RESUMO
BACKGROUND: Exercise-induced pulmonary haemorrhage (EIPH) in athletic horses is characterized by the presence of blood from the lungs in the tracheobronchial tree after intense exercise. Despite the high prevalence of EIPH in horses, the primary aetiology remains unknown. Variants in the genes encoding CD39 and CD39L1 (ENTPD1 and ENTPD2, respectively) were previously reported as potential genetic causes involved in EIPH pathogenesis. However, the role of these variants in haemostatic functions is unknown. RESULTS: To investigate the association between EIPH and missense variants in the ENTPD1 (rs1152296272, rs68621348, and rs68621347) and ENTPD2 genes (rs782872967), 76 Thoroughbred horses diagnosed with EIPH and 56 without clinical signs of EIPH (control group) by trachea-bronchial endoscopy were genotyped. The rs1152296272 and rs68621347 variants were linked, which explained why the same results were found in all horses. Approximately 96% and 95% of the EIPH and control horses, respectively, carried at least one nonreference allele for these variants. In contrast, 100% of the control horses and 96% of the EIPH horses were homozygous for the reference allele for the rs68621348 variant. In the EIPH group, 1.5% of the horses were homozygotes and 24% were heterozygous for the nonreference allele of the rs782872967 variant. In the control group, the nonreference allele of this variant was observed only in heterozygotes (16%). There were no significant differences between groups for any of the variants. CONCLUSIONS: The variants previously described in the genes encoding the CD39 and CD39L1 enzymes were highly present in the studied population. However, no association was found between the occurrence of EIPH and the presence of these variants in Thoroughbred horses in this study.
Assuntos
Hemorragia , Doenças dos Cavalos , Pneumopatias , Condicionamento Físico Animal , Animais , Cavalos , Doenças dos Cavalos/genética , Hemorragia/veterinária , Hemorragia/genética , Pneumopatias/veterinária , Pneumopatias/genética , Masculino , Apirase/genética , Feminino , Predisposição Genética para Doença , Genótipo , Mutação de Sentido IncorretoRESUMO
Brain abscesses in ruminants often arise from primary infection foci, leading to an unfavorable prognosis for affected animals. This highlights the need for comprehensive studies on brain abscesses across different ruminant species. We retrospectively investigated medical records of epidemiological, clinical, neuroimaging, anatomopathological, and bacteriological findings in six ruminants (three goats, two cows, and one sheep) diagnosed with brain abscesses. All animals studied were female. Apathy (50%), compulsive walking (33%), decreased facial sensitivity (33%), head pressing (33%), seizures (33%), semicomatous mental status (33%), strabismus (33%), unilateral blindness (33%), and circling (33%) represented the most common neurologic signs. Leukocytosis and neutrophilia were the main findings in the hematological evaluation. Cerebrospinal fluid (CSF) analysis revealed predominant hyperproteinorrachia and pleocytosis. In three cases, computed tomography or magnetic resonance imaging were used, enabling the identification of typical abscess lesions, which were subsequently confirmed during postmortem examination. Microbiological culture of the abscess samples and/or CSF revealed bacterial coinfections in most cases. Advanced imaging examinations, combined with CSF analysis, can aid in diagnosis, although confirmation typically relies on postmortem evaluation and isolation of the causative agent. This study contributes to clinicopathological aspects, neuroimages, and bacteriological diagnosis of brain abscesses in domestic ruminants.
RESUMO
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanofibers embedded with borate glasses of 45B5 composition doped with Co2+, Cu2+, and Zn2 +(46.1 B2O326.9-X CaO24.4 Na2O2.6 P2O5, X CoO/CuO/ZnO mol % (X = 0-5)) were produced by electrospinning for wound healing applications. Prior to their addition, the glasses exhibited two broad halos typical of a vitreous borate network, which were mainly composed of ring-type metaborate structural units. The particle distribution in the PHBV nanofibers embedded with 45B5 borate bioactive glasses is present in isolated and agglomerated states, being partially coated by a polymeric layer-except for the cobalt-doped glass, which resulted in a successful encapsulation with 100% embedding efficiency. The incorporation of the glasses reduced the PHBV crystallinity degree and its decomposition temperature, as well as its mechanical properties, including Young's modulus, tensile strength, and elongation at break. The neat PHBV fibers and those containing the cobalt-doped glasses demonstrated great cytocompatibility with human keratinocytes (HaCat), as suggested by the high cell viability after 7 days of exposure. Further studies are needed to fully understand the wound healing potential of these fibers, but our results significantly contribute to the area.
