Impact of ultraviolet-B radiation on early-season morpho-physiological traits of indica and japonica rice genotypes.

Ultraviolet (UV)-B radiation is considered one of the major detrimental rays coming from the Sun. UV-B radiation has a harmful impact on plant growth and development. The effect of UV-B radiation was studied on 64 rice (Oryza sativa L.) genotypes during the vegetative season. An equal number of genotypes from the japonica (50%) and indica (50%) subspecies were phenotyped using the Soil-Plant-Atmosphere-Research (SPAR) units. The 10 kJ UV-B was imposed 12 days after planting (DAP) and continued for three weeks (21 d). Based on the combined ultraviolet-B radiation response index (CUVBRI) for each genotype, the 64 rice genotypes were classified into sensitive, moderately sensitive, moderately tolerant, and tolerant. Various shoot traits, such as plant height, tiller, and leaf numbers, were measured. We also studied critical root phenological traits like root volume, diameter, tips, and forks. Out of all the studied shoot traits, leaf area showed maximum reduction for both indica (54%) and japonica (48%). Among the root traits, root length decreased by negligible (1%) for indica as compared to japonica (5%), while root crossing and forks showed a maximum decline for japonica (37 and 42%), respectively. This study is timely, meaningful, and required because it will help breeders select a tolerant or sensitive rice line for better yield and production under abiotic stresses.

Impact of soil moisture stress during the silk emergence and grain-filling in maize.

Suboptimal soil moisture during the growing season often limits maize growth and yield. However, the growth stage-specific responses of maize to soil moisture regimes have not been thoroughly investigated. This study investigated the response of maize to five different soil moisture regimes, that are, 0.25, 0.20, 0.15, 0.10, and 0.05 m3 m-3 volumetric water content (VWC), during flowering and grain-filling stages. Sub-optimal soil moisture at the flowering and grain-filling stages reduced ear leaf stomatal conductance by 73 and 64%, respectively. An increase in stress severity caused significant reductions in ear leaf chlorophyll content and greenness-associated vegetation indices across growth stages. Fourteen days of soil moisture stress during flowering delayed silk emergence, reduced silk length (19%), and silk fresh weight (34%). Furthermore, sub-optimal soil moisture caused a significant reduction in both kernel number (53%) and weight (54%). Soil moisture stress at the flowering had a direct impact on kernel number and an indirect effect on kernel weight. During grain-filling, disruption of ear leaf physiology resulted in a 34% decrease in kernel weight and a 43% decrease in kernel number. Unlike grain-filling, treatments at the flowering significantly reduced kernel starch (3%) and increased protein by 29%. These findings suggest that developing reproductive stage stress-tolerant hybrids with improved resilience to soil moisture stress could help reduce the yield gap between irrigated and rainfed maize.

Climate trends and maize production nexus in Mississippi: empirical evidence from ARDL modelling.

Climate change poses a significant threat to agriculture. However, climatic trends and their impact on Mississippi (MS) maize (Zea mays L.) are unknown. The objectives were to: (i) analyze trends in climatic variables (1970 to 2020) using Mann-Kendall and Sen slope method, (ii) quantify the impact of climate change on maize yield in short and long run using the auto-regressive distributive lag (ARDL) model, and (iii) categorize the critical months for maize-climate link using Pearson's correlation matrix. The climatic variables considered were maximum temperature (Tmax), minimum temperature (Tmin), diurnal temperature range (DTR), precipitation (PT), relative humidity (RH), and carbon emissions (CO2). The pre-analysis, post-analysis, and model robustness statistical tests were verified, and all conditions were met. A significant upward trend in Tmax (0.13 °C/decade), Tmin (0.27 °C/decade), and CO2 (5.1 units/decade), and a downward trend in DTR ( - 0.15 °C/decade) were noted. The PT and RH insignificantly increased by 4.32 mm and 0.11% per decade, respectively. The ARDL model explained 76.6% of the total variations in maize yield. Notably, the maize yield had a negative correlation with Tmax for June, and July, with PT in August, and with DTR for June, July, and August, whereas a positive correlation was noted with Tmin in June, July, and August. Overall, a unit change in Tmax reduced the maize yield by 7.39% and 26.33%, and a unit change in PT reduced it by 0.65% and 2.69% in the short and long run, respectively. However, a unit change in Tmin, and CO2 emissions increased maize yield by 20.68% and 0.63% in the long run with no short run effect. Overall, it is imperative to reassess the agronomic management strategies, developing and testing cultivars adaptable to the revealed climatic trend, with ability to withstand severe weather conditions in ensuring sustainable maize production.

