Size-tunable silicon nanoparticles synthesized in solution via a redox reaction.

A current challenge in silicon chemistry is to perform liquid-phase synthesis of silicon nanoparticles, which would permit the use of colloidal synthesis techniques to control size and shape. Herein we show how silicon nanoparticles were synthesized at ambient temperature and pressure in organic solvents through a redox reaction. Specifically, a hexacoordinated silicon complex, bis(N,N'-diisopropylbutylamidinato)dichlorosilane, was reduced by a silicon Zintl phase, sodium silicide (Na4Si4). The resulting silicon nanoparticles were crystalline with sizes tuned from a median particle diameter of 15 nm to 45 nm depending on the solvent. Photoluminescence measurements performed on colloidal suspensions of the 45 nm diameter silicon nanoparticles indicated a blue emission signal, attributed to the partial oxidation of the Si nanocrystals or to the presence of nitrogen impurities.

Upscale Synthesis of Magnetic Mesoporous Silica Nanoparticles and Application to Metal Ion Separation: Nanosafety Evaluation.

The synthesis of core-shell magnetic mesoporous nanoparticles (MMSNs) through a phase transfer process is usually performed at the 100-250 mg scale. At the gram scale, nanoparticles without cores or with multicore systems are observed. Iron oxide core nanoparticles (IO) were synthesized through a thermal decomposition procedure of α-FeO(OH) in oleic acid. A phase transfer from chloroform to water was then performed in order to wrap the IO nanoparticles with a mesoporous silica shell through the sol-gel procedure. MMSNs were then functionalized with DTPA (diethylenetriaminepentacetic acid) and used for the separation of metal ions. Their toxicity was evaluated. The phase transfer procedure was crucial to obtaining MMSNs on a large scale. Three synthesis parameters were rigorously controlled: temperature, time and glassware. The homogeneous dispersion of MMSNs on the gram scale was successfully obtained. After functionalization with DTPA, the MMSN-DTPAs were shown to have a strong affinity for Ni ions. Furthermore, toxicity was evaluated in cells, zebrafish and seahorse cell metabolic assays, and the nanoparticles were found to be nontoxic. We developed a method of preparing MMSNs at the gram scale. After functionalization with DTPA, the nanoparticles were efficient in metal ion removal and separation; furthermore, no toxicity was noticed up to 125 µg mL-1 in zebrafish.

Dendritic Mesoporous Organosilica Nanoparticles with Photosensitizers for Cell Imaging, siRNA Delivery and Protein Loading.

Dendritic mesoporous organosilica nanoparticles (DMON) are a new class of biodegradable nanoparticles suitable for biomolecule delivery. We studied the photochemical internalization (PCI) and photodynamic therapy (PDT) of DMON to investigate new ways for DMON to escape from the endosomes-lysosomes and deliver biomolecules into the cytoplasm of cells. We added photosensitizers in the framework of DMON and found that DMON were loaded with siRNA or FVIII factor protein. We made four formulations with four different photosensitizers. The photosensitizers allowed us to perform imaging of DMON in cancer cells, but the presence of the tetrasulfide bond in the framework of DMON quenched the formation of singlet oxygen. Fortunately, one formulation allowed us to efficiently deliver proapoptotic siRNA in MCF-7 cancer cells leading to 31% of cancer cell death, without irradiation. As for FVIII protein, it was loaded in two formulations with drug-loading capacities (DLC) up to 25%. In conclusion, DMON are versatile nanoparticles capable of loading siRNA and delivering it into cancer cells, and also loading FVIII protein with good DLC. Due to the presence of tetrasulfide, it was not possible to perform PDT or PCI.

Two-Photon Light Trigger siRNA Transfection of Cancer Cells Using Non-Toxic Porous Silicon Nanoparticles.

The concept of using two-photon excitation in the NIR for the spatiotemporal control of biological processes holds great promise. However, its use for the delivery of nucleic acids has been very scarcely described and the reported procedures are not optimal as they often involve potentially toxic materials and irradiation conditions. This work prepares a simple system made of biocompatible porous silicon nanoparticles (pSiNP) for the safe siRNA photocontrolled delivery and gene silencing in cells upon two-photon excitation. PSiNP are linked to an azobenzene moiety, which possesses a lysine group (pSiNP@ICPES-azo@Lys) to efficiently complex siRNA. Non-linear excitation of the two-photon absorber system (pSiNP) followed by intermolecular energy transfer (FRET) to trans azobenzene moiety, result in the photoisomerization of the azobenzene from trans to cis and in the destabilization of the azobenzene-siRNA complex, thus inducing the delivery of the cargo siRNA to the cytoplasm of cells. Efficient silencing in MCF-7 expressing stable firefly luciferase with siRNAluc against luciferase is observed. Furthermore, siRNA against inhibitory apoptotic protein (IAP) leads to over 70% of MCF-7 cancer cell death. The developed technique using two-photon light allows a unique high spatiotemporally controlled and safe siRNA delivery in cells in few seconds of irradiation.

