Primary Total Shoulder Arthroplasty is Superior to Hemiarthroplasty for the Treatment of Glenohumeral Arthritis: Analysis of 5-year Outcomes in a Large Surgical Database.

Background: Total shoulder arthroplasty (TSA) is the preferred treatment for glenohumeral arthritis refractory to nonoperative measures. However, some surgeons have argued for a role for hemiarthroplasty (HA) in the setting of a smooth glenoid that articulates appropriately with the humeral head. The purpose of this study is to evaluate long-term revision rates and short-term postoperative complications in patients undergoing either HA or TSA for glenohumeral arthritis. Methods: A retrospective review of patients who underwent HA and TSA was conducted using a commercially available national database. Demographics, postoperative complications, risk factors, revision rates, and costs were analyzed using 2 sample t-tests, chi-squared tests, and multivariate logistic regressions. Results: Patients were stratified by operation: (1) HA (n = 1615) or 2) TSA (n = 7845). Patients undergoing primary TSA had higher rates of prior ipsilateral rotator cuff repair and corticosteroid injections. At 2 years, patients who underwent HA, 3.0% of patients had revision surgery, compared to 1.6% of patients who underwent TSA (P = .002); at 5 years, 3.7% of the HA cohort (P < .0001) had revision surgery, compared to 1.9% of patients who underwent TSA. Conclusions: Patients undergoing TSA or RTSA for glenohumeral arthritis had higher preoperative co-morbidities but had no difference in short-term complication rates with a lower risk of revision surgery at both 2-year and 5-year follow-up when compared to HA. Increasing age, female sex, hyperlipidemia, postoperative infection, shoulder instability, and thromboembolism all independently increased odds for revision shoulder arthroplasty for glenohumeral arthritis. Level of evidence Level: III.

The Biomechanical Role of the Deltoid Ligament on Ankle Stability: Injury, Repair, and Augmentation.

BACKGROUND: Deltoid ligament injuries occur in isolation as well as with ankle fractures and other ligament injuries. Both operative treatment and nonoperative treatment are used, but debate on optimal treatment continues. Likewise, the best method of surgical repair of the deltoid ligament remains unclear. PURPOSE: To determine the biomechanical role of native anterior and posterior components of the deltoid ligament in ankle stability and to determine the efficacy of simple suture versus augmented repair. STUDY DESIGN: Controlled laboratory study. METHODS: Ten cadaveric ankles (mean age, 51 years; age range, 34-64 years; all male specimens) were mounted on a 6 degrees of freedom robotic arm. Each specimen underwent biomechanical testing in 8 states: (1) intact, (2) anterior deltoid cut, (3) anterior repair, (4) tibiocalcaneal augmentation, (5) deep anterior tibiotalar augmentation, (6) posterior deltoid cut, (7) posterior repair, and (8) complete deltoid cut. Testing consisted of anterior drawer, eversion, and external rotation (ER), each performed at neutral and 25° of plantarflexion. A 1-factor, random-intercepts, linear mixed-effect model was created, and all pairwise comparisons were made between testing states. RESULTS: Cutting the anterior deltoid introduced ER (+2.1°; P = .009) and eversion laxity (+6.2° of eversion; P < .001) at 25 degrees of plantarflexion. Anterior deltoid repair restored native ER but not eversion. Tibiocalcaneal augmentation reduced eversion laxity, but tibiotalar augmentation provided no additional benefit. The posterior deltoid tear showed no increase in laxity. Complete tear introduced significant anterior translation, ER, and eversion laxity (+7.6 mm of anterior translation, +13.8° ER and +33.6° of eversion; P < .001). CONCLUSION: A complete deltoid tear caused severe instability of the ankle joint. Augmented anterior repair was sufficient to stabilize the complete tear, and no additional benefit was provided by posterior repair. For isolated anterior tear, repair with tibiocalcaneal augmentation was the optimal treatment. CLINICAL RELEVANCE: Deltoid repair with augmentation may reduce or avoid the need for prolonged postoperative immobilization and encourage accelerated rehabilitation, preventing stiffness and promoting earlier return to preinjury activity.

Biomechanical Analysis of Tibial Motion and ACL Graft Forces After ACLR With and Without LET at Varying Tibial Slopes.

