The tetracyanoborate anion as a building block for the heterocubane cluster cage [Cr4{B(CN)4}4]4.

The tetracyanoborate anion [B(CN)4]- (TCB) was utilized as a building block for the synthesis of polynuclear chromium carbonyl compounds upon photolytic reaction with [Cr(CO)6]. Up to four κN-coordinated cyano groups of TCB can be involved in binding to chromium, giving mixtures of [B(CN)4-x{CN-Cr(CO)5}x]- (x = 1-4; 1-4) and [{Cr(CO)4(B(CN)4)}2]2- (5). The reaction of [B(CN)4]- with fac-[Cr(CO)3(MeCN)3] led to isolation of salts of the tetraanionic heterocubane cage [{Cr(CO)3(B(CN)4)}4]4-.

Full Electron Delocalization across the Cluster in 1,12-bisBMes2-p-carborane Radical Anion.

Conjugation between three-dimensional (3D) carboranes and the attached substituents is commonly believed to be very weak. In this paper, we report that reducing 1,12-bis(BMes2)-p-carborane (B2pCab) with one electron gives a radical anion with a centrosymmetric semiquinoidal structure. This radical anion shows extensive electron delocalization between the two boron centers over the p-carborane bridge due to the overlap of carborane lowest unoccupied molecular orbital (LUMO) and the BMes2 LUMO. Unlike dianions of other C2B10H12 carboranes, which rearrange to a nido-form, two-electron reduction of B2pCab leads to a rearrangement into a basket-shaped intermediate.

A-Frame-Templated High-Coordinate Platinum(IV) cis-Bis(boryl) Complexes.

The addition of Et2O·BF3 or Me2S·BCl3 to the BNBN-cumulene-bridged Pt(II) A-frame complexes [(µ-1,1-BNBN(TMS)2)(µ-dmpm)2Pt2X2] (TMS = SiMe3, dmpm = CH2(PMe2)2, X = Br 1Br, I 1I) resulted in the oxidative addition of one B-F or B-Cl bond, respectively, to the internal BN bond of the bridging, iminoborane-like B-N≡B-N moiety, and coordination of one Pt(II) center to the resulting adjacent BF2 (complex 2Br-F) or BCl2 (complexes 2Br-Cl and 2I-Cl) moiety, respectively. X-ray crystallographic and multinuclear NMR-spectroscopic data show that the Pt→BF2 interaction in 2Br-F is very weak and merely electrostatic, while the Pt→BCl2 interaction in 2Br-Cl and 2I-Cl is a stronger donor-acceptor bond. In contrast, the reaction of Me2S·BBr3 with 1Br yielded a ca. 3:2 mixture of the analogous B-Br addition product to the iminoborane, 2Br-Br, and the product of a subsequent oxidative addition of one B-Br bond of the chelating BBr2 moiety to the adjacent platinum center, the mixed-valence boranediyl-bridged, Pt(II)-Pt(IV)-bromoboryl complex 3-Br5. The analogous reactions of Me2S·BI3 with 1Br and Me2S·BBr3 with 1I yielded complex product mixtures of Pt(II)-Pt(II)-borane (2Br-I and 2I-Br, respectively) and Pt(II)-Pt(IV)-boryl complexes (3-BrnI5-n, n = 1-3) analogous to 2X-Y and 3-Br5, respectively, the proportion of the latter increasing with the proportion of iodide in the precursor mixture. Both multinuclear NMR-spectroscopic and X-ray crystallographic data show evidence of complex and extensive inter- and intramolecular bromide-iodide exchanges between the soft, iodide-affine platinum centers and the harder, more bromide-affine boron centers. A clue to the mechanism of these halide exchanges is provided by the reactions of BBr2Ar (Ar = 2,4,6-Me3C6H2 (Mes), 2,3,5,6-Me4C6H (Dur)) with 1Br, which yielded the cationic Pt(II)-Pt(II)-borenium analogues of 2Br-Br, the complexes 4Br-Ar, generated by the sterics-induced displacement of the bromide substituent from the chelating Pt→BBrAr moiety, and displaying a rare metal→borenium donor-acceptor bond.

