Three-dimensional organization of pyrrolo[3,2-b]pyrrole-based triazine framework using nanostructural spherical carbon: enhancing electrochemical performance of materials for supercapacitors.

Covalent triazine-based frameworks have attracted much interest recently due to their high surface area and excellent thermal and electrochemical stabilities. This study shows that covalently immobilizing triazine-based structures on spherical carbon nanostructures results in the organization of micro- and mesopores in a three-dimensional manner. We selected the nitrile-functionalized pyrrolo[3,2-b]pyrrole unit to form triazine rings to construct a covalent organic framework. Combining spherical carbon nanostructures with the triazine framework produced a material with unique physicochemical properties, exhibiting the highest specific capacitance value of 638 F g-1 in aqueous acidic solutions. This phenomenon is attributed to many factors. The material exhibits a large surface area, a high content of micropores, a high content of graphitic N, and N-sites with basicity and semi-crystalline character. Thanks to the high structural organization and reproducibility, and remarkably high specific capacitance, these systems are promising materials for use in electrochemistry. For the first time, hybrid systems containing triazine-based frameworks and carbon nano-onions were used as electrodes for supercapacitors.

Exposure to polystyrene nanoparticles leads to changes in the zeta potential of bacterial cells.

Polymer molecules, the main components of plastics, are an emerging pollutants in various environmental compartments (water, air, soil) that may induce several ecotoxicological effects on live organisms. Therefore, understanding how plastic particles interact with bacterial cell membranes is crucial in analysing their associated risks in ecosystems and human microbiota. However, relatively little is known about the interaction between nanoplastics and bacteria. The present work focuses on Staphylococcus aureus and Klebsiella pneumoniae, representing the Gram-positive and Gram-negative bacteria respectively, exposed to 100 nm diameter polystyrene nanoparticles (PS NPs). The nanoparticles attach to the cells' membranes of both bacteria, changing their electrical charge, but without the effect of killing the cells. PS NPs caused a change in zeta potential values (both species of bacterial strains), dependent on particle concentration, pH, as well as on exposure time of bacteria to them. Through the application of AFM and FTIR techniques, the presence of PS NPs on bacterial surfaces was detected, suggesting the affinity of the particles to bacterial components, but without any changes in the morphology of the tested bacteria. The zeta potential can be more widely used in the study of interactions between nanostructures and cells.

Composites containing resins and carbon nano-onions as efficient porous carbon materials for supercapacitors.

Herein, we report the functionalization of carbon nano-onions (CNOs) with the hydroxyaryl group and subsequent modifications with resins: resorcinol-formaldehyde using porogenic Pluronic F-127, resorcinol-formaldehyde-melamine, benzoxazine made of bisphenol A and triethylenetetramine, and calix[4]resorcinarene-derived using F-127. Following the direct carbonization, extensive physicochemical analysis was carried out, including Fourier transform infrared, Raman and X-ray photoelectron spectroscopy, scanning and transmission electron microscopy, and adsorption-desorption of N2. The addition of CNO to the materials significantly increases the total pore volume (up to 0.932 cm3 g-1 for carbonized resorcinol-formaldehyde resin and CNO (RF-CNO-C) and 1.242 cm3 g-1 for carbonized resorcinol-formaldehyde-melamine resin and CNO (RFM-CNO-C)), with mesopores dominating. However, the synthesized materials have poorly ordered domains with some structural disturbance; the RFM-CNO-C composite shows a more ordered structure with amorphous and semi-crystalline regions. Subsequently, cyclic voltammetry and galvanostatic charge-discharge method studied the electrochemical properties of all materials. The influence of resins' compositions, CNO content, and amount of N atoms in carbonaceous skeleton on the electrochemical performance was studied. In all cases, adding CNO to the material improves its electrochemical properties. The carbon material derived from CNO, resorcinol and melamine (RFM-CNO-C) showed the highest specific capacitance of 160 F g-1 at a current density of 2 A g-1, which is stable after 3000 cycles. The RFM-CNO-C electrode retains approximately 97% of its initial capacitive efficiency. The electrochemical performance of the RFM-CNO-C electrode results from the hierarchical porosity's stability and the presence of nitrogen atoms in the skeleton. This material is an optimal solution for supercapacitor devices.

