New Minerals from Inclusions in Corundum Xenocrysts from Mt. Carmel, Israel: Magnéliite, Ziroite, Sassite, Mizraite-(Ce) and Yeite.

Our nanomineralogical investigation of melt inclusions in corundum xenocrysts from the Mt. Carmel area, Israel has revealed seven IMA-approved new minerals since 2021. We report here four new oxide minerals and one new alloy mineral. Magnéliite (Ti3+2Ti4+2O7; IMA 2021-111) occurs as subhedral crystals, ~4 µm in size, with alabandite, zirconolite, Ti,Al,Zr-oxide, and hibonite in corundum Grain 767-1. Magnéliite has an empirical formula (Ti3+1.66Al0.13Ti4+0.15Mg0.10Ca0.01Sc0.01)Σ2.06 (Ti4+1.93Zr0.08)Σ2.01O7 and the triclinic P1¯ Ti4O7-type structure with the cell parameters: a = 5.60(1) Å, b = 7.13(1) Å, c = 12.47(1) Å, α = 95.1(1)°, ß = 95.2(1)°, γ = 108.7(1)°, V = 466(2) Å3, Z = 4. Ziroite (ZrO2; IMA 2022-013) occurs as irregular crystals, ~1-4 µm in size, with baddeleyite, hibonite, and Ti,Al,Zr-oxide in corundum Grain 479-1a. Ziroite has an empirical formula (Zr0.72Ti4+0.26Mg0.02Al0.02Hf0.01)Σ1.03O2 and the tetragonal P42/nmc zirconia(HT)-type structure with the cell parameters: a = 3.60(1) Å, c = 5.18(1) Å, V = 67.1(3) Å3, Z = 2. Sassite (Ti3+2Ti4+O5; IMA 2022-014) occurs as subhedral-euhedral crystals, ~4-16 µm in size, with Ti,Al,Zr-oxide, mullite, osbornite, baddeleyite, alabandite, and glass in corundum Grain 1125C1. Sassite has an empirical formula (Ti3+1.35Al0.49Ti4+0.08Mg0.07)Σ1.99(Ti4+0.93Zr0.06Si0.01)Σ1.00O5 and the orthorhombic Cmcm pseudobrookite-type structure with the cell parameters: a = 3.80(1) Å, b = 9.85(1) Å, c = 9.99(1) Å, V = 374(1) Å3, Z = 4. Mizraite-(Ce) (Ce(Al11Mg)O19; IMA 2022-027) occurs as euhedral crystals, <1-14 µm in size, with Ce-silicate, Ti-sulfide, Ti,Al,Zr-oxide, ziroite, and thorianite in corundum Grain 198-8. Mizraite-(Ce) has an empirical formula (Ce0.76Ca0.10La0.07Nd0.01)Σ0.94(Al10.43Mg0.84Ti3+0.60Si0.09Zr0.04)Σ12.00O19 and the hexagonal P63/mmc magnetoplumbite-type structure with the cell parameters: a = 5.61(1) Å, c = 22.29(1) Å, V = 608(2) Å3, Z = 2. Yeite (TiSi; IMA 2022-079) occurs as irregular-subhedral crystals, 1.2-3.5 µm in size, along with wenjiite (Ti5Si3) and zhiqinite (TiSi2) in Ti-Si alloy inclusions in corundum Grain 198c. Yeite has an empirical formula (Ti0.995Mn0.003V0.001Cr0.001)(Si0.996P0.004) and the orthorhombic Pnma FeB-type structure with the cell parameters: a = 6.55(1) Å, b = 3.64(1) Å, c = 4.99(1) Å, V = 119.0(4) Å3, Z = 4. The five minerals are high-temperature oxide or alloy phases, formed in melt pockets in corundum xenocrysts derived from the upper mantle beneath Mt. Carmel.

Cubic Fe-bearing majorite synthesized at 18-25 GPa and 1000 °C: implications for element transport, subducted slab rheology and diamond formation.

