RESUMO
Background: Calcific tendonitis is a painful shoulder disorder characterized by calcium deposits (CDs) in the rotator cuff tendon. This systematic review and meta-analysis examined the most efficient surgical procedure for calcific tendonitis. This includes the comparison between the three main surgical techniques: CD removal, CD removal with subacromial decompression (SAD) and CD removal with tendon repair with respect to functional outcomes and pain control scores. Methods: Four electronic databases (MEDLINE, EMBASE, CINAHL, and Cochrane Central Register of Controlled Trials) were searched in February 2023. Studies were eligible for inclusion if they were peer-reviewed, and participants were patients diagnosed with calcific tendonitis of one or more rotator cuff tendon based on diagnostic imaging who underwent shoulder calcific tendonitis surgery. Other shoulder pathology diagnoses were excluded. Meta-analyses were conducted for results that were sufficiently homogeneous in terms of statistical, clinical, and methodological characteristics. Subgroup analyses were performed to determine if effect sizes differed based on the patient's position during the surgery, physiotherapy, and follow-up time. Results: All surgical interventions resulted in significant improvements in shoulder function and pain control. There were no significant differences between CD removal vs. CD removal with SAD or CD removal vs. CD removal with tendon repair. However, there was a trend in favor of CD removal alone or CD removal with SAD approaches, as they provided better outcome scores than CD removal with tendon repair in terms of shoulder function and pain control. Conclusions: All surgical interventions provide substantial improvement in shoulder functions and pain control scores with no significant difference between these surgical techniques.
RESUMO
PURPOSE: The risk of posterior interosseous nerve (PIN) injury during surgical approaches to the lateral elbow varies depending on the chosen approach, level of dissection, and rotational position of the forearm. Previous studies evaluated the trajectory of the PIN in specific surgical applications to reduce iatrogenic nerve injuries. The goal of this study is to examine the location of the PIN using common lateral approaches with varying forearm rotation. METHODS: The Kaplan, extensor digitorum communis (EDC) split, and Kocher approaches were performed on 18 cadaveric upper extremity specimens. Measurements were recorded with a digital caliper from the radiocapitellar (RC) joint and the lateral epicondyle to the point where the PIN crosses the approach in full supination, neutral, and full pronation with the elbow at 90°. The ratio of the nerve's location in relation to the entire length of the radius was also evaluated to account for different-sized specimens. RESULTS: The PIN was not encountered in the Kocher interval. For Kaplan and EDC split, with the forearm in full supination, the mean distance from the lateral epicondyle to the PIN was 52.0 ± 6.1 mm and 59.1 ± 5.5 mm, respectively, and the mean distance from the RC joint to the PIN was 34.7 ± 5.5 mm and 39.3 ± 4.7 mm, respectively; with the forearm in full pronation, the mean distance from the lateral epicondyle to the PIN was 63.3 ± 9.7 mm and 71.4 ± 8.3 mm, respectively, and the mean distance from the RC joint to the PIN was 44.2 ± 7.7 mm and 51.1 ± 8.7 mm, respectively. CONCLUSIONS: The PIN is closer to the lateral epicondyle and RC joint in the Kaplan than EDC split approach and is not encountered during the Kocher approach. The PIN was not encountered within 26 mm from the RC joint and 39 mm from the lateral epicondyle in any approach and forearm position and is generally safe from iatrogenic injury within these distances.
Assuntos
Articulação do Cotovelo , Traumatismos dos Nervos Periféricos , Humanos , Antebraço/fisiologia , Cotovelo/cirurgia , Rádio (Anatomia)/cirurgia , Articulação do Cotovelo/cirurgia , Articulação do Cotovelo/fisiologia , Doença IatrogênicaRESUMO
Background: Rotator cuff tears are a common source of shoulder pain and dysfunction. An irreparable rotator cuff tear poses a particular treatment challenge. There have been few studies reporting the outcomes of lower trapezius tendon (LTT) transfer for irreparable rotator cuff injuries. Therefore, the purpose of this review is to summarize the postoperative functional outcomes and complications of patients undergoing a LTT transfer for massive irreparable rotator cuff injuries. Methods: A scoping review was performed using the Medline, Embase, Cochrane Central Register of Controlled Trials, and Google Scholar databases with the search terms "trapezius" AND "transfer." Of 362 studies included for initial screening, 37 full-text citations were reviewed, with 5 studies meeting all the inclusion criteria to be included in the review. Two reviewers extracted data on study design, patient demographics, surgical technique, functional outcomes, range of motion (ROM), and complications for each study according to the predefined criteria. Results: Improvements in the preoperative to postoperative functional status, identified using the Disabilities of the Arm, Shoulder, and Hand (50.34 to 18), The American Shoulder and Elbow Surgeons Score (48.56 to 80.24), Visual Analog Scale (5.8 to 1.89), Single Assessment Numeric Evaluation (34.22 to 69.86), and Subjective Shoulder Value (52.24 to 77.66), were evident across all 5 studies. Preoperative to postoperative increases in ROM were seen for flexion (85 to 135), external rotation (18 to 52), and abduction (50 to 98). The overall complication rate was 18%, with seroma formation (8%) as the most common postoperative complication. Discussion/Conclusion: Our analysis showed that LTT transfer improved postoperative function, ROM, and pain for patients with irreparable rotator cuff tears with an overall complication rate of 18%. Future controlled studies are required to directly compare LTT transfer to other tendon transfers and other surgical techniques for irreparable rotator cuff tears.
