Use of Microwave Dielectric Spectroscopy for the In Actu Assessment of Frustrated Lewis Pair Encounter Complexes.

Frustrated Lewis pairs (FLPs) offer an important and promising paradigm for main group catalysis. Reported here is the use of microwave dielectric spectroscopy for the in actu detection of FLP encounter complexes. This technique focuses on the room-temperature measurement of the loss component of microwave permittivity (ε2) over the bandwidth from 0.5 to 6.8 GHz. The microwave loss measured for a Lewis pair in a toluene host solution is compared with the losses of the individual components when measured separately, and the difference in loss Δε2 is used to characterize the electrostatic interaction between the pair. The Δε2 value shows a direct correlation with an ability for the FLP encounter complex to split hydrogen gas and abstract hydrogen from γ-terpinene and has led to the identification of a novel FLP encounter complex, tris-pentafluorophenyl borane-eucalyptol pairing.

Extended Quinolizinium-Fused Corannulene Derivatives: Synthesis and Properties.

Reported here is the design and synthesis of a novel class of extended quinolizinium-fused corannulene derivatives with curved geometry. These intriguing molecules were synthesized through a rationally designed synthetic strategy, utilizing double Skraup-Doebner-Von Miller quinoline synthesis and a rhodium-catalyzed C-H activation/annulation (CHAA) as the key steps. Single-crystal X-ray analysis revealed a bowl depth of 1.28-1.50 Å and a unique "windmill-like" shape packing of 12a(2PF6-) due to the curvature and incorporation of two aminium ions. All of the newly reported curved salts exhibit green to orange fluorescence with enhanced quantum yields (Φf = 9-13%) and improved dispersibility compared to the pristine corannulene (Φf = 1%). The reduced optical energy gap and lower energy frontier orbital found by doping extended corannulene systems with nitrogen cations was investigated by UV-vis, fluorescence, and theoretical calculations. Electrochemical measurements reveal a greater electron-accepting behavior compared with that of their pyridine analogues. The successful synthesis, isolation, and evaluation of these curved salts provide a fresh perspective and opportunity for the design of cationic nitrogen-doped curved aromatic hydrocarbon-based materials.

Evolution of Solid Processing Methods in Continuous Flow Technology: Reactive Extrusion.

The frustrations of precipitation, fouling and blockages of liquid-based flow reactors is familiar to all researchers that have worked with continuous flow equipment. There have been many innovative solutions to try and circumvent this issue. This short review will highlight the emerging technique of mechanochemistry and reactive extrusion as a continuous process that can directly work on solid (and liquid) materials and elicit chemical transformations.

Fluorochemicals from fluorspar via a phosphate-enabled mechanochemical process that bypasses HF.

All fluorochemicals-including elemental fluorine and nucleophilic, electrophilic, and radical fluorinating reagents-are prepared from hydrogen fluoride (HF). This highly toxic and corrosive gas is produced by the reaction of acid-grade fluorspar (>97% CaF2) with sulfuric acid under harsh conditions. The use of fluorspar to produce fluorochemicals via a process that bypasses HF is highly desirable but remains an unsolved problem because of the prohibitive insolubility of CaF2. Inspired by calcium phosphate biomineralization, we herein disclose a protocol of treating acid-grade fluorspar with dipotassium hydrogen phosphate (K2HPO4) under mechanochemical conditions. The process affords a solid composed of crystalline K3(HPO4)F and K2-xCay(PO3F)a(PO4)b, which is found suitable for forging sulfur-fluorine and carbon-fluorine bonds.

Correction to "Safety Considerations and Proposed Workflow for Laboratory Scale Chemical Synthesis by Ball Milling".

[This corrects the article DOI: 10.1021/acs.oprd.2c00226.].

Mechanical Activation of Zero-Valent Metal Reductants for Nickel-Catalyzed Cross-Electrophile Coupling.

The cross-electrophile coupling of either twisted-amides or heteroaryl halides with alkyl halides, enabled by ball-milling, is herein described. The operationally simple nickel-catalyzed process has no requirement for inert atmosphere or dry solvents and delivers the corresponding acylated or heteroarylated products across a broad range of substrates. Key to negating the necessity of inert reaction conditions is the mechanical activation of the raw metal terminal reductant: manganese in the case of twisted amides and zinc for heteroaryl halides.

Continuous Flow Generation of Acylketene Intermediates via Nitrogen Extrusion.

A flow chemistry process for the generation and use of acylketene precursors through extrusion of nitrogen gas is reported. Key to the development of a suitable continuous protocol is the balance of reaction concentration against pressure in the flow reactor. The resulting process enables access to intercepted acylketene scaffolds using volatile amine nucleophiles and has been demonstrated on the gram scale. Thermal gravimetric analysis was used to guide the temperature set point of the reactor coils for a variety of acyl ketene precursors. The simultaneous generation and reaction of two reactive intermediates (both derived from nitrogen extrusion) is demonstrated.

Challenges Arising from Continuous-Flow Olefin Metathesis.

The versatility of olefin metathesis is evident from its successful applications ranging from natural product synthesis to the valorization of renewable feedstocks. On the other side, flow chemistry has recently gained particular interest among the synthetic community, offering valuable alternatives to classic batch chemistry and paving the way to the development of new transformations. The application of continuous-flow methods to olefin metathesis represents one of the most promising evolutions in the field at the interface of industrially relevant synthesis and reactor engineering, significantly improving some of the typical problems such as undesired self-reactions and ethylene-mediated catalyst deactivation. This Minireview aims to provide a brief survey covering the major aspects of those techniques which we hope may be of interest for the chemical community as well as those interested in catalysis, continuous processing, enabling technologies and reactor design.

