Parkin is a critical player in the effects of caffeine over mitochondrial quality control pathways during skeletal muscle regeneration in mice.

AIM: This study aimed to investigate the effects of caffeine on pathways associated with mitochondrial quality control and mitochondrial capacity during skeletal muscle regeneration, focusing on the role of Parkin, a key protein involved in mitophagy. METHODS: We used in vitro C2C12 myoblast during differentiation with and without caffeine in the medium, and we evaluated several markers of mitochondrial quality control pathways and myotube growth. In vivo experiments, we used C57BL/6J (WT) and Parkintm 1Shn lineage (Parkin-/- ) mice and injured tibial anterior muscle. The mice regenerated TA muscle for 3, 10, and 21 days with or without caffeine ingestion. TA muscle was used to analyze the protein content of several markers of mitochondrial quality pathways, muscle satellite cell differentiation, and protein synthesis. Furthermore, it analyzed mtDNA, mitochondrial respiration, and myofiber growth. RESULTS: C2C12 differentiation experiments showed that caffeine decreased Parkin content, potentially leading to increased DRP1 and PGC-1α content and altered mitochondrial population, thereby enhancing growth capacity. Using Parkin-/- mice, we found that caffeine intake during the regenerative process induces an increase in AMPKα phosphorylation and PGC-1α and TFAM content, changes that were partly Parkin-dependent. In addition, the absence of Parkin potentiates the ergogenic effect of caffeine by increasing mitochondrial capacity and myotube growth. Those effects are related to increased ATF4 content and activation of protein synthesis pathways, such as increased 4E-BP1 phosphorylation. CONCLUSION: These findings demonstrate that caffeine ingestion changes mitochondrial quality control during skeletal muscle regeneration, and Parkin is a central player in those mechanisms.

Composite Containing Calcium Phosphate Particles Functionalized with 10-MDP.

The phosphate ester monomer 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) is capable of bonding to hydroxyapatite and, for this reason, is a key component of several self-etch adhesives. In this study, dicalcium phosphate dihydrate particles (DCPD; CaHPO4.2H2O) were functionalized with 10-MDP and used to formulate an experimental composite with 50 vol% inorganic content (3:1 DCPD:silanated barium glass ratio) dispersed in a BisGMA/TEGDMA matrix. The tested hypothesis was that DCPD functionalization would improve the composite's mechanical performance without compromising Ca2+ release. Composites containing nonfunctionalized DCPD or only reinforcing glass (in both cases, with or without 10-MDP mixed in the resin phase) were used as controls. Materials were tested for degree of conversion (DC; by Fourier transform infrared spectroscopy), water sorption (WS) and solubility (SL; according to ISO 4049), biaxial flexural strength (BFS)/modulus (FM) after 24 h and 5 mo in water, and 28-d Ca2+ release in water (by plasma-coupled optical emission spectroscopy). Data were analyzed using analysis of variance/Tukey test (alpha: 5%). DCPD functionalization did not interfere with DC. The composite containing functionalized DCPD showed significantly lower WS and SL in comparison with the material formulated with nonfunctionalized particles. The presence of 10-MDP (as a functionalizing agent or dispersed in the resin phase) reduced the composite's initial BFS and FM. After 5 mo in water, the composite with functionalized DCPD and both glass-only composites were able to maintain their mechanical properties at levels statistically similar to what was observed after 24 h. Ca2+ release was significantly reduced in both formulations containing 10-MDP. In conclusion, DCPD functionalization with 10-MDP increased the composite's resistance to hydrolytic degradation, improving its mechanical stability after prolonged water storage. However, the impaired water transit at the particle-matrix interface led to a reduction in Ca2+ release.

Situating the parietal memory network in the context of multiple parallel distributed networks using high-resolution functional connectivity.