RESUMO
BACKGROUND: The posterior interosseous nerve (PIN) is the most commonly injured motor nerve during distal biceps tendon repair resulting in severe functional deficits. Anatomic studies of distal biceps tendon repairs have evaluated the proximity of the PIN to the anterior radial shaft in supination, but limited studies have evaluated the location of the PIN in relation to the radial tuberosity (RT), and none have examined its relation to the subcutaneous border of the ulna (SBU) with varying forearm rotation. This study evaluates the location of the PIN in relation to the RT and SBU to help guide surgeons in safe placement of the dorsal incision and the safest zones of dissection. METHODS: The PIN was dissected from arcade of Frohse to 2 cm distal to the RT in 18 cadaver specimens. Four lines were drawn perpendicular to the radial shaft at the proximal, middle, and distal aspect of and 1 cm distal to the RT in the lateral view. Measurements were recorded with a digital caliper along these lines to quantify the distance between the SBU and RT to the PIN with the forearm in neutral, supination, and pronation with the elbow at 90° flexion. Measurements were also made along the length of the radius at the volar, middle, and dorsal surfaces at the distal aspect of the RT to assess its proximity to the PIN. RESULTS: Mean distances to the PIN were greater in pronation than supination and neutral. The PIN crossed the volar surface of the distal aspect of the RT -6.9 ± 4.3 mm (-13, -3.0) in supination, -0.4 ± 5.8 mm (-9.9, 2.5) in neutral, and 8.5 ± 9.9 mm (-2.7, 13) in pronation. One centimeter distal to the RT, mean distance to the PIN was 0.54 ± 4.3 mm (-4.5, 8.8) in supination, 8.5 ± 3.1 mm (3.2, 14) in neutral, and 10 ± 2.7 mm (4.9, 16) in pronation. In pronation, mean distances from the SBU to the PIN at points A, B, C, and D were 41.3 ± 4.2, 38.1 ± 4.4, 34.9 ± 4.2, and 30.8 ± 3.9 mm, respectively. CONCLUSION: PIN location is quite variable, and to avoid iatrogenic injury during 2-incision distal biceps tendon repair, we recommend placement of the dorsal incision no more than 25 mm anterior to the SBU and carrying out deep dissection proximally first to identify the RT before continuing the dissection distally to expose the tendon footprint. The PIN was at risk of injury along the volar surface at the distal aspect of the RT in 50% with neutral rotation and 17% with full pronation.
Assuntos
Antebraço , Ferida Cirúrgica , Humanos , Antebraço/cirurgia , Antebraço/inervação , Cotovelo , Rádio (Anatomia)/cirurgia , Tendões/cirurgia , Extremidade Superior , CadáverRESUMO
Background: Finite element analysis has suggested that stemless implants may theoretically decrease stress shielding. The purpose of this study was to assess the radiographic proximal humeral bone adaptations seen following stemless anatomic total shoulder arthroplasty. Methods: A retrospective review of 152 prospectively followed stemless total shoulder arthroplasty utilizing a single implant design was performed. Anteroposterior and lateral radiographs were reviewed at standard time points. Stress shielding was graded as mild, moderate, and severe. The effect of stress shielding on clinical and functional outcomes was assessed. Also, the influence of subscapularis management on the occurrence of stress shielding was determined. Results: At 2 years postoperatively, stress shielding was noted in 61 (41%) shoulders. A total of 11 (7%) shoulders demonstrated severe stress shielding with 6 occurring along the medial calcar. There was one instance of greater tuberosity resorption. At the final follow-up, no humeral implants were radiographically loose or migrated. There was no statistically significant difference in clinical and functional outcomes between shoulders with and without stress shielding. Patients undergoing a lesser tuberosity osteotomy had lower rates of stress shielding, which was statistically significant (p = 0.021). Discussion: Stress shielding does occur at higher rates than anticipated following stemless total shoulder arthroplasty, but was not associated with implant migration or failure at 2 years follow-up. Level of evidence: IV, Case series.