Assuntos
Bandagens , Boratos , Cobalto , Cobre , Poliésteres , Zinco , Humanos , Cobre/química , Cobalto/química , Poliésteres/química , Boratos/química , Zinco/química , Vidro/química , Teste de Materiais , Cicatrização , Nanofibras/química , Linhagem Celular , Poli-HidroxibutiratosRESUMO
OBJECTIVE: This study aimed to evaluate the fecal shedding of C. difficile in calves on farms in Sao Paulo State, Brazil. MATERIALS AND METHODS: Fecal samples (n = 300) were collected from diarrheic (n = 78) and nondiarrheic (n = 222) calves less than 60 days of age from 20 farms. Fecal samples were inoculated into enrichment broth supplemented with taurocholate and cultured under anaerobic conditions. Colonies suspected to be C. difficile were harvested for DNA extraction and then multiplex PCR for the detection of genes encoding toxins A and B and binary toxins. All toxigenic isolates were ribotyped and tested for antimicrobial susceptibility, and five selected strains were subjected to whole-genome sequencing to determine their sequence type. RESULTS AND DISCUSSION: C. difficile was isolated from 29.3 % (88/300) of the samples. All toxigenic isolates (17/88, 19.3 %) were classified as ribotypes RT046 (13/17-79.47 %, A+B+ CDT-) and RT126 (4/17 = 20.53 %, A+B+ CDT+). The sequenced strains from RT046 were classified as ST35 (Clade 1), while those from RT126 were classified as ST11 (Clade 5). No associations between the epidemiological factors in any of the groups and C. difficile isolation were observed. Most of the toxigenic isolates (16/17 = 94.41 %) were classified as multidrug-resistant. Calves can be an important source of toxigenic C. difficile strains, including multidrug-resistant isolates from ribotypes commonly observed in humans.
Assuntos
Doenças dos Bovinos , Clostridioides difficile , Infecções por Clostridium , Fezes , Ribotipagem , Clostridioides difficile/genética , Clostridioides difficile/isolamento & purificação , Clostridioides difficile/classificação , Clostridioides difficile/efeitos dos fármacos , Animais , Bovinos , Brasil/epidemiologia , Fezes/microbiologia , Doenças dos Bovinos/microbiologia , Doenças dos Bovinos/epidemiologia , Infecções por Clostridium/veterinária , Infecções por Clostridium/microbiologia , Infecções por Clostridium/epidemiologia , Antibacterianos/farmacologia , Testes de Sensibilidade Microbiana , Derrame de Bactérias , Diarreia/microbiologia , Diarreia/veterinária , Diarreia/epidemiologia , Toxinas Bacterianas/genética , Sequenciamento Completo do GenomaRESUMO
This study aimed to develop gelatin methacryloyl (GelMA)-injectable hydrogels incorporated with 58S bioactive glass/BG-doped with strontium for vital pulp therapy applications. GelMA hydrogels containing 0% (control), 5%, 10%, and 20% BG (w/v) were prepared. Their morphological and chemical properties were evaluated by scanning electron microscopy/SEM, energy dispersive spectroscopy/EDS, and Fourier transform infrared spectroscopy/FTIR (n = 3). Their swelling capacity and degradation ratio were also measured (n = 4). Cell viability (n = 8), mineralized matrix formation, cell adhesion, and spreading (n = 6) on DPSCs were evaluated. Data were analyzed using ANOVA/post hoc tests (α = 5%). SEM and EDS characterization confirmed the incorporation of BG particles into the hydrogel matrix, showing GelMA's (C, O) and BG's (Si, Cl, Na, Sr) chemical elements. FTIR revealed the main chemical groups of GelMA and BG, as ~1000 cm-1 corresponds to Si-O and ~1440 cm-1 to C-H. All the formulations were degraded by day 12, with a lower degradation ratio observed for GelMA+BG20%. Increasing the concentration of BG resulted in a lower mass swelling ratio. Biologically, all the groups were compatible with cells (p > 0.6196), and cell adhesion increased over time, irrespective of BG concentration, indicating great biocompatibility. GelMA+BG5% demonstrated a higher deposition of mineral nodules over 21 days (p < 0.0001), evidencing the osteogenic potential of hydrogels. GelMA hydrogels incorporated with BG present great cytocompatibility, support cell adhesion, and have a clinically relevant degradation profile and suitable mineralization potential, supporting their therapeutic potential as promising biomaterials for pulp capping.