Carbon nano-onion induced organization of polyacrylonitrile-derived block star polymers to obtain mesoporous carbon materials.

Herein, we report the synthesis of mesoporous carbon materials from diblock star copolymers derived from polyacrylonitrile. The size of the pores was controlled by manipulating the length of the polymer blocks. Furthermore, the organization of polymers on the carbon nano-onion's surface resulted in materials of higher surface area and superficial electrochemical performance.

Polymeric Network Hierarchically Organized on Carbon Nano-onions: Block Polymerization as a Tool for the Controlled Formation of Specific Pore Diameters.

The organization of specific pores in carbonaceous three-dimensional networks is crucial for efficient electrocatalytic processes and electrochemical performance. Therefore, the synthesis of porous materials with ordered and well-defined pores is required in this field. The incorporation of carbon nanostructures into polymers can create material structures that are more ordered in comparison to those of the pristine polymers. In this study we applied polymer-templated methods of carbon material preparation, in which outer blocks of the star copolymers form the carbon skeleton, while the core part is pore-forming. Well-defined 6-star-(poly(methyl acrylate)-b-poly(4-acetoxystyrene)) dendrimers were synthesized by reversible addition-fragmentation chain-transfer polymerization. They were then transformed into poly(4-vinylphenol) derivatives (namely 6-star-(poly(methyl acrylate)-b-poly(4-vinylphenol)), subjected to polycondensation with formaldehyde, and pyrolyzed at 800 °C. Cross-linking of phenolic groups provides a polymer network that does not depolymerize by pyrolysis, unlike poly(methyl acrylate) chains. The selected star polymers were attached to carbon nano-onions (CNOs) to improve the organization of the polymer chains. Herein, the physicochemical properties of CNO-polymer hybrids, including the textural and the electrochemical properties, were compared with those of the pristine pyrolyzed polymers obtained under analogous experimental conditions. For these purposes, we used several experimental and theoretical methods, such as infrared, Raman, and X-ray photoelectron spectroscopy, nitrogen adsorption/desorption measurements, scanning and transmission electron microscopy, and electrochemical studies, including cyclic voltammetry. All of the porous materials were evaluated for use as supercapacitors.

The Effect of Submicron Polystyrene on the Electrokinetic Potential of Cell Membranes of Red Blood Cells and Platelets.

In recent years, many scientists have studied the effects of polymer micro- and nanostructures on living organisms. As it turns out, plastic can be a component of the blood of livestock, eaten by humans around the globe. Thus, it seems important to investigate possible changes in the physicochemical parameters and morphology of the cell membranes of blood morphotic elements (red blood cells and platelets) under the influence of polymer particles. The article presents research in which cell membranes were exposed to plain polystyrene (PS) and amino-functionalized polystyrene (PS-NH2) of two different sizes. The polymers were characterized by infrared spectroscopy and dynamic light-scattering methods. To analyze possible changes caused by polymer exposure in the structure of the membranes, their zeta potentials were measured using the electrophoretic light-scattering technique. The concentration of the polymers, as well as the exposure time, were also taken into the consideration during the research. Based on the obtained results, we concluded that 100 and 200 nm PS, as well as 100 nm PS-NH2, internalize into the cells. On the contrary, 200 nm PS-NH2 particles attach to cell membranes. Our study clearly shows that particle size and surface chemistry determine the interaction with biological membranes.

Microwave-Assisted Synthesis of Modified Glycidyl Methacrylate-Ethyl Methacrylate Oligomers, Their Physico-Chemical and Biological Characteristics.

In this study, well-known oligomers containing ethyl methacrylate (EMA) and glycidyl methacrylate (GMA) components for the synthesis of the oligomeric network [P(EMA)-co-(GMA)] were used. In order to change the hydrophobic character of the [P(EMA)-co-(GMA)] to a more hydrophilic one, the oligomeric chain was functionalized with ethanolamine, xylitol (Xyl), and L-ornithine. The oligomeric materials were characterized by nuclear magnetic resonance and Fourier transform infrared spectroscopy, scanning electron microscopy, and differential thermogravimetric analysis. In the final stage, thanks to the large amount of -OH groups, it was possible to obtain a three-dimensional hydrogel (HG) network. The HGs were used as a matrix for the immobilization of methylene blue, which was chosen as a model compound of active substances, the release of which from the matrix was examined using spectrophotometric detection. The cytotoxic test was performed using fluid extracts of the HGs and human skin fibroblasts. The cell culture experiment showed that only [P(EMA)-co-(GMA)] and [P(EMA)-co-(GMA)]-Xyl have the potential to be used in biomedical applications. The studies revealed that the obtained HGs were porous and non-cytotoxic, which gives them the opportunity to possess great potential for use as an oligomeric network for drug reservoirs in in vitro application.