A principle of brain organization is that networks serving higher cognitive functions are widely distributed across the brain. One exception has been the parietal memory network (PMN), which plays a role in recognition memory but is often defined as being restricted to posteromedial association cortex. We hypothesized that high-resolution estimates of the PMN would reveal small regions that had been missed by prior approaches. High-field 7T functional magnetic resonance imaging (fMRI) data from extensively sampled participants was used to define the PMN within individuals. The PMN consistently extended beyond the core posteromedial set to include regions in the inferior parietal lobule; rostral, dorsal, medial, and ventromedial prefrontal cortex; the anterior insula; and ramus marginalis of the cingulate sulcus. The results suggest that, when fine-scale anatomy is considered, the PMN matches the expected distributed architecture of other association networks, reinforcing that parallel distributed networks are an organizing principle of association cortex.

Origin and population structure of Brazilian hair sheep breeds.

Brazilian hair sheep constitute a genetic diversity hotspot. These animals are found in the harsh environments of the Brazilian Northwest (semi-arid) region. Genotypes (50K SNP chip) from seven Brazilian sheep breeds (five hair and two coarse wool types) and 87 worldwide breeds were used to test for population structure, admixture and genetic diversity. Moreover, phylogenetic trees evaluating migration events between genetic groups were built. Brazilian Somali, a fat-tailed breed, had a close relationship with East African breeds and clustered distinctly from other Brazilian breeds. Brazilian Blackbelly and Barbados Blackbelly had a close relationship. The Morada Nova breed did not show close relationships with European or African breeds, revealing a single migration event from an Algerian hair breed. Brazilian Fat-tail and Morada Nova share a common ancestor, but the former showed introgressions from Brazilian Somali and Afrikaner breeds, explaining the fat-tail phenotype. The Santa Inês breed received a substantial contribution from Brazilian Bergamasca and showed an admixed origin with recent introgressions from other breeds, mainly from Suffolk. Furthermore, Brazilian Somali and Brazilian Fat-tail are the most endangered sheep genetic resources in Brazil and should be the focus for ex situ conservation programs. In conclusion, Brazilian hair sheep show an African origin and are characterized by diverse genetic composition, reinforcing the need for conservation of these genetic resources, and at the same time, this highly diverse group has variability that can be used in breeding programs.

Polymerization Stress and Gap Formation of Self-adhesive, Bulk-fill and Flowable Composite Resins.

CLINICAL RELEVANCE: Bulk-fill materials show a similar or better performance than control flowable materials regarding interfacial integrity. However, some self-adhesive composites need improvements to achieve competitive performance. SUMMARY: Objective: This laboratory study compared the polymerization stress and gap formation of self-adhesive, bulk-fill and control flowable composites. The degree of conversion (DC) and post-gel shrinkage were also assessed.Methods: Two self-adhesive (Vertise Flow and Fusio Liquid Dentin), two bulk-fill (Tetric N-Flow Bulk-Fill and Filtek Bulk-Fill Flowable Restorative), and two control flowable (Z350 XT Flowable Restorative and Tetric N-Flow) composites were evaluated. Polymerization stress (PS) was determined in a universal testing machine (n=5). Gap formation was evaluated by scanning electron microscopy in class I restorations (n=6). DC was measured by Fourier transform infrared spectroscopy (n=3). Post-gel volumetric shrinkage (VS) was measured using the strain gauge method (n=5). Data were submitted to one-way analysis of variance or a Kruskal-Wallis test (α=0.05).Results: Vertise Flow and Fusio Liquid Dentin presented the highest interfacial gap (27%±5% and 21%±6%, respectively), which was associated with their highest PS (4.1±0.8 MPa and 3.5±0.6 MPa, respectively) and DC (63%±2% and 60%±2%, respectively) in spite of the lowest VS (1.0%±0.2% and 1.0%±0.3%, respectively). Tetric N-Flow Bulk-Fill and Filtek Bulk-Fill Flowable Restorative presented similar PS (2.9± 0.3 MPa and 2.4±0.2 MPa, respectively) to both control materials. However, the Tetric N-Flow Bulk-Fill showed the lowest gap (7%±2%) and the highest DC (64.3%±0.4%), and the Filtek Bulk-fill presented a marginal gap (17.8%±3.4%) and a DC (54.5%±2.7%) similar to the control materials. The VS values of both bulk-fill materials were similar to those of Tetric N-Flow and lower than that of Z350 XT Flowable Restorative.Conclusions: Bulk-fill composites showed either similar or significantly lower interfacial gaps and PS than the control flowable composites. The self-adhesive composites showed a significantly higher gap percentage and PS than the control and bulk-fill materials.