Climate trends and soybean production since 1970 in Mississippi: Empirical evidence from ARDL model.

Studying historical response of crops to weather conditions at a finer scale is essential for devising agricultural strategies tailored to expected climate changes. However, determining the relationship between crop and climate in Mississippi (MS) remains elusive. Therefore, this research attempted to i) estimate climate trends between 1970 and 2020 in MS during the soybean growing season (SGS) using the Mann-Kendall and Sen slope method, ii) calculate the impact of climate change on soybean yield using an auto-regressive distributive lag (ARDL) econometric model, and iii) identify the most critical months from a crop-climate perspective by generating a correlation between the detrended yield and the monthly average for each climatic variable. Specific variables considered were maximum temperature (Tmax), minimum temperature (Tmin), diurnal temperature range (DTR), precipitation (PT), carbon dioxide emissions (CO2), and relative humidity (RH). All required diagnostic-tests i.e., pre-analysis, post-analysis, model-sensitivity, and assessing the models' goodness-of-fit were performed and statistical standards were met. A positive trend in Tmin (+0.25 °C/decade), and a negative trend in DTR (-0.18 °C/decade) was found. Although Tmax, PT, and RH showed non-significant trends, numerical changes were noted as +0.11 °C/decade, +3.03 mm/decade, and -0.06 %/decade, respectively. Furthermore, soybean yield was positively correlated with Tmin (in June and September), PT (in July and August), and RH (in July), but negatively correlated with Tmax (in July and August) and DTR (in June, July, and August). Soybean yield was observed to be significantly reduced by 18.11 % over the long-term and by 5.51 % over the short-term for every 1 °C increase in Tmax. With every unit increase in Tmin and CO2 emissions, the yield of soybeans increased significantly by 7.76 % and 3.04 %, respectively. Altogether, soybeans in MS exhibited variable sensitivity to short- and long-terms climatic changes. The results highlight the importance of testing climate-resilient agronomic practices and cultivars that encompass asymmetric sensitivities in response to climatic conditions of MS.

Phenological stage and vegetation index for predicting corn yield under rainfed environments.

Uncrewed aerial systems (UASs) provide high temporal and spatial resolution information for crop health monitoring and informed management decisions to improve yields. However, traditional in-season yield prediction methodologies are often inconsistent and inaccurate due to variations in soil types and environmental factors. This study aimed to identify the best phenological stage and vegetation index (VI) for estimating corn yield under rainfed conditions. Multispectral images were collected over three years (2020-2022) during the corn growing season and over fifty VIs were analyzed. In the three-year period, thirty-one VIs exhibited significant correlations (r ≥ 0.7) with yield. Sixteen VIs were significantly correlated with the yield at least for two years, and five VIs had a significant correlation with the yield for all three years. A strong correlation with yield was achieved by combining red, red edge, and near infrared-based indices. Further, combined correlation and random forest an alyses between yield and VIs led to the identification of consistent and highest predictive power VIs for corn yield prediction. Among them, leaf chlorophyll index, Medium Resolution Imaging Spectrometer (MERIS) terrestrial chlorophyll index and modified normalized difference at 705 were the most consistent predictors of corn yield when recorded around the reproductive stage (R1). This study demonstrated the dynamic nature of canopy reflectance and the importance of considering growth stages, and environmental conditions for accurate corn yield prediction.

Developing functional relationships between waterlogging and cotton growth and physiology-towards waterlogging modeling.