The chemistry and mineralogy of slabs subducted into lower mantle control slab rheology and impact the deep volatile cycle. It is known that the metamorphism of little-altered oceanic crust results in eclogite rocks with subequal proportions of garnet and clinopyroxene. With increasing pressure, these minerals react to stabilize pyrope-rich tetragonal majoritic garnet. However, some eclogites contain higher proportions of omphacitic clinopyroxene, caused by Na- and Si-rich metasomatism on the ocean floor or during subduction. The mineralogy of such eclogites is expected to evolve differently. Here, we discuss the results of the crystallization products of omphacitic glass at ~ 18 and ~ 25 GPa and 1000 °C to simulate P-T regimes of cold subduction. The full characterization of the recovered samples indicates evidence of crystallization of Na-, Si-rich cubic instead of tetragonal majorite. This cubic majorite can incorporate large amounts of ferric iron, promoting redox reactions with surrounding volatile-bearing fluids and, ultimately, diamond formation. In addition, the occurrence of cubic majorite in the slab would affect the local density, favoring the continued buoyancy of the slab as previously proposed by seismic observations. Attention must be paid to omphacitic inclusions in sublithospheric diamonds as these might have experienced back-transformation from the HP isochemical cubic phase.

Kanatzidisite: A Natural Compound with Distinctive van der Waals Heterolayered Architecture.

New minerals have long been a source of inspiration for the design and discovery. Many quantum materials, including superconductors, quantum spin liquids, and topological materials, have been unveiled through mineral samples with unusual structure types. In this report, we present kanatzidisite, a new naturally occurring material with formula [BiSbS3]2[Te2] and monoclinic symmetry (space group of P21/m) with lattice parameters a = 4.0021(5) Å, b = 3.9963(5) Å, c = 21.1009(10) Å, and ß = 95.392(3)°. The mineral exhibits a unique structure consisting of alternating BiSbS3 double van der Waals layers and distorted [Te] square nets essentially forming an array of parallel zigzag Te chains. Our theoretical calculations suggest that the band structure of kanatzidisite may exhibit topological features characteristic of a Dirac semimetal.

Extreme redox variations in a superdeep diamond from a subducted slab.

The introduction of volatile-rich subducting slabs to the mantle may locally generate large redox gradients, affecting phase stability, element partitioning and volatile speciation1. Here we investigate the redox conditions of the deep mantle recorded in inclusions in a diamond from Kankan, Guinea. Enstatite (former bridgmanite), ferropericlase and a uniquely Mg-rich olivine (Mg# 99.9) inclusion indicate formation in highly variable redox conditions near the 660 km seismic discontinuity. We propose a model involving dehydration, rehydration and dehydration in the underside of a warming slab at the transition zone-lower mantle boundary. Fluid liberated by dehydration in a crumpled slab, driven by heating from the lower mantle, ascends into the cooler interior of the slab, where the H2O is sequestered in new hydrous minerals. Consequent fractionation of the remaining fluid produces extremely reducing conditions, forming Mg-end-member ringwoodite. This fractionating fluid also precipitates the host diamond. With continued heating, ringwoodite in the slab surrounding the diamond forms bridgmanite and ferropericlase, which is trapped as the diamond grows in hydrous fluids produced by dehydration of the warming slab.

Electrical discharge triggers quasicrystal formation in an eolian dune.

We report the discovery of a dodecagonal quasicrystal Mn72.3Si15.6Cr9.7Al1.8Ni0.6-composed of a periodic stacking of atomic planes with quasiperiodic translational order and 12-fold symmetry along the two directions perpendicular to the planes-accidentally formed by an electrical discharge event in an eolian dune in the Sand Hills near Hyannis, Nebraska, United States. The quasicrystal, coexisting with a cubic crystalline phase with composition Mn68.9Si19.9Ni7.6Cr2.2Al1.4, was found in a fulgurite consisting predominantly of fused and melted sand along with traces of melted conductor metal from a nearby downed power line. The fulgurite may have been created by a lightning strike that combined sand with material from downed power line or from electrical discharges from the downed power line alone. Extreme temperatures of at least 1,710 °C were reached, as indicated by the presence of SiO2 glass in the sample. The dodecagonal quasicrystal is an example of a quasicrystal of any kind formed by electrical discharge, suggesting other places to search for quasicrystals on Earth or in space and for synthesizing them in the laboratory.

Routes to reduction of phosphate by high-energy events.