Bioactive Materials Subjected to Erosion/Abrasion and Their Influence on Dental Tissues.

OBJECTIVE: The objective of this study was to evaluate the effect of erosion or erosion-abrasion on bioactive materials and adjacent enamel/dentin areas. METHODS AND MATERIALS: Enamel and dentin blocks (4×4×2 mm) were embedded side by side in acrylic resin, and a standardized cavity (1.2×4×1.5 mm) was prepared between them. Preparations were restored with the following materials: composite resin (Filtek Z350, control); experimental composite containing di-calcium phosphate dihydrate particles (DCPD); Giomer (Beautifil II), high viscosity glass ionomer cement (GIC, Fuji IX); and a resin-modified GIC (Fuji II LC). The specimens were submitted to two cycling models (n=10): erosion or erosion-abrasion. The challenges consisted of five-minute immersion in 0.3% citric acid solution, followed by 60-minute exposure to artificial saliva. Toothbrushing was carried out twice daily, 30 minutes after the first and last exposures to acid. Dental and material surface loss (SL, in µm) were determined by optical profilometry. Data were analyzed with Kruskal-Wallis and Dunn tests (α=0.05). RESULTS: Under erosion, for enamel, only the GIC groups presented lower SL values than Z350 (p<0.001 for Fuji IX and p=0.018 for Fuji II LC). For dentin, none of the materials showed significantly lower SL values than Z350 (p>0.05). For material, the GICs had significantly higher SL values than those of Z350 (p<0.001 for Fuji IX and p=0.002 for Fuji II LC). Under erosion-abrasion, the enamel SL value was significantly lower around Fuji II LC compared with the other materials (p<0.05). No significant differences were observed among groups for dentin SL (p=0.063). The GICs and Giomer showed higher SL values than Z350 (p<0.001 for the GICs and p=0.041 for Giomer). CONCLUSION: Both GIC-based materials were susceptible to erosive wear; however, they promoted the lowest erosive loss of adjacent enamel. Against erosion-abrasion, only Fuji II LC was able to reduce enamel loss. For dentin, none of the materials exhibited a significant protective effect.

Effect of Curing Light and Exposure Time on the Polymerization of Bulk-Fill Resin-Based Composites in Molar Teeth.

OBJECTIVES: This study examined the influence of different light-curing units (LCUs) and exposure times on the microhardness across bulk-fill resin-based composite (RBC) restorations in a molar tooth. METHODS AND MATERIALS: Tip diameter, radiant power, radiant exitance, emission spectra, and light beam profile were measured on two single-emission-peak LCUs (Celalux 3 and DeepCure-S) and two multiple-peak LCUs (Bluephase 20i and Valo Grand). A mold was made using a human molar that had a 12-mm mesial-distal length, a 2.5-mm deep occlusal box, and two 4.5-mm deep proximal boxes. Two bulk-fill RBCs (Filtek Bulk Fill Posterior and Tetric EvoCeram Bulk Fill) were photoactivated for 10 seconds and for 20 seconds, with the light guide positioned at the center of the occlusal surface. Microhardness was then measured across the transverse surface of the restorations. The light that reached the bottom of the proximal boxes was examined. Data were statistically analyzed with the Student t-test, two-way analysis of variance, and the Tukey post hoc test (α=0.05). RESULTS: The four LCUs were different regarding all the tested characteristics. Even when using LCUs with wide tips and a homogeneous beam profile, there were significant differences in the microhardness results obtained at the central and proximal regions of the RBCs (p<0.05). LCUs with wider tips used for 20 seconds produced higher microhardness values (p<0.05). The multiple-peak LCUs produced greater hardness values in Tetric EvoCeram Bulk Fill than did the single-emission-peak LCUs (Celalux 3 and DeepCure-S). Results for the light measured at the bottom of proximal boxes showed that little light reached these regions when the light tip was positioned at the center of restorations. CONCLUSIONS: Curing lights with wide tips, homogeneous light beam profiles, and longer exposure times are preferred when light-curing large MOD restorations. Light curing from more than one position may be required for adequate photopolymerization.