Optical and Electrical Properties of A3[VS4] (A = Na, K) Synthesized via a Straightforward and Scalable Solid-State Method.

Two literature-known sulfido vanadates, Na3[VS4] and K3[VS4], were obtained through a straightforward and scalable synthetic method. Highly crystalline powders of both compounds were obtained from the homogeneous molten phases of starting materials via a─comparably rapid─solid-state technique. Low-temperature structure determination, ambient temperature powder diffraction, and solid-state NMR spectroscopy verify previous structural reports and indicate purity of the obtained samples. Both compounds show semiconductivity with the optical band gap values in the range of 2.1 to 2.3 eV. Experimental values of the ionic conductivity and dielectric constants are σ = 2.41·10-5 mS·cm-1, k = 76.52 and σ = 1.36·10-4 mS·cm-1, k = 103.67 at ambient temperature for Na3[VS4] and K3[VS4], respectively. It is demonstrated that Na3[VS4] depicts second-order nonlinear optical properties, i.e., second harmonic generation over a broad wavelength spectrum. The results introduce new aspects of sulfido vanadates as multifunctional candidates for potential optical and electrical applications.

All-Inorganic sp-Chain Ligands: Isoelectronic B/N Analogues of E. O. Fischer's Alkynylcarbynes.

Borylation of a tungsten-bound N2 ligand and halide abstraction provides access to a cationic complex with an unprecedented linear NNBR ligand. This complex undergoes [3+2] cycloaddition with azides, and an unexpected chain-extension reaction with an iminoborane, leading to a complex with a five-atom B/N chain. These two [NNBR]-containing complexes, inorganic analogues of E. O. Fischer's alkynylcarbynes, are very rare examples of molecules containing all-inorganic chains of sp-hybridized atoms.

Optically induced charge-transfer in donor-acceptor-substituted p- and m- C2B10H12 carboranes.

Icosahedral carboranes, C2B10H12, have long been considered to be aromatic but the extent of conjugation between these clusters and their substituents is still being debated. m- and p-Carboranes are compared with m- and p-phenylenes as conjugated bridges in optical functional chromophores with a donor and an acceptor as substituents here. The absorption and fluorescence data for both carboranes from experimental techniques (including femtosecond transient absorption, time-resolved fluorescence and broadband fluorescence upconversion) show that the absorption and emission processes involve strong intramolecular charge transfer between the donor and acceptor substituents via the carborane cluster. From quantum chemical calculations on these carborane systems, the charge transfer process depends on the relative torsional angles of the donor and acceptor groups where an overlap between the two frontier orbitals exists in the bridging carborane cluster.

Synthesis and Reactivity of a Dialane-Bridged Diradical.

Radicals of the lightest group 13 element, boron, are well established and observed in numerous forms. In contrast to boron, radical chemistry involving the heavier group 13 elements (aluminum, gallium, indium, and thallium) remains largely underexplored, primarily attributed to the formidable synthetic challenges associated with these elements. Herein, we report the synthesis and isolation of planar and twisted conformers of a doubly CAAC (cyclic alkyl(amino)carbene)-radical-substituted dialane. Extensive characterization through spectroscopic analyses and X-ray crystallography confirms their identity, while quantum chemical calculations support their open-shell nature and provide further insights into their electronic structures. The dialane-connected diradicals exhibit high susceptibility to oxidation, as evidenced by electrochemical measurements and reactions with o-chloranil and a variety of organic azides. This study opens a previously uncharted class of dialuminum systems to study, broadening the scope of diradical chemistry and its potential applications.

Boron Insertion into the N≡N Bond of a Tungsten Dinitrogen Complex.