RESUMO
BACKGROUND: The nature of tasks required by hand surgeons require both forceful and repetitive maneuvers, thus subjecting these surgeons to the risk of musculoskeletal (MSK) injuries during their years in practice. AIM: To assess the prevalence, characteristics and impact of MSK disorders among hand surgeons. METHODS: A modified version of the physical discomfort survey was sent to surgeons who were members of the American Society for Surgery of the Hand via e-mail. The collected data were analyzed using descriptive statistics, one-way analysis of variance, and Fisher's exact test. P values of < 0.05 were considered statistically significant. RESULTS: Of the 578 respondents, 60.4% reported that they had sustained a work-related MSK injury, of which the most common diagnoses were lateral elbow epicondylitis (18.7%), low back pain (17.1%) and carpal tunnel syndrome (15.6%). Among those that reported an injury, 73.1 % required treatment and 29.2 % needed time off work as a direct result of their injury. The number of work-related injuries incurred by a surgeon increased significantly with increasing age (P < 0.003), increasing years in practice (P < 0.001) and higher case load (P < 0.05). CONCLUSION: To our knowledge this study is the first of its kind to assess MSK injuries sustained by Hand surgeons with a high incidence. These results should increase awareness on this aspect and fuel future studies directed at preventing these types of work-related injuries, thus minimizing the financial and psychological burden on these surgeons and the healthcare system.
RESUMO
BACKGROUND: Elbow fracture dislocations are complex injuries that often require surgical treatment in order to obtain a stable and congruent elbow joint. The coronoid plays a key role in the stability of this joint. Accurately identifying the degree of coronoid bone loss in the setting of traumatic elbow injuries is challenging. The purpose of this study is to describe a new radiographic measure, the coronoid opening angle (COA), to assist in estimating bone loss in these challenging fractures. METHODS: Radiographs were drawn from a regional database in a consecutive fashion. Candidate radiographs were excluded on the basis of radiographic evidence of degenerative changes, previous surgery or injury, bony deformity, and inadequate lateral view of the elbow. Normal COA, coronoid height, and calculated COA at varying amounts of bone loss were determined by 3 reviewers. RESULTS: A total of 120 subjects were included. The normal coronoid opening angle was 34° (95% CI 32.9°-34.0°) and the coronoid height, 18.8 mm (18.1-19.6). Ninety-five percent of the population had an opening angle greater than 29° (95% CI 27.2°-29°). The COA limit was calculated at 20%, 33%, and 50% of baseline coronoid height corresponding to degree of bone loss. Coronoid opening angles of 24°, 20°, and 16°, respectively, indicate the minimum bone loss of interest in 95% of the population. The intraclass correlation coefficient was found to be 0.89 or higher. CONCLUSION: In the setting of elbow trauma, it is often challenging to predict the amount of coronoid bone loss. The coronoid opening angle is a new technique and an adjunct for lateral elbow radiographs to predict the minimum coronoid bone loss. This can be used to guide clinical decision making, aid in predicting instability, and guide treatment. Future research will aim to validate this tool in the clinical trauma setting.
