. Mean concentrations of Cl(-), Na(+), K(+), Ca(2+), Mg(2+), Cr, Mn, Fe and Zn were higher at PT than EROS due to industrial and marine influences. The contribution of regional pollution by sulphate, ammonium and nitrate was greater at EROS relative to PT. The traffic signatures of Cu, Sb, Ba and Pb were particularly prominent at EROS. Overall, PM at EROS was dominated by secondary aerosol and traffic-related particles while PT was heavily influenced by industrial activities and marine aerosol. Profound influences of wind direction are seen in the 72-hour data, especially in relation to the PT local sources. Measurements of particle number in 14 separate size bins plotted as a function of wind direction and speed are highly indicative of contributing sources, with local traffic dominant below 0.5 µm, steelworks emissions from 0.5 to 15 µm, and marine aerosol above 15 µm.

Bulk deposition close to a Municipal Solid Waste incinerator: one source among many.

In order to assess the contribution of a Municipal Solid Waste incinerator to the area's total contamination, metals and soluble ions have been determined in bulk deposition collected at sites affected by different levels of plant emissions, according to the results of the Calpuff air dispersion model. Results show that in general fluxes monitored at the different sites during the same period are quite similar for each analyte. Deposition fluxes of nitrite and ammonium are significantly lower at the more distant site, while copper is significantly higher at this site, possibly because of copper fungicide used on the nearby agriculture land. The presence of sea spray and resuspended soil dust can be inferred from Pearson correlation coefficients, while enrichment factors indicate that Cu, Pb and Zn have a probable anthropogenic origin. A more complete evaluation of the sources affecting the area was obtained with PMF analysis. The sources associated with each factor were identified from the source profile and temporal trends. Six factors were identified, three sources associate with natural matrices, while three factors represent anthropogenic sources. The greatest contribution of heavy metals, the most toxic and persistent components determined, is associated with resuspended soil dust, especially when weighted according to their toxicity. The anthropogenic source contribution is similar at all sites, and therefore the incinerator's relative contribution to the total pollutant load appears to be negligible compared to other sources affecting the area.