Interactions of hydrology, geochemistry, and biodiversity in woodland ponds located in riverine floodplains: case study from Scotland.

The Gore Glen pond is located in the forested floodplain of the Gore River, in the Mid-Lothian region near Edinburgh, Scotland. This work has considered in detail the hydrology, hydrochemistry, and biodiversity of the pond together with all their interactions and in addition interactions with the adjacent Gore River. It is important as it is one of few studies considering all these issues for a pond located in a riverine floodplain. This work shows the pond is connected to the Gore River for discharge events in the river larger than a 1 in 5-year return period. For these events, the pond acts as an online storage feature and will attenuate the flow, thus contributing towards the mitigation of downstream flooding. These large events are also a potential source of the large amount of sediments, as well as adsorbed chemicals, accumulated in the pond. The open water surface of the pond is covered by duckweed, Lemna minor, for most of the year, and that has profound implications for the hydrobiological community and biogeochemical cycling. The system is characterised by nutrient release from sediments due to the extensive hypolimnion anoxia in the summer/autumn period caused by the decomposition of organic matter. Algae are mostly represented by epiphytic diatoms and the cyanobacterium Microcystis, but their development appears to be constrained by light penetration. The eutrophic conditions are also conducive for the population of Difflugia (Protozoa, Rhizopoda). This work improves our understanding of the ecological relations of testate amoebae-an important group which has recently been used as biological indicators for the analysis of paleoecological relationships and paleogeographical reconstructions.

Mechanical adaptation of brachiopod shells via hydration-induced structural changes.

The function-optimized properties of biominerals arise from the hierarchical organization of primary building blocks. Alteration of properties in response to environmental stresses generally involves time-intensive processes of resorption and reprecipitation of mineral in the underlying organic scaffold. Here, we report that the load-bearing shells of the brachiopod Discinisca tenuis are an exception to this process. These shells can dynamically modulate their mechanical properties in response to a change in environment, switching from hard and stiff when dry to malleable when hydrated within minutes. Using ptychographic X-ray tomography, electron microscopy and spectroscopy, we describe their hierarchical structure and composition as a function of hydration to understand the structural motifs that generate this adaptability. Key is a complementary set of structural modifications, starting with the swelling of an organic matrix on the micron level via nanocrystal reorganization and ending in an intercalation process on the molecular level in response to hydration.

Flood resilience, amenity and biodiversity benefits of an historic urban pond.

The main pond within the historic Royal Botanic Garden Edinburgh is an important component of urban blue-green infrastructure. This paper reports on flood resilience provided by the pond (simulated using the CityCAT hydrodynamic model), its water residence times (obtained using the Shetran hydrological model), and the ecology and biodiversity (vascular plants, bryophytes, aquatic invertebrates, phyto- and zooplankton, birds) of the pond and the adjacent area. The results show that the pond improves the flood resilience with at least a 27% reduction in the peak discharge during a 1 h, one in 100-year event. The area represents a biodiversity hot spot with a range of native taxa occurring among introduced plant species. The plankton community is dominated by diatoms, reflecting elevated levels of turbulence and a relatively short residence time, with an average value of 10 days. Analysis of macroinvertebrate community indicates a potential for water quality improvement. The results are discussed in relation to multiple societal benefits related to flood resilience, recreation, education, water quality, amenity and biodiversity value. The conclusions may prove particularly valuable for introducing practical measures in the water catchment, preventing waterlogging of the soil and ensuring an uninterrupted supply of public services. This article is part of the theme issue 'Urban flood resilience'.

Water versus Asphaltenes; Liquid-Liquid and Solid-Liquid Molecular Interactions Unravel the Mechanisms behind an Improved Oil Recovery Methodology.

Understanding of possible molecular interactions at liquid-liquid and solid-liquid interfaces can shed lights onto the nature's design and authorise fine manipulation aptitude in biological, manufacturing, microfluidic and oil recovery applications. Of particular interest is the capability to control the aggregation of organic and biological macromolecules, which typically poses significant challenges for oil industry and human life, respectively. Following asphaltene aggregation phenomenon through π-stacking and hydrogen bonding interactions, asphaltene aggregates can form a thin layer at the crude oil-brine interface through noncovalent interactions such as -O-H···O hydrogen bonds and/or alter the wettability state of the solid surface from initially water-wet into mixed-oil wetting. Here, we probe the impact of water with variety of salinities and ion types on formation of water in oil micro-emulsions, asphaltene deposition, and induced water wettability transition at micro scale. For the first time we investigate the influence of water in oil micro-emulsions on asphaltene aggregation and deposition phenomena at elevated pressure and temperature conditions. We also monitor the micro-wettability alterations of gold surface of the QCM owing to ion valency/concentration changes using state of the art ESEM imaging facility. Our results depict that owing to the substitution of divalent cations with monovalent ones, asphaltene deposition is repelled and the solid surface becomes more hydrophilic, proposing a generalizable strategy to control wettability and an elucidation for the profitability of so-called low salinity water flooding, an enhanced oil recovery methodology. For the biological applications, this study provides insights into the potential roles of ions and hydrogen bonds in the protein deposition in tissues and self-assembly interactions and efficiency of drugs against protein aggregation drivers.

