A cohort study of retinal detachment among Swedish construction workers.

OBJECTIVE: Retinal detachment (RD) has been associated with exposure to heavy lifting. Many occupations within the construction industry are likely to involve lifting tasks. We investigated the association between occupational heavy lifting and rhegmatogenous RD in a retrospective cohort study of Swedish construction workers. METHODS: We studied Swedish construction workers who participated in an industry-wide health and safety program from 1971 to 1993. Individual occupation codes were linked to a job exposure matrix, assigning intensity of exposure to heavy lifting to each worker. The Swedish National Patient Register was used to identify cases of RD that occurred during follow-up through the end of 2012. We used Poisson regression modeling to calculate incidence rates of RD associated with heavy lifting, age and other covariates. A subcohort of those age ≤25 years at enrollment was studied to reduce bias from missing exposure information from work prior to enrollment. RESULTS: Of 256 241 construction workers, 17% were classified with high exposure to heavy lifting in their occupation. Within the cohort, 1588 cases of RD were identified. Average exposure intensity of heavy lifting was not associated with risk of RD. However, RD risk increased with increasing cumulative exposure to heavy lifting, both in the full cohort and subcohort of those who were ≤25 years old at entry into the construction-worker cohort. CONCLUSION: Construction workers' risk of RD appeared to increase with time spent exposed to heavy lifting.

Underscoring the effect of swab type, workflow, and positive sample order on swab pooling for COVID-19 surveillance testing.

Sample pooling is a promising strategy to facilitate COVID-19 surveillance testing for a larger population in comparison to individual single testing due to resource and time constraints. Increased surveillance testing capacity will reduce the likelihood of outbreaks as the general population is returning to work, school, and other gatherings. We have analyzed the impact of three variables on the effectiveness of pooling test samples: swab type, workflow, and positive sample order. We investigated the performance of several commercially available swabs (Steripack polyester flocked, Puritan nylon flocked, Puritan foam) in comparison to a new injected molded design (Yukon). The bench-top performance of collection swab was conducted with a previously developed anterior nasal cavity tissue model, based on a silk-glycerol sponge to mimic soft tissue mechanics and saturated with a physiologically relevant synthetic nasal fluid spiked with heat-inactivated SARS-CoV-2. Overall, we demonstrated statistically significant differences in performance across the different swab types. A characterization of individual swab uptake (gravimetric analysis) and FITC microparticle release suggests that differences in absorbance and retention drive the observed differences in Ct of the pooled samples. We also proposed two distinct pooling workflows to encompass different community collection modes and analyzed the difference in resulting positive pools as an effect of workflow, swab type, and positive sample order. Overall, swab types with lower volume retention resulted in reduced false negative occurrence, also observed for collection workflows with limited incubation times. Concurrently, positive sample order did have a significant impact on pooling test outcome, particularly in the case of swab type with great volume retention. We demonstrated that the variables investigated here affect the results of pooled COVID-19 testing, and therefore should be considered while designing pooled surveillance testing.

COVID-19: a gray swan's impact on the adoption of novel medical technologies.

The COVID-19 pandemic offers a unique context and opportunity to investigate changes in healthcare professional perceptions towards the adoption of novel medical technologies, such as point-of-care technologies (POCTs). POCTs are a nascent technology that has experienced rapid growth as a result of COVID-19 due to their ability to increase healthcare accessibility via near-patient delivery, including at-home. We surveyed healthcare professionals before and during COVID-19 to explore whether the pandemic altered their perceptions about the usefulness of POCTs. Our network analysis method provided a structure for understanding this changing phenomenon. We uncovered that POCTs are not only useful for diagnosing COVID-19, but healthcare professionals also perceive them as increasingly important for diagnosing other diseases, such as cardiovascular, endocrine, respiratory, and metabolic diseases. Healthcare professionals also viewed POCTs as facilitating the humanization of epidemiology by improving disease management/monitoring and strengthening the clinician-patient relationship. As the accuracy and integration of these technologies into mainstream healthcare delivery improves, hurdles to their adoption dissipate, thereby encouraging healthcare professionals to rely upon them more frequently to diagnose, manage, and monitor diseases. The technological advances made in POCTs during COVID-19, combined with shifting positive perceptions of their utility by healthcare professionals, may better prepare us for the next pandemic.

In Vitro Nasal Tissue Model for the Validation of Nasopharyngeal and Midturbinate Swabs for SARS-CoV-2 Testing.