The electrochemical properties of nanocomposite films obtained by chemical in situ polymerization of aniline and carbon nanostructures.

Interactions between the π bonds in the aromatic rings of polyaniline (PANI) with carbon nanostructures (CNs) facilitate charge transfer between the two components. Different types of phenyleneamine-terminated CNs, including carbon nano-onions (CNOs) and single-walled and multi-walled carbon nanotubes (SWNTs and MWNTs, respectively), were prepared as templates, and the CN/PANI nanocomposites were easily prepared with uniform core-shell structures. By varying the ratio of the aniline monomers relative to the CNs in the in situ chemical polymerization process, the thickness of the PANI layers was effectively controlled. The morphological and electrical properties of the nanocomposite were determined and compared. The thickness and structure of the PANI films on the CNs were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and infrared spectroscopy. TEM and SEM revealed that the composite films consisted of nanoporous networks of CNs coated with polymeric aniline. The electrochemical properties of the composites were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. These studies showed that the CN/PANI composite films had lower resistance than pure polymeric films of PANI, and the presence of CNs much improved the mechanical stability. The specific electrochemical capacitance of the CNO/PANI composite films was significantly larger than for pure PANI.

Surface Plasmon Resonance Imaging biosensor for cystatin determination based on the application of bromelain, ficin and chymopapain.

A Surface Plasmon Resonance Imaging (SPRI) sensor based on bromelain or chymopapain or ficin has been developed for specific cystatin determination. Cystatin was captured from a solution by immobilized bromelain or chymopapain or ficin due to the formation of an enzyme-inhibitor complex on the biosensor surface. The influence of bromelain, chymopapain or ficin concentration, as well as the pH of the interaction on the SPRI signal, was investigated and optimized. Sensor dynamic response range is between 0-0.6 µg/ml and the detection limit is equal to 0.1 µg/ml. In order to demonstrate the sensor potential, cystatin was determined in blood plasma, urine and saliva, showing good agreement with the data reported in the literature.

Preparation and characterization of composites that contain small carbon nano-onions and conducting polyaniline.

Small multilayer fullerenes, also known as carbon nano-onions (CNOs; 5-6 nm in diameter, 6-8 shells), show higher reactivity than other larger carbon nanostructures. Here we report the first example of an in situ polymerization of aniline on phenyleneamine-terminated CNO surfaces. The green, protonated, conducting emeraldine polyaniline (PANI) was directly synthesized on the surface of the CNO. The functionalized and soluble CNO/PANI composites were characterized by TEM, SEM, DSC, Raman, and infrared spectroscopy. The electrochemical properties of the conducting CNO/PANI films were also investigated. In comparison with pristine CNOs, functionalized carbon nanostructures show dramatically improved solubility in protic solvents, thus enabling their easy processing for coatings, nanocomposites, and biomedical applications.

Bis(2,2':6',2''-terpyridine)-ruthenium(II) bis-(perchlorate) hemihydrate.

The asymmetric unit of the title compound, [Ru(C(15)H(11)N(3))(2)](ClO(4))(2)·0.5H(2)O, contains one ruthenium-terpiridine complex cation, two perchlorate anions and one half-mol-ecule of water. Face-to-face and face-to-edge π-stacking inter-actions between terpyridine units [centroid-centroid distances = 3.793 (2) and 3.801 (2)  Å] stabilize the crystal lattice The partially occupied water mol-ecule inter-acts with two perchlorate ions via O-H⋯O hydrogen bonds. In the crystal lattice, the complex cations, perchlorate ion-water pairs and the second perchlorate anions are arranged into columns along b direction.