Cotton crop is known to be poorly adapted to waterlogging, especially during the early growth stages. Developing functional relationships between crop growth and development parameters and the duration of waterlogging is essential to develop or improve existing cotton crop models for simulating the impact of waterlogging. However, there are only limited experimental studies conducted on cotton specifically aimed at developing the necessary functional relationships required for waterlogging modeling. Further research is needed to understand the effects of waterlogging on cotton crops and improve modeling capabilities in this area. The current study aimed to conduct waterlogging experiments and develop functional relationships between waterlogging and cotton growth and physiology. The experiments were conducted in pots, and the waterlogging was initiated by plugging the drain hole at the bottom of the pot using a wooden peg. In the experiments, eight waterlogging treatments, including the control treatment, were imposed at the vegetative growth stage (15 days after sowing). Control treatment had zero days of water-logged condition; other treatments had 2, 4, 6, 8, 10, 12, and 14 days of waterlogging. It took five days to reach zero oxygen levels and one to two days to return to control after the treatment. After a total treatment duration of 14 days (30 days after sowing), the growth, physiological, reproductive, and nutrient analysis was conducted. All physiological parameters decreased with the number of days of waterlogging. Flavonoid and anthocyanin index increased with increased duration of waterlogging. Photosynthesis and whole plant dry weight in continuously waterlogged conditions were 75% and 78% less compared to 0, and 2-day water-logged plants. Plant height, stem diameter, number of main stem leaves, leaf area, and leaf length also decreased with waterlogging duration. When waterlogging duration increased, leaf, stem, and root macronutrients decreased, while micronutrients showed mixed trends. Based on the experimental study, functional relationships (linear, quadratic, and exponential decay) and waterlogging stress response indices are developed between growth and development parameters and the duration of waterlogging. This can serve as a base for developing or improving process-based cotton models to simulate the impact of waterlogging.

Developing Functional Relationships between Soil Moisture Content and Corn Early-Season Physiology, Growth, and Development.

Drought is a severe threat to agriculture production that affects all growth stages of plants, including corn (Zea mays L.). Any factor affecting early seedling growth and development will significantly impact yield. Despite the recurrence of low rainfall during the growing seasons, corn responses to different early-season soil moisture content levels have not been investigated. In this study, we investigated how corn morpho-physiological and biomass traits responded to varied soil moisture content during the early vegetative stage. Two corn hybrids were grown in a pot-culture facility under five different soil moisture treatments (0.15, 0.12, 0.09, 0.06, and 0.03 m3 m-3 volumetric water content, VWC) to assess the growth and developmental responses to varied soil moisture content during early-season growth (V2 to V7) stage. Sub-optimal soil moisture content limited plant growth and development by reducing physiological and phenotypic expression. Stomatal conductance and transpiration were decreased by an average of 65% and 59% across stress treatments relative to optimum conditions. On average, soil moisture deficit reduced the total leaf area by 71% and 72% compared to the control in 'A6659VT2RIB' and 'P1316YHR', respectively. Shoot and root dry weights were reduced by 74% and 43% under 0.03 m3 m-3 VWC. An increase in the root-to-shoot ratio was noticed under low VWC conditions compared to the control. Based on the stress tolerance index, the physiology and leaf growth parameters were more sensitive to soil moisture deficit. Our results highlight the impact of sub-optimal soil moisture on physiology and morphological traits during early-season growth. 'P1316YHR' demonstrated better physiological performance under stress conditions, while 'A6659VT2RIB' produced relatively better root growth. The findings suggest that biomass partitioning between shoot and root components is dynamic and depends on stress intensity. The current findings can help to prioritize traits associated with the early-season drought tolerance in corn. The functional relationships developed between soil moisture content and growth and developmental responses can be integrated into corn crop modeling to allow better irrigation management decisions.

Comprehensive analysis of physiological and metabolomic responses to drought reveals specific modulation of acquired tolerance mechanisms in rice.