RESUMO
The field of tissue engineering has witnessed significant advancements in recent years, driven by the pursuit of innovative solutions to address the challenges of bone regeneration. In this study, we developed an electrospun composite scaffold for bone tissue engineering. The composite scaffold is made of a blend of poly(L-lactide-co-ε-caprolactone) (PLCL) and polyethylene glycol (PEG), with the incorporation of calcined and lyophilized silicate-chlorinated bioactive glass (BG) particles. Our investigation involved a comprehensive characterization of the scaffold's physical, chemical, and mechanical properties, alongside an evaluation of its biological efficacy employing alveolar bone-derived mesenchymal stem cells. The incorporation of PEG and BG resulted in elevated swelling ratios, consequently enhancing hydrophilicity. Thermal gravimetric analysis confirmed the efficient incorporation of BG, with the scaffolds demonstrating thermal stability up to 250°C. Mechanical testing revealed enhanced tensile strength and Young's modulus in the presence of BG; however, the elongation at break decreased. Cell viability assays demonstrated improved cytocompatibility, especially in the PLCL/PEG+BG group. Alizarin red staining indicated enhanced osteoinductive potential, and fluorescence analysis confirmed increased cell adhesion in the PLCL/PEG+BG group. Our findings suggest that the PLCL/PEG/BG composite scaffold holds promise as an advanced biomaterial for bone tissue engineering.
Assuntos
Células-Tronco Mesenquimais , Poliésteres , Polietilenoglicóis , Engenharia Tecidual , Alicerces Teciduais , Polietilenoglicóis/química , Poliésteres/química , Alicerces Teciduais/química , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Humanos , Vidro/química , Teste de MateriaisRESUMO
Candida albicans can cause various types of oral infections, mainly associated with denture stomatitis. Conventional therapy has been linked to high recurrence, toxicity, and fungal resistance, necessitating the search for new drugs and delivery systems. In this study, caffeic acid phenethyl ester (CAPE) and gellan gum (GG) were studied as an antifungal agent and carrier system, respectively. First, we observed that different GG formulations (0.6 to 1.0% wt/vol) were able to incorporate and release CAPE, reaching a controlled and prolonged release over 180 min at 1.0% of GG. CAPE-GG formulations exhibited antifungal activity at CAPE concentrations ranging from 128 to >512 µg/mL. Furthermore, CAPE-GG formulations significantly decreased the fungal viability of C. albicans biofilms at short times (12 h), mainly at 1.0% of GG (p < 0.001). C. albicans protease activity was also reduced after 12 h of treatment with CAPE-GG formulations (p < 0.001). Importantly, CAPE was not cytotoxic to human keratinocytes, and CAPE-GG formulations at 1.0% decreased the fungal burden (p = 0.0087) and suppressed inflammation in a rat model of denture stomatitis. Altogether, these results indicate that GG is a promising delivery system for CAPE, showing effective activity against C. albicans and potential to be used in the treatment of denture stomatitis.