How epidemiological patterns shift across populations in an exotic lizard.

Several factors influence the dynamics and structure of parasite communities. Our goal was to investigate how the community composition, prevalence and abundance of parasites change across seven populations of the exotic lizard Hemidactylus mabouia in Northeast Brazil, and to describe ontogenetic and sex variations. We found differences in the composition of component communities and patterns of infection according to the host body size across the lizard populations. We did not find any variation between the sexes regarding epidemiological patterns, which can probably be explained by the similar diet and habitat use of male and female H. mabouia. An unusually high abundance and prevalence of trematodes infecting this host lizard was apparent when we compared other native lizard hosts, and we suggest that local environmental conditions might be advantageous to the development and life cycle of these parasites due to the abundance of all the intermediate and definitive hosts.

Effect of Bioactive Composites on Microhardness of Enamel Exposed to Carious Challenge.

This study verified if experimental composites containing calcium phosphate nanoparticles exert a protective effect against enamel demineralization. Three experimental resin-based composites containing 60 vol% of fillers were manipulated. Filler phase was constituted by silanized barium glass and 0%, 10% or 20% (by volume) of dicalcium phosphate dihydrate (DPCD) nanoparticles functionalized with the monomer triethylene glycol dimethacrylate (TEGDMA). Cavities (10 x 2 x 2 mm) were prepared in bovine enamel and restored using one of the experimental materials (n=10). Specimens were exposed to pH cycling (demineralizing solution: pH 5.0/4h, remineralizing solution: pH 7.0/20h, 14 days). Enamel Knoop microhardness (100g/10s) was measured on the surface (SH) and after transversal sectioning up to 90 µm depth (cross-sectional microhardness, CSH). Microhardness values and the percent of microhardness loss were analyzed ANOVA/Tukey test and Student's paired t-test (alpha: 5%). The materials did not differ in respect to SH. Enamel adjacent to DCPD-containing composite restorations showed smaller reductions in CSH (-1.2% to -3.5%) than the enamel from control group (-12.5%), while CSH of enamel restored with resin-modified glass ionomer was similar to the other groups (-4.5%). DCPD-containing composites reduced enamel demineralization in comparison to a conventional composite.

Superparamagnetic iron oxides nanoparticles from municipal solid waste incinerators.

During their production, management, and landfilling, bottom (BA) and fly (FA) ashes from municipal solid waste incineration may liberate Fe-bearing, ultrafine particles and easily enter different environmental sinks of the biosphere. We aim to explore a collection of BA and FA samples from Italian incinerators to probe magnetic mineralogy and the fraction of harmful superparamagnetic (SP) nanoparticles (d<30nm). X-ray diffraction, electron microscopy observation, temperature- and frequency-dependent magnetometry, and Mossbauer analysis are performed. The integration of information from our rock magnetic and non-magnetic techniques leads us to conclude that the dominant magnetic carrier in our samples is magnetite and its intermediate/impure forms, while sulphides (i.e., monoclinic pyrrhotite) are important ancillary magnetic phases. The SP fraction fluxing from the BA and FA outputs of a single incinerator is detected and estimated in 103tons/year. This work stresses the need to calibrate the current technologies towards a safer management of combustion ashes and certainly to inform the environmental impact assessment by using a combination of different methods.

Orofacial antinociceptive activity of (S)-(-)-perillyl alcohol in mice: a randomized, controlled and triple-blind study.