Mild stresses induce "acquired tolerance traits" (ATTs) that provide tolerance when stress becomes severe. Here, we identified the genetic variability in ATTs among a panel of rice germplasm accessions and demonstrated their relevance in protecting growth and productivity under water-limited conditions. Diverse approaches, including physiological screens, association mapping and metabolomics, were adopted and revealed 43 significant marker-trait associations. Nontargeted metabolomic profiling of contrasting genotypes revealed 26 "tolerance-related-induced" primary and secondary metabolites in the tolerant genotypes (AC-39000 and AC-39020) compared to the susceptible one (BPT-5204) under water-limited condition. Metabolites that help maintain cellular functions, especially Calvin cycle processes, significantly accumulated more in tolerant genotypes, which resulted in superior photosynthetic capacity and hence water use efficiency. Upregulation of the glutathione cycle intermediates explains the ROS homeostasis among the tolerant genotypes, maintaining spikelet fertility, and grain yield under stress. Bioinformatic dissection of a major effect quantitative trait locus on chromosome 8 revealed genes controlling metabolic pathways leading to the production of osmolites and antioxidants, such as GABA and raffinose. The study also led to the identification of specific trait donor genotypes that can be effectively used in translational crop improvement activities.

Effects of fine grinding on mid-infrared spectroscopic analysis of plant leaf nutrient content.

Fourier transform mid infrared (FT-MIR) spectroscopy combined with modeling techniques has been studied as a useful tool for multivariate chemical analysis in agricultural research. A drawback of this method is the sample preparation requirement, in which samples must be dried and fine ground for accurate model calibrations. For research involving large sample sets, this may dramatically increase the time and cost of analysis. This study investigates the effect of fine grinding on model performance using leaf tissue from a variety of crop species. Dried leaf samples (N = 300) from various environmental conditions were obtained with data on 11 nutrients measured using chemical methods. The samples were scanned with attenuated total reflectance (ATR) and diffuse reflectance (DRIFT) FT-MIR techniques. Scanning was repeated after fine grinding for 2, 5, and 10 min. The spectra were analyzed for the 11 nutrients using partial least squares regression with a 75%/25% split for calibration and validation and repeated for 50 iterations. All analytes except for boron, iron, and zinc were well-modeled (average R2 > 0.7), with higher R2 values on ATR spectra. The 5 min level of fine grinding was found to be most optimal considering overall model performance and sample preparation time.

Resilience of soybean cultivars to drought stress during flowering and early-seed setting stages.

Drought stress during the reproductive stage and declining soybean yield potential raise concerns about yield loss and economic return. In this study, ten cultivars were characterized for 20 traits to identify reproductive stage (R1-R6) drought-tolerant soybean. Drought stress resulted in a marked reduction (17%) in pollen germination. The reduced stomatal conductance coupled with high canopy temperature resulted in reduced seed number (45%) and seed weight (35%). Drought stress followed by rehydration increased the hundred seed weight at the compensation of seed number. Further, soybean oil decreased, protein increased, and cultivars responded differently under drought compared to control. In general, cultivars with high tolerance scores for yield displayed lower tolerance scores for quality content and vice versa. Among ten cultivars, LS5009XS and G4620RX showed maximum stress tolerance scores for seed number and seed weight. The observed variability in leaf reflectance properties and their relationship with physiological or yield components suggested that leaf-level sensing information can be used for differentiating drought-sensitive soybean cultivars from tolerant ones. The study led to the identification of drought-resilient cultivars/promising traits which can be exploited in breeding to develop multi-stress tolerant cultivars.

Impact of recent climate change on corn, rice, and wheat in southeastern USA.

