Waveguide-integrated chip-scale optomechanical magnetometer.

Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read-out via a suspended optical waveguide fabricated on the same silicon chip as the magnetometer. Moreover, we demonstrate that thermomechanical noise limited sensitivity is possible using portable electronics and laser. The magnetometer employs a silica microdisk resonator selectively sputtered with a magnetostrictive film of galfenol (FeGa) which induces a resonant frequency shift in response to an external magnetic field. Experimental results reveal the retention of high quality-factor optical whispering gallery mode resonances whilst also demonstrating high sensitivity and dynamic range in ambient conditions. The use of off-the-shelf portable electronics without compromising sensor performance demonstrates promise for applications.

Measurement-based preparation of multimode mechanical states.

Nanomechanical resonators are a key tool for future quantum technologies, such as quantum force sensors and interfaces, and for studies of macroscopic quantum physics. The ability to prepare room temperature nonclassical states is a major outstanding challenge. It has been suggested that this could be achieved using a fast continuous measurement to break the usual symmetry between position and momentum. Here, we demonstrate this symmetry breaking and use it to prepare a thermally squeezed mechanical state. Our experiments take advantage of collective measurements on multiple mechanical modes, which we show can increase the measurement speed and improve state preparation. Theoretically, we show that this result extends to the quantum regime, relaxing the requirements to generate nonclassical states. We predict that multimode conditioning can enable room temperature quantum squeezing with existing technology. Our work paves the way toward room temperature quantum nanomechanical devices and toward their application in quantum technology and fundamental science.

Precision Magnetometers for Aerospace Applications: A Review.

Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration-including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles-is also a key scientific and technological frontier, believed by many to be paramount to the long-term survival and prosperity of humanity. All of these aerospace applications require reliable control of the craft and the ability to record high-precision measurements of physical quantities. Magnetometers deliver on both of these aspects and have been vital to the success of numerous missions. In this review paper, we provide an introduction to the relevant instruments and their applications. We consider past and present magnetometers, their proven aerospace applications, and emerging uses. We then look to the future, reviewing recent progress in magnetometer technology. We particularly focus on magnetometers that use optical readout, including atomic magnetometers, magnetometers based on quantum defects in diamond, and optomechanical magnetometers. These optical magnetometers offer a combination of field sensitivity, size, weight, and power consumption that allows them to reach performance regimes that are inaccessible with existing techniques. This promises to enable new applications in areas ranging from unmanned vehicles to navigation and exploration.

Laser stabilization to neutral Yb in a discharge with polarization-enhanced frequency modulation spectroscopy.

Isotope selective optical excitation of atoms is important for experiments with neutral atoms, metrology, and work with trapped ions, including quantum information processing. Polarization-enhanced absorption spectroscopy is used to frequency stabilize a tunable external cavity laser diode system at 398.9 nm for isotope selective photoionization of neutral Yb atoms. This spectroscopy technique is used to measure isotope resolved dispersive features from transitions within a see-through configuration ytterbium hollow-cathode discharge lamp. This Doppler-free dichroic polarization spectroscopy is realized by retro-reflecting a laser beam through the discharge and analyzing the polarization dependent absorption with balanced detection. The spectroscopy signal is recovered using lock-in detection of frequency modulation induced by current modulation of the external cavity laser diode. Here, we show an order of magnitude improvement in the long-term stability using polarization-enhanced absorption spectroscopy of Yb compared to polarization spectroscopy.

Multichannel optomechanical switch and locking system for wavemeters.

Here we present a cost-effective multichannel optomechanical switch and software proportional-integral-derivative (PID) controller system for locking multiple lasers to a single-channel commercial wavemeter. The switch is based on a rotating cylinder that selectively transmits one laser beam at a time to the wavemeter. The wavelength is read by the computer, and an error signal is output to the lasers to correct wavelength drifts every millisecond. We use this system to stabilize 740 nm (subsequently frequency doubled to 370 nm), 399 nm, and 935 nm lasers for trapping and cooling different isotopes of a Yb+ ion. We characterize the frequency stability of the three lasers by using a second, more precise, commercial wavemeter. We also characterize the absolute frequency stability of the 740 nm laser using the fluorescence drift rate of a trapped 174Yb+ ion. For the 740 nm laser we demonstrate an Allan deviation σy of 3×10-10 (at 20 s integration time), equivalent to sub-200 kHz stability.

Sticky collisions of ultracold RbCs molecules.

Understanding and controlling collisions is crucial to the burgeoning field of ultracold molecules. All experiments so far have observed fast loss of molecules from the trap. However, the dominant mechanism for collisional loss is not well understood when there are no allowed 2-body loss processes. Here we experimentally investigate collisional losses of nonreactive ultracold 87Rb133Cs molecules, and compare our findings with the sticky collision hypothesis that pairs of molecules form long-lived collision complexes. We demonstrate that loss of molecules occupying their rotational and hyperfine ground state is best described by second-order rate equations, consistent with the expectation for complex-mediated collisions, but that the rate is lower than the limit of universal loss. The loss is insensitive to magnetic field but increases for excited rotational states. We demonstrate that dipolar effects lead to significantly faster loss for an incoherent mixture of rotational states.

Tunable cw UV laser with <35 kHz absolute frequency instability for precision spectroscopy of Sr Rydberg states.

We present a solid-state laser system that generates over 200 mW of continuous-wave, narrowband light, tunable from 316.3 nm - 317.7 nm and 318.0 nm - 319.3 nm. The laser is based on commercially available fiber amplifiers and optical frequency doubling technology, along with sum frequency generation in a periodically poled stoichiometric lithium tantalate crystal. The laser frequency is stabilized to an atomic-referenced high finesse optical transfer cavity. Using a GPS-referenced optical frequency comb we measure a long term frequency instability of < 35 kHz for timescales between 10(-3) s and 10(3) s. As an application we perform spectroscopy of Sr Rydberg states from n = 37 - 81, demonstrating mode-hop-free scans of 24 GHz. In a cold atomic sample we measure Doppler-limited linewidths of 350 kHz.