Effects of Engineered Wettability on the Efficiency of Dew Collection.

Surface wettability plays an important role in dew collection. Nucleation is faster on hydrophilic surfaces, while droplets slide more readily on hydrophobic surfaces. Plants and animals in coastal desert environments appear to overcome this trade-off through biphilic surfaces with patterned wettability. In this study, we investigate the effects of millimeter-scale wettability patterns, mimicking those of the Stenocara beetle, on the rate of water collection from humid air. The rate of water collection per unit area is measured as a function of subcooling (ΔT = 1, 7, and 27 °C) and angle of inclination (from 10° to 90°). It is then compared for superbiphilic, hydrophilic, hydrophobic, and surperhydrophobic surfaces. For large subcooling, neither wettability nor tilt angle has a significant effect because the rate of condensation is so great. For 1 °C subcooling and large angles, hydrophilic surfaces perform best because condensation is the rate-limiting step. For low angles of inclination, superhydrophobic samples are best because droplet sliding is the rate-limiting step. Superbiphilic surfaces, in contrast to their superior fog collecting capabilities, generally collected dew at the slowest rate due to their inherent contact angle hysteresis. Theoretical considerations suggest that this finding may apply more generally to surfaces with patterned wettability.

Solid Lipid Nanoparticles (SLNs) for Intracellular Targeting Applications.

Nanoparticle-based delivery vehicles have shown great promise for intracellular targeting applications, providing a mechanism to specifically alter cellular signaling and gene expression. In a previous investigation, the synthesis of ultra-small solid lipid nanoparticles (SLNs) for topical drug delivery and biomarker detection applications was demonstrated. SLNs are a well-studied example of a nanoparticle delivery system that has emerged as a promising drug delivery vehicle. In this study, SLNs were loaded with a fluorescent dye and used as a model to investigate particle-cell interactions. The phase inversion temperature (PIT) method was used for the synthesis of ultra-small populations of biocompatible nanoparticles. A 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenylphenyltetrazolium bromide (MTT) assay was utilized in order to establish appropriate dosing levels prior to the nanoparticle-cell interaction studies. Furthermore, primary human dermal fibroblasts and mouse dendritic cells were exposed to dye-loaded SLN over time and the interactions with respect to toxicity and particle uptake were characterized using fluorescence microscopy and flow cytometry. This study demonstrated that ultra-small SLNs, as a nanoparticle delivery system, are suitable for intracellular targeting of different cell types.

Synergy between Galvanic Protection and Self-Healing Paints.

Painting is a cost-effective technique to delay the onset of corrosion in metals. However, the protection is only temporary, as corrosion begins once the coating becomes scratched. Thus, an increasingly common practice is to add microencapsulated chemical agents to paint in order to confer self-healing capabilities. The additive's ability to protect the exposed surface from corrosion depends upon (i) how long the chemical agent takes to spread across the exposed metal; (ii) how long the agent takes to form an effective barrier layer; and (iii) what happens to the metal surface before the first two steps are complete. To understand this process, we first synthesized 23 ± 10 µm polyurea microcapsules filled with octadecyltrimethoxysilane (OTS), a liquid self-healing agent, and added them to a primer rich in zinc, a cathodic protection agent. In response to coating damage, the microcapsules release OTS into the scratch and initiate the self-healing process. By combining electrochemical impedance spectroscopy, chronoamperometry, and linear polarization techniques, we monitored the progress of self-healing. The results demonstrate how on-demand chemical passivation works synergistically with the cathodic protection: zinc preserves the surface long enough for self-healing by OTS to reach completion, and OTS prolongs the lifetime of cathodic protection.

Robust composite-shell microcapsules via pickering emulsification.