Climate change and its impact on agriculture productivity vary among crops and regions. The southeastern United States (SE-US) is agro-ecologically diversified, economically dependent on agriculture, and mostly overlooked by agroclimatic researchers. The objective of this study was to compute the effect of climatic variables; daily maximum temperature (Tmax), daily minimum temperature (Tmin), and rainfall on the yield of major cereal crops i.e., corn (Zea mays L.), rice (Oryza sativa L.), and wheat (Triticum aestivum L.) in SE-US. A fixed-effect model (panel data approach) was used by applying the production function on panel data from 1980 to 2020 from 11 SE-US states. An asymmetrical warming pattern was observed, where nocturnal warming was 105.90%, 106.30%, and 32.14%, higher than the diurnal warming during corn, rice, and wheat growing seasons, respectively. Additionally, a shift in rainfall was noticed ranging from 19.2 to 37.2 mm over different growing seasons. Rainfall significantly reduced wheat yield, while, it had no effect on corn and rice yields. The Tmax and Tmin had no significant effect on wheat yield. A 1 °C rise in Tmax significantly decreased corn (- 34%) and rice (- 8.30%) yield which was offset by a 1 °C increase in Tmin increasing corn (47%) and rice (22.40%) yield. Conclusively, overall temperature change of 1 °C in the SE-US significantly improved corn yield by 13%, rice yield by 14.10%, and had no effect on wheat yield.

Effects of drought and heat stresses during reproductive stage on pollen germination, yield, and leaf reflectance properties in maize (Zea mays L.).

Drought and heat stresses are the major abiotic stress factors detrimental to maize (Zea mays L.) production. Much attention has been directed toward plant responses to heat or drought stress. However, maize reproductive stage responses to combined heat and drought remain less explored. Therefore, this study aimed to quantify the impact of optimum daytime (30°C, control) and warmer daytime temperatures (35°C, heat stress) on pollen germination, morpho-physiology, and yield potential using two maize genotypes ("Mo17" and "B73") under contrasting soil moisture content, that is, 100% and 40% irrigation during flowering. Pollen germination of both genotypes decreased under combined stresses (42%), followed by heat stress (30%) and drought stress (19%). Stomatal conductance and transpiration were comparable between control and heat stress but significantly decreased under combined stresses (83% and 72%) and drought stress (52% and 47%) compared with the control. Genotype "Mo17" reduced its green leaf area to minimize the water loss, which appears to be one of the adaptive strategies of "Mo17" under stress conditions. The leaf reflectance of both genotypes varied across treatments. Vegetation indices associated with pigments (chlorophyll index of green, chlorophyll index of red edge, and carotenoid index) and plant health (normalized difference red-edge index) were found to be highly sensitive to drought and combined stressors than heat stress. Combined drought and heat stresses caused a significant reduction in yield and yield components in both Mo17 (49%) and B73 (86%) genotypes. The harvest index of genotype "B73" was extremely low, indicating poor partitioning efficiency. At least when it comes to "B73," the cause of yield reduction appears to be the result of reduced sink number rather than the pollen and source size. To the best of our awareness, this is the first study that showed how the leaf-level spectra, yield, and quality parameters respond to the short duration of independent and combined stresses during flowering in inbred maize. Further studies are required to validate the responses of potential traits involving diverse maize genotypes under field conditions. This study suggests the need to develop maize with improved tolerance to combined stresses to sustain production under increasing temperatures and low rainfall conditions.

Low- and High-Temperature Phenotypic Diversity of Brassica carinata Genotypes for Early-Season Growth and Development.

Temperature is a major abiotic stress factor limiting plant growth and development during the early developmental stage. Information on carinata (Brassica carinata A. Braun) traits response to low and high temperatures is necessary for breeding or selecting genotypes suited for specific ecoregions, which is limited. In the present study, 12 carinata genotypes were evaluated under low (17/09°C), optimum (22/14°C), and high (27/19°C) day/night temperatures at the early developmental stage. This study quantified temperature effects on several physiological and morphological characteristics of 12-advanced carinata lines. High-temperature plants decreased (15%) the accumulation of flavonoids and increased the nitrogen balance index by 25%. Low-temperature treatment significantly inhibited the aboveground (plant height, leaf area, number, and shoot weight) and root (length, surface area, and weight) traits. Across all genotypes, the shoot weight decreased by 55% and the root weight by 49% under low temperature. On the other hand, the maximum proportion of biomass was partitioned to roots under low temperature than at the high temperature. A poor relationship (r 2 = 0.09) was found between low- and high-temperature indices, indicating differences in trait responses and tolerance mechanisms. AX17004 and AX17009 with higher root to shoot ratios might be suitable for late planting windows or regions with low-temperature spells. The two genotypes (AX17015 and AX17005) accumulated higher biomass under low- and high-temperature treatments can be used for planting in later summer or early winter. The identified low- and high-temperature stress-tolerant carinata genotypes could be a valuable resource for increasing stress tolerance during the early developmental stage.