Continuous flow mechanochemistry: reactive extrusion as an enabling technology in organic synthesis.

Rapid and wide-ranging developments have established mechanochemistry as a powerful avenue in sustainable organic synthesis. This is primarily due to unique opportunities which have been offered in solvent-free - or highly solvent-minimised - reaction systems. Nevertheless, despite elegant advances in ball-milling technology, limitations in scale-up still remain. This tutorial review covers the first reports into the translation from "batch-mode" ball-milling to "flow-mode" reactive extrusion, using twin-screw extrusion.

Electrochemical Deconstructive Functionalization of Cycloalkanols via Alkoxy Radicals Enabled by Proton-Coupled Electron Transfer.

Herein, we report a new electrochemical method for alkoxy radical generation from alcohols using a proton-coupled electron transfer (PCET) approach, showcased via the deconstructive functionalization of cycloalkanols. The electrochemical method is applicable across a diverse array of substituted cycloalkanols, accessing a broad range of synthetically useful distally functionalized ketones. The orthogonal derivatization of the products has been demonstrated through chemoselective transformations, and the electrochemical process has been performed on a gram scale in continuous single-pass flow.

Mechanochemical Organocatalysis: Do High Enantioselectivities Contradict What We Might Expect?

Ball mills input energy to samples by pulverising the contents of the jar. Each impact on the sample or wall of the jar results in an instantaneous transmission of energy in the form of a temperature and pressure increase (volume reduction). Conversely, enantioselective organocatalytic reactions proceed through perceived delicate and well-organised transition states. Does there exist a dichotomy in the idea of enantioselective mechanochemical organocatalysis? This Review provides a survey of the literature reporting the combination of organocatalytic reactions with mechanochemical ball milling conditions. Where possible, direct comparisons of stirred in solution, stirred neat and ball milled processes are drawn with a particular focus on control of stereoselectivity.

A Ball-Milling-Enabled Cross-Electrophile Coupling.

The nickel-catalyzed cross-electrophile coupling of aryl halides and alkyl halides enabled by ball-milling is herein described. Under a mechanochemical manifold, the reductive C-C bond formation was achieved in the absence of bulk solvent and air/moisture sensitive setups, in reaction times of 2 h. The mechanical action provided by ball milling permits the use of a range of zinc sources to turnover the nickel catalytic cycle, enabling the synthesis of 28 cross-electrophile coupled products.

Ball-Milling-Enabled Reactivity of Manganese Metal*.

Efforts to generate organomanganese reagents under ball-milling conditions have led to the serendipitous discovery that manganese metal can mediate the reductive dimerization of arylidene malonates. The newly uncovered process has been optimized and its mechanism explored using CV measurements, radical trapping experiments, EPR spectroscopy, and solution control reactions. This unique reactivity can also be translated to solution whereupon pre-milling of the manganese is required.

Direct Amidation of Esters by Ball Milling*.

The direct mechanochemical amidation of esters by ball milling is described. The operationally simple procedure requires an ester, an amine, and substoichiometric KOtBu and was used to prepare a large and diverse library of 78 amide structures with modest to excellent efficiency. Heteroaromatic and heterocyclic components are specifically shown to be amenable to this mechanochemical protocol. This direct synthesis platform has been applied to the synthesis of active pharmaceutical ingredients (APIs) and agrochemicals as well as the gram-scale synthesis of an active pharmaceutical, all in the absence of a reaction solvent.

Accessing novel fluorinated heterocycles with the hypervalent fluoroiodane reagent by solution and mechanochemical synthesis.

A new and efficient strategy for the rapid formation of novel fluorinated tetrahydropyridazines and dihydrooxazines has been developed by fluorocyclisation of ß,γ-unsaturated hydrazones and oximes with the fluoroiodane reagent. Mechanochemical synthesis delivered fluorinated tetrahydropyridazines in similar excellent yields to conventional solution synthesis, whereas fluorinated dihydrooxazines were prepared in much better yields by ball-milling.

Solvent-Minimized Synthesis of 4CzIPN and Related Organic Fluorophores via Ball Milling.

The mechanochemical synthesis of 2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile and related organic fluorophores/photocatalysts via a solvent-minimized four-fold SNAr pathway is herein described. Employing sodium tert-butoxide as base, and negating the need for any air/moisture-sensitive reaction set-ups, a selection of organic dyes was synthesized in just 1 h using this ball-milling technique. Furthermore, the transformation was then showcased on a multigram scale.

Continuous Flow Z-Stereoselective Olefin Metathesis: Development and Applications in the Synthesis of Pheromones and Macrocyclic Odorant Molecules*.

The first continuous flow Z-selective olefin metathesis process is reported. Key to realizing this process was the adequate choice of stereoselective catalysts combined with the design of an appropriate continuous reactor setup. The designed continuous process permits various self-, cross- and macro-ring-closing-metathesis reactions, delivering products in high selectivity and short residence times. This technique is exemplified by direct application to the preparation of a range of pheromones and macrocyclic odorant molecules and culminates in a telescoped Z-selective cross-metathesis/ Dieckmann cyclisation sequence to access (Z)-Civetone, incorporating a serial array of continually stirred tank reactors.