BACKGROUND: Lateral extra-articular tenodesis (LET) is being performed more frequently with anterior cruciate ligament (ACL) reconstruction (ACLR) to decrease graft failure rates. The posterior tibial slope (PTS) affects ACL graft failure rates. The effect of ACLR + LET on tibial motion and graft forces with increasing PTS has not been elucidated. HYPOTHESIS: LET would decrease anterior tibial translation (ATT), tibial rotation, and ACL graft force versus ACLR alone with increasing tibial slope throughout knee range of motion. STUDY DESIGN: Controlled laboratory study. METHODS: Twelve fresh-frozen cadaveric knees (mean donor age, 40.5 years; all female) were tested in 4 conditions (intact, ACL cut, ACLR, and ACLR + LET) with varying PTSs (5°, 10°, 15°, and 20°) at 3 flexion angles (0°, 30°, and 60°). Specimens were mounted to a load frame that applied a 500-N axial load with 1 N·m of internal rotation (IR) torque. The amount of tibial translation, IR, and graft force was measured. RESULTS: Increasing PTS revealed a linear and significant increase in graft force at all flexion angles. LET reduced graft force by 8.3% (-5.8 N) compared with ACLR alone at 30° of flexion. At the same position, slope reduction resulted in reduced graft force by 17% to 22% (-12.3 to -15.2 N) per 5° of slope correction, with a 46% (-40.7 N) reduction seen from 20° to 5° of slope correction. For ATT, ACLR returned tibial translation to preinjury levels, as did ACLR + LET at all flexion angles, except full extension, where ACLR + LET reduced ATT by 2.5 mm compared with the intact state (P = .019). CONCLUSION: Increased PTS was confirmed to increase graft forces linearly. Although ACLR + LET reduced graft force compared with ACLR alone, slope reduction had a larger effect across all testing conditions. No other clinically significant differences were noted between ACLR with versus without LET in regard to graft force, ATT, or IR. CLINICAL RELEVANCE: Many authors have proposed LET in the setting of ACLR, revision surgery, hyperlaxity, high-grade pivot shift, and elevated PTS, but the indications remain unclear. The biomechanical performance of ACLR + LET at varying PTSs may affect daily practice and provide clarity on these indications.

Reanalysis of the Posterior Oblique Ligament: Quantitative Anatomy, Radiographic Markers, and Biomechanical Properties.

Background: The posterior oblique ligament (POL) is the largest structure of the posteromedial knee that is at risk of injury in conjunction with the medial collateral ligament (MCL). Its quantitative anatomy, biomechanical strength, and radiographic location have not been assessed in a single investigation. Purpose: To evaluate the 3-dimensional and radiographic anatomy of the posteromedial knee and the biomechanical strength of the POL. Study Design: Descriptive laboratory study. Methods: Ten nonpaired fresh-frozen cadaveric knees were dissected and medial structures were elevated off bone, leaving the POL. The anatomic locations of the related structures were recorded with a 3-dimensional coordinate measuring machine. Anteroposterior and lateral radiographs were taken with radiopaque pins inserted into the pertinent landmarks, and the distances between the collected structures were calculated. Each knee was then mounted to a dynamic tensile testing machine, and pull-to-failure testing was performed to record the ultimate tensile strength, stiffness, and failure mechanism. Results: The POL femoral attachment was a mean of 15.4 mm (95% CI, 13.9-16.8 mm) posterior and 6.6 mm (95% CI, 4.4-8.8 mm) proximal to the medial epicondyle. The tibial POL attachment center was a mean of 21.4 mm (95% CI, 18.1-24.6 mm) posterior and 2.2 mm (95% CI, 0.8-3.6 mm) distal to the center of the deep MCL tibial attachment and a mean of 28.6 mm (95% CI, 24.4-32.8 mm) posterior and 41.9 mm (95% CI, 36.8-47.0 mm) proximal to the center of the superficial MCL tibial attachment. On lateral radiographs, the femoral POL was a mean of 17.56 mm (95% CI, 14.83-21.95 mm) distal to the adductor tubercle and 17.32 mm (95% CI, 14.6-21.7 mm) posterosuperior to the medial epicondyle. On the tibial side, the center of the POL attachment was a mean of 4.97 mm (95% CI, 3.85-6.79 mm) distal to the joint line on anteroposterior radiographs and 6.34 mm (95% CI, 5.01-8.48 mm) distal to the tibial joint line on lateral radiographs, at the far posterior tibial aspect. The biomechanical pull-to-failure demonstrated a mean ultimate tensile strength of 225.2 ± 71.0 N and a mean stiffness of 32.2 ± 13.1 N. Conclusion: The anatomic and radiographic locations of the POL and its biomechanical properties were successfully recorded. Clinical Relevance: This information is useful to better understand POL anatomy and biomechanical properties as well as to clinically address an injury with repair or reconstruction.

Effect of Posterior Malleolar Fixation on Syndesmotic Stability.