Morpho-Physiological, Yield, and Transgenerational Seed Germination Responses of Soybean to Temperature.

Temperature is the primary factor affecting the morpho-physiological, developmental, and yield attributes of soybean. Despite several temperature and soybean studies, functional relationships between temperature and soybean physiology and yield components are limited. An experiment was conducted to determine the optimum temperature for soybean gas exchange and yield components using indeterminate (Asgrow AG5332, AG) and determinate (Progeny P5333 RY, PR) growth habit cultivars. Plants grown outdoors were exposed to 5 day/night temperature treatments, 21/13, 25/17, 29/21, 33/25, and 37°C/29°C, from flowering to maturity using the sunlit plant growth chambers. Significant temperature and cultivar differences were recorded among all measured parameters. Gas exchange parameters declined with increasing temperature treatments during the mid-pod filling stage, and quadratic functions best described the response. The optimum temperature for soybean pod weight, number, and seed number was higher for AG than PR, indicating greater high-temperature tolerance. Soybean exposed to warmer parental temperature (37°C/29°C) during pod filling decreased significantly the transgenerational seed germination when incubated at 18, 28, and 38°C. Our findings suggest that the impact of temperature during soybean development is transferable. The warmer temperature has adverse transgenerational effects on seed germination ability. Thus, developing soybean genotypes tolerant to high temperatures will help growers to produce high-yielding and quality beans. The quantified temperature, soybean physiology, and yield components-dependent functional algorithms would be helpful to develop adaptation strategies to offset the impacts of extreme temperature events associated with future climate change.

Drought, Low Nitrogen Stress, and Ultraviolet-B Radiation Effects on Growth, Development, and Physiology of Sweetpotato Cultivars during Early Season.

Drought, ultraviolet-B (UV-B), and nitrogen stress are significant constraints for sweetpotato productivity. Their impact on plant growth and development can be acute, resulting in low productivity. Identifying phenotypes that govern stress tolerance in sweetpotatoes is highly desirable to develop elite cultivars with better yield. Ten sweetpotato cultivars were grown under nonstress (100% replacement of evapotranspiration (ET)), drought-stress (50% replacement of ET), UV-B (10 kJ), and low-nitrogen (20% LN) conditions. Various shoot and root morphological, physiological, and gas-exchange traits were measured at the early stage of the crop growth to assess its performance and association with the storage root number. All three stress factors caused significant changes in the physiological and root- and shoot-related traits. Drought stress reduced most shoot developmental traits (29%) to maintain root growth. UV-B stress increased the accumulation of plant pigments and decreased the photosynthetic rate. Low-nitrogen treatment decreased shoot growth (11%) and increased the root traits (18%). The highly stable and productive cultivars under all four treatments were identified using multitrait stability index analysis and weighted average of absolute scores (WAASB) analyses. Further, based on the total stress response indices, 'Evangeline', 'O'Henry', and 'Beauregard B-14' were identified as vigorous under drought; 'Evangeline', 'Orleans', and 'Covington' under UV-B; and 'Bonita', 'Orleans', and 'Beauregard B-14' cultivars showed greater tolerance to low nitrogen. The cultivars 'Vardaman' and 'NC05-198' recorded a low tolerance index across stress treatments. This information could help determine which plant phenotypes are desirable under stress treatment for better productivity. The cultivars identified as tolerant, sensitive, and well-adapted within and across stress treatments can be used as source materials for abiotic stress tolerance breeding programs.