RESUMO
OBJECTIVES: This study investigated the impact of the remaining coronal tooth structure on the mechanical behavior of nonpost (NP) full crowns on endodontically treated maxillary central incisors. MATERIALS AND METHODS: Forty bovine incisors with NP and 2-mm of ferrule were divided into four groups based on the remaining structure: complete 2-mm ferrule (NP-2), absence of mesial and distal ferrule effect (NP-BL), absence of buccal and lingual ferrule effect (NP-MD), and no ferrule (NP-0). The specimens underwent a stepwise stress fatigue test until fracture occurred, and stress distribution was analyzed using in silico finite element analysis (FEA). Additionally, groups with endodontic posts (P) were simulated in the FEA. RESULTS: The results showed that the survival rates varied among the different groups under oblique loading. The NP-2 group exhibited the highest survival rate, with all samples enduring loads up to 200 N and some surviving up to 520 N. The NP-MD and NP-BL groups had lower survival rates, while the NP-0 group had the poorest survival rate. The predominant failure mode was a nonrepairable root fracture. FEA results indicated no significant difference between groups with and without posts. NP intraradicular restorations on nonweakened roots with a minimum height of 2mm and partial or total ferrule thickness of 1mm offer a promising treatment option. CONCLUSION: A complete 2-mm ferrule was found to be the most favorable configuration for NP full crowns. However, maintaining the remaining tissue is crucial, as both combinations with preserved ferrule effect exhibited superior behavior in terms of fatigue and fracture load compared to the group with no ferrule. These findings contribute to understanding the mechanical considerations for NP full crowns and provide insights into treatment planning and design choices in restorative dentistry.
RESUMO
BACKGROUND/AIMS: The study aimed to assess the surface characteristics of sports mouthguards under mechanical stresses during cleaning, either by brushing or immersion in disinfectant solutions. MATERIAL AND METHODS: Ethylene-vinyl acetate samples, 4 mm thick, were randomly assigned to cleaning methods: control (C-no cleaning), brushing with water (B.W), brushing with neutral liquid soap (B.S), brushing with toothpaste (B.T), immersion in distilled water for 10 min (I.W), immersion in 2.25% sodium hypochlorite solution for 10 min (I.SH), and immersion in sodium bicarbonate solution for 5 min (I.SB). All cleaning methods were applied for 28 days. Surface roughness average (Ra) and wettability were measured at baseline for the control group (n = 9), and after cleaning for all the other groups. RESULTS: One-way ANOVA with Tukey tests (5% significance) indicated significant differences among groups (p < .05). The I.SB group had higher surface roughness than B.S and B.T (p < .05). B.W showed the lowest wettability, significantly lower than B.T, I.W, and I.SB (p < .05). I.SB exhibited the highest wettability, significantly different from sodium hypochlorite, neutral liquid soap, brushing with water, and control groups (p < .05). The sodium bicarbonate immersion group (I.SB) demonstrated greater statistical variation, displaying higher susceptibility to aging compared to brushing with neutral liquid soap. CONCLUSION: Cleaning mouthguards with a toothbrush, water, and neutral liquid soap emerged as the most promising method, causing minimal surface changes in the material.
Assuntos
Protetores Bucais , Propriedades de Superfície , Escovação Dentária , Desinfetantes , Hipoclorito de Sódio/farmacologia , Humanos , Bicarbonato de Sódio , Sabões , Cremes Dentais , Molhabilidade , Fatores de Tempo , PolivinilRESUMO
Staphylococci are well-known opportunistic pathogens associated with suppurative diseases in humans and animals. Antimicrobial resistance is an emergent threat to humans and animals worldwide. This study investigated the prevalence of methicillin-resistant Staphylococcus spp. (MRS) in hospitalized horses and contacting personnel (veterinarians and staff), and assessed possible interspecies transmission in a teaching veterinary hospital. Nasal swabs from horses (n = 131) and humans (n = 35) were collected. The microorganisms were identified by traditional biochemical tests and genotypic methods, i.e., PCR, internal transcript spacer PCR (ITS-PCR), and gene sequencing. Staphylococcal species were isolated in 18% (23/131) of the horses, of which 8% (11/131) were S. hyicus, 4 % (5/131) were S. aureus, 4% (5/131) were S. pseudintermedius, and 2% (2/131) were S. schleiferi subsp. coagulans. The mecA gene was detected in an S. pseudintermedius isolate. Staphylococcus spp. was isolated in 40% (14/35) of the human samples, all of which were S. aureus. In four samples of S. aureus, the clonal profile ST398 was identified; among them, a clonal similarity of 98.1% was observed between a horse and a contacting human. This finding supports the need for biosecurity measures to avoid the spread of multidrug-resistant staphylococci in humans and horses.
