Triptycene as a scaffold in metallocene catalyzed olefin polymerization.

A set of metallocene olefin polymerization catalysts bearing triptycene moieties in either position 4-5 (complexes Ty1-Ty5) or in position 5-6 (complexes Ty6-Ty8) of the basic dimethylsilyl-bridged bis(indenyl) system has been tested in propene polymerization and in ethene/1-hexene copolymerization. Comparison of the results with QSPR (quantitative structure-property relationship) predictions not parametrized for these exotic ligand variations demonstrates that trends can still be identified by extrapolation. Interestingly, Ty7, upon suitable activation, provides a highly isotactic polypropylene with an exceptional amount of 2,1 regio-errors (8%). The previously developed QSPR type models successfully predicted the low regioselectivity of this catalyst, despite the fact that the catalyst structure differs significantly from the benchmark set.

Gold-Catalysed Heck Reaction: Fact or Fiction? Correspondence on "Unlocking the Chain Walking Process in Gold Catalysis".

Two recent high-profile publications reported the formation of Heck-type arylated alkenes catalysed by MeDalPhosAuCl/AgOTf (J. Am. Chem. Soc. 2023, 145, 8810) and their cyclisation to tetralines (Angew. Chem. Int. Ed. 2023, e202312786). It was claimed that these were the first demonstrations in gold catalysis of alkene insertion into Au-aryl bonds, ß-H elimination and chain-walking by Au-H dications. We show here that in fact this chemistry is a two-stage process. Only the first step, the production of an alkyl triflate ester as the primary organic product by the well-known alkene heteroarylation sequence, involves gold. The subsequent formation of Heck-type olefins and their cyclisation to tetralines represent classical H+-triggered carbocationic chemistry. These steps proceed in the absence of gold with identical results. Literature claims of new gold reactivity such as chain walking by the putative [LAuH]2+ dication have no basis in fact.

Revisiting Stereoselective Propene Polymerization Mechanisms: Insights through the Activation Strain Model.

The stereoelectronic factors responsible for stereoselectivity in propene polymerization with several metallocene and post-metallocene transition metal catalysts have been revisited using a combined approach of DFT calculations, the Activation Strain Model, Natural Energy Decomposition Analysis and a molecular descriptor (%VBur). There are in most cases two different paths leading to the formation of stereoerrors (SE), and the classical model does not suffice to fully understand stereoregulation. Improving stereoselectivity requires raising the energies of both SE insertion transition states. Our analyses show that the degrees of deformation of the active site (catalyst+chain) and the prochiral monomer differ for these two paths, and between different catalyst classes. Based on such analyses we discuss: a) the subtle differences in SE formation between stereoselective catalysts with different ligand frameworks; b) the reason for exceptional stereoselectivity reported for a special ansa-metallocene catalyst; c) the (double) stereocontrol origin for isoselective catalysts; d) the electronic contribution for isoselective catalysts generating SE by a modification of the ligand wrapping mode during the polymerization. Although this study will not immediately suggest new catalyst structures, we believe that understanding stereoregulation in great detail will increase our chances of success.

Cocatalyst effects in Hf-catalysed olefin polymerization: taking well-defined Al-alkyl borate salts into account.

Hafnium catalysts for olefin polymerization are often very sensitive to the nature of cocatalysts, especially if they contain "free" aluminium trialkyls. Herein, cocatalyst effects in Hf-catalysed propene polymerization are examined for four Hf catalysts belonging to the family of CS-symmetric (Hf-CS-Met) and C2-symmetric (Hf-C2-Met) metallocenes, as well as of octahedral (Hf-OOOO) and pentacoordinated (Hf-PyAm) "post-metallocenes". The performance of the recently developed {[iBu2(PhNMe2)Al]2(µ-H)}+[B(C6F5)4]- (AlHAl) cocatalyst is compared with that of established systems like methylalumoxane, phenol-modified methylalumoxane and trityl borate/tri-iso-butylaluminium. The worst catalytic performance is observed with MAO. Conversely, the best cocatalyst varies depending on the Hf catalyst used and the performance indicator of interest, highlighting the complexity and importance of selecting the right precatalyst/cocatalyst combination. AlHAl proved to be a suitable system for all catalysts tested and, in some cases, it provides the best performance in terms of productivity (e.g. with hafnocenes). Furthermore, it generally leads to high molecular weight polymers, also with catalysts enabling easy chain transfer to Al like Hf-PyAm. This suggests that AlHAl has a low tendency to form heterodinuclear adducts with the cationic active species, therefore preventing the formation of dormant sites and/or termination events by chain transfer to Al.

Octahedral Zirconium Salan Catalysts for Olefin Polymerization: Substituent and Solvent Effects on Structure and Dynamics.