Periodic Mesoporous Organosilica Nanoparticles for CO2 Adsorption at Standard Temperature and Pressure.

(1) Background: Due to human activities, greenhouse gas (GHG) concentrations in the atmosphere are constantly rising, causing the greenhouse effect. Among GHGs, carbon dioxide (CO2) is responsible for about two-thirds of the total energy imbalance which is the origin of the increase in the Earth's temperature. (2) Methods: In this field, we describe the development of periodic mesoporous organosilica nanoparticles (PMO NPs) used to capture and store CO2 present in the atmosphere. Several types of PMO NP (bis(triethoxysilyl)ethane (BTEE) as matrix, co-condensed with trialkoxysilylated aminopyridine (py) and trialkoxysilylated bipyridine (Etbipy and iPrbipy)) were synthesized by means of the sol-gel procedure, then characterized with different techniques (DLS, TEM, FTIR, BET). A systematic evaluation of CO2 adsorption was carried out at 298 K and 273 K, at low pressure. (3) Results: The best values of CO2 adsorption were obtained with 6% bipyridine: 1.045 mmol·g-1 at 298 K and 2.26 mmol·g-1 at 273 K. (4) Conclusions: The synthetized BTEE/aminopyridine or bipyridine PMO NPs showed significant results and could be promising for carbon capture and storage (CCS) application.

Controlling disorder in the ZnGa2O4:Cr3+ persistent phosphor by Mg2+ substitution.

We have studied in this work the effect of increasing structural disorder on the persistent luminescence of a Cr3+ doped zinc gallate spinel. This disorder was introduced by progressive substitution of Zn2+ by Mg2+ ions, and was studied by photoluminescence, X-ray diffraction, extended X-ray absorption fine structure (EXAFS), X-ray absorption near edge structure (XANES) and electron paramagnetic resonance (EPR) spectroscopy. It was found that increasing the Mg/Zn substitution decreases the number of Cr3+ in undistorted sites and increases the number of Cr3+ with neighbouring antisite defects and with neighbouring Cr3+ ions (referred to as Cr clusters), which in turn decreases the intensity of persistent luminescence. Both XANES and EPR spectra could be simulated by a linear combination of Cr3+ spectra with three types of Cr3+ environments. The increasing disorder was found to be correlated with a decrease of the average Cr-O bond length and a decrease of crystal field strength experienced by Cr3+ ions.

Order and disorder around Cr(3+) in chromium doped persistent luminescent AB2O4 spinels.

The X-ray absorption near edge structure (XANES) spectroscopy technique is used to better understand the charging and decharging processes of the persistent luminescence in the Cr(3+)doped AB2O4 spinels (A = Zn, Mg and B = Ga and Al) with low photon energy excitation by visible light. Cr K edge XANES spectra have been simulated for different near neighbour environments around the Cr(3+) recombination centres and compared with the experimental curve. In the Cr(3+):ZnGa2O4 compound, the Cr(3+) local structure corresponds mostly to that of a normal spinel (∼70%), while the rest comprises of a distorted octahedral environment arising from cationic site inversion and a contribution from chromium clustering. This local structure is considerably different in Cr(3+):MgGa2O4 and Cr(3+):ZnAl2O4, where, for both cases, chromium clustering represents the main contribution. The strong correlation between the intensity of persistent luminescence and the percentage of Cr in clusters leads us to infer that the presence of Cr clusters is responsible for the decrease of the intensity of the visible light induced persistent luminescence in the Cr(3+) doped AB2O4 spinels.

The importance of inversion disorder in the visible light induced persistent luminescence in Cr³âº doped AB2O4 (A = Zn or Mg and B = Ga or Al).

Cr(3+) doped spinel compounds AB2O4 with A = Zn, Mg and B = Ga, Al exhibit a long, near infrared persistent luminescence when excited with UV or X-rays. In addition, the persistent luminescence of ZnGa2O4, and to a lesser extent MgGa2O4, can also be induced by visible light excitation via (4)A2→(4)T2 transition of Cr(3+), which makes these compounds suitable as biomarkers for in vivo optical imaging of small animals. We correlate this peculiar optical property with the presence of antisite defects, which are present in ZnGa2O4 and MgGa2O4. By using X-ray absorption fine structure (XAFS) spectroscopy, associated with electron paramagnetic resonance (EPR) and optical emission spectroscopy, it is shown that an increase in antisite defects concentration results in a decrease in the Cr-O bond length and the octahedral crystal field energy. A part of the defects occurs in the close environment of Cr(3+) ions, as shown by the increasing strain broadening of EPR and XAFS peaks observed upon increasing antisite disorder. It appears that ZnAl2O4, which exhibits the largest crystal field splitting of Cr(3+) and the smallest antisite disorder, does not show considerable persistent luminescence upon visible light excitation as compared to ZnGa2O4 and MgGa2O4. These results highlight the importance of Cr(3+) ions with neighboring antisite defects in the mechanism of persistent luminescence exhibited by Cr(3+) doped AB2O4 spinel compounds.