Assuntos
Doenças dos Cavalos , Staphylococcus aureus Resistente à Meticilina , Infecções Estafilocócicas , Cavalos , Animais , Humanos , Staphylococcus aureus Resistente à Meticilina/genética , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Staphylococcus aureus , Infecções Estafilocócicas/epidemiologia , Infecções Estafilocócicas/veterinária , Resistência a Meticilina , Hospitais Veterinários , Staphylococcus/genética , Doenças dos Cavalos/epidemiologiaRESUMO
The development of bioactive membranes with bone repair properties is great interest in the field of tissue engineering. In this study, we aimed to fabricate and characterize a composite membrane composed of sol-gel synthesized bioceramics and electrospun polycaprolactone (PCL) fibers for bone tissue regeneration applications. The bioceramics were prepared using the sol-gel method with nitrate (N) and chloride (CL) as precursors. PCL and bioceramic solutions were electrospun to obtain ultrafine fiber mats. Raman spectroscopy, x-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were used to characterize the materials. The results showed that both chlorinated and non-chlorinated bioceramics contained NBOs (non-bridge bonds) and crystallized the α-wollastonite phase, with the chlorinated version doing so at lower temperatures. In vitro tests were performed to evaluate cytotoxicity, cell adhesion, and mineralized matrix formation on the membranes. The composite membranes showed improved cell viability and promoted mineralization nodules formation. This study presents a promising approach for the development of bioactive membranes for bone tissue engineering, with potential applications in bone regeneration therapies.
Assuntos
Poliésteres , Engenharia Tecidual , Poliésteres/química , Engenharia Tecidual/métodos , Espectroscopia de Infravermelho com Transformada de Fourier , Osso e Ossos , Alicerces Teciduais/química , Materiais Biocompatíveis/químicaRESUMO
Objective: The aim of the study was to report the aplicability of intraoral scanning while rubber dam isolation is in place. Material and Methods: Female patient, 50 years old, required restorative procedures on teeth 35 and 37. An intraoral scan was initially performed on both arches. Isolation was carried out from 33 to 37, tooth preparation and immediate dentin sealing were carried out. A new scan with the rubber dam in place was performed and a CAD/CAM lithium disilicate hybrid block was digitally designed, milled, crystallized and cemented under the tooth surface with the rubber dam still in position. After completing this stage, the rubber dam was removed, the occlusion was verified, presenting excellent aesthetic and functional results. Results: The absolute isolation process used in the present study works as an excellent device for gingival retraction. Conclusion: The absolute isolation can be recommended in clinical activities of intraoral scanning favoring the quality of the final result of treatments (AU)
Objetivo: O objetivo do estudo foi relatar a aplicabilidade do escaneamento intraoral sob isolamento absoluto. Material e Métodos: Paciente do sexo feminino, 50 anos, necessitou de procedimentos restauradores nos dentes 35 e 37. Uma varredura intraoral foi inicialmente realizada em ambos os arcos. O isolamento absoluto foi feito de 33 a 37, permitindo a realização do preparo dentário e selamento imediato da dentina. Um novo escaneamento com o dique de borracha colocado foi realizado e um bloco híbrido de dissilicato de lítio CAD/CAM foi projetado digitalmente, fresado, cristalizado e cimentado sob a superfície dentária ainda com o dique de borracha em posição. Após a finalização dessa etapa, o dique de borracha foi removido, a oclusão foi verificada apresentando ótimos resultados estéticos e funcionais. Resultados: O isolamento absoluto utilizado no presente estudo funciona como um excelente dispositivo para retração gengival. Conclusão: O isolamento absoluto pode ser recomendado em atividades clínicas de escaneamento intraoral favorecendo a qualidade do resultado final dos tratamentos (AU)
Assuntos
Humanos , Feminino , Pessoa de Meia-Idade , Diques de Borracha , Desenho Assistido por Computador , Encaixe de Precisão de Dentadura , Tecnologia Digital , Reabilitação BucalRESUMO
In Brazil, the production of mules with a comfortable gait primarily involves the breeding of marching saddle mules. This is achieved by crossing gaited Pêga donkeys with horses from the Mangalarga Marchador and Campolina breeds. The DMRT3:g.22999655C>A SNP is implicated in regulating gait phenotypes observed in various horse breeds, including the batida (CC) and picada (CA) gaits found in these horse breeds. We aimed to determine if genotypes influenced gait type in 159 mules and 203 donkeys genotyped for the DMRT3 SNP by PCR-RFLP analysis. About 47% of mules had the CC-genotype, while 53% had the CA-genotype. Donkeys predominantly had the CC-genotype (97%), and none had AA. Both CC- and CA-genotypes were evenly distributed among mules with the batida or picada gaits. In donkeys, the CC-genotype frequencies were consistent regardless of gait type. However, the CA-genotype was more common in picada-gaited donkeys than in batida-gaited donkeys. The prevalence of CA mules and the rare presence of the non-reference allele in donkeys align with previous findings in Mangalarga Marchador and Campolina horses. This suggests that the non-reference allele likely originated from the mares involved in donkey crosses. Our results also imply that factors beyond this variant, such as other genes and polymorphisms, influence gait traits in equids.
