RESUMO
To produce clothes made with engineered fabrics to monitor the physiological parameters of workers, strain sensors were produced by depositing two different types of water-based inks (P1 and P2) suitably mixed with graphene nanoplatelets (GNPs) on a fabric. We evaluated the biocompatibility of fabrics with GNPs (GNP fabric) through in vitro and in vivo assays. We investigated the effects induced on human keratinocytes by the eluates extracted from GNP fabrics by the contact of GNP fabrics with cells and by seeding keratinocytes directly onto the GNP fabrics using a cell viability test and morphological analysis. Moreover, we evaluated in vivo possible adverse effects of the GNPs using the model system Caenorhabditis elegans. Cell viability assay, morphological analysis and Caenorhabditis elegans tests performed on smart fabric treated with P2 (P2GNP fabric) did not show significant differences when compared with their respective control samples. Instead, a reduction in cell viability and changes in the membrane microvilli structure were found in cells incubated with smart fabric treated with P1. The results were helpful in determining the non-toxic properties of the P2GNP fabric. In the future, therefore, graphene-based ink integrated into elastic fabric will be developed for piezoresistive sensors.
RESUMO
BACKGROUND: Several data have demonstrated the occurrence of erosive arthritis in Systemic Lupus Erythematosus (SLE) patients. However, a few studies have focused on the pathogenic mechanisms involved in this feature. The implication of oral pathogens has been proved in Rheumatoid Arthritis: in particular, Porphyromonas gingivalis (Pg), by inducing citrullination, could trigger autoimmune response. Here, we evaluated amount of Pg on the tongue in a cohort of SLE patients with arthritis, focusing on the association with the erosive phenotype. METHODS: SLE patients with arthritis were enrolled. DAS28 was applied to assess activity. Erosive damage was evaluated by ultrasound at level of MCP (metacarpophalangeal) and PIP (proximal interphalangeals) joints. All subjects underwent a tongue cytologic swab in order to quantify the amount of Pg (real-time PCR). The bacterium expression was obtained from the ratio between the patient's DNA amount and that obtained from healthy subjects. RESULTS: 33 patients were enrolled (M/F 3/30; median age 47 years, IQR 17; median disease duration 216 months, IQR 180): 12 of them (36.4%) showed erosive damage, significantly associated with ACPA positivity (p = 0.03) and higher values of DAS28 (p = 0.01). A mean ratio of 19.7 ± 31.1 was found for Pg amount. Therefore, we used Pg mean values as threshold, identifying two groups of patients, namely, highPg and lowPg. Erosive damage was significantly more frequent in highPg patients in comparison with lowPg (60.0% vs 26.0%, p = 0.001). Furthermore, highPg patients showed higher prevalence of skin manifestations, serositis, and neurological involvement (p = 0.005, p = 0.03, p = 0.0001, respectively). CONCLUSION: The possible contribution of oral microbiota in SLE erosive arthritis was here evaluated for the first time, finding a significant association between erosive damage and higher expression of Pg at tongue level.
Assuntos
Artrite Reumatoide , Lúpus Eritematoso Sistêmico , Autoanticorpos , Biofilmes , Humanos , Porphyromonas gingivalis , Língua/patologiaRESUMO
Calcium silicate-based cements have reached excellent levels of performance in endodontics, providing predictable and successful results. To better assess the properties of these bioactive materials, the present study aimed to compare the biocompatibility and antibiofilm properties of ProRoot MTA and Biodentine. Human osteogenic sarcoma (Saos-2) cells were cultured on ProRoot MTA and Biodentine samples or in the presence of both cement extracts. Cell viability assay, measurement of reactive oxygen species (ROS), immunofluorescence analysis, as well as morphological evaluations were conducted. Moreover, Streptococcus mutans was used to assess the biofilm forming ability on ProRoot MTA and Biodentine disks. Finally, both cements were applied in vivo to treat immature permanent teeth affected by reversible pulpitis. Results: Cell viability assay demonstrated that Saos-2 cells had a dose- and time-dependent cytotoxicity to both analyzed cements, although cells exposed to ProRoot MTA showed a better cell vitality than those exposed to Biodentine (p < 0.001). Both cements demonstrated ROS production while this was greater in the case of Biodentine than ProRoot MTA (p < 0.001). Immunofluorescence images of the cytoskeleton and focal adhesions showed no differences in Saos-2 cells grown in the presence of ProRoot MTA eluate; whereas in the Biodentine groups, cells showed a morphology and focal adhesions more similar to that of the control sample, as the eluate concentration decreased. Morphological analysis revealed that Saos-2 cells were more flattened and exhibited better spreading when attached to ProRoot MTA disks than to Biodentine ones. The antibiofilm properties showed a time-dependent powerful inhibition of S. mutans superficial colonization and an antibiofilm effect of both cements. Clinically, complete root formation of the treated elements was achieved using the two studied cements, showing stable results over time. ProRoot MTA and Biodentine was demonstrated to be biocompatible and to possess antibiofilm properties. Their clinical application in vital pulp therapy provided successful outcomes after 2 years of follow-up.