This study investigated the antinociceptive effects of (S)-(-)-perillyl alcohol (PA) on orofacial nociception in Swiss male mice using formalin-, capsaicin-, and glutamate-induced pain tests. For each test, eight animals per group were pre-treated intraperitoneally by a blinded investigator with PA (50 or 75mg/kg), morphine, or vehicle (saline+0.2% Tween 80). The treatment was performed before the induction of orofacial nociception by injecting formalin, capsaicin, or glutamate solution into the right area of the upper lip. The orofacial nociceptive behaviour was timed in all tests by an investigator who was blinded to the treatments. The statistical analysis was performed using confidence intervals (CI), the effect size, and power. PA blocked the orofacial nociceptive behaviour at both doses tested (P<0.05) similarly to morphine (P>0.05), in all tests. The effect size was high in the phase 1 formalin test for 50mg/kg PA (95% CI 0.48-2.31, power 84.6%) and 75mg/kg PA (95% CI 0.82-2.76, power 96.2%), in phase 2 for 75mg/kg PA (95% CI 0.44-2.26, power 82.3%), and in the glutamate test for 75mg/kg PA (95% CI 1.11-3.16, power 99.2%). These findings show strong evidence for the antinociceptive properties of PA in the orofacial region.

Metal removal from Municipal Solid Waste Incineration fly ash: A comparison between chemical leaching and bioleaching.

Bio- and hydrometallurgical experimental setups at 2-l reactor scale for the processing of fly ash from municipal waste incinerators were explored. We aimed to compare chemical H2SO4 leaching and bioleaching; the latter involved the use of H2SO4 and a mixed culture of acidophilic bacteria. The leaching yields of several elements, including some of those considered as critical (Mg, Co, Ce, Cr, Ga, Nb, Nd, Sb and Sm), are provided. At the end of the experiments, both leaching methods resulted in comparable yields for Mg and Zn (>90%), Al and Mn (>85%), Cr (∼65%), Ga (∼60%), and Ce (∼50%). Chemical leaching showed the best yields for Cu (95%), Fe (91%), and Ni (93%), whereas bioleaching was effective for Nd (76%), Pb (59%), and Co (55%). The two leaching methods generated solids of different quality with respect to the original material as we removed and significantly reduced the metals amounts, and enriched solutions where metals can be recovered for example as mixed salts for further treatment. Compared to chemical leaching the bioleaching halved the use of H2SO4, i.e., a part of agent costs, as a likely consequence of bio-produced acid and improved metal solubility.

Prevalence of Platynosomum fastosum infection in free roaming cats in northeastern Brazil: Fluke burden and grading of lesions.

The objective of this paper was to investigate prevalence and parasite load of the trematode Platynosomum fastosum infection and the risk of developing cholangitis/cholangiohepatitis among infected domestic cats in a city of northeastern Brazil, and to characterize the influence of fluke burden in the formation of lesions in liver and gallbladder. A total of 141 cats was necropsied and examined for the presence of P. fastosum. The observed prevalence was 42.6% (60/141, 95% CI=34.2-50.9). Parasite load varied from 1 to 219 flukes per animal. Adult cats were more frequently infected than kittens (p<0.01). Risk of cholangitis was about three times higher in infected animals (RR=3.23, 95% CI=2.01-5.07, p<0.01). Centrolobular congestion, portal cholangitis and cholestasis was significantly more common in infected as compared to non-infected cats (p<0.01). Similarly, fibrosis, cholangitis and mucous gland hyperplasia were significantly more prevalent in the bile duct of infected animals (p<0.01). Mild fibrosis and cholecystitis were observed principally in infected cats. Hyperplastic precursor lesions of cholangiocarcinoma were observed, but no solid tumor was diagnosed. These results reveal high prevalence of P. fastosum in free roaming cats in northeastern Brazil, with increased risk of liver disease.

Validation of EST-derived microsatellite markers for two Cerrado-endemic Campomanesia (Myrtaceae) species.