Microencapsulation technology has been increasingly applied toward the development of self-healing paints. Added to paint as a dry powder prior to spraying, the microcapsules store a liquid that can repair the protective barrier layer if released into a scratch. However, self-healing will not occur unless the microcapsules can withstand spray-painting, aggressive solvents in the paint, and long-term exposure to the elements. We have therefore developed a one-pot synthesis for the production of Pickering microcapsules with outstanding strength, solvent resistance, and barrier properties. Octadecyltrimethoxysilane-filled (OTS) microcapsules form via standard interfacial polycondensation, except that silica nanopowder (10-20 nm diameter) replaces the conventional surfactant or hydrocolloid emulsifier. Isophorone diisocyanate (IPDI) in the OTS core reacts with diethylenetriamine, polyethylenimine, and water to form a hard polymer shell along the interface. Compared to pure polyurea, the silica-polyurea composite improves the shelf life of the OTS by 10 times. The addition of SiO2 prevents leaching of OTS into xylenes and hexanes for up to 80 days, and the resulting microcapsules survive nebulization through a spray gun at 620 kPa in a 500 cSt fluid.

Colloidal polymers from dipolar assembly of cobalt-tipped CdSe@CdS nanorods.

The synthesis of a modular colloidal polymer system based on the dipolar assembly of CdSe@CdS nanorods functionalized with a single cobalt nanoparticle "tip" (CoNP-tip) is reported. These heterostructured nanorods spontaneously self-assembled via magnetic dipolar associations of the cobalt domains. In these assemblies, CdSe@CdS nanorods were carried as densely grafted side chain groups along the dipolar NP chain to form bottlebrush-type colloidal polymers. Nanorod side chains strongly affected the conformation of individual colloidal polymer bottlebrush chains and the morphology of thin films. Dipolar CoNP-tipped nanorods were then used as "colloidal monomers" to form mesoscopic assemblies reminiscent of traditional copolymers possessing segmented and statistical compositions. Investigation of the phase behavior of colloidal polymer blends revealed the formation of mesoscopic phase separated morphologies from segmented colloidal copolymers. These studies demonstrated the ability to control colloidal polymer composition and morphology in a manner observed for classical polymer systems by synthetic control of heterostructured nanorod structure and harnessing interparticle dipolar associations.

Liquid-filled metal microcapsules.

A moisture-sensitive diisocyanate liquid is microencapsulated within a metal shell measuring less than 2 µm thick and 50 µm in diameter. This mild synthesis takes place through a series aqueous processing steps that occur at or near room temperature. Through a combination of emulsification, interfacial polymerization, and electroless plating, one can microencapsulate moisture- or air-sensitive chemicals within a metal seal. The liquid-filled metal microcapsules promise a number of advantages compared to conventional polymeric microencapsulation, including improved mechanical properties and improved barrier properties to gases and organic molecules.

Characterization of a proton pumping transmembrane protein incorporated into a supported three-dimensional matrix of proteoliposomes.

Surface analytical tools have gained interest in the bioanalytical field during recent years because they offer the possibility of more detailed investigations of biomolecular interactions. To be able to use such tools, the biomolecules of interest must be immobilized to a surface in a functioning way. For small water-soluble biomolecules, the surface immobilization is quite straightforward, but it has been shown to be difficult for large transmembrane proteins. In those cases, the solid surface often has a negative influence on the function of the transmembrane proteins. In this article, we present a new approach for surface immobilization of transmembrane proteins where the proteins were immobilized on a surface in a proteoliposome multilayer structure. The surface-binding events and the structure of the surface-immobilized proteoliposomes were monitored using both the quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR) techniques. With this multilayer proteoliposome structure, it was possible to detect trypsin digestion of the transmembrane protein proton translocating nicotinamide nucleotide transhydrogenase in real time using SPR. The results from the combined SPR and QCM-D analysis were confirmed by fluorescence microscopy imaging of the multilayer structure and activity measurements of transhydrogenase. These results showed that the activity of transhydrogenase was significantly decreased in the bottom layer, but in the subsequent proteoliposome layers 90% of the activity was retained compared with bulk measurements. These results emphasize the importance of an immobilization strategy where the transmembrane proteins are lifted off the solid surface at the same time as the amount of protein is increased. We consider this new method for surface immobilization of transmembrane proteins to meet these demands and that the method will improve the possibility to use a variety of surface analytical tools for the analysis of interactions involving transmembrane proteins in the future.