RESUMO
An intensive study, applied to a site characterized by multiple sources of microorganisms, was aimed at understanding the best approach to study bioaerosol. Culture-based, molecular biological, and chemical methods were applied to Particulate Matter (PM) samples collected in a livestock facility, during spring and autumn seasons, in two different outdoor areas. The first one was close to a place where feed was stored and handled and the second next to an open cowshed. Qualitative analysis of bacteria was performed by sequencing techniques applied to DNA extracted from both isolated culturable bacteria and particulate matter samples. Quantification of microorganisms was achieved through three distinct approaches. Microorganism colonies were counted, after incubation at 28 °C, and expressed as colony-forming units (CFU) per m3. Chemical method consisted in the identification of individual biomarkers, and their conversion to number of microorganisms per m3, using proper conversion factors. Finally, qPCR was applied to DNA extracted from PM samples, and the results were expressed as total amount of bacteria present in the bioaerosol (UG/m3). The presence of airborne sterols was also studied to broaden the knowledge of bioaerosol components in atmosphere. Small seasonal differences and major sampling site differences occurred. Obviously, culture-dependent method identified less and different bacteria, than culture-independent approach. The chemical approach and the culture independent metagenomic method were in good agreement. As expected, CFU/m3 accounted for not more than 0.3% of bacteria calculated as the average of chemical and culture independent metagenomic methods. The complexity of the obtained results shows that the different approaches are complementary to obtain an exhaustive description of bioaresol in terms of concentration, speciation, viability, pathogenicity.
Assuntos
Microbiologia do Ar , Gado , Aerossóis/análise , Animais , Monitoramento Ambiental , Material Particulado/análiseRESUMO
Dental implants are one of the most commonly used ways to replace missing teeth. Nevertheless, the close contact with hard and soft oral tissues expose these devices to infectious peri-implant diseases. To prevent such infection, several surface treatments have been developed in the last few years to improve the antimicrobial properties of titanium dental implants. In this in-vitro pilot study, the antimicrobial activity of titanium surfaces coated with different types of graphene nanoplatelets are investigated. Six different colloidal suspensions of graphene nanoplatelets (GNPs) were produced from graphite intercalated compounds, setting the temperature and duration of the thermal shock and varying the number of the exfoliation cycles. Titanium disks with sand-blasted and acid-etched surfaces were sprayed with 2 mL of colloidal GNPs suspensions. The size of the GNPs and the percentage of titanium disk surfaces coated by GNPs were evaluated through a field emission-scanning electron microscope. The antibacterial activity of the specimens against Staphylococcus aureus was estimated using a crystal violet assay. The dimension of GNPs decreased progressively after each sonication cycle. The two best mean percentages of titanium disk surfaces coated by GNPs were GNPs1050°/2 and GNPs1150°/2. The reduction of biofilm development was 14.4% in GNPs1150°/2, 20.1% in GNPs1150°/3, 30.3% in GNPs1050°/3, and 39.2% in GNPs1050°/2. The results of the study suggested that the surface treatment of titanium disks with GNPs represents a promising solution to improve the antibacterial activity of titanium implants.
Assuntos
Antibacterianos , Grafite , Nanopartículas , Peri-Implantite , Titânio , Antibacterianos/administração & dosagem , Humanos , Nanopartículas/administração & dosagem , Peri-Implantite/microbiologia , Peri-Implantite/prevenção & controle , Projetos Piloto , Infecções Estafilocócicas/prevenção & controle , Staphylococcus aureus , Propriedades de SuperfícieRESUMO
BACKGROUND: Dental caries is a recognized worldwide public health problem. Despite being one of the most effective strategies against dental caries, the excessive use of fluorine may result in a potential risk of developing dental fluorosis especially in children under age of six. The purpose of this work is to analyze a fluorine-free toothpaste containing Biomimetic Hydroxyapatite to assess enamel re-mineralizing and repairing properties. RESULTS: The study was performed in vitro and in vivo, comparing the hydroxyapatite toothpaste with two others toothpaste containing different fluorine concentrations. The coating effect of the micro-structured Hydroxyapatite nanoparticles reintegrates the enamel with a biomimetic film reproducing the structure and the morphology of the biologic Hydroxyapatite of the enamel. As demonstrated, the coating is due to the deposit of a new layer of apatite, which presents fewer particles than the natural enamel, not based on the chemical-physical changes occurring in fluorinated toothpastes. Moreover, it shows resistance to brushing as a consequence of chemical bonds between the synthetic and natural crystals of the enamel. CONCLUSIONS: The use of Biomimetic Hydroxyapatite toothpastes has proven to be a valuable prevention measure against dental caries in primary dentition since it prevents the risk of fluorosis.