Deep learning based high-throughput phenotyping of chalkiness in rice exposed to high night temperature.

BACKGROUND: Rice is a major staple food crop for more than half the world's population. As the global population is expected to reach 9.7 billion by 2050, increasing the production of high-quality rice is needed to meet the anticipated increased demand. However, global environmental changes, especially increasing temperatures, can affect grain yield and quality. Heat stress is one of the major causes of an increased proportion of chalkiness in rice, which compromises quality and reduces the market value. Researchers have identified 140 quantitative trait loci linked to chalkiness mapped across 12 chromosomes of the rice genome. However, the available genetic information acquired by employing advances in genetics has not been adequately exploited due to a lack of a reliable, rapid and high-throughput phenotyping tool to capture chalkiness. To derive extensive benefit from the genetic progress achieved, tools that facilitate high-throughput phenotyping of rice chalkiness are needed. RESULTS: We use a fully automated approach based on convolutional neural networks (CNNs) and Gradient-weighted Class Activation Mapping (Grad-CAM) to detect chalkiness in rice grain images. Specifically, we train a CNN model to distinguish between chalky and non-chalky grains and subsequently use Grad-CAM to identify the area of a grain that is indicative of the chalky class. The area identified by the Grad-CAM approach takes the form of a smooth heatmap that can be used to quantify the degree of chalkiness. Experimental results on both polished and unpolished rice grains using standard instance classification and segmentation metrics have shown that Grad-CAM can accurately identify chalky grains and detect the chalkiness area. CONCLUSIONS: We have successfully demonstrated the application of a Grad-CAM based tool to accurately capture high night temperature induced chalkiness in rice. The models trained will be made publicly available. They are easy-to-use, scalable and can be readily incorporated into ongoing rice breeding programs, without rice researchers requiring computer science or machine learning expertise.

Genetic control of source-sink relationships in grain sorghum.

MAIN CONCLUSION: QTL hotspots identified for selected source-sink-related traits provide the opportunity for pyramiding favorable alleles for improving sorghum productivity under diverse environments. A sorghum bi-parental mapping population was evaluated under six different environments at Hays and Manhattan, Kansas, USA, in 2016 and 2017, to identify genomic regions controlling source-sink relationships. The population consisted of 210 recombinant inbred lines developed from US elite post-flowering drought susceptible (RTx430) and a known post-flowering drought tolerant cultivar (SC35). Selected physiological traits related to source (effective quantum yield of photosystem II and chlorophyll index), sink (grain yield per panicle) and panicle neck diameter were recorded during grain filling. The results showed strong phenotypic and genotypic association between panicle neck diameter and grain yield per panicle during mid-grain filling and at maturity. Multiple QTL model revealed 5-12 including 2-5 major QTL for each trait. Among them 3, 7 and 8 QTL for quantum yield, panicle neck diameter and chlorophyll index, respectively, have not been identified previously in sorghum. Phenotypic variation explained by QTL identified across target traits ranged between 5.5 and 25.4%. Panicle neck diameter and grain yield per panicle were positively associated, indicating the possibility of targeting common co-localized QTL to improve both traits simultaneously through marker-assisted selection. Three major QTL hotspots, controlling multiple traits were identified on chromosome 1 (52.23-61.18 Mb), 2 (2.52-11.43 Mb) and 3 (1.32-3.95 Mb). The identified genomic regions and underlying candidate genes can be utilized in pyramiding favorable alleles for improving source-sink relationships in sorghum under diverse environments.

Sweetpotato cultivars responses to interactive effects of warming, drought, and elevated carbon dioxide.