Assuntos
Lesões no Cotovelo , Articulação do Cotovelo , Fratura-Luxação , Fraturas Ósseas , Luxações Articulares , Fraturas do Rádio , Fraturas da Ulna , Humanos , Cotovelo , Articulação do Cotovelo/diagnóstico por imagem , Articulação do Cotovelo/cirurgia , Fraturas Ósseas/complicações , Fraturas Ósseas/diagnóstico por imagem , Fraturas Ósseas/cirurgia , Luxações Articulares/diagnóstico por imagem , Luxações Articulares/cirurgia , Fraturas do Rádio/complicações , Fraturas do Rádio/diagnóstico por imagem , Fraturas do Rádio/cirurgia , Amplitude de Movimento Articular , Resultado do Tratamento , Fraturas da Ulna/complicações , Fraturas da Ulna/diagnóstico por imagem , Fraturas da Ulna/cirurgiaRESUMO
BACKGROUND: The use of stemless humeral implants for shoulder arthroplasty is becoming increasingly widespread. However, little is known about the difference in clinical, functional, and radiographic outcomes of stemless shoulder arthroplasty between men and women. Men and women do have reported differences in size, strength, and bone quality. As such, the purpose of this study was to evaluate sex-related differences in outcomes when using stemless humeral implants. METHODS: A retrospective review of 227 patients (men = 143 and women = 84) undergoing stemless shoulder arthroplasty was compared for sex-related differences. Clinical, functional, and radiographic outcomes were compared, including American Shoulder and Elbow Surgeons (ASES) scores, visual analog scale pain scores, range of motion, radiolucencies, operative data, implant data, and complications. Statistical analysis included descriptive statistics, t-tests, chi-square tests, and logistic regression. RESULTS: Preoperatively, men had a statistically significant greater range of motion of forward elevation (P < .01), external rotation (ER) at adduction (P = .04), ER at 90° abduction (P = .03), and baseline ASES scores (P < .01). At 2 years, there were no differences between men and women in ASES score (P = .12), visual analog scale pain score (P = .74), active ER (P = .98), implant migration, or radiolucencies (P > .99). Mean operating time was 9 minutes longer in male patients (P < .01). There was no significant difference in surgical complications, including dislocation, fracture, infection, or loosening. The three-year revision-free survival was 98.8% for women and 97.9% for men. CONCLUSION: Patient sex is not predictive of postoperative functional outcomes after stemless shoulder arthroplasty. The operative time was significantly shorter in female patients, and there was no significant difference in surgical complications between men and women.
RESUMO
BACKGROUND: To improve implant survival after reverse shoulder arthroplasty (RSA), surgeons need to maximize screw fixation. However, bone density variation and distribution within the scapula are not well understood as they relate to RSA. The three columns of bone in the scapula surrounding the glenoid fossa are the lateral border, the base of the coracoid process, and the spine of the scapula. In our previous study by Daalder et al on cadaveric specimens, the coracoid column was significantly less dense than the lateral border and spine. This study's objective was to verify whether these results are consistent with computer tomography (CT) scan information from patients undergoing RSA. METHODS: Two-dimensional axial CT images from twelve patients were segmented, and a three-dimensional digital model of the scapula was subsequently created using Mimics 17.0 Materialise Software (Leuven, Belgium). Hounsfield unit (HU) values representing cortical bone were filtered out to determine the distributions of trabecular bone density. An analysis of variance with post hoc Bonferroni tests determined the differences in bone density between the columns of bone in the scapula. RESULTS: The coracoid superolateral (270 ± 45.6 HU) to the suprascapular notch was significantly less dense than the inferior (356 ± 63.6 HU, P = .03, ds = 1.54) and anterosuperior portion of the lateral border (353 ± 68.9 HU, P = .04, ds = 1.42) and the posterior (368 ± 70 HU, P = .007, ds = 1.65) and anterior spine (370 ± 78.9 HU, P = .006, ds = 1.54). DISCUSSION/CONCLUSION: The higher-density bone in the spine and lateral border compared with the coracoid region may provide better bone purchase for screws when fixing the glenoid baseplate in RSA. This is in agreement with our previous study and indicates that the previous cadaveric results are applicable to clinical CT scan data. When these studies are taken together, they provide robust evidence for clinical applications, including having surgeons aim screws for higher-density regions to increase screw fixation, which may decrease micromotion and improve implant longevity.
RESUMO
BACKGROUND: Reverse shoulder arthroplasty (RSA) is commonly used to treat patients with rotator cuff tear arthropathy. Loosening of the glenoid component remains one of the principal modes of failure and represents a significant complication that requires revision surgery. This study assessed the effects of various factors on glenoid baseplate micromotion for primary fixation of RSA. MATERIALS AND METHODS: A half-fractional factorial design of experiment was used to assess 4 factors: central element type (central peg or screw), central cortical engagement according to length (13.5 or 23.5 mm), anterior-posterior peripheral screw type (nonlocking or locking), and cancellous bone surrogate density (160 or 400 kg/m3, 10 or 25 PCF). Glenoid baseplates were implanted into high- or low-density Sawbones rigid polyurethane foam blocks and cyclically loaded at 60° for 1000 cycles (500-N compressive force range) using a custom-designed loading apparatus. Micromotion at the 4 peripheral screw positions was recorded using linear variable differential transformers. RESULTS: Central peg fixation generated 358% greater micromotion at all peripheral screw positions compared with central screw fixation (P < .001). Baseplates with short central elements that lacked cortical bone engagement generated 328% greater micromotion than those with long central elements (P = .001). No significant effects were observed when varying anterior-posterior peripheral screw type or bone surrogate density. There were significant interactions between central element type and length (P < .001). DISCUSSION: A central screw and a long central element that engaged cortical bone reduced RSA baseplate micromotion. These findings serve to inform surgical decision making regarding baseplate fixation elements to minimize the risk of glenoid loosening and, thus, the need for revision surgery.