BACKGROUND: Transsyndesmotic fixation with suture buttons (SBs), posterior malleolar fixation with screws, and anterior inferior tibiofibular ligament (AITFL) augmentation using suture tape (ST) have all been suggested as potential treatments in the setting of a posterior malleolar fracture (PMF). However, there is no consensus on the optimal treatment for PMFs. PURPOSE: To determine which combination of (1) transsyndesmotic SBs, (2) posterior malleolar screws, and (3) AITFL augmentation using ST best restored native tibiofibular and ankle joint kinematics after 25% and 50% PMF. STUDY DESIGN: Controlled laboratory study. METHODS: Twenty cadaveric lower-leg specimens were divided into 2 groups (25% or 50% PMF) and underwent biomechanical testing using a 6 degrees of freedom robotic arm in 7 states: intact, syndesmosis injury with PMF, transsyndesmotic SBs, transsyndesmotic SBs + AITFL augmentation, transsyndesmotic SBs + AITFL augmentation + posterior malleolar screws, posterior malleolar screws + AITFL augmentation, and posterior malleolar screws. Four biomechanical tests were performed at neutral and 30° of plantarflexion: external rotation, internal rotation, posterior drawer, and lateral drawer. The position of the tibia, fibula, and talus were recorded using a 5-camera motion capture system. RESULTS: With external rotation, posterior malleolar screws with AITFL augmentation resulted in best stability of the fibula and ankle joint. With internal rotation, all repairs that included posterior malleolar screws stabilized the fibula and ankle joint. Posterior and lateral drawer resulted in only small differences between the intact and injured states. No differences were found in the efficacy of treatments between 25% and 50% PMFs. CONCLUSION: Posterior malleolar screws resulted in higher syndesmotic stability when compared with transsyndesmotic SBs. AITFL augmentation provided additional external rotational stability when combined with posterior malleolar screws. Transsyndesmotic SBs did not provide any additional stability and tended to translate the fibula medially. CLINICAL RELEVANCE: Posterior malleolar fixation with AITFL augmentation using ST may be the preferred surgical method when treating patients with acute ankle injury involving an unstable syndesmosis and a PMF ≥25%.

Anterior to Posterior Bone Plug Suture Tunnels Provide Optimal Biomechanics for Bone-Patellar Tendon-Bone Anterior Cruciate Ligament Graft.

Purpose: To evaluate different bone-patellar tendon-bone (BPTB) plug suture configurations for pull through strength, stiffness, and elongation at failure in a biomechanical model of suspensory fixation. Methods: Forty nonpaired, fresh-frozen human cadaveric BPTB allografts with an average age of 65.6 years were tested. Tensile testing was performed with the use of a custom-designed fixture mounted in a dynamic tensile testing machine. A preload of 90 N was applied to the graft and held for 5 minutes. Following this, a tensile load-to-failure test was performed. The ultimate failure load, elongation at failure, and mode of failure were recorded, and the resulting load-elongation curve was documented. Results: The drill tunnel through the cortical surface (anterior to posterior) was found to be significantly stronger than the drill tunnel through the cancellous surface (medial to lateral). There were no significant differences found when comparing the strength of the suture augmentation through the tendon and the drill tunnel alone (P = .13 among cancellous groups, P = .09 among cortical groups). The cortical drill tunnel with suture augmentation through the tendon showed significantly greater elongation values (13.7 ± 3.2) at failure when compared with either the cancellous or cortical drill tunnel only test groups (P = .0003 compared with cancellous alone, P = .009 when compared with cortical alone). Conclusions: The BPTB suture configuration with an anterior to posterior-directed suture tunnel without a suture through tendon augmentation provides the optimal strength and stiffness while minimizing graft elongation after fixation in a biomechanical model. This configuration is best for preventing suture pull through and failure when passing sutures through the BPTB plug. Clinical Relevance: This study biomechanically evaluates the optimal suture configuration in the proximal bone plug for suspensory fixation in the setting of BPTB grafts.

A new understanding of radiographic landmarks of the greater trochanter that indicate correct femoral rotation for measurement of femoral offset.