Large-scale population testing is a key tool to mitigate the spread of respiratory pathogens, such as the current COVID-19 pandemic, where swabs are used to collect samples in the upper airways (e.g., nasopharyngeal and midturbinate nasal cavities) for diagnostics. However, the high volume of supplies required to achieve large-scale population testing has posed unprecedented challenges for swab manufacturing and distribution, resulting in a global shortage that has heavily impacted testing capacity worldwide and prompted the development of new swabs suitable for large-scale production. Newly designed swabs require rigorous preclinical and clinical validation studies that are costly and time-consuming (i.e., months to years long); reducing the risks associated with swab validation is therefore paramount for their rapid deployment. To address these shortages, we developed a 3D-printed tissue model that mimics the nasopharyngeal and midturbinate nasal cavities, and we validated its use as a new tool to rapidly test swab performance. In addition to the nasal architecture, the tissue model mimics the soft nasal tissue with a silk-based sponge lining, and the physiological nasal fluid with asymptomatic and symptomatic viscosities of synthetic mucus. We performed several assays comparing standard flocked and injection-molded swabs. We quantified the swab pickup and release and determined the effect of viral load and mucus viscosity on swab efficacy by spiking the synthetic mucus with heat-inactivated SARS-CoV-2 virus. By molecular assay, we found that injected molded swabs performed similarly or superiorly in comparison to standard flocked swabs, and we underscored a viscosity-dependent difference in cycle threshold values between the asymptomatic and symptomatic mucuses for both swabs. To conclude, we developed an in vitro nasal tissue model that corroborated previous swab performance data from clinical studies; this model will provide to researchers a clinically relevant, reproducible, safe, and cost-effective validation tool for the rapid development of newly designed swabs.

Preclinical Validation of a Novel Injection-Molded Swab for the Molecular Assay Detection of SARS-CoV-2.

During the COVID-19 public health emergency, many actions have been undertaken to help ensure that patients and health care providers have timely and continued access to high-quality medical devices to respond effectively. The development and validation of new testing supplies and equipment, including collection swabs, has helped to expand the availability and capability for various diagnostic, therapeutic, and protective medical devices in high demand during the COVID-19 emergency. Here, we report the initial validation of a new injection-molded anterior nasal swab, ClearTip™, that was experimentally validated in a laboratory setting as well as in independent clinical studies in comparison to gold standard flocked swabs. We have also developed an in vitro anterior nasal tissue model which offers a novel, efficient, and clinically relevant validation tool to replicate the clinical swabbing workflow with high fidelity, while being accessible, safe, reproducible, and time- and cost-effective. ClearTip™ displayed greater inactivated virus release in the benchtop model, confirmed by its greater ability to report positive samples in a small clinical study in comparison to flocked swabs. We also quantified the detection of biological materials, as a proxy for viral material, in multi-center pre-clinical and clinical studies which showed a statistically significant difference in one study and a reduction in performance in comparison to flocked swabs. Taken together, these results emphasize the compelling benefits of non-absorbent injection-molded anterior nasal swabs for COVID-19 detection, comparable to standard flocked swabs. Injection-molded swabs, as ClearTip™, could have the potential to support future swab shortages, due to its manufacturing advantages, while offering benefits in comparison to highly absorbent swabs in terms of comfort, limited volume collection, and potential multiple usage.

In Vitro Nasal Tissue Model for the Validation of Nasopharyngeal and Mid-turbinate Swabs for SARS-CoV-2 Testing.

Large-scale population testing is a key tool to mitigate the spread of respiratory pathogens, as in the current COVID-19 pandemic, where swabs are used to collect samples in the upper airways (e.g. nasopharyngeal and mid-turbinate nasal cavities) for diagnostics. However, the high volume of supplies required to achieve large-scale population testing has posed unprecedented challenges for swab manufacturing and distribution, resulting in a global shortage that has heavily impacted testing capacity world-wide and prompted the development of new swabs suitable for large-scale production. Newly designed swabs require rigorous pre-clinical and clinical validation studies that are costly and time consuming ( i . e . months to years long); reducing the risks associated with swab validation is therefore paramount for their rapid deployment. To address these shortages, we developed a 3D-printed tissue model that mimics the nasopharyngeal and mid-turbinate nasal cavities, and we validated its use as a new tool to rapidly test swab performance. In addition to the nasal architecture, the tissue model mimics the soft nasal tissue with a silk-based sponge lining, and the physiological nasal fluid with asymptomatic and symptomatic viscosities of synthetic mucus. We performed several assays comparing standard flocked and injection-molded swabs. We quantified the swab pick-up and release, and determined the effect of viral load and mucus viscosity on swab efficacy by spiking the synthetic mucus with heat-inactivated SARS-CoV-2 virus. By molecular assays, we found that injected molded swabs performed similarly or superiorly in comparison to standard flocked swabs and we underscored a viscosity-dependent difference in cycle threshold values between the asymptomatic and symptomatic mucus for both swabs. To conclude, we developed an in vitro nasal tissue model, that corroborated previous swab performance data from clinical studies, with the potential of providing researchers with a clinically relevant, reproducible, safe, and cost-effective validation tool for the rapid development of newly designed swabs.

New Opportunities and Cautionary Insights about Decentralizing and Deglobalizing Clinical Trials During the Great Lockdown.

The 2020s began with a rare coronavirus (COVID-19) disaster, which led to a pandemic-induced recession and Great Lockdown. In response, there has been a worldwide mobilization of resources to detect, treat, and cure the virus. Some policymakers are advocating for the repatriation of globally distributed healthcare know-how. Without a cure for COVID-19, the ambiguity concerning how coronavirus-related policies will impact international business remains unclear. Through a multi-method approach, our study sheds light on two key healthcare industry trends: decentralization and deglobalization of clinical trials. We offer actionable strategies to not only mitigate these challenges, but also to take advantage of their new opportunities.