Assuntos
Artroplastia do Ombro , Cavidade Glenoide , Articulação do Ombro , Artroplastia , Fenômenos Biomecânicos , Cavidade Glenoide/cirurgia , Humanos , Escápula/cirurgia , Articulação do Ombro/cirurgiaRESUMO
Background: The terrible triad injury (TTI) of the elbow is a combination of a posterolateral dislocation of the elbow joint combined with fractures of the radial head and coronoid process most often caused by a fall on an outstretched hand. The injury pattern was named for its poor outcomes and high complication rates following surgical repair, but increased understanding of elbow anatomy and biomechanics has led to the development of standardized surgical protocols in an attempt to improve outcomes. Most existing literature on terrible triad injuries is from small retrospective cohort studies and surgical techniques to improve outcomes. Therefore, the purpose of this scoping review is to provide an overview of the functional outcomes, prognosis, and complications following current surgical treatment of TTIs. Methods: A scoping review was performed to evaluate the literature. In total, 617 studies were identified and screened by 2 reviewers, with 43 studies included for qualitative analysis. These 43 studies underwent data extraction for functional outcomes using the Mayo Elbow Performance Score (MEPS) and Disabilities of the Arm, Shoulder, and Hand score (DASH) and were stratified accordingly. Secondary outcome measures assessed in the study were a range of motion (ROM) and complication rate. Results: The average MEPS was 90 (excellent) from a total of 37 studies with 1609 patients, and the average DASH score was 16 from 16 studies with 441 patients. Another 6 studies with a total of 127 patients reported a mean Q-DASH score of 13. A total of 39 studies consisting of 1637 patients had a mean forearm rotation of 135 degrees, and 36 studies consisting of 1606 patients had a mean flexion-extension arc of 113 degrees. Among the studies, there was a 30% complication rate with a need for revision surgery in 7.8% of cases. The most common complications were radiographic evidence of heterotopic ossification (11%) and ulnar nerve neuropathy (2.6%). Discussion/Conclusions: This study shows that current surgical treatment for terrible triad injuries has resulted in improved outcomes. Based on primary outcome measures using MEPS and DASH scores, almost all of the studies have highlighted good or excellent functional outcomes. This highlighted the marked improvement in outcome scores since the term was coined, suggesting that terrible triad injuries may no longer be so terrible.
RESUMO
BACKGROUND: Work-related injuries have gained recent attention, especially in the orthopaedic literature. As upper extremity orthopaedic surgical tasks require repetitive and constant maneuvers, these surgeons can be at increased risk of acquiring work-related musculoskeletal (MSK) disorders during their years in practice. AIM: To assess the prevalence, characteristics and impact of MSK disorders among upper extremity orthopaedic surgeons. METHODS: A modified version of the physical discomfort survey was sent to surgeons who were members of the American Shoulder and Elbow Surgeons and the Canadian shoulder and elbow society via e-mail. The collected data were analyzed using descriptive statistics, one-way analysis of variance, and Fisher's exact test. P values of < 0.05 were considered statistically significant. RESULTS: Of the 142 respondents, 90.8% were males and the majority were younger than 55 years old (65.5%). A work-related MSK injury was reported by 89.4% of respondents, of which the most common diagnoses were low back pain (26.1%) and lateral elbow epicondylitis (18.3%). Among those that reported an injury, 82.7% required treatment and 26% required time off work as a direct result of their injury. The need to undergo treatment due to the injury was associated with increased number of injuries (P < 0.01). Moreover, surgeons were more likely to require time off work when they had been in practice for > 21 years (P < 0.05). CONCLUSION: A high proportion of surgeons in our survey reported MSK injuries, with more than one quarter of surgeons reported requiring time off work due to an MSK injury. The high incidence of these disorders may place a financial and psychological burden on surgeons and affect their ability to provide patient care. Awareness of operative ergonomics, irrespective of surgical specialty may help to decrease or possibly prevent the occurrence of these disorders.