The 1,3-addition of 1,2-diaryl-1,2-dibromodiboranes (B2Br2Ar2) to trans-[W(N2)2(dppe)2] (dppe = κ2-(Ph2PCH2)2), which is accompanied by a Br-Ar substituent exchange between the two boron atoms, is followed by a spontaneous rearrangement of the resulting tungsten diboranyldiazenido complex to a 2-aza-1,3-diboraallenylimido complex displaying a linear, cumulenic B=N=B moiety. This rearrangement involves the splitting of both the B-B and N=N bonds of the N2B2 ligand, formal insertion of a BAr boranediyl moiety into the N=N bond, and coordination of the remaining BArBr boryl moiety to the terminal nitrogen atom. Density functional theory calculations show that the reaction proceeds via a cyclic NB2 intermediate, followed by dissociation into a tungsten nitrido complex and a linear boryliminoborane, which recombine by adduct formation between the nitrido ligand and the electron-deficient iminoborane boron atom. The linear B=N=B moiety also undergoes facile 1,2-addition of Brønsted acids (HY = HOPh, HSPh, and H2NPh) with concomitant Y-Br substituent exchange at the terminal boron atom, yielding cationic (borylamino)borylimido tungsten complexes.

Synthesis of Partially Fluorinated Alkyl Triflates by Electrochemical Fluorination (Simons Process).

A scalable straightforward synthesis of monofluoro- and difluoromethyl triflate CF3 SO2 OCH2 F (MH2F ) and CF3 SO2 OCHF2 (MHF2 ) through electrochemical fluorination (ECF, Simons process) of methyl triflate MH3 in anhydrous hydrogen fluoride at nickel anodes is presented. The ECF method is also feasible for the preparation of the deuterated analogues CF3 SO2 OCD2 F (MD2F ) and CF3 SO2 OCDF2 (MD2F ). Surprisingly, no H/D exchange occurs during ECF of CF3 SO2 OCD3 (MD3 ); this provides further evidence for a NiF3 /NiF4 -mediated ECF mechanism. The ECF of selected partially fluorinated ethyl triflates is described, and electrochemical fluorination of CF3 SO2 OCH2 CF3 (EH2F3 ) leads to the until now unknown chiral CF3 SO2 OCHFCF3 (EHFF3 ). The analogous fluoromethyl and fluoroethyl nonaflates are also accessible by ECF. This study contains detailed spectroscopic, structural, and thermal data on (fluoro)methyl and fluoro(ethyl) triflates.

Alkylcyanoborate Anions: Building Blocks for Fluorine-Free Low-Viscosity, Electrochemically and Thermally Stable Ionic Liquids.

A set of mixed-substituted potassium alkylcyano- and alkylcyanofluoroborates has been synthesized using easily accessible starting compounds and characterized by elemental analysis, NMR and vibrational spectroscopy, and mass spectrometry. In addition, single-crystal structures of salts of the cyanoborate anions have been derived from X-ray diffraction experiments. The 1-ethyl-3-methylimidazolium room temperature ionic liquids ([EMIm]+ -RTILs) with the new borate anions have been synthesized and their physicochemical properties, that is, high thermal and electrochemical stability, low viscosity, and high conductivity, have been compared to the properties of related [EMIm]+ -RTILs. The influence of the different alkyl substituents at boron has been assessed. The exemplary study on the properties with the [EMIm]+ -ILs with the mixed water stable alkylcyanoborate anions points towards the potential of these fluorine-free borate anions, in general.

Structure and Electronics of a Series of CAAC-Stabilized Diboron-Doped Acenes from 1,4-Diboranaphthalene to 6,13-Diborapentacene.

