Implementation of plasmonic band structure to understand polariton hybridization within metamaterials.

Gap surface plasmons (GSPs) serve a diverse range of plasmonic applications, including energy harvesting, communications, molecular sensing, and optical detection. GSPs may be realized where tightly spaced plasmonic structures exhibit strong spatial overlap between the evanescent fields. We demonstrate that within similar, nested geometries that the near-fields of the GSPs within the individual nanostructures are hybridized. This creates two or more distinct resonances exhibiting near-field distributions extended over adjacent spatial regions. In contrast, dissimilar, nested structures exhibit two distinct resonances with nominally uncoupled near-fields, resulting in two or more individual antenna resonance modes. We deploy plasmonic band structure calculations to provide insight into the type and degree of hybridization within these systems, comparing the individual components. This understanding can be used in the optimized design of polaritonic metamaterial structures for desired applications.

Intrinsic Plasmon-Phonon Interactions in Highly Doped Graphene: A Near-Field Imaging Study.

As a two-dimensional semimetal, graphene offers clear advantages for plasmonic applications over conventional metals, such as stronger optical field confinement, in situ tunability, and relatively low intrinsic losses. However, the operational frequencies at which plasmons can be excited in graphene are limited by the Fermi energy EF, which in practice can be controlled electrostatically only up to a few tenths of an electronvolt. Higher Fermi energies open the door to novel plasmonic devices with unprecedented capabilities, particularly at mid-infrared and shorter-wave infrared frequencies. In addition, this grants us a better understanding of the interaction physics of intrinsic graphene phonons with graphene plasmons. Here, we present FeCl3-intercalated graphene as a new plasmonic material with high stability under environmental conditions and carrier concentrations corresponding to EF > 1 eV. Near-field imaging of this highly doped form of graphene allows us to characterize plasmons, including their corresponding lifetimes, over a broad frequency range. For bilayer graphene, in contrast to the monolayer system, a phonon-induced dipole moment results in increased plasmon damping around the intrinsic phonon frequency. Strong coupling between intrinsic graphene phonons and plasmons is found, supported by ab initio calculations of the coupling strength, which are in good agreement with the experimental data.

Extraordinary linear dynamic range in laser-defined functionalized graphene photodetectors.

Graphene-based photodetectors have demonstrated mechanical flexibility, large operating bandwidth, and broadband spectral response. However, their linear dynamic range (LDR) is limited by graphene's intrinsic hot-carrier dynamics, which causes deviation from a linear photoresponse at low incident powers. At the same time, multiplication of hot carriers causes the photoactive region to be smeared over distances of a few micrometers, limiting the use of graphene in high-resolution applications. We present a novel method for engineering photoactive junctions in FeCl3-intercalated graphene using laser irradiation. Photocurrent measured at these planar junctions shows an extraordinary linear response with an LDR value at least 4500 times larger than that of other graphene devices (44 dB) while maintaining high stability against environmental contamination without the need for encapsulation. The observed photoresponse is purely photovoltaic, demonstrating complete quenching of hot-carrier effects. These results pave the way toward the design of ultrathin photodetectors with unprecedented LDR for high-definition imaging and sensing.

Aspect-ratio driven evolution of high-order resonant modes and near-field distributions in localized surface phonon polariton nanostructures.

Polar dielectrics have garnered much attention as an alternative to plasmonic metals in the mid- to long-wave infrared spectral regime due to their low optical losses. As such, nanoscale resonators composed of these materials demonstrate figures of merit beyond those achievable in plasmonic equivalents. However, until now, only low-order, phonon-mediated, localized polariton resonances, known as surface phonon polaritons (SPhPs), have been observed in polar dielectric optical resonators. In the present work, we investigate the excitation of 16 distinct high-order, multipolar, localized surface phonon polariton resonances that are optically excited in rectangular pillars etched into a semi-insulating silicon carbide substrate. By elongating a single pillar axis we are able to significantly modify the far- and near-field properties of localized SPhP resonances, opening the door to realizing narrow-band infrared sources with tailored radiation patterns. Such control of the near-field behavior of resonances can also impact surface enhanced infrared optical sensing, which is mediated by polarization selection rules, as well as the morphology and strength of resonator hot spots. Furthermore, through the careful choice of polar dielectric material, these results can also serve as the guiding principles for the generalized design of optical devices that operate from the mid- to far-infrared.