RESUMO
BACKGROUND: Patients with complete rotator cuff tears who fail a course of nonoperative therapy can benefit from surgical repair. PURPOSE: This randomized trial compared mini-open (MO) versus all-arthroscopic (AA) rotator cuff repair. STUDY DESIGN: Randomized controlled trial; Level of evidence, 1. METHODS: Patients with rotator cuff tears were randomized to undergo MO or AA repair at 9 centers by 23 surgeons. The primary outcome (Western Ontario Rotator Cuff Index [WORC]) and secondary outcomes (American Shoulder and Elbow Surgeons [ASES] score, Shoulder Pain and Disability Index [SPADI] pain subscale, 12-Item Short Form Health Survey [SF-12], reported medication use, adverse events), as well as measurements of range of motion and strength, were collected at 1 month before surgery; at 2 and 6 weeks postoperatively; and at 3, 6, 12, 18, and 24 months postoperatively. A blinded radiologist evaluated rotator cuff integrity on magnetic resonance imaging (MRI) at baseline and 1 year. Intention-to-treat analysis of covariance with the preoperative WORC score, age, and tear size as covariates assessed continuous outcomes. Sex differences were assessed. A meta-analysis synthesized the primary outcome between MO and AA repair with previous trials. RESULTS: From 954 patients screened, 411 were ineligible (276 because of recovery with physical therapy), 449 were screened at surgery (175 ineligible), and 274 completed follow-up (138 MO and 136 AA). The AA and MO groups were similar before surgery. WORC scores improved from 40 preoperatively to 89 (AA) and 93 (MO) at 2 years, for an adjusted mean difference of 3.4 (95% CI, -0.4 to 7.2). There were no statistically significant differences between the AA and MO groups at any time point. All secondary patient-reported outcomes were not significantly different between the MO and AA groups, except the 2-year SPADI pain score (8 vs 12, respectively; P = .02). A similar recovery in range of motion and strength occurred in both groups over time. MRI indicated minimal improvement in muscle relative to fat (AA: n = 3; MO: n = 2), with most worsening (AA: n = 25; MO: n = 24) or remaining unchanged (AA: n = 70; MO: n = 70). Opioid use was significantly reduced after surgery (from 21% to 5%). The meta-analysis indicated no significant standardized mean difference between groups in the primary outcome across all pooled studies (standardized mean difference, -0.06 [95% CI, -0.34 to 0.22]). CONCLUSION: Both AA and MO rotator cuff repair provide large clinical benefits, with few adverse events. There is strong evidence of equivalent clinical improvements. TRIAL REGISTRATION: NCT00128076.
Assuntos
Lesões do Manguito Rotador , Manguito Rotador , Artroscopia , Feminino , Humanos , Masculino , Metanálise como Assunto , Amplitude de Movimento Articular , Manguito Rotador/diagnóstico por imagem , Manguito Rotador/cirurgia , Lesões do Manguito Rotador/cirurgia , Resultado do TratamentoRESUMO
BACKGROUND: The purpose of this multicenter, prospective study was to evaluate the efficacy and safety of a stemless total shoulder arthroplasty compared with a traditional stemmed control. METHODS: Ninety-five shoulders were selected for participation in this Food and Drug Administration investigational device exemption clinical trial and underwent stemless total shoulder arthroplasty. Subjects returned for follow-up at 6 weeks, 6 months, 12 months, and 2 years postoperatively. Outcome measures included pain; range of motion; American Shoulder and Elbow Surgeons, Western Ontario Osteoarthritis of the Shoulder, and Short Form 12 scores; and radiographic review. Baseline data were compared with 2-year follow-up data to determine the rate of composite clinical success compared with the stemmed control. RESULTS: All outcome assessments demonstrated significant improvements (P ≤ .007). The mean American Shoulder and Elbow Surgeons score improved from 20 to 89 (P < .0001), and the mean shoulder pain score decreased from 8.3 ± 1.6 to 0.7 ± 1.5 (P < .0001). The mean Western Ontario Osteoarthritis of the Shoulder score decreased from 1443 ± 256 to 203 ± 267 (P < .0001). On the Short Form 12, the mean physical health score increased from 33 ± 7 to 48 ± 9 (P < .0001) and the mean mental health score increased from 50 ± 13 to 54 ± 8 (P = .007). Mean active forward elevation increased from 97° ± 27° to 143° ± 25° (P < .0001), and mean active external rotation increased from 21° ± 16° to 53° ± 18° (P < .0001). Kaplan-Meier analysis showed an implant survivorship rate of 98% at 2 years. The composite clinical success rate was 87% compared with 85% for the stemmed control. CONCLUSIONS: This study showed that a stemless rough-blasted humeral implant with metaphyseal bone fixation provides good clinical and radiographic outcomes and survivorship at 2 years, with outcomes comparable to a traditional stemmed implant.