Phosphate minerals such as those in the apatite group tend to be the dominant forms of phosphorus in minerals on the Earth's surface. Phosphate can be reduced to phosphides during high-energy events, such as lightning and impacts. Here we show that, in addition to formation of metal phosphides, a new compound was formed by lightning in a fulgurite from New Port Richey, Florida, USA. A calcium phosphite material, ideally CaHPO3, was found in spherules mainly consisting of iron silicides that formed by lightning-induced fusion of sand around a tree root. This phosphite material bears a phosphorus oxidation state intermediate of that of phosphides and phosphates in a geologic sample and implicates phosphites as being potentially relevant to other high-energy events where phosphorus may partially change its redox state, and material similar to this phosphite may also be the source of phosphite that makes up part of the phosphorus biogeochemical cycle.

Accidental synthesis of a previously unknown quasicrystal in the first atomic bomb test.

The first test explosion of a nuclear bomb, the Trinity test of 16 July 1945, resulted in the fusion of surrounding sand, the test tower, and copper transmission lines into a glassy material known as "trinitite." Here, we report the discovery, in a sample of red trinitite, of a hitherto unknown composition of icosahedral quasicrystal, Si61Cu30Ca7Fe2 It represents the oldest extant anthropogenic quasicrystal currently known, with the distinctive property that its precise time of creation is indelibly etched in history. Like the naturally formed quasicrystals found in the Khatyrka meteorite and experimental shock syntheses of quasicrystals, the anthropogenic quasicrystals in red trinitite demonstrate that transient extreme pressure-temperature conditions are suitable for the synthesis of quasicrystals and for the discovery of new quasicrystal-forming systems.

Insight into the structure of decagonite - the extraterrestrial decagonal quasicrystal.

A set of X-ray data collected on a fragment of decagonite, Al71Ni24Fe5, the only known natural decagonal quasicrystal found in a meteorite formed at the beginning of the Solar System, allowed us to determine the first structural model for a natural quasicrystal. It is a two-layer structure with decagonal columnar clusters arranged according to the pentagonal Penrose tiling. The structural model showed peculiarities and slight differences with respect to those obtained for other synthetic decagonal quasicrystals. Interestingly, decagonite is found to exhibit low linear phason strain and a high degree of perfection despite the fact it was formed under conditions very far from those used in the laboratory.

Evidence for complex iron oxides in the deep mantle from FeNi(Cu) inclusions in superdeep diamond.

The recent discovery in high-pressure experiments of compounds stable to 24-26 GPa with Fe4O5, Fe5O6, Fe7O9, and Fe9O11 stoichiometry has raised questions about their existence within the Earth's mantle. Incorporating both ferric and ferrous iron in their structures, these oxides if present within the Earth could also provide insight into diamond-forming processes at depth in the planet. Here we report the discovery of metallic particles, dominantly of FeNi (Fe0.71Ni0.24Cu0.05), in close spatial relation with nearly pure magnetite grains from a so-called superdeep diamond from the Earth's mantle. The microstructural relation of magnetite within a ferropericlase (Mg0.60Fe0.40)O matrix suggests exsolution of the former. Taking into account the bulk chemistry reconstructed from the FeNi(Cu) alloy, we propose that it formed by decomposition of a complex metal M oxide (M4O5) with a stoichiometry of (Fe3+2.15Fe2+1.59Ni2+0.17Cu+0.04)Σ=3.95O5 We further suggest a possible link between this phase and variably oxidized ferropericlase that is commonly trapped in superdeep diamond. The observation of FeNi(Cu) metal in relation to magnetite exsolved from ferropericlase is interpreted as arising from a multistage process that starts from diamond encapsulation of ferropericlase followed by decompression and cooling under oxidized conditions, leading to the formation of complex oxides such as Fe4O5 that subsequently decompose at shallower P-T conditions.

Producing highly complicated materials. Nature does it better.

Through the years, mineralogical studies have produced a tremendous amount of data on the atomic arrangement and mineral properties. Quite often, structural analysis has led to elucidate the role played by minor components, giving interesting insights into the physico-chemical conditions of mineral crystallization and allowing the description of unpredictable structures that represented a body of knowledge critical for assessing their technological potentialities. Using such a rich database, containing many basic acquisitions, further steps became appropriate and possible, into the directions of more advanced knowledge frontiers. Some of these frontiers assume the name of modularity, complexity, aperiodicity, and matter organization at not conventional levels, and will be discussed in this review.