Small-molecule detection in thiol-yne nanocomposites via surface-enhanced Raman spectroscopy.

Surface-enhanced Raman spectroscopy (SERS) is generally performed on planar surfaces, which can be difficult to prepare and may limit the interaction of the sensing surface with targets in large volume samples. We propose that nanocomposite materials can be configured that both include SERS probes and provide a high surface area-to-volume format, i.e., fibers. Thiol-yne nanocomposite films and fibers were fabricated using exposure to long-wave ultraviolet light after the inclusion of gold nanoparticles (AuNPs) functionalized with thiophenol. A SERS response was observed that was proportional to the aggregation of the AuNPs within the polymers and the amount of thiophenol present. Overall, this proof-of-concept fabrication of SERS active polymers indicated that thiol-yne nanocomposites may be useful as durable film or fiber SERS probes. Properties of the nanocomposites were evaluated using various techniques including UV-vis spectroscopy, µ-Raman spectroscopy, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy.

Low-loss, extreme subdiffraction photon confinement via silicon carbide localized surface phonon polariton resonators.

Plasmonics provides great promise for nanophotonic applications. However, the high optical losses inherent in metal-based plasmonic systems have limited progress. Thus, it is critical to identify alternative low-loss materials. One alternative is polar dielectrics that support surface phonon polariton (SPhP) modes, where the confinement of infrared light is aided by optical phonons. Using fabricated 6H-silicon carbide nanopillar antenna arrays, we report on the observation of subdiffraction, localized SPhP resonances. They exhibit a dipolar resonance transverse to the nanopillar axis and a monopolar resonance associated with the longitudinal axis dependent upon the SiC substrate. Both exhibit exceptionally narrow linewidths (7-24 cm(-1)), with quality factors of 40-135, which exceed the theoretical limit of plasmonic systems, with extreme subwavelength confinement of (λ(res)3/V(eff))1/3 = 50-200. Under certain conditions, the modes are Raman-active, enabling their study in the visible spectral range. These observations promise to reinvigorate research in SPhP phenomena and their use for nanophotonic applications.

Chemical gradients on graphene to drive droplet motion.

This work demonstrates the production of a well-controlled, chemical gradient on the surface of graphene. By inducing a gradient of oxygen functional groups, drops of water and dimethyl-methylphosphonate (a nerve agent simulant) are "pulled" in the direction of increasing oxygen content, while fluorine gradients "push" the droplet motion in the direction of decreasing fluorine content. The direction of motion is broadly attributed to increasing/decreasing hydrophilicity, which is correlated to high/low adhesion and binding energy. Such tunability in surface chemistry provides additional capabilities in device design for applications ranging from microfluidics to chemical sensing.

Mie resonance-enhanced light absorption in periodic silicon nanopillar arrays.

Mie-resonances in vertical, small aspect-ratio and subwavelength silicon nanopillars are investigated using visible bright-field µ-reflection measurements and Raman scattering. Pillar-to-pillar interactions were examined by comparing randomly to periodically arranged arrays with systematic variations in nanopillar diameter and array pitch. First- and second-order Mie resonances are observed in reflectance spectra as pronounced dips with minimum reflectances of several percent, suggesting an alternative approach to fabricating a perfect absorber. The resonant wavelengths shift approximately linearly with nanopillar diameter, which enables a simple empirical description of the resonance condition. In addition, resonances are also significantly affected by array density, with an overall oscillating blue shift as the pitch is reduced. Finite-element method and finite-difference time-domain simulations agree closely with experimental results and provide valuable insight into the nature of the dielectric resonance modes, including a surprisingly small influence of the substrate on resonance wavelength. To probe local fields within the Si nanopillars, µ-Raman scattering measurements were also conducted that confirm enhanced optical fields in the pillars when excited on-resonance.

Non-lithographic SERS substrates: tailoring surface chemistry for Au nanoparticle cluster assembly.