This combined experimental and theoretical study examines the influence of acene elongation, boron atom position, and acene substitution pattern on the structure and electronics of cyclic alkyl(amino)carbene (CAAC)-stabilized diboraacenes and presents the first syntheses of neutral diboranaphthalene (DBN) and diborapentacene (DBP). Whereas 2,3-diethyl-substituted 1,4-(CAAC)2-Et2DBN is isolated as a mixture of a planar (structurally characterized) NMR-active conformer and a presumably bent EPR-active conformer, 6,13-(CAAC)2-DBP resembles 9,10-(CAAC)2-DBA (DBA = diboraanthracene), with a highly puckered 6,13-DBP core and a typical biradical EPR signal. Both species are easily reduced to their puckered dianions. DFT calculations confirm that 6,13-(CAAC)2-DBP is only stable in its bent conformation, whereas 1,4-(CAAC)2-Et2DBN exists as both flat closed-shell and bent open-shell biradical conformers, which interchange by thermally activated ethyl and CAAC rotation/diboraacene bending processes. An in-depth computational study of the series of unsubstituted, CAAC-stabilized, symmetrically diboron-doped acenes from 1,4-(CAAC)2-DBN to 6,13-(CAAC)2-DBP was carried out. The results show interesting trends dependent on the position of the boron atoms within the acene framework as well as on the relative orientation of the CAAC ligands, which enable fine-tuning of the electronic and structural features.

Solution and solid-state studies of hydrogen and halogen bonding with N-heterocyclic carbene supported nickel(II) fluoride complexes.

Nickel fluoride complexes of the type [Ni(F)(L)2(ArF)] (L = phosphine, ArF = fluorinated arene) are well-known to form strong halogen and hydrogen bonds in solution and in the solid state. A comprehensive study of such non-covalent interactions using bis(carbene) complexes as acceptors and suitable halogen and hydrogen bond donors is presented. In solution, the complex [Ni(F)(iPr2Im)2(C6F5)] forms halogen and hydrogen bonds with iodopentafluorobenzene and indole, respectively, which have formation constants (K300) an order of magnitude greater than those of structurally related phosphine supported nickel fluorides. Co-crystallisation of this complex and its backbone-methylated analogue [Ni(F)(iPr2Me2Im)2(C6F5)] with 1,4-diiodotetrafluorobenzene produces halogen bonding adducts which were characterised by X-ray analysis and 19F MAS solid state NMR analysis. Differences in the chemical shifts between the nickel fluoride and its halogen bonding adduct are well in line with data that were obtained from titration studies in solution.

Insights into structure-property relationships in ionic liquids using cyclic perfluoroalkylsulfonylimides.

Room temperature ionic liquids of cyclic sulfonimide anions ncPFSI (ring size: n = 4-6) with the cations [EMIm]+ (1-ethyl-3-methylimidazolium), [BMIm]+ (1-butyl-3-methylimidazolium) and [BMPL]+ (BMPL = 1-butyl-1-methylpyrrolidinium) have been synthesized. Their solid-state structures have been elucidated by single-crystal X-ray diffraction and their physicochemical properties (thermal behaviour and stability, dynamic viscosity and specific conductivity) have been assessed. In addition, the ion diffusion was studied by pulsed field gradient stimulated echo (PFGSTE) NMR spectroscopy. The decisive influence of the ring size of the cyclic sulfonimide anions on the physicochemical properties of the ILs has been revealed. All ILs show different properties compared to those of the non-cyclic TFSI anion. While these differences are especially distinct for ILs with the very rigid 6cPFSI anion, the 5-membered ring anion 5cPFSI was found to result in ILs with relatively similar properties. The difference between the properties of the TFSI anion and the cyclic sulfonimide anions has been rationalized by the rigidity (conformational lock) of the cyclic sulfonimide anions. The comparison of selected IL properties was augmented by MD simulations. These highlight the importance of π+-π+ interactions between pairs of [EMIm]+ cations in the liquid phase. The π+-π+ interactions are evident for the solid state from the molecular structures of the [EMIm]+-ILs with the three cyclic imide anions determined by single-crystal X-ray diffraction.

Amber Light Control of Peptide Secondary Structure by a Perfluoroaromatic Azobenzene Photoswitch.

