Smartphone IMU Sensors for Human Identification through Hip Joint Angle Analysis.

Gait monitoring using hip joint angles offers a promising approach for person identification, leveraging the capabilities of smartphone inertial measurement units (IMUs). This study investigates the use of smartphone IMUs to extract hip joint angles for distinguishing individuals based on their gait patterns. The data were collected from 10 healthy subjects (8 males, 2 females) walking on a treadmill at 4 km/h for 10 min. A sensor fusion technique that combined accelerometer, gyroscope, and magnetometer data was used to derive meaningful hip joint angles. We employed various machine learning algorithms within the WEKA environment to classify subjects based on their hip joint pattern and achieved a classification accuracy of 88.9%. Our findings demonstrate the feasibility of using hip joint angles for person identification, providing a baseline for future research in gait analysis for biometric applications. This work underscores the potential of smartphone-based gait analysis in personal identification systems.

Exoskeletons vs. exosuits: A comparative analysis using biological-based computer simulation.

BACKGROUND: Interest in the design of gait assistance devices has experienced significant growth in recent years. Among various uses of assistive devices, those aimed at supporting the elderly have gained importance due to the rising population of this age group. METHODS: This study aims to compare the efficacy of two types of assistive devices through musculoskeletal simulations. One case is an ideal device, simulating the motor actuation as it would be in a rigid exoskeleton, and, cable-assisted devices, simulating the assistance of an exosuit. The simulations were based on data obtained from 9 subjects. OpenSim, an open-source software, was employed to conduct the simulations. RESULTS: Our findings indicate that the cable-assisted device outperforms the traditional exoskeleton by achieving a more significant reduction in the metabolic cost with relatively lower assistance power. CONCLUSION: Cable-assisted gait assistance devices have shown comparable results to traditional exoskeletons, with the added advantage of improved performance through reduced power requirements.

Sensing and Control Strategies for a Synergy-Based, Cable-Driven Exosuit via a Modular Test Bench.

Ageing results in the eventual loss of muscle mass and strength, joint problems, and overall slowing of movements, with a greater risk of suffering falls or other such accidents. The use of gait assistance exoskeletons can help in the active aging of this segment of the population. Given the user specificity of the mechanics and control these devices need, the facility used to test different design parameters is indispensable. This work deals with the modeling and construction of a modular test bench and prototype exosuit to test different mounting and control schemes for a cable-driven exoskeleton or exosuit. The test bench allows the experimental implementation of postural or kinematic synergies to assist multiple joints by using only one actuator and the optimization of the control scheme to better adapt to the characteristics of the specific patient. The design is open to the research community and it is expected to improve the design of cable-driven systems for exosuits.

Force and Torque Characterization in the Actuation of a Walking-Assistance, Cable-Driven Exosuit.

Soft exosuits stand out when it comes to the development of walking-assistance devices thanks to both their higher degree of wearability, lower weight, and price compared to the bulkier equivalent rigid exoskeletons. In cable-driven exosuits, the acting force is driven by cables from the actuation system to the anchor points; thus, the user's movement is not restricted by a rigid structure. In this paper, a 3D inverse dynamics model is proposed and integrated with a model for a cable-driven actuation to predict the required motor torque and traction force in cables for a walking-assistance exosuit during gait. Joint torques are to be shared between the user and the exosuit for different design configurations, focusing on both hip and ankle assistance. The model is expected to guide the design of the exosuit regarding aspects such as the location of the anchor points, the cable system design, and the actuation units. An inverse dynamics analysis is performed using gait kinematic data from a public dataset to predict the cable forces and position of the exosuit during gait. The obtained joint reactions and cable forces are compared with those in the literature, and prove the model to be accurate and ready to be implemented in an exosuit control scheme. The results obtained in this study are similar to those found in the literature regarding the walking study itself as well as the forces under which cables operate during gait and the cable position cycle.

Actuation Strategies for a Wearable Cable-Driven Exosuit Based on Synergies in Younger and Older Adults.

Older adults (aged 55 years and above) have greater difficulty carrying out activities of daily living than younger adults (aged 25−55 years). Although age-related changes in human gait kinetics are well documented in qualitative terms in the scientific literature, these differences may be quantified and analyzed using the analysis of motor control strategies through kinetic synergies. The gaits of two groups of people (older and younger adults), each with ten members, were analyzed on a treadmill at a constant controlled speed and their gait kinetics were recorded. The decomposition of the kinetics into synergies was applied to the joint torques at the hip, knee, and ankle joints. Principal components determined the similarity of the kinetic torques in the three joints analyzed and the effect of the walking speed on the coordination pattern. A total of three principal components were required to describe enough information with minimal loss. The results suggest that the older group showed a change in coordination strategy compared to that of the younger group. The main changes were related to the ankle and hip torques, both showing significant differences (p-value <0.05) between the two groups. The findings suggest that the differences between the gait patterns of the two groups were closely related to a reduction in ankle torque and an increase in hip torque. This change in gait pattern may affect the rehabilitation strategy used when designing general-purpose rehabilitation devices or rehabilitation/training programs for the elderly.

Design of the Cooperative Actuation in Hybrid Orthoses: A Theoretical Approach Based on Muscle Models.

Hybrid orthoses or rehabilitation exoskeletons have proven to be a powerful tool for subjects with gait disabilities due to their combined use of electromechanical actuation to provide motion and support, and functional electrical stimulation (FES) to contract muscle tissue so as to improve the rehabilitation process. In these devices, each degree of freedom is governed by two actuators. The main issue arises in the design of the two actuation profiles for there to be natural or normative gait motion in which the two actuators are transparent to each other. Hybrid exoskeleton control solutions proposed in the literature have been based on tracking the desired kinematics and applying FES to maintain the desired motion rather than to attain the values expected for physiological movement. This work proposes a muscle-model approach involving inverse dynamics optimization for the design of combined actuation in hybrid orthoses. The FES profile calculated in this way has the neurophysiological meaningfulness for the device to be able to fulfill its rehabilitative purpose. A general scheme is proposed for a hybrid hip-knee-ankle-foot orthosis. The actuation profiles, when muscle tissue is fatigued due to FES actuation are analyzed, and an integrated approach is presented for estimating the actuation profiles so as to overcome muscle peak force reduction during stimulation. The objective is to provide a stimulation profile for each muscle individually that is compatible with the desired kinematics and actuation of the orthosis. The hope is that the results may contribute to the design of subject-specific rehabilitation routines with hybrid exoskeletons, improving the exoskeleton's actuation while maintaining its rehabilitative function.