RESUMO
OBJECTIVES: This study reports the genomic characterization of the multidrug resistant Salmonella Newport strain 195_20 recovered from the diarrheic faeces of a foal in Brazil and co-harbouring the mcr-9, blaCMY-2 and qnrB19 antibiotic resistance genes. METHODS: Bacterial isolate positive for mobile colistin resistance gene (mcr-9) was submitted to antimicrobial susceptibility testing by disk diffusion and broth microdilution for colistin and polymyxin B. The isolate was submitted to whole genome sequencing by Illumina technology and Nanopore Sequencing. Conjugation assays, plasmid sizes determined by S1-PFGE and plasmid content were investigated by hybrid assembly after MinIon long reads sequencing. RESULTS: Isolate 195_20 was identified as sequence type ST45, resistant to penicillin and cephalosporins (ampicillin, ceftazidime, ceftriaxone and cefotaxime), aminoglycosides (streptomycin and gentamicin), phenicol (chloramphenicol), quinolones and fluoroquinolones (nalidixic acid, ciprofloxacin, and pefloxacin), folate pathway antagonists (sulfonamides and trimethoprim-sulfamethoxazole), and tetracycline. A transferable IncHI2/IncHI2A plasmid sized ca. 262kb was found to carry the mcr-9 gene in a module consisting of IS903-mcr-9-wbuC-IS26. In addition, an 174kb IncC and a 48kb IncN plasmid were also identified in the 195_20 isolate, carrying blaCMY-2 and qnrB19, respectively. CONCLUSIONS: Not surprisingly, isolate 195_20 was susceptible to polymyxins, possibly due to absence of qseBC regulatory operon. Presence of mobile colistin resistance (mcr-9), third-generation cephalosporins (blaCMY-2) and quinolone (qnrB19) resistance determinants in zoonotic pathogens from animals in close contact with humans alerts for the possible route of transmission between these different reservoirs.
Assuntos
Colistina , Proteínas de Escherichia coli , Animais , Cavalos , Humanos , Escherichia coli/genética , Proteínas de Escherichia coli/genética , Antibacterianos/farmacologia , Genômica , Salmonella/genética , Fezes , CefalosporinasRESUMO
Three-related cats were evaluated for a history of short-strided gait and temporary recumbency after startle. Neurological examination, electromyography (EMG), muscle biopsies, and a chloride voltage-gated channel 1 (CLCN1) molecular study were performed. Clinically, all 3 cats presented myotonia with warm-up phenomenon and myotonic discharges during EMG examination. Muscle biopsies showed normal muscle architecture and variation in the diameter of myofiber size with the presence of numerous hypertrophic fibers. The molecular study revealed a missense variant (c.991G>C, p.Ala331Pro) in exon 9 of the CLCN1 gene, responsible for the first chloride channel extracellular loop. This mutation was screened in 104 control phenotypically normal unrelated cats, and all were wildtype. The alanine at this position is conserved in ClC-1 (chloride channel protein 1) in different species, and 2 mutations at this amino acid position are associated with human myotonia. This is the third CLCN1 mutation described in the literature associated with hereditary myotonia in cats and the first in domestic animals located in an extracellular muscle ClC-1 loop.