Near-field plasmonic coupling and local field enhancement in metal nanoarchitectures, such as arrangements of nanoparticle clusters, have application in many technologies from medical diagnostics, solar cells, to sensors. Although nanoparticle-based cluster assemblies have exhibited signal enhancements in surface-enhanced Raman scattering (SERS) sensors, it is challenging to achieve high reproducibility in SERS response using low-cost fabrication methods. Here an innovative method is developed for fabricating self-organized clusters of metal nanoparticles on diblock copolymer thin films as SERS-active structures. Monodisperse, colloidal gold nanoparticles are attached via a crosslinking reaction on self-organized chemically functionalized poly(methyl methacrylate) domains on polystyrene-block-poly(methyl methacrylate) templates. Thereby nanoparticle clusters with sub-10-nanometer interparticle spacing are achieved. Varying the molar concentration of functional chemical groups and crosslinking agent during the assembly process is found to affect the agglomeration of Au nanoparticles into clusters. Samples with a high surface coverage of nanoparticle cluster assemblies yield relative enhancement factors on the order of 109 while simultaneously producing uniform signal enhancements in point-to-point measurements across each sample. High enhancement factors are associated with the narrow gap between nanoparticles assembled in clusters in full-wave electromagnetic simulations. Reusability for small-molecule detection is also demonstrated. Thus it is shown that the combination of high signal enhancement and reproducibility is achievable using a completely non-lithographic fabrication process, thereby producing SERS substrates having high performance at low cost.

Plasmonic nanopillar arrays for large-area, high-enhancement surface-enhanced Raman scattering sensors.

Efforts to create reproducible surface-enhanced Raman scattering (SERS)-based chemical and biological sensors has been hindered by difficulties in fabricating large-area SERS-active substrates with a uniform, reproducible SERS response that still provides sufficient enhancement for easy detection. Here we report on periodic arrays of Au-capped, vertically aligned silicon nanopillars that are embedded in a Au plane upon a Si substrate. We illustrate that these arrays are ideal for use as SERS sensor templates, in that they provide large, uniform and reproducible average enhancement factors up to ∼1.2 × 10(8) over the structure surface area. We discuss the impact of the overall geometry of the structures upon the SERS response at 532, 633, and 785 nm incident laser wavelengths. Calculations of the electromagnetic field distributions and intensities within such structures were performed and both the wavelength dependence of the predicted SERS response and the field distribution within the nanopillar structure are discussed and support the experimental results we report.

Large-area plasmonic hot-spot arrays: sub-2 nm interparticle separations with plasma-enhanced atomic layer deposition of Ag on periodic arrays of Si nanopillars.

Initial reports of plasmonic 'hot-spots' enabled the detection of single molecules via surface-enhanced Raman scattering (SERS) from random distributions of plasmonic nanoparticles. Investigations of systems with near-field plasmonically coupled nanoparticles began, however, the ability to fabricate reproducible arrays of such particles has been lacking. We report on the fabrication of large-area, periodic arrays of plasmonic 'hot-spots' using Ag atomic layer deposition to overcoat Si nanopillar templates leading to reproducible interpillar gaps down to <2 nm. These plasmonic 'hot-spots' arrays exhibited over an order of magnitude increase in the SERS response in comparison to similar arrays with larger interpillar separations.

Transmission of crackles in patients with interstitial pulmonary fibrosis, congestive heart failure, and pneumonia.

OBJECTIVE: Patients with interstitial pulmonary fibrosis (IPF) often have diffusely abnormal findings on chest radiographs, making it difficult to detect evidence of superimposed congestive heart failure (CHF) or pneumonia. The goal of this study was to determine whether the crackles of IPF differed in their transmission and frequency from crackles of CHF and pneumonia in the hope of improving diagnosis and monitoring of these patients. METHODS: A multichannel lung sound analyzer was used to collect 20-s samples of sound from 25 patients with pneumonia, 17 patients with CHF, and 19 patients with IPF. We calculated a crackle transmission coefficient (CTC) by quantifying the distance a crackle spreads using a technique that cross-correlated the signal containing the highest amplitude crackle with the corresponding signal on all other ipsilateral channels: CTC, 0% = no transmission; CTC, 100% = equal transmission to all channels. RESULTS: Both the CTC and the crackle frequency in IPF were statistically different from that in CHF and pneumonia (p < 0.0001). The CTC averaged 24 +/- 5% for pneumonia, 25 +/- 8% for CHF, and 14 +/- 4% for IPF. The crackle frequency averaged 302 +/- 47 Hz for pneumonia, 311 +/- 62 Hz for CHF, and 462 +/- 50 Hz for IPF (+/- SD). CONCLUSION: These differences in CTC and crackle frequency offer the promise of helping guide treatment in IPF patients.