First synthesis of a unique icosahedral phase from the Khatyrka meteorite by shock-recovery experiment.

Icosahedral quasicrystals (i-phases) in the Al-Cu-Fe system are of great interest because of their perfect quasicrystalline structure and natural occurrences in the Khatyrka meteorite. The natural quasicrystal of composition Al62Cu31Fe7, referred to as i-phase II, is unique because it deviates significantly from the stability field of i-phase and has not been synthesized in a laboratory setting to date. Synthetic i-phases formed in shock-recovery experiments present a novel strategy for exploring the stability of new quasicrystal compositions and prove the impact origin of natural quasicrystals. In this study, an Al-Cu-W graded density impactor (GDI, originally manufactured as a ramp-generating impactor but here used as a target) disk was shocked to sample a full range of Al/Cu starting ratios in an Fe-bearing 304 stainless-steel target chamber. In a strongly deformed region of the recovered sample, reactions between the GDI and the steel produced an assemblage of co-existing Al61.5Cu30.3Fe6.8Cr1.4 i-phase II + stolperite (ß, AlCu) + khatyrkite (θ, Al2Cu), an exact match to the natural i-phase II assemblage in the meteorite. In a second experiment, the continuous interface between the GDI and steel formed another more Fe-rich quinary i-phase (Al68.6Fe14.5Cu11.2Cr4Ni1.8), together with stolperite and hollisterite (λ, Al13Fe4), which is the expected assemblage at phase equilibrium. This study is the first laboratory reproduction of i-phase II with its natural assemblage. It suggests that the field of thermodynamically stable icosahedrite (Al63Cu24Fe13) could separate into two disconnected fields under shock pressure above 20 GPa, leading to the co-existence of Fe-rich and Fe-poor i-phases like the case in Khatyrka. In light of this, shock-recovery experiments do indeed offer an efficient method of constraining the impact conditions recorded by quasicrystal-bearing meteorite, and exploring formation conditions and mechanisms leading to quasicrystals.

Extraordinary structural complexity of ilmajokite: a multilevel hierarchical framework structure of natural origin.

The crystal structure of ilmajokite, a rare Na-K-Ba-Ce-titanosilicate from the Khibiny mountains, Kola peninsula, Russia, has been solved using single-crystal X-ray diffraction data. The crystal structure is based on a 3D titanosilicate framework consisting of trigonal prismatic titanosilicate (TPTS) clusters centered by Ce3+ in [9]-coordination. Four adjacent TPTS clusters are linked into four-membered rings within the (010) plane and connected via ribbons parallel to 101. The ribbons are organized into layers parallel to (010) and modulated along the a axis with a modulation wavelength of csinß = 32.91 Šand an amplitude of ∼b/2 = 13.89 Å. The layers are linked by additional silicate tetrahedra. Na+, K+, Ba2+ and H2O groups occur in the framework cavities and have different occupancies and coordination environments. The crystal structure of ilmajokite can be separated into eight hierarchical levels: atoms, coordination polyhedra, TPTS clusters, rings, ribbons, layers, the framework and the whole structure. The information-based analysis allows estimation of the complexity of the structure as 8.468 bits per atom and 11990.129 bits per cell. According to this analysis, ilmajokite is the third-most complex mineral known to date after ewingite and morrisonite, and is the most complex mineral framework structure, comparable in complexity to paulingite-(Ca) (11 590.532 bits per cell).

Evidence for the charge disproportionation of iron in extraterrestrial bridgmanite.

Bridgmanite, MgSiO3 with perovskite structure, is considered the most abundant mineral on Earth. On the lower mantle, it contains Fe and Al that strongly influence its behavior. Experimentalists have debated whether iron may exist in a mixed valence state, coexistence of Fe2+ and Fe3+ in bridgmanite, through charge disproportionation. Here, we report the discovery of Fe-rich aluminous bridgmanite coexisting with metallic iron in a shock vein of the Suizhou meteorite. This is the first direct evidence in nature of the Fe disproportionation reaction, which so far has only been observed in some high-pressure experiments. Furthermore, our discovery supports the idea that the disproportionation reaction would have played a key role in redox processes and the evolution of Earth.

