RESUMO
Ruddlesden-Popper-type oxides exhibit remarkable chemical stability in comparison to perovskite oxides. However, they display lower oxygen permeability. We present an approach to overcome this trade-off by leveraging the anisotropic properties of Nd2 NiO4+δ . Its (a,b)-plane, having oxygen diffusion coefficient and surface exchange coefficient several orders of magnitude higher than its c-axis, can be aligned perpendicular to the gradient of oxygen partial pressure by a magnetic field (0.81 T). A stable and high oxygen flux of 1.40â mL min-1 cm-2 was achieved for at least 120â h at 1223â K by a textured asymmetric disk membrane with 1.0â mm thickness under the pure CO2 sweeping. Its excellent operational stability was also verified even at 1023â K in pure CO2 . These findings highlight the significant enhancement in oxygen permeation membrane performance achievable by adjusting the grain orientation. Consequently, Nd2 NiO4+δ emerges as a promising candidate for industrial applications in air separation, syngas production, and CO2 capture under harsh conditions.
RESUMO
The aim of this study was to determine the effect of sandblasting, grinding and plasma treatment on the adhesive bond strength between framework ceramic (Y-TZP) and veneering ceramic (feldspar ceramic). Therefore, four-point bending specimens (n = 180) were cut from densely sintered 3Y-TZP blanks. Subsequently, 80 of these samples received surface treatment by sandblasting and 80 samples by grinding. A reference group (20 samples) was not processed. Half of the specimens that received a surface treatment were additionally exposed to an oxygen plasma treatment. After processing, all specimens were manually veneered with feldspar ceramic and examined with a four-point bending test to evaluate the strain energy release rate G. The surface treatment parameters that achieved the highest and lowest G were transferred to real geometries of a posterior crown (n = 45). The crowns' ceramic framework was sandblasted and veneered by hand. The all-ceramic crowns were tested in a dynamic loading test and Wöhler curves were evaluated. Four-point bending samples blasted at an angle of 90° at 6 bar and a working distance of 1.5 cm without plasma treatment achieved the highest energy release rate. Samples blasted at an angle of 90° at 2 bar and a working distance of 1 cm with plasma treatment achieved the lowest energy release rate. Overall, plasma treatment did not improve bond strength. In the dynamic loading test, the group blasted with 2 bar showed the best results.
Assuntos
Colagem Dentária , Zircônio , Zircônio/química , Teste de Materiais , Propriedades de Superfície , Coroas , Cerâmica/química , Porcelana Dentária , Análise do Estresse Dentário , Facetas DentáriasRESUMO
The need for rare resources, such as tungsten or cobalt, combined with the high energy requirements to produce cutting materials, is forcing research and development to work out environmentally friendly alternatives. Natural rocks could be an alternative since they are available in large quantities worldwide, have a potentially suitable property profile, and do not require energy-intensive processes to make them usable as cutting materials. However, there are only a few studies on the usability and suitability of natural rocks as cutting materials for machining processes. Therefore, in this article, inserts made of natural rocks were ground and used in turning operations. First, the properties of various natural rocks were determined, as were the tool properties after grinding. Then, the tool load and wear during the machining process were recorded and evaluated to assess the potential applications of this alternative cutting material more accurately. It is therefore becoming apparent that flint and quartz are suitable for use as alternative cutting materials and should be further researched.