OBJECTIVES: To establish and validate a novel method for aligning femoral rotation to accurately measure femoral offset for preoperative templating and component sizing, and to identify the physical location of two radiographic lines utilized in the described method. MATERIALS AND METHODS: Cadaveric proximal femurs were skeletonized and mounted to a biaxial load frame. Two radiographic lines along the greater trochanter were identified fluoroscopically. The femurs were rotated, and images were taken when the lines appeared superimposed, then in 2-degree increments to 10° of internal and external rotation, and at 30°. Radiographic femoral offset was calculated at each angle, and the maximum and aligned offsets were compared. Bone was removed until the radiographic lines disappeared, then a metal wire was inserted in place of the bone to confirm that the lines reappeared. RESULTS: The physical locations of the radiographic landmarks were on the anterior and posterior aspects of the greater trochanter. The mean true femoral offset was 38.2 mm (range, 30.5-46.3 mm). The mean aligned femoral offset was 37.3 mm (range, 29.3-46.3 mm), a 2.4% underestimation. The mean angle between aligned and true offset was 3.6° of external rotation (range, 10°ER-8°IR). Intra-rater intraclass correlation coefficient was 0.991. CONCLUSION: Alignment of the radiographic lines created by the anterior and posterior aspects of the greater trochanter is a reliable and accurate rotational positioning method for measuring true femoral offset when using plain films or fluoroscopy, which can aid surgeons with preoperative templating and intraoperative component placement for total hip arthroplasty.

Biomechanical Evaluation of 4 Suture Techniques for Hip Capsular Closure.

Background: The most reliable suture technique for capsular closure after a capsulotomy remains unknown. Purpose: To determine which suture technique best restores native stability after a 5-cm interportal capsulotomy. Study Design: Controlled laboratory study. Methods: Ten human cadaveric hip specimens were tested using a 6-degrees-of-freedom robotic arm in 7 states: intact, capsular laxity, 5-cm capsulotomy, standard suture, shoelace, double shoelace, and Quebec City slider (QCS). Rotational range of motion (ROM) was measured across 9 tests: flexion, extension, abduction, abduction at 45° of flexion, adduction, external rotation, internal rotation, anterior impingement, and log roll. Distraction (ie, femoral head translation [FHT]) was measured across a range of flexion and abduction angles. Results: When compared with the native state, the 5-cm capsulotomy state showed the largest laxity increases on all tests, specifically in external rotation ROM (+13.4°), extension ROM (+11.5°), and distraction FHT (+4.5 mm) (P < .001 for all). The standard suture technique was not significantly different from the 5-cm capsulotomy on any test and demonstrated significantly more flexion ROM than the double shoelace suture (+1.41°; P = .049) and more extension ROM (+5.51°; P = .014) and external rotation ROM (+6.03°; P = .021) than the QCS. The standard suture also resulted in significantly higher distraction FHT as compared with the shoelace suture (+1.0 mm; P = .005), double shoelace suture (+1.4 mm; P < .001), and QCS (+1.1 mm; P = .003). The shoelace, double shoelace, and QCS techniques significantly reduced hip laxity when compared with the 5-cm capsulotomy state, specifically in external rotation ROM (respectively, -8.1°, -7.8°, and -10.2°), extension ROM (-6.3°, -7.3°, and -8.1°), and distraction FHT (-1.8, -2.2, and -1.9 mm) (P ≤ .003 for all). These 3 techniques restored native stability (no significant difference from intact) on some but not all tests, and no significant differences were observed among them on any test. Conclusion: Hip capsule closure with the standard suture technique did not prevent postoperative hip instability after a 5-cm capsulotomy, and 3 suture techniques were found to be preferable; however, none perfectly restored native stability at time zero. Clinical Relevance: The shoelace, double shoelace, and QCS suture techniques are recommended when closing the hip capsule.

Brown Fat Promotes Muscle Growth During Regeneration.

Accumulation of adipose tissue around and within muscles is highly correlated with reduced strength, functional limitations, and poor rehabilitative outcomes. Given the intimate physical contact between these tissues, paracrine cross-talk is a likely mediator of this association. The recent discovery that muscle-associated adipose tissue exhibits features of beige fat has suggested that this cross-talk may be modifiable, as beige fat can be stimulated to assume features of brown fat. In this work, we describe a novel intermuscular fat transplant model in the mouse rotator cuff to investigate cross-talk between muscle and adipose tissue. Specifically, we examine the role of transplanted fat phenotype on muscle regeneration by transplanting pieces of classical brown (interscapular), beige (inguinal), or white (epididymal) adipose tissue in conjunction with cardiotoxin injection to the adjacent supraspinatus muscle. Transplantation of brown fat, but not beige or white, significantly increased muscle mass, fiber cross-sectional area and contractile force production compared with sham injury. This effect was not seen when cardiotoxin was delivered to a distant muscle, or when adjacent muscles were injected with saline indicating that the effect is localized and specifically targeting the regenerative process. Thus, we conclude that local signaling between fat and muscle varies by phenotype and that brown fat supports regeneration. Clinical significance: Our findings suggest that the phenotype of muscle-associated fat could be a novel therapeutic target to modulate fat-muscle signaling. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1817-1826, 2019.