RESUMO
BACKGROUND: Numerous studies have reported an association between rotator cuff injury and two-dimensional measures of scapular morphology. However, the mechanical underpinnings explaining how these shape features affect glenohumeral joint function and lead to injury are poorly understood. We hypothesized that three-dimensional features of scapular morphology differentiate asymptomatic shoulders from those with rotator cuff tears, and that these features would alter the mechanical advantage of the supraspinatus. METHODS: Twenty-four individuals with supraspinatus tears and twenty-seven age-matched controls were recruited. A statistical shape analysis identified scapular features distinguishing symptomatic patients from asymptomatic controls. We examined the effect of injury-associated morphology on mechanics by developing a morphable model driven by six degree-of-freedom biplanar videoradiography data. We used the model to simulate abduction for a range of shapes and computed the supraspinatus moment arm. FINDINGS: Rotator cuff injury was associated with a cranial orientation of the glenoid and scapular spine (P = .011, d = 0.75) and/or decreased subacromial space (P = .001, d = 0.94). The shape analysis also identified previously undocumented features associated with superior inclination and subacromial narrowing. In our computational model, warping the scapula from a cranial to a lateral orientation increased the supraspinatus moment arm at 20° of abduction and decreased the moment arm at 160° of abduction. INTERPRETATIONS: Three-dimensional analysis of scapular morphology indicates a stronger relationship between morphology and cuff tears than two-dimensional measures. Insight into how morphological features affect rotator cuff mechanics may improve patient-specific strategies for prevention and treatment of cuff tears.
Assuntos
Fenômenos Mecânicos , Lesões do Manguito Rotador/patologia , Lesões do Manguito Rotador/fisiopatologia , Manguito Rotador/patologia , Manguito Rotador/fisiopatologia , Idoso , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Movimento , Articulação do Ombro/fisiopatologiaRESUMO
BACKGROUND: Long-term function and survival of reverse shoulder arthroplasties (RSAs) are reliant on component positioning and fixation. Conventional postoperative analysis is performed using plain radiographs or 2-dimensional (2D) computed tomography (CT) images. Although 3-dimensional (3D) CT would be preferred, its use is limited by metal artifacts. This study proposes a new 3D CT method for postoperative RSA evaluation and compares its interobserver reliability with conventional methods. MATERIALS AND METHODS: Preoperative and postoperative CT scans, as well as postoperative radiographs, were obtained from 18 patients who underwent RSA implantation; the scapula, implant, and screws were reconstructed as 3D CT models. The postoperative 3D scapula and implant were imported into preoperative coordinates and matched to the preoperative scapula. Standardized scapula coordinates were defined, in which the glenoid baseplate version and inclination angle were measured. The percentage of screw volume in bone was measured from a Boolean intersection operation between the preoperative scapula and screw models. Four independent reviewers performed the measurements using 3D CT and conventional 2D methods. Intraclass correlation coefficients (ICCs) were used to compare the reliability of the methods. RESULTS: The 3D CT method showed excellent reliability (ICC > 0.75) in baseplate inclination (ICC = 0.92), version (ICC = 0.97), and screw volume in bone (ICC = 0.99). Conventional 2D methods demonstrated poor reliability (ICC < 0.4). For radiographs, inclination showed poor reliability (ICC = 0.09) and the screw percentage in bone showed fair reliability (ICC = 0.54). Version was not measured with plain radiographs. For 2D CT slice measurements, inclination showed poor reliability (ICC = 0.02), version showed excellent reliability (ICC = 0.81), and the screw percentage in bone showed poor reliability (ICC = 0.28). CONCLUSION: The new 3D CT-based method for evaluating RSA glenoid implant positioning and screw volume in bone showed excellent reliability and overcame the metal-artifact limitation of postoperative CT and 3D CT reconstruction.