We assessed the transferability of 120 EST-derived Eucalyptus microsatellite primers to Campomanesia adamantium and C. pubescens. Both species are berry trees native to the Brazilian Cerrado, and population genetic information is poor. Twelve markers were used to analyze the genetic variability of four sampled populations. Regarding DNA extraction, we sampled leaf tissues from two populations of each species (80 individuals). Of the 120 primers evaluated, 87 did not amplify any PCR products, and 21 rendered nonspecific amplification. Twelve primers were successfully transferred, providing a low combined probability of genetic identity for both species (5.718 x 10(-10) for C. adamantium; 1.182 x 10(-11) for C. pubescens) and a high probability of paternity exclusion (0.99939 for C. adamantium; 0.99982 for C. pubescens). The average number of alleles in the polymorphic loci was 6.8 for C. adamantium and 7.8 for C. pubescens, ranging from 2 to 16 alleles per locus. The observed heterozygosity values for C. adamantium and C. pubescens were 0.504 and 0.503, respectively, and the expected heterozygosity values for C. adamantium and C. pubescens were 0.517 and 0.579, respectively. The populations exhibited structured genetic variability with qP values of 0.105 for C. adamantium and 0.249 for C. pubescens. Thus, we concluded that these 12 microsatellite markers, transferred from Eucalyptus, were efficient for population genetic studies of C. adamantium and C. pubescens.

Analysis of the mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites.

This work describes the study to investigate and compare the mechanical and thermal properties of raw jute and glass fiber reinforced epoxy hybrid composites. To improve the mechanical properties, jute fiber was hybridized with glass fiber. Epoxy resin, jute and glass fibers were laminated in three weight ratios (69/31/0, 68/25/7 and 64/18/19) respectively to form composites. The tensile, flexural, impact, density, thermal and water absorption tests were carried out using hybrid composite samples. This study shows that the addition of jute fiber and glass fiber in epoxy, increases the density, the impact energy, the tensile strength and the flexural strength, but decreases the loss mass in function of temperature and the water absorption. Morphological analysis was carried out to observe fracture behavior and fiber pull-out of the samples using scanning electron microscope.

The energetic characterization of pineapple crown leaves.

Energetic characterization of biomass allows for assessing its energy potential for application in different conversion processes into energy. The objective of this study is to physicochemically characterize pineapple crown leaves (PC) for their application in energy conversion processes. PC was characterized according to ASTM E871-82, E1755-01, and E873-82 for determination of moisture, ash, and volatile matter, respectively; the fixed carbon was calculated by difference. Higher heating value was determined by ASTM E711-87 and ash chemical composition was determined by XRF. The thermogravimetric and FTIR analyses were performed to evaluate the thermal decomposition and identify the main functional groups of biomass. PC has potential for application in thermochemical processes, showing high volatile matter (89.5%), bulk density (420.8 kg/m(3)), and higher heating value (18.9 MJ/kg). The results show its energy potential justifying application of this agricultural waste into energy conversion processes, implementing sustainability in the production, and reducing the environmental liabilities caused by its disposal.

Micro-CT evaluation of calcium hydroxide removal through passive ultrasonic irrigation associated with or without an additional instrument.

AIM: To use computerized microtomography (micro-CT) to evaluate the efficacy of passive ultrasonic irrigation (PUI), with or without an additional file (F5), in removing calcium hydroxide medication. METHODOLOGY: The root canals of single-rooted human teeth were prepared with a ProTaper(®) F4 file (Dentsply Maillefer) and filled with calcium hydroxide/propylene glycol 400 paste. After 30 days of storage under 100% humidity, the teeth were divided into four groups (n = 8) according to the removal technique: passive ultrasonic irrigation (PUI) only, additional file only (file F5), PUI + additional file and master apical file only (F4, control). The specimens were scanned (SkyScan 1174, resolution: 14.36 µm) after chemomechanical preparation, 30 days after the application of Ca(OH)2 paste and following its removal. The percentage of medicament remaining was calculated in terms of total canal volume and medicament volume after storage, based on microtomographic images. Data were analysed using three-way anova/Tukey's test or Kruskal-Wallis/Student-Newman-Keuls test (alpha: 5%). RESULTS: The use of PUI resulted in lower Ca(OH)2 residue volumes (3.7%) compared to when PUI was not used (6.4%; P < 0.001). The use of the additional file did not significantly influence the percentage of remaining Ca(OH)2 . The percentage of Ca(OH)2 residue was greater in the apical region (6.4%) than in the cervical region (3.8%; P < 0.01). CONCLUSIONS: The use of PUI resulted in more effective Ca(OH)2 paste removal relative to the control regardless of the use of the additional file. The apical region had the highest residue volumes in all techniques.