Impact of Interstitial Ni on the Thermoelectric Properties of the Half-Heusler TiNiSn.

TiNiSn is an intensively studied half-Heusler alloy that shows great potential for waste heat recovery. Here, we report on the structures and thermoelectric properties of a series of metal-rich TiNi1+ySn compositions prepared via solid-state reactions and hot pressing. A general relation between the amount of interstitial Ni and lattice parameter is determined from neutron powder diffraction. High-resolution synchrotron X-ray powder diffraction reveals the occurrence of strain broadening upon hot pressing, which is attributed to the metastable arrangement of interstitial Ni. Hall measurements confirm that interstitial Ni causes weak n-type doping and a reduction in carrier mobility, which limits the power factor to 2.5-3 mW m-1 K-2 for these samples. The thermal conductivity was modelled within the Callaway approximation and is quantitively linked to the amount of interstitial Ni, resulting in a predicted value of 12.7 W m-1 K-1 at 323 K for stoichiometric TiNiSn. Interstitial Ni leads to a reduction of the thermal band gap and moves the peak ZT = 0.4 to lower temperatures, thus offering the possibility to engineer a broad ZT plateau. This work adds further insight into the impact of small amounts of interstitial Ni on the thermal and electrical transport of TiNiSn.

Grain-by-Grain Compositional Variations and Interstitial Metals-A New Route toward Achieving High Performance in Half-Heusler Thermoelectrics.

Half-Heusler alloys based on TiNiSn are promising thermoelectric materials characterized by large power factors and good mechanical and thermal stabilities, but they are limited by large thermal conductivities. A variety of strategies have been used to disrupt their thermal transport, including alloying with heavy, generally expensive, elements and nanostructuring, enabling figures of merit, ZT ≥ 1 at elevated temperatures (>773 K). Here, we demonstrate an alternative strategy that is based around the partial segregation of excess Cu leading to grain-by-grain compositional variations, the formation of extruded Cu "wetting layers" between grains, and-most importantly-the presence of statistically distributed interstitials that reduce the thermal conductivity effectively through point-defect scattering. Our best TiNiCuySn (y ≤ 0.1) compositions have a temperature-averaged ZTdevice = 0.3-0.4 and estimated leg power outputs of 6-7 W cm-2 in the 323-773 K temperature range. This is a significant development as these materials were prepared using a straightforward processing method, do not contain any toxic, expensive, or scarce elements, and are therefore promising candidates for large-scale production.

Impact of Nb vacancies and p-type doping of the NbCoSn-NbCoSb half-Heusler thermoelectrics.

The half-Heuslers NbCoSn and NbCoSb have promising thermoelectric properties. Here, an investigation of the NbCo1+ySn1-zSbz (y = 0, 0.05; 0 ≤ z ≤ 1) solid-solution is presented. In addition, the p-type doping of NbCoSn using Ti and Zr substitution is investigated. Rietveld analysis reveals the gradual creation of Nb vacancies to compensate for the n-type doping caused by the substitution of Sb in NbCoSn. This leads to a similar valence electron count (∼18.25) for the NbCo1+ySn1-zSbz samples (z > 0). Mass fluctuation disorder due to the Nb vacancies strongly decreases the lattice thermal conductivity from 10 W m-1 K-1 (z = 0) to 4.5 W m-1 K-1 (z = 0.5, 1). This is accompanied by a transition to degenerate semiconducting behaviour leading to large power factors, S2/ρ = 2.5-3 mW m-1 K-2 and figures of merit, ZT = 0.25-0.33 at 773 K. Ti and Zr can be used to achieve positive Seebeck values, e.g. S = +150 µV K-1 for 20% Zr at 773 K. However, the electrical resistivity, ρ323K = 27-35 mΩ cm, remains too large for these materials to be considered useful p-type materials.

ESEM-EDX characterisation of airborne particles from an industrialised area of northern Greece.

The aim of this study was to characterise individual airborne particles collected from the Ptolemais-Kozani region (Western Macedonia), northern Greece. Throughout a 1-year period (March 2003 to February 2004), we collected several filters that captured airborne particles at seven sampling sites distributed throughout the area. The airborne particles captured on the filters were then characterised by environmental scanning electron microscopy (ESEM) coupled with energy-dispersive X-ray analysis (EDX). The particles were categorised as geogenic, biogenic and anthropogenic. The main anthropogenic airborne particles were fly ash (released from lignite-fired power plants) and carbonaceous (soot and char) and metalliferous (mainly iron- and copper-enriched) particulates. We present here characteristic ESEM and EDX spectra for the airborne particles and underline the presence of characteristic primary and secondary sulphates.