Rapid Robot-Aided On-site Testing of Fume Cupboards.

Although containment testing of fume cupboards (FC) according to the standards EN 14175-3 (2019) or ANSI/ASHRAE 110 (2016) is well established for type testing, its application is currently much less accepted and practised for evaluating containment on-site. Few of the several million FC in the market have been tested at installation and commissioning, and even less undergo verification of containment during their service life in the laboratories. Several reasons have led to this unsafe situation. To address this challenge, a new concept has been developed to allow for rapid on-site testing of FC to gain knowledge as to the functional efficiency as well as to safety aspects for the operator. The concept consists of a movable robot-aided test equipment that can be installed quickly to the FC in running labs. Multiple sensors detect the tracer gas isopropanol. Within a test run of only 10-min data is collected to quantify containment at the sash opening and to determine purge efficiency. The method reveals impact from interfering effects such as draughts, air distribution, and movements and from equipment installed, and is a tool for the optimization of operating conditions of a lab. This article presents an advanced alternative to the existing containment tests, particularly for on-site testing. The method assesses not only proper operation of the FC in its environment, but also the suitability of a FC for a given use under aspects of health and safety evaluation.

Fast focus-shifter based on a unimorph deformable mirror.

On-the-fly remote laser processing plays an increasingly important role in modern fabrication techniques. These processes require guiding of the focus of a laser beam along the contours of the workpiece in three dimensions. State-of-the-art galvanometer scanners already provide highly dynamic and precise transverse x-y beam steering. However, longitudinal focus shifting ("z-shifting") relying on conventional optics is restricted to a bandwidth of a few hundred Hz. We have developed and manufactured a fast piezo-based z-shifting mirror with diffraction-limited surface fidelity providing a focus shift of Δz>60mm with an actuation rate of 2 kHz.

Developments in the MPI-M Earth System Model version 1.2 (MPI-ESM1.2) and Its Response to Increasing CO2.

A new release of the Max Planck Institute for Meteorology Earth System Model version 1.2 (MPI-ESM1.2) is presented. The development focused on correcting errors in and improving the physical processes representation, as well as improving the computational performance, versatility, and overall user friendliness. In addition to new radiation and aerosol parameterizations of the atmosphere, several relatively large, but partly compensating, coding errors in the model's cloud, convection, and turbulence parameterizations were corrected. The representation of land processes was refined by introducing a multilayer soil hydrology scheme, extending the land biogeochemistry to include the nitrogen cycle, replacing the soil and litter decomposition model and improving the representation of wildfires. The ocean biogeochemistry now represents cyanobacteria prognostically in order to capture the response of nitrogen fixation to changing climate conditions and further includes improved detritus settling and numerous other refinements. As something new, in addition to limiting drift and minimizing certain biases, the instrumental record warming was explicitly taken into account during the tuning process. To this end, a very high climate sensitivity of around 7 K caused by low-level clouds in the tropics as found in an intermediate model version was addressed, as it was not deemed possible to match observed warming otherwise. As a result, the model has a climate sensitivity to a doubling of CO2 over preindustrial conditions of 2.77 K, maintaining the previously identified highly nonlinear global mean response to increasing CO2 forcing, which nonetheless can be represented by a simple two-layer model.