Field induced formation of mesoscopic polymer chains from functional ferromagnetic colloids.

The assembly and direct imaging of ferromagnetic nanoparticles into one-dimensional mesostructures (1-D) are reported. Polymer-coated ferromagnetic colloids (19 nm, 24 nm) were assembled at a crosslinkable oil-water interface under both magnetic field induced and zero-field conditions and permanently fixed into 1-D mesoscopic polymer chains (1-9 mum) in a process referred to as Fossilized Liquid Assembly (FLA). In the FLA process, nanoparticle chains were fixed at the oil interface through photopolymerization, enabling direct visualization of organized mesostructures using atomic force microscopy. Using the FLA methodology, we systematically investigated different conditions and demonstrated that dispersed ferromagnetic colloids possess sufficient dipolar interactions to organize into mesoscopic assemblies. Application of an external magnetic field during assembly enabled the formation of micron-sized chains which were aligned in the direction of the applied field. This universal methodology is an attractive alternative technique to cryogenic transmission electron microscopy (cryo-TEM) for the visualization of nanoparticle assembly in dispersed organic media.

DHA-induced changes of supported lipid membrane morphology.

Docosahexaenoic acid (DHA) is a polyunsaturated long fatty acid known to have fundamental effects on cell membrane function. Here, the effect of DHA on phosphocholine-supported lipid bilayers was measured using the quartz crystal microbalance with dissipation monitoring (QCM-D) technique. Above a concentration of 60 muM (i.e., near the critical micelle concentration), DHA had drastic effects on the viscoelastic properties of the supported membranes, suggesting a more complex process and structure than simple insertion of molecules in the bilayer. Fluorescence microscopy revealed the spontaneous formation of elongated out-growths from the bilayers, which were remarkable for their length ( approximately 100 mum) and extensive coverage of the surface. These results demonstrate the applicability of QCM-D as a method to screen for conditions where membrane remodeling occurs but also that complementary techniques are required to describe in more detail the changes in viscoelastic properties of the membrane. These results are highly relevant for the present rapid development in the field of model lipid membranes aiming toward increased knowledge about processes occurring at biological surfaces.

Photocurable oil/water interfaces as a universal platform for 2-D self-assembly.

We present a novel platform, dubbed fossilized liquid assembly, for the creation of 2-D assemblies from nanoscale building blocks. The system consists of an oil/water interface in which the oil phase can be flash-cured upon UV exposure. The photopolymerizable material, 1,12-dodecanediol dimethacrylate, solidifies in as little as 1 s when exposed to UV light. The rapid cross-linking allows one to obtain a "snapshot" of the assembly process for particles that segregate to the oil/water interface. Among the particles investigated were nonpolar 0.39 microm poly(methyl methacrylate) latex spheres, nonpolar 10 microm polystyrene latex spheres, highly polarizable 5 nm Au nanocrystals, dipolar 10 nm CdTe quantum dots, and magnetic 25 nm magnetite nanoparticles. The aggregates formed by this process were typically either globular or fractal in appearance. By comparing with simulation, we can perform quantitative image analysis on the resulting micrographs to define a rigorous set of standards for distinguishing among the main classes of aggregation: flocculation, equilibrium phase separation, and true self-assembly.

Light-regulated release of liposomes from phospholipid membranes via photoresponsive polymer-DNA conjugates.

A method for releasing tethered liposomes from a supported lipid bilayer in response to a light stimulus is described. The tethering is accomplished through the hybridization of end-functionalized DNA that resides on both the supported lipid bilayer and liposome surfaces. Normally consisting of cholesterol or lipid tails, the end group is replaced in this study by a photoresponsive polymer that partitions into lipid bilayers at physiological pH. When exposed to UV light, it undergoes excited state proton transfer with water. The ensuing increase in polarity increases the solubility of the polymer in the aqueous phase. Quartz crystal microbalance with dissipation monitoring (QCM-D) and fluorescence microscopy have been used to record both the construction of the vesicle assembly and the subsequent response to UV light. It is found that the critical flow rate for vesicle release is reduced when buffer flow is performed in conjunction with UV exposure.