Assuntos
Doenças do Gato , Miotonia , Gatos , Humanos , Animais , Miotonia/veterinária , Mutação de Sentido Incorreto , Mutação , Músculo Esquelético/patologia , Canais de Cloreto/genética , Canais de Cloreto/metabolismo , Doenças do Gato/patologiaRESUMO
In vitro larvicidal assays carried out previously by our research group with cubebin, dihydrocubebin and hinokinin, lignans extracted from the fruits of Piper cubeba, against Haemonchus contortus larvae showed strong action larvicidal these compounds. Hinokinin was the most active (EC50 = 0.34 µg/mL) with strong action on the cuticle of the larvae as observed by scanning electron microscopy of the L3 stage. Therefore, to understand the mechanism of action of these compounds in silico studies were carried out using the enzyme phosphomethyltransferase of Haemonchus contortus that contain PMT-1 and PMT-2 di-domains responsible for phosphocholine synthesis, which is one of the main lipids in nematodes. This pathway is not found in mammals, so this enzyme is an important biological target for the development of new anthelmintics. Results of molecular docking, molecular dynamic and a density functional theory calculations studies with the three lignans show few interactions with PMT-1. However, hinokinin has important interactions with PMT-2, that can deactivate the enzyme and interrupt the phosphocholine synthesis, which is an essential compound for the development and maintenance of the nematode cuticle and its survive. Therefore, the previous results of the in vitro assay allied with in silico results, now realized; suggest that hinokinin may be a possible selective target for the development of new anthelmintics against Haemonchus contortus since the PMT-2 domain is present in this nematode.
Assuntos
Anti-Helmínticos , Haemonchus , Lignanas , Nematoides , Piper , Animais , Simulação de Acoplamento Molecular , Fosforilcolina/farmacologia , Lignanas/farmacologia , Anti-Helmínticos/farmacologia , Larva , MamíferosRESUMO
The clinical findings of pleural empyema in six horses were retrospectively studied using epidemiological, clinical pathology, microbiological, ultrasound, and post-mortem data. The clinical findings included tachycardia (n = 3/6), tachypnea (n = 6/6), cyanotic mucosa (n = 2/6), hyperthermia (n = 4/6), inspiratory or mixed dyspnea (n = 6/6), presence of fluid and/or pleural rubbing (n = 2/6) and coarse crackling on auscultation (n = 4/6). Horses demonstrated leukocytosis (16.22 × 103/µL) with neutrophilia (12.32 × 103/µL) and hyperfibrinogenemia (633.33 mg/dL) and an increase in urea (69.80 mg/kg) and globulins (5.22 g/dL). The pleural fluid exhibited exudate (n = 5/6). The pathogens isolated from transtracheal wash (TTW) and/or pleural effusion included Aspergillus fumigatus, Enterobacter cloacae, alpha and beta hemolytic Streptococcus, Pseudomonas aeruginosa, Salmonella sp., Streptococcus equi subsp. zooepidemicus, and beta hemolytic Staphylococcus. The in vitro tests of microbial sensitivity of the isolates revealed that ceftiofur (5/6) and penicillin (3/6) were the most effective drugs. The fatality rate was 83% (5/6). The main post-mortem finding was the presence of fibrin in the pleural cavity with adhesion between the parietal and visceral pleura. These results show that pleural empyema is a complex disease pathophysiology that is refractory to conventional treatment.
RESUMO
This study aimed to evaluate the Carbon Fiber obtained from PAN textile and cotton fiber in their different forms of presentation: non-activated carbon fiber felt (NACFF), activated carbon fiber felt (ACFF), silver activated carbon fiber felt (Ag-ACFF), and activated carbon fiber tissue (ACFT), to obtain scaffolds as a potential material with properties related to the synthetic bone graft. Characterization tests performed: surface wettability, traction, swelling, and in vivo tests: evaluation of the inflammatory response by implanting the materials in the subcutaneous tissue of 14 Wistar rats, evaluation of collagen fibers by picrosirius red staining and assessment of toxicity in the following organs: heart, spleen, liver, and kidney. In the wettability test, NACFF and ACFT were hydrophobic (θ124° and 114°), ACFF and Ag-ACFF were hydrophilic. For maximum stress, ACFF was more resistant (2.983 ± 1.059) p < .05. In the swelling test, the Ag-ACFF and ACFF groups showed the highest absorption percentage for the PBS solution and distilled water (p < .001). The organs showed no signs of acute systemic toxicity. The implant regions showed mild to moderate inflammatory infiltrate at 7 and 21 days. Only the ACFT group did not show the maturation of type I collagen fibers in 21 days. Through the conducted analyses, the ACFT shows little potential to be indicated as a possible scaffold. Therefore NACFF, ACFF, and Ag-ACFF have the potential to be considered scaffolds due to the following characteristics presented: good absorption rate, hydrophilicity, and non-toxic.