Daliranite, PbHgAs2S5: determination of the incommensurately modulated structure and revision of the chemical formula.

The incommensurately modulated crystal structure of the mineral daliranite has been determined using 3D electron diffraction data obtained on nanocrystalline domains. Daliranite is orthorhombic with a = 21, b = 4.3, c = 9.5 Šand shows modulation satellites along c. The solution of the average structure in the Pnma space group together with energy-dispersive X-ray spectroscopy data obtained on the same domains indicate a chemical formula of PbHgAs2S5, which has one S fewer than previously reported. The crystal structure of daliranite is built from columns of face-sharing PbS8 bicapped trigonal prisms laterally connected by [2+4]Hg polyhedra and (As3+2S5)4- groups. The excellent quality of the electron diffraction data allows a structural model to be built for the modulated structure in superspace, which shows that the modulation is due to an alternated occupancy of a split As site.

Previously unknown quasicrystal periodic approximant found in space.

We report the discovery of Al34Ni9Fe2, the first natural known periodic crystalline approximant to decagonite (Al71Ni24Fe5), a natural quasicrystal composed of a periodic stack of planes with quasiperiodic atomic order and ten-fold symmetry. The new mineral has been approved by the International Mineralogical Association (IMA 2018-038) and officially named proxidecagonite, which derives from its identity to periodic approximant of decagonite. Both decagonite and proxidecagonite were found in fragments from the Khatyrka meteorite. Proxidecagonite is the first natural quasicrystal approximant to be found in the Al-Ni-Fe system. Within this system, the decagonal quasicrystal phase has been reported to transform at ~940 °C to Al13(Fe,Ni)4, Al3(Fe,Ni)2 and the liquid phase, and between 800 and 850 °C to Al13(Fe,Ni)4, Al3(Fe,Ni) and Al3(Fe,Ni)2. The fact that proxidecagonite has not been observed in the laboratory before and formed in a meteorite exposed to high pressures and temperatures during impact-induced shocks suggests that it might be a thermodynamically stable compound at high pressure. The most prominent structural motifs are pseudo-pentagonal symmetry subunits, such as pentagonal bipyramids, that share edges and corners with trigonal bipyramids and which maximize shortest Ni-Al over Ni-Ni contacts.

Synthesis of inverse ringwoodite sheds light on the subduction history of Tibetan ophiolites.

Tibetan ophiolites are shallow mantle material and crustal slabs that were subducted as deep as the mantle transition zone, a conclusion supported by the discovery of high-pressure phases like inverse ringwoodite in these sequences. Ringwoodite, Mg2SiO4, exhibits the normal spinel structure, with Mg in the octahedral A site and Si in the tetrahedral B site. Through A and B site-disorder, the inverse spinel has four-coordinated A cations and the six-coordinated site hosts a mixture of A and B cations. This process affects the density and impedance contrasts across the boundaries in the transition zone and seismic-wave velocities in this portion of the Earth. We report the first synthesis at high pressure (20 GPa) and high temperature (1600 °C) of a Cr-bearing ringwoodite with a completely inverse-spinel structure. Chemical, structural, and computational analysis confirm the stability of inverse ringwoodite and add further constraints to the subduction history of the Luobusa peridotite of the Tibetan ophiolites.

Shock Synthesis of Five-component Icosahedral Quasicrystals.

Five-component icosahedral quasicrystals with compositions in the range Al68-73Fe11-16Cu10-12Cr1-4Ni1-2 were recently recovered after shocking metallic CuAl5 and (Mg0.75Fe0.25)2SiO4 olivine in a stainless steel 304 chamber, intended to replicate a natural shock that affected the Khatyrka meteorite. The iron in those quasicrystals might have originated either from reduction of Fe2+ in olivine or from the stainless steel chamber. In this study, we clarify the shock synthesis mechanism of icosahedral quasicrystals through two new shock recovery experiments. When CuAl5 and Fe2+-bearing olivine were isolated in a Ta capsule, no quasicrystals were found. However, with only metallic starting materials, numerous micron-sized five-component icosahedral quasicrystals, average composition Al72Cu12Fe12Cr3Ni1, were found at the interface between CuAl5 and stainless steel, demonstrating nucleation of quasicrystals under shock without any redox reaction. We present detailed characterization of recovered quasicrystals and discuss possible mechanisms for generating sufficiently high temperatures to reach melting with relatively weak shocks. We discuss the implications of our five-component quasicrystal for the stability of quasicrystals, which have previously only been considered in alloy systems with four or fewer components. Even small amounts of additional metals expand the stability range of the icosahedral phase and facilitate routine syntheses without extraordinary precision in preparation of starting mixtures.