Assuntos
Biomimética , Esmalte Dentário/efeitos dos fármacos , Durapatita/farmacologia , Remineralização Dentária/métodos , Criança , Materiais Revestidos Biocompatíveis/química , Cárie Dentária/prevenção & controle , Esmalte Dentário/patologia , Durapatita/química , Fluoretos/farmacologia , Humanos , Streptococcus mutans/efeitos dos fármacos , Dente Decíduo , Cremes Dentais/química , Cremes Dentais/farmacologiaRESUMO
Wastewater carries different pathogenic and non-pathogenic microorganisms that can be dispersed in the surrounding environment. Workers who frequent sewage treatment plants can therefore be exposed to aerosols that contain a high concentration of potentially dangerous biological agents, or they can come into direct contact with contaminated material. This can lead to allergies, infections and occupational health-associated diseases. A characterization of biological risk assessment of bioaerosol exposure is necessary. The aim of this study was to evaluate the application of an interdisciplinary method that combines chemical and biological approaches for the analysis of a bioaerosol derived from a wastewater treatment plant (WWTP) situated in Italy. Sampled filters were analyzed by HPLC-MS/MS spectroscopy that searched for different chemical biomarkers of airborne microorganisms. The analytical quantification was compared to the biological cultural method that revealed an underrated microbial concentration. Furthermore, next generation sequencing analysis was used also to identify the uncultivable species that were not detected by the culture dependent-method. Moreover, the simple animal model Caenorhabditis elegans was used to evaluate the pathogenicity of two isolates-Acinetobacter iwoffii and Micrococcus luteus-that showed multidrug-resistance. This work represents a starting point for the development of a multidisciplinary approach for the validation of bioaerosol exposure on WWTP workplaces.
Assuntos
Aerossóis/química , Microbiologia do Ar , Bactérias/isolamento & purificação , Cromatografia Líquida , Instalações de Eliminação de Resíduos , Águas Residuárias/microbiologia , Humanos , Itália , Exposição Ocupacional/análise , Medição de Risco , Espectrometria de Massas em Tandem , Local de TrabalhoRESUMO
BACKGROUND: Nanotechnologies are currently revolutionizing the world around us, improving the quality of our lives thanks to a multitude of applications in several areas including the environmental preservation, with the biodeterioration phenomenon representing one of the major concerns. RESULTS: In this study, an innovative nanomaterial consisting of graphene nanoplatelets decorated by zinc oxide nanorods (ZNGs) was tested for the ability to inhibit two different pathogens belonging to bacterial genera frequently associated with nosocomial infections as well as biodeterioration phenomenon: the Gram-positive Staphylococcus aureus and the Gram-negative Pseudomonas aeruginosa. A time- and dose-dependent bactericidal effect in cell viability was highlighted against both bacteria, demonstrating a strong antimicrobial potential of ZNGs. Furthermore, the analysis of bacterial surfaces through Field emission scanning electron microscopy (FESEM) revealed ZNGs mechanical interaction at cell wall level. ZNGs induced in those bacteria deep physical damages not compatible with life as a result of nanoneedle-like action of this nanomaterial together with its nanoblade effect. Cell injuries were confirmed by Fourier transform infrared spectroscopy, revealing that ZNGs antimicrobial effect was related to protein and phospholipid changes as well as a decrease in extracellular polymeric substances; this was also supported by a reduction in biofilm formation of both bacteria. The antibacterial properties of ZNGs applied on building-related materials make them a promising tool for the conservation of indoor/outdoor surfaces. Finally, ZNGs nanotoxicity was assessed in vivo by exploiting the soil free living nematode Caenorhabditis elegans. Notably, no harmful effects of ZNGs on larval development, lifespan, fertility as well as neuromuscular functionality were highlighted in this excellent model for environmental nanotoxicology. CONCLUSIONS: Overall, ZNGs represent a promising candidate for developing biocompatible materials that can be exploitable in antimicrobial applications without releasing toxic compounds, harmful to the environment.