RESUMO
BACKGROUND: It is unknown whether subscapularis management technique has an influence on the outcomes and complications of stemless total shoulder arthroplasty. The purpose of this study, therefore, was to compare outcomes and complications between subscapularis tenotomy, peel, and lesser tuberosity osteotomy used during stemless shoulder arthroplasty. METHODS: We reviewed 188 stemless anatomic total shoulder arthroplasties and compared clinical and functional outcomes between those performed through a subscapularis tenotomy (n = 68), subscapularis peel (n = 65), or lesser tuberosity osteotomy (n = 55). Patients were followed up clinically and radiographically at 6 months, 1 year, and 2 years postoperatively. RESULTS: At 2 years postoperatively, no statistically significant differences in visual analog scale pain scores, American Shoulder and Elbow Surgeons scores, or patient-reported instability (P ≥ .19) were found between groups. Active external rotation was greater in the peel group (P = .006) than in the tenotomy group but was not different compared with the lesser tuberosity osteotomy group (P = .07). No statistically significant difference in clinical subscapularis failures was noted between groups (P = .11); however, 2 patients in the peel group sustained a subscapularis failure requiring reoperation. DISCUSSION: The results of this multicenter comparative analysis show that all 3 subscapularis management techniques are effective and safe in the short term when used with stemless anatomic total shoulder arthroplasty.
Assuntos
Artroplastia do Ombro/métodos , Úmero/cirurgia , Manguito Rotador/cirurgia , Articulação do Ombro/fisiopatologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Artroplastia do Ombro/efeitos adversos , Artroplastia do Ombro/instrumentação , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Osteotomia/efeitos adversos , Medição da Dor , Reoperação , Rotação , Articulação do Ombro/cirurgia , Dor de Ombro/etiologia , Prótese de Ombro , Tenotomia/efeitos adversosRESUMO
BACKGROUND: Reverse shoulder arthroplasty (RSA) is typically performed in patients with cuff tear arthropathy. A common type of RSA baseplate has a central peg and 4 peripheral screws inserting into the glenoid surface. Baseplate failure is a significant postoperative complication that reduces prosthetic longevity and usually requires revision surgery. This study evaluated the contribution of mechanical factors on initial baseplate fixation. MATERIALS AND METHODS: This study simulated glenoid baseplate loading in a RSA. A half-fractional factorial design was used to test 5 factors: bone density (160 or 400 kg/m3), screw length (18 or 36 mm), number of screws (2 or 4), screw angle (neutral or diverging), and central peg length (13.5 or 23.5 mm). Trials were cyclically loaded at a 60° angle with 500 N for 1000 cycles. Micromotion at 4 peripheral screw positions was analyzed using a multifactorial analysis of variance (P < .05). RESULTS: We found an increase in micromotion with 3 scenarios: (1) lower bone density at all screw positions; (2) shorter central peg length at the inferior, superior and anterior screws; and (3) shorter screw length at the inferior and anterior screws. There were interactions between bone density and screw length at the inferior and anterior screws and between bone density and central peg length at the inferior, superior, and anterior screws. DISCUSSION: Greater bone density, a longer central peg, and longer screws provide improved initial glenoid fixation in an RSA, whereas the number of screws, and the angle of screw insertion do not. These findings may help minimize baseplate failure and revision operations.
Assuntos
Artroplastia do Ombro/efeitos adversos , Artroplastia do Ombro/instrumentação , Movimento (Física) , Falha de Prótese/etiologia , Prótese de Ombro/efeitos adversos , Fenômenos Biomecânicos , Densidade Óssea , Parafusos Ósseos , Cavidade Glenoide , Humanos , Desenho de Prótese , Fatores de RiscoRESUMO
Purpose: Fixation methods for consistent anatomical structure positioning in biomechanical testing can be challenging. Image-based 3D printing is an attractive method for fabrication of biomechanical supports of anatomical structure due to its ability to precisely locate anatomical features with respect to the loading system. Method: A case study is presented to provide a design guide for fixation block fabrication. The anatomy of interest was CT scanned and reconstructed in 3D. The model was imported into commercially available CAD software and modified into a solid object and to create the fixture block. The CAD fixture block is standardized such that anatomical features are always in the same position for the testing system by subtracting the anatomy from a base fixture block. Results: This method allowed a strong immobilization of anatomical specimens and a controlled and consistent positioning feature with respect to the testing system. Furthermore, the fixture block can be easily modified and adapted to anatomical structures of interest using CAD software. Conclusion: This approach allows preservation of the bony anatomy integrity and provides a repeatable and consistent anatomical positioning with respect to the testing system. It can be adapted for other anatomical structures in various other biomechanical settings.