The incorporation of photoswitches into the molecular structure of peptides and proteins enables their dynamic photocontrol in complex biological systems. Here, a perfluorinated azobenzene derivative triggered by amber light was site-specifically conjugated to cysteines in a helical peptide by perfluoroarylation chemistry. In response to the photoisomerization (trans→cis) of the conjugated azobenzene with amber light, the secondary structure of the peptide was modulated from a disorganized into an amphiphilic helical structure.

Activation of Ge-H and Sn-H Bonds with N-Heterocyclic Carbenes and a Cyclic (Alkyl)(amino)carbene.

A study of the reactivity of several N-heterocyclic carbenes (NHCs) and the cyclic (alkyl)(amino)carbene 1-(2,6-di-iso-propylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene (cAACMe ) with the group 14 hydrides GeH2 Mes2 and SnH2 Me2 (Me=CH3 , Mes=1,3,5-(CH3 )3 C6 H2 ) is presented. The reaction of GeH2 Mes2 with cAACMe led to the insertion of cAACMe into one Ge-H bond to give cAACMe H-GeHMes2 (1). If 1,3,4,5-tetramethyl-imidazolin-2-ylidene (Me2 ImMe ) was used as the carbene, NHC-mediated dehydrogenative coupling occurred, which led to the NHC-stabilized germylene Me2 ImMe ⋅GeMes2 (2). The reaction of SnH2 Me2 with cAACMe also afforded the insertion product cAACMe H-SnHMe2 (3), and reaction of two equivalents Me2 ImMe with SnH2 Me2 gave the NHC-stabilized stannylene Me2 ImMe ⋅SnMe2 (4). If the sterically more demanding NHCs Me2 ImMe , 1,3-di-isopropyl-4,5-dimethyl-imidazolin-2-ylidene (iPr2 ImMe ) and 1,3-bis-(2,6-di-isopropylphenyl)-imidazolin-2-ylidene (Dipp2 Im) were employed, selective formation of cyclic oligomers (SnMe2 )n (5; n=5-8) in high yield was observed. These cyclic oligomers were also obtained from the controlled decomposition of cAACMe H-SnHMe2 (3).

Highly Strained Arene-Fused 1,2-Diborete Biradicaloid.

The stepwise reduction of a doubly cyclic alkyl(amino)carbene (CAAC)-stabilized 2,3-bis(dibromoboryl)naphthalene enables the isolation of the corresponding mono- and bis(boryl) radicals (one- and two-electron reduction), a 2π-aromatic 1,2-diborete (four-electron reduction), which shows biradical character in the solid-state EPR spectrum, and its cyclic bis(alkylidene)diboron dianion (six-electron reduction). The X-ray crystallographic analysis of the diborete shows a highly strained and twisted four-membered ring with a formal cis-diborene motif featuring a very elongated B-B double bond. Calculations based on DFT and multireference approaches reveal that the diborete possesses an open-shell singlet biradicaloid ground state, which is slightly energetically preferred to its EPR-active triplet-state congener. The addition of CO to the diborete resulted in B-B bond splitting and the formation of the corresponding closed-shell singlet, doubly Lewis base-stabilized bis(borylene), whereas a twofold γ insertion of phenyl azide generates a 1,3-bis(diazenyl)-1,3,2,4-diazadiboretidine.

N-heterocyclic carbene and cyclic (alkyl)(amino)carbene adducts of plumbanes and plumbylenes.