The in vivo activation of persistent nanophosphors for optical imaging of vascularization, tumours and grafted cells.

Optical imaging for biological applications requires more sensitive tools. Near-infrared persistent luminescence nanoparticles enable highly sensitive in vivo optical detection and complete avoidance of tissue autofluorescence. However, the actual generation of persistent luminescence nanoparticles necessitates ex vivo activation before systemic administration, which prevents long-term imaging in living animals. Here, we introduce a new generation of optical nanoprobes, based on chromium-doped zinc gallate, whose persistent luminescence can be activated in vivo through living tissues using highly penetrating low-energy red photons. Surface functionalization of this photonic probe can be adjusted to favour multiple biomedical applications such as tumour targeting. Notably, we show that cells can endocytose these nanoparticles in vitro and that, after intravenous injection, we can track labelled cells in vivo and follow their biodistribution by a simple whole animal optical detection, opening new perspectives for cell therapy research and for a variety of diagnosis applications.

Controlling electron trap depth to enhance optical properties of persistent luminescence nanoparticles for in vivo imaging.

Focusing on the use of nanophosphors for in vivo imaging and diagnosis applications, we used thermally stimulated luminescence (TSL) measurements to study the influence of trivalent lanthanide Ln(3+) (Ln = Dy, Pr, Ce, Nd) electron traps on the optical properties of Mn(2+)-doped diopside-based persistent luminescence nanoparticles. This work reveals that Pr(3+) is the most suitable Ln(3+) electron trap in the diopside lattice, providing optimal trap depth for room temperature afterglow and resulting in the most intense luminescence decay curve after X-ray irradiation. This luminescence dependency toward the electron trap is maintained through additional doping with Eu(2+), allowing UV-light excitation, critical for bioimaging applications in living animals. We finally identify a novel composition (CaMgSi(2)O(6):Eu(2+),Mn(2+),Pr(3+)) for in vivo imaging, displaying a strong near-infrared afterglow centered on 685 nm, and present evidence that intravenous injection of such persistent luminescence nanoparticles in mice allows not only improved but highly sensitive detection through living tissues.

ZnGa2O4:Cr3+: a new red long-lasting phosphor with high brightness.

ZnGa2O4:Cr3+ is shown to be a new bright red UV excited long-lasting phosphor potentially suitable for in vivo imaging due to its 650 nm-750 nm emission range. Photoluminescence and X-ray excited radioluminescence show the 2E → 4A2 emission lines of both ideal Cr3+ and Cr3+ distorted by a neighboring antisite defect while long-lasting phosphorescence (LLP) and thermally stimulated luminescence (TSL) almost exclusively occur via distorted Cr3+. The most intense LLP is obtained with a nominal Zn deficiency and is related to a TSL peak at 335K. A mechanism for LLP and TSL is proposed, whereby the antisite defect responsible for the distortion at Cr3+ acts as a deep trap.

Defects Identification and Effects of Annealing on Lu2(1-x)Y2xSiO5 (LYSO) Single Crystals for Scintillation Application.

The nature, properties and relative concentrations of electronic defects were investigated by Thermoluminescence (TL) in Lu2(1-x)Y2xSiO5 (LYSO) single crystals. Ce and Tb-doped single crystals, grown by the Czochralski technique (CZ), revealed similar traps in TL. LYSO:Ce single crystals were grown by the Floating-Zone technique (FZ) with increasing oxygen concentration in the growth atmosphere. TL intensity is strongly dependent on the oxygen content of the material, and oxygen vacancies are proven to be the main electronic defects in LYSO. The effects of oxidizing and reducing annealing post-treatment on these defects were investigated. While oxidizing treatments efficiently reduce the amount of electronic defects, reducing treatments increase the amount of existing traps. In a thermally assisted tunneling mechanism, the localization of oxygen vacancies around the dopant is discussed. They are shown to be in the close vicinity of the dopant, though not in first neighbor positions.

Solid state and solution 43Ca NMR of calcium peroxides involved in the disproportionation of hydrogen peroxide by calcium hydroxide.

In order to get some insight into the mechanism of the disproportionation of hydrogen peroxide catalyzed by calcium hydroxide, 43Ca NMR spectra of enriched samples of calcium peroxides and of their precursors have been studied in both solution and solid state. This study demonstrates that no well-defined peroxidized calcium species are formed in solution, showing that the catalytic role of calcium is likely restricted to the solid state. Most of the calcium compounds that could be involved in the catalytic process have been investigated with solid state NMR. The shift and quadrupolar parameters of Ca(OH)2, CaO2.8H2O and CaO2.2H2O2 are reported for the first time. These parameters are different enough to allow the quantitative analysis of a complex mixture of these compounds by NMR.