RESUMO
OBJECTIVE: To evaluate the effects of cusp inclination of the prosthetic preparation's occlusal surface and type of restorative material on the fatigue behavior, failure mode, and stress distribution of occlusal veneers. MATERIALS AND METHODS: Glass fiber-reinforced epoxy resin prosthetic preparations for occlusal veneers with three different occlusal surface cusp inclination degrees (0°, 15°, and 30°) were produced and assigned into six testing groups (n = 11) according to the cusp inclination (0°, 15°, or 30°) and type of restorative material (lithium disilicate-LD or resin composite-RC). Despite different substrate preparation cusp inclination degrees, the restorations were designed maintaining 30° inclination between the cusps at the occlusal surface and a thickness of 0.7 mm at the central groove region of the restorations to be machined in a CAD/CAM system. After cementation, the specimens were stored for about 7 days (under water at 37 °C), and subsequently submitted to a load to failure test (n = 2) and an intermittent cyclic fatigue test (n = 9) (initial load: 100 N; step size: 50 N; cycles/step: 10,000; loading frequency: 20 Hz; loading piston: 6-mm-diameter stainless steel) until observing cracks. The data were analyzed by two-way ANOVA, Kaplan-Meier, and Mantel-Cox post hoc tests. Finite element analysis (FEA) and fractographic analyses were performed. RESULTS: The fatigue performance of LD and RC occlusal veneers was evaluated based on different prosthetic preparation cusp inclinations. The 0° inclination showed the best fatigue performance for both materials (LD: 944N, RC: 861N), while the 15° and 30° inclinations had lower values (LD: 800N and 533N, RC: 739N and 717N, respectively). The study also found that for a 0° inclination, LD occlusal veneers performed better than RC ones (LD: 944 N > RC: 861N), while for a 30° inclination, RC occlusal veneers had better fatigue performance than LD ones (LD: 533N < RC: 717N). No significant difference was observed between the materials for a 15° inclination (LD: 800N = RC: 739N). The FEA results showed a higher tensile stress concentration on lithium disilicate than on resin composite occlusal veneers. All lithium disilicate occlusal veneers showed radial crack failures, while resin composite occlusal veneers showed Hertzian cone cracks and radial cracks combined. CONCLUSION: Considering mechanical perspective only, RC occlusal veneers should be indicated when prosthetic preparation cusps inclinations are 30°. When 0° prosthetic preparation cusps inclinations are observed, LD occlusal veneers will behave mechanically better. When a 15° cusp inclination is preserved, both restorative materials behave similarly.
Assuntos
Cerâmica , Porcelana Dentária , Teste de Materiais , Análise do Estresse Dentário , Resinas Compostas , Desenho Assistido por Computador , Falha de Restauração Dentária , Propriedades de SuperfícieRESUMO
Aural plaques have been linked to Equus caballus papillomavirus (EcPV). Ten types of EcPVs have already been described; however, only EcPVs 1, 3, 4, 5, and 6 have been observed in association with aural plaques. Accordingly, the objective of this study was to evaluate the presence of EcPVs in equine aural plaque samples. A total of 29 aural plaque samples (from 15 horses) were collected and assessed for the presence of the DNA of these EcPVs by PCR. Additionally, 108 aural plaque samples used in previous research were evaluated for the presence of EcPVs 8 and 9. Previously described primers were used for PCR to detect EcPVs 1 to 8, and specific primers were designed for EcPV 9. Minigenes were synthesized and used as a positive control in the PCRs for the undetected EcPVs. EcPVs 2, 7, 8, and 9 were not detected in any of the evaluated samples, suggesting that these viral types are not involved in the etiology of the equine aural plaque in Brazil. EcPV 6 was the most prevalent (81%), followed by EcPVs 3 (72%), 4 (63%) and 5 (47%), which reinforces the idea that these viruses play an important role in the etiology of the equine aural plaque in Brazil.