Could incommensurability in sulfosalts be more common than thought? The case of meneghinite, CuPb13Sb7S24.

The structure of meneghinite (CuPb13Sb7S24), from the Bottino mine in the Apuan Alps (Italy), has been solved and refined as an incommensurate structure in four-dimensional superspace. The structure is orthorhombic, superspace group Pnma(0ß0)00s, cell parameters a = 24.0549 (3), b = 4.1291 (6), c = 11.3361 (16) Å, modulation vector q = 0.5433 (4)b*. The structure was refined from 6604 reflections to a final R = 0.0479. The model includes modulation of both atomic positions and displacement parameters, as well as occupational waves. The driving forces stabilizing the modulated structure of meneghinite are linked to the occupation modulation of Cu and some of the Pb atoms. As a consequence of the Cu/[] and Pb/Sb modulations, three- to sevenfold coordinations of the M cations (Pb/Sb) occur in different parts of the structure. The almost bimodal distribution of the occupation of Cu/[] and Pb/Sb at M5 conforms with the coupled substitution Sb3+ + [] → Pb2+ + Cu+, thus corroborating the hypothesis deduced previously for the incorporation of copper in the meneghinite structure. The very small departure (∼0.54 versus 0.50) from the commensurate value of the modulation raises the question of whether other sulfosalts considered superstructures have been properly described, and, in this light, if incommensurate modulation in sulfosalts could be much more common than thought.

Evidence of cross-cutting and redox reaction in Khatyrka meteorite reveals metallic-Al minerals formed in outer space.

We report on a fragment of the quasicrystal-bearing CV3 carbonaceous chondrite Khatyrka recovered from fine-grained, clay-rich sediments in the Koryak Mountains, Chukotka (Russia). We show higher melting-point silicate glass cross-cutting lower melting-point Al-Cu-Fe alloys, as well as unambiguous evidence of a reduction-oxidation reaction history between Al-Cu-Fe alloys and silicate melt. The redox reactions involve reduction of FeO and SiO2 to Fe and Fe-Si metal, and oxidation of metallic Al to Al2O3, occurring where silicate melt was in contact with Al-Cu-Fe alloys. In the reaction zone, there are metallic Fe and Fe-Si beads, aluminous spinel rinds on the Al-Cu-Fe alloys, and Al2O3 enrichment in the silicate melt surrounding the alloys. From this and other evidence, we demonstrate that Khatyrka must have experienced at least two distinct events: first, an event as early as 4.564 Ga in which the first Al-Cu-Fe alloys formed; and, second, a more recent impact-induced shock in space that led to transformations of and reactions between the alloys and the meteorite matrix. The new evidence firmly establishes that the Al-Cu-Fe alloys (including quasicrystals) formed in outer space in a complex, multi-stage process.

Discovery of the Fe-analogue of akimotoite in the shocked Suizhou L6 chondrite.

We report the first natural occurrence of the Fe-analogue of akimotoite, ilmenite-structured MgSiO3, a missing phase among the predicted high-pressure polymorphs of Fe-pyroxene, with the composition (Fe2+0.48Mg0.37Ca0.04Na0.04Mn2+0.03Al0.03Cr3+0.01)Σ=1.00Si1.00O3. The new mineral was approved by the International Mineralogical Association (IMA 2016-085) and named hemleyite in honour of Russell J. Hemley. It was discovered in an unmelted portion of the heavily shocked L6 Suizhou chondrite closely associated to olivine, clinoenstatite and Fe-bearing pyroxene with a composition nearly identical to that of hemleyite. We also report the first single-crystal X-ray diffraction study of a Si-bearing, ilmenite-structured phase. The fact that hemleyite formed in a meteorite exposed to high pressures (<20 GPa) and temperatures (<2000 °C) during impact-induced shocks indicates that it could play a crucial role at the bottom of the Earth's mantle transition zone and within the uppermost lower mantle.