RESUMO
Manganese oxide (MnO2) based aqueous zinc-ion batteries (AZIBs) are considered to be a promising battery for grid-scale energy storage. However, they usually suffer from the great challenge of capacity attenuation due to Mn dissolution and irreversible structural transformation. Herein, full use of the shortcomings is made to design high-performance cathode-free AZIBs. Manganese-based Prussian blue analog (Mn-PBA) is selected as a seed layer to provide a stable MnO2 electrodeposition surface. Thanks to the large specific surface area and manganophilic nature of Mn-PBA, the deposition/dissolution kinetics between Mn2+ and MnO2 are significantly enhanced. Systematic studies revealed the mechanism of MnO2 deposition-dissolution related to the reversible transformation of manganese oxide hydroxide and zinc hydroxide sulfate hydrate. Based on this, the developed cathode-free AZIBs exhibit outstanding rate performance (with a specific capacity of 273.7 mAh g-1 at 1 A g-1) and extraordinary cycle stability (maintaining a specific capacity of 52.3 mAh g-1 after 50 000 cycles at 20 A g-1). Furthermore, the AZIBs with non-toxic, biocompatible materials can be directly discarded after use, without causing pollution to the environment, which is expected to help achieve the sustainable development goals.
RESUMO
Layered double hydroxide (LDH) materials, despite their high theoretical capacity, exhibit significant performance degradation with increasing load due to their low conductivity. Simultaneously achieving both high capacity and high rate performance is challenging. Herein, we fabricated vertically aligned CuO nanowires in situ on the copper foam (CF) substrate by alkali-etching combined with the annealing process. Using this as a skeleton, electrochemical deposition technology was used to grow the amorphous α-phase CoNi-LDH nanosheets on its surface. Thanks to the high specific surface area of the CuO skeleton, ultrahigh loading (Ì16.36 mg cm-2) was obtained in the fabricated CF/CuO@CoNi-LDH electrode with the cactus-like hierarchical structure, which enhanced the charge transfer and ion diffusion dynamics. The CF/CuO@CoNi-LDH electrode achieved a good combination of high areal capacitance (33.5 F cm-2) and high rate performance (61% capacitance retention as the current density increases 50 times). The assembled asymmetric supercapacitor device demonstrated a maximum potential window of 0-1.6 V and an energy density of 1.7 mWh cm-2 at a power density of 4 mW cm-2. This work provides a feasible strategy for the design and fabrication of high-mass-loading LDH composites for electrochemical energy storage applications.
RESUMO
The advent of implantable bioelectronic devices offers prospective solutions toward health monitoring and disease diagnosis and treatments. However, advances in power modules have lagged far behind the tissue-integrated sensor nodes and circuit units. Here, we report a soft implantable power system that monolithically integrates wireless energy transmission and storage modules. The energy storage unit comprises biodegradable Zn-ion hybrid supercapacitors that use molybdenum sulfide (MoS2) nanosheets as cathode, ion-crosslinked alginate gel as electrolyte, and zinc foil as anode, achieving high capacitance (93.5 mF cm-2) and output voltage (1.3 V). Systematic investigations have been conducted to elucidate the charge storage mechanism of the supercapacitor and to assess the biodegradability and biocompatibility of the materials. Furthermore, the wirelessly transmitted energy can not only supply power directly to applications but also charge supercapacitors to ensure a constant, reliable power output. Its power supply capabilities have also been successfully demonstrated for controlled drug delivery.