Lewis-acid/base adducts of N-heterocyclic carbenes (NHCs) and the cyclic (alkyl)(amino)carbene cAACMe (1-(2,6-di-iso-propylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene) with selected lead(II) and lead(IV) compounds are presented. The reaction of the NHCs Me2ImMe (1,3,4,5-tetramethyl-imidazolin-2-ylidene), iPr2ImMe (1,3-di-isopropyl-4,5-dimethyl-imidazolin-2-ylidene), Dipp2Im (1,3-bis-(2,6-di-isopropylphenyl)-imidazolin-2-ylidene) and cAACMe (1-(2,6-di-iso-propylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene) with PbI2 yielded the NHC-containing plumbylenes NHC·PbI2 (NHC = Me2ImMe (1), iPr2ImMe (2), Dipp2Im (3) and cAACMe·PbI2 (4)). Using the Pb(IV) compound PbCl2Ph2, the plumbane adducts NHC·PbCl2Ph2 (NHC = Me2ImMe (5), iPr2ImMe (6), Dipp2Im (7)) and cAACMe·PbCl2Ph2 (8)) were isolated in high yields. Reduction of the lead(IV) adducts 5 and 6 with excess KC8 afforded the diaryl substituted plumbylenes Me2ImMe·PbPh2 (9) and iPr2ImMe·PbPh2 (10), which are stable in the solid state but decompose in solution.

Spontaneous N2-diboranylation of [W(N2)2(dppe)2] with B2Br4(SMe2)2.

The 1,3-bromoboration of [W(N2)2(dppe)2] (dppe = 1,2-bis(diphenylphosphino)ethane) with B2Br4(SMe2)2 in the presence of various Lewis bases L yields diboranyldiazenido complexes, with L coordinating either at the terminal or internal boron atom. The 2 : 1 reaction of [W(N2)2(dppe)2] and B2Br4(SMe2)2 yields a 1,2-bis(diazenido)diborane-bridged ditungsten complex with a fully planar π-conjugated BrWN2B2Br2N2WBr core.

Tricyanoborane-Functionalized Anionic N-Heterocyclic Carbenes: Adjustment of Charge and Stereo-Electronic Properties.

The 1-methyl-3-(tricyanoborane)imidazolin-2-ylidenate anion (2) was obtained in high yield by deprotonation of the B(CN)3 -methylimidazole adduct 1. Regarding charge and stereo-electronic properties, anion 2 closes the gap between well-known neutral NHCs and the ditopic dianionic NHC, the 1,3-bis(tricyanoborane)imidazolin-2-ylidenate dianion (IIb). The influence of the number of N-bonded tricyanoborane moieties on the σ-donating and π-accepting properties of NHCs was assessed by quantum chemical calculations and verified by experimental data on 2, IIb, and 1,3-dimethylimidazolin-2-ylidene (IMe, IIa). Therefore NHC 2, which acts as a ditopic ligand via the carbene center and the cyano groups, was reacted with alkyl iodides, selenium, and [Ni(CO)4 ] yielding alkylated imidazoles 3 and 4, the anionic selenium adduct 5, and the anionic nickel tricarbonyl complex 8, respectively. The results of this study prove that charge, number of coordination sites, buried volume (%Vbur ) and σ-donor and π-acceptor abilities of NHCs can be effectively fine-tuned via the number of tricyanoborane substituents.

Dismutation of Tricyanoboryllead Compounds: The Homoleptic Tetrakis(tricyanoboryl)plumbate Tetraanion.

A series of unprecedently air-stable (tricyanoboryl)plumbate anions was obtained by the reaction of the boron-centered nucleophile B(CN)3 2- with triorganyllead halides. Salts of the anions [R3 PbB(CN)3 ]- (R=Ph, Et) were isolated and found to be stable in air at room temperature. In the case of Me3 PbHal (Hal=Cl, Br), a mixture of the anions [Me4-n Pb{B(CN)3 }n ]n- (n=1, 2) was obtained. The [Et3 PbB(CN)3 ]- ion undergoes stepwise dismutation in aqueous solution to yield the plumbate anions [Et4-n Pb{B(CN)3 }n ]n- (n=1-4) and PbEt4 as by-product. The reaction rate increases with decreasing pH value of the aqueous solution or by bubbling O2 through the reaction mixture. Adjustment of the conditions allowed the selective formation and isolation of salts of all anions of the series [Et4-n Pb{B(CN)3 }n ]n- (n=2-4) including the homoleptic tetraanion [Pb{B(CN)3 }4 ]4- .