Plants are sensitive to changes projected in climates, such as elevated carbon dioxide (eCO2), high temperature (T), and drought stress (DS), which affect crop growth, development, and yield. These stresses, either alone or in combination, affect all aspects of sweetpotato plant growth and development, including storage root development and yield. We tested three sweetpotato cultivars (Beauregard, Hatteras, and LA1188) responses to eight treatments (Control, DS, T, eCO2, DS + T, T + eCO2, DS + eCO2, DS + T + eCO2). All treatments were imposed 36 days after transplanting (DAP) and continued for 47 days. Treatments substantially affected gas exchange, photosynthetic pigments, growth, and storage root components. Cultivars differed considerably for many of the measured parameters. The most significant negative impact of DS was recorded for the shoot and root weights. The combination of DS + T had a significant negative effect on storage root parameters. eCO2 alleviated some of the damaging effects of DS and high T in sweetpotato. For instance, eCO2 alone or combined with DS increased the storage root weights by 22% or 42% across all three cultivars, respectively. Based on the stress response index, cultivar "Hatteras" was most tolerant to individual and interactive stresses, and "LA 1188" was sensitive. Our findings suggest that eCO2 negates the negative impact of T or DS on the growth and yield of sweetpotato. We identified a set of individual and interactive stress-tolerant traits that can help select stress cultivars or breed new lines for future environments.

Assessment of agro-morphological, physiological and yield traits diversity among tropical rice.

Rice (Oryza sativa L.) is an essential staple food crop, but the per acre average rice yield is less than its substantial potential in many countries. Rice breeders and growers would benefit from a robust genotypes with better morpho-physiological and yield-related traits. Here, seventy-four new rice genotypes were phenotyped over two years for their gas exchange and yield potential-related traits under Mississippi rice-growing conditions. A wide range of variability was observed among genotypes for all measured traits. Detailed phenotyping of rice genotypes revealed two key relationships that function together to contribute to yield potential under the southern US climate. The first one, grain yield, grain number, and spikelet fertility, showed considerable correlation (r = 0.45 to 0.79, p < 0.001) to harvest index. Conversely, days to anthesis had a high and negative correlation with harvest index (r = -0.79, p < 0.001), which suggests that selection for short duration genotypes with efficient partitioning could improve the yields under southern US climatic conditions. Additive response index revealed a higher positive association with yield traits (R2 = 0.59) than physiological (R2 = 0.28) and morphological traits (R2 = 0.21). Compared with the commercial genotype Rex, 21.6% and 47.3% of the rice genotypes had a higher gas exchange and yield response scores. IR08A172, IR07K142 and IR07F287 were ranked as high performers in physiological and yield response indices. Our study highlights that selection for short-duration yield-related traits with efficient sink capacity traits is desirable for future breeding programs.

Classical phenotyping and deep learning concur on genetic control of stomatal density and area in sorghum.

Stomatal density (SD) and stomatal complex area (SCA) are important traits that regulate gas exchange and abiotic stress response in plants. Despite sorghum (Sorghum bicolor) adaptation to arid conditions, the genetic potential of stomata-related traits remains unexplored due to challenges in available phenotyping methods. Hence, identifying loci that control stomatal traits is fundamental to designing strategies to breed sorghum with optimized stomatal regulation. We implemented both classical and deep learning methods to characterize genetic diversity in 311 grain sorghum accessions for stomatal traits at two different field environments. Nearly 12,000 images collected from abaxial (Ab) and adaxial (Ad) leaf surfaces revealed substantial variation in stomatal traits. Our study demonstrated significant accuracy between manual and deep learning methods in predicting SD and SCA. In sorghum, SD was 32%-39% greater on the Ab versus the Ad surface, while SCA on the Ab surface was 2%-5% smaller than on the Ad surface. Genome-Wide Association Study identified 71 genetic loci (38 were environment-specific) with significant genotype to phenotype associations for stomatal traits. Putative causal genes underlying the phenotypic variation were identified. Accessions with similar SCA but carrying contrasting haplotypes for SD were tested for stomatal conductance and carbon assimilation under field conditions. Our findings provide a foundation for further studies on the genetic and molecular mechanisms controlling stomata patterning and regulation in sorghum. An integrated physiological, deep learning, and genomic approach allowed us to unravel the genetic control of natural variation in stomata traits in sorghum, which can be applied to other plants.