Ion release and mechanical properties of calcium silicate and calcium hydroxide materials used for pulp capping.

AIM: To compare the ion release and mechanical properties of a calcium hydroxide (Dycal) and two calcium silicate (MTA Angelus and Biodentine) cements. METHODOLOGY: Calcium and hydroxyl ion release in water from 24-h set cements were calculated from titration with HCl (n = 3). Calcium release after 7, 14, 21 and 28 days at pH 5.5 and 7.0 was measured using ICP-OES (n = 6). Flexural strength (FS) and modulus (E) were tested after 48-h storage, and compressive strength (CS) was tested after 48 h and 7 days (n = 10). Ion release and mechanical data were subjected to anova/Tukey and Kruskal-Wallis/Mann-Whitney tests, respectively (α = 0.05). RESULTS: Titration curves revealed that Dycal released significantly fewer ions in solution than calcium silicates (P < 0.001). Calcium release remained constant at pH 7.0, whilst at pH 5.5, it dropped significantly by 24% after 21 days (P < 0.05). At pH 5.5, MTA Angelus released significantly more calcium than Dycal (P < 0.01), whilst Biodentine had superior ion release than Dycal at pH 7.0 (P < 0.01). Biodentine had superior flexural strength, flexural modulus and compressive strength than the other cements, whilst MTA Angelus had higher modulus than Dycal (P < 0.001). CONCLUSIONS: Immediate calcium and hydroxyl ion release in solution was significantly lower for Dycal. In general, all materials released constant calcium levels over 28 days, but release from Dycal was significantly lower than Biodentine and MTA Angelus depending on pH conditions. Biodentine had substantially higher strength and modulus than MTA Angelus and Dycal, both of which demonstrated low stress-bearing capabilities.

Mapping camphorquinone consumption, conversion and mechanical properties in methacrylates with systematically varied CQ/amine compositions.

OBJECTIVES: To evaluate conversion, bulk mechanical properties and camphorquinone (CQ) consumption in methacrylate resins, comprising a range of overall initiator concentrations and CQ/amine ratios. METHODS: BisGMA (Bisphenol-A glycidyl dimethacrylate), TEGDMA (triethyleneglycol dimethacrylate) and UDMA (urethane dimethacrylate) were mixed at a 1:1:1 molar ratio. CQ was used as the visible light photosensitizer, in combination with EDMAB (Ethyl p-dimethylamino benzoate), at 3:1, 2:1, 1:1, 1:2 and 1:3 weight ratios, at 0.5, 1.0, 1.5, 2.0 and 3.0 wt% overall initiator concentration. Butylhydroxytoluene was added at 0.05 wt% as an inhibitor. Unfilled resins were photoactivated with a dental light source (VIP Jr, Bisco) for 60 s at 600 mW/cm(2). Flexural strength/modulus were assessed in 2×1×10 mm bars, tested in three-point bending. Degree of conversion was assessed at the bottom of the same specimens using FT-RAMAN. CQ consumption was measured using a UV-vis spectrometer. Data were analyzed with two-way ANOVA/Tukey test (α=5%). RESULTS: Lower conversion and inferior mechanical properties were observed with lower overall initiator concentrations and higher amine/CQ ratios. The lowest overall initiator concentration (0.5%) presented the statistically lowest conversion/properties results, except for the 1:3 amine/CQ ratio. For overall concentrations equal or greater to 1.5%, the amine/CQ ratio did not influence conversion or mechanical properties. CQ consumption was less efficient for the highest overall initiator concentrations and lower amine/CQ ratios. CLINICAL RELEVANCE: Above 1.5 wt% overall initiator concentration, the conversion and general mechanical properties were independent of the initiator concentration. Therefore, there seems to be no benefit to increasing the initiator concentration above that level. At higher camphorquinone concentrations, light transmission and photosensitizer consumption becomes impaired, which could lead to decreased depth of cure and yellowing of the restoration.