Group 4 metal-Salan olefin polymerization catalysts typically have relatively low activity, being slowed down by a pre-equilibrium favoring a non-polymerization active resting state identified as a mer-mer isomer (MM); formation of the polymerization active fac-fac species (FF) requires isomerization. We now show that the chemistry is more subtle than previously realized. Salan variations bearing large, flat substituents can achieve very high activity, and we ascribe this to the stabilization of the FF isomer, which becomes lower in energy than MM. Detailed in situ NMR studies of a fast (o-anthracenyl) and a slow (o-tBu) Salan precursors, suitably activated, indicate that preferred isomers in solution are different: the fast catalyst prefers FF while the slow catalyst prefers a highly distorted MM geometry. Crystal structures of the activated o-anthracenyl substituted complex with a moderately (chlorobenzene) and, more importantly, a weakly coordinating solvent (toluene) in the first coordination sphere emphasize that the active FF isomer is preferred, at least for the benzyl species. Site epimerization (SE) barriers for the fast catalyst (ΔS > 0, dissociative) and the slow catalyst (ΔS < 0, associative) in toluene corroborate the solvent role. Diagnostic NMe 13C chemical shift differences allow unambiguous detection of FF or MM geometries for seven activated catalysts in different solvents, highlighting the role of solvent coordination strength and bulkiness of the ortho-substituent on the isomer equilibrium. For the first time, active polymeryl species of Zr-Salan catalysts were speciated. The slow catalyst is effectively trapped in the inactive MM state, as previously suggested. Direct observation of fast catalysts is hampered by their high reactivity, but the product of the first 1-hexene insertion maintains its FF geometry.

A Hydrocarbon Soluble, Molecular and "Complete" Al-Cocatalyst for High Temperature Olefin Polymerization.

The dinuclear aluminum salt {[iBu2(DMA)Al]2(µ-H)}+[B(C6F5)4]- (AlHAl; DMA = N,N-dimethylaniline) is the prototype of a new class of molecular cocatalysts for catalytic olefin polymerization, its modular nature offering easy avenues for tailoring the activator to specific needs. We report here, as proof of concept, a first variant (s-AlHAl) bearing p-hexadecyl-N,N-dimethylaniline (DMAC16) units, which enhances solubility in aliphatic hydrocarbons. The novel s-AlHAl was used successfully as an activator/scavenger in ethylene/1-hexene copolymerization in a high-temperature solution process.

Tweaking the bridge in metallocene Zr(IV)/W(IV) bimetallic hydrides.

Zirconocene cations react with Cp2WH2 affording the bimetallic [Cp2Zr(µ-H)(µ-η1:η5-C5H4)WHCp]+ bridging hydride 1 (Cp = cyclopentadienyl anion, C5H5-) via σ-bond metathesis. Complex 1 features an atypical out of plane Zr(µ-H)W moiety, where no intermetallic interaction is involved, and a fluxional core. Coordination geometry and bond distances of the bridging hydride interaction can be modulated upon reaction with Lewis bases and unsaturated substrates. PMe3, P(p-tol)3, 3,5-dimethylpyridine and THF bind to 1 and shift the hydride bridge on the coordination plane of Zr. Insertion of olefins and alkynes into the Zr-C bond of 1 leads instead to alkyl and vinyl species where the Zr and W coordination planes are perpendicular to each other. Such alterations of the Zr(µ-H)W arrangement are reflected in the average 1H NMR chemical shift values of the hydride, which correlate linearly with computed Zr-H distances. Reactivity experiments with H2 showed that the bridging hydride interaction prevents bimetallic cooperativity and that σ-bond metathesis between Zr-C and H-H bonds is the preferred pathway for all the investigated complexes.

Unconventional Stereoerror Formation Mechanisms in Nonmetallocene Propene Polymerization Systems Revealed by DFT Calculations.

An unconventional mechanism for the stereoerror formation in propene polymerization catalyzed by C1-symmetric salalen-M systems (M = Zr, Hf) is suggested by DFT calculations. While propagation happens with the ligand in its fac-mer conformation, a change of ligand wrapping mode from fac-mer to fac-fac is the main source of the lower stereoselectivities obtained with Zr and Hf. This is different for the Ti analogues, where the ligand fac-mer wrapping mode does not play a role. Activation strain analysis indicates that the preference for a chain stationary mechanism of the Zr/Hf species is due to the energy required to distort the reactants (ΔEStrain) rather than to their mutual interaction (ΔEInt).

A High-Throughput Approach to Repurposing Olefin Polymerization Catalysts for Polymer Upcycling.

Efficient and economical plastic waste upcycling relies on the development of catalysts capable of polymer degradation. A systematic high-throughput screening of twenty-eight polymerization catalyst precursors, belonging to the catalyst families of metallocenes, ansa-metallocenes, and hemi- and post-metallocenes, in cis-1,4-polybutadiene (PB) degradation reveals, for the first time, important structure-activity correlations. The upcycling conditions involve activation of the catalysts (at 0.18 % catalyst loading) with tri-iso-butyl aluminum at 50 °C in toluene. The data indicate the ability to degrade PB is a general reactivity profile of neutral group 4 metal hydrides. A simple quantitative-structure activity relationship (QSAR) model utilizing two descriptors for the distribution of steric bulk in the active pocket and one measuring the metal ion electrophilicity reveals the degradation ability improves with increased but not overbearing steric congestion and lower electrophilicity.

Hafnium vs. Zirconium, the Perpetual Battle for Supremacy in Catalytic Olefin Polymerization: A Simple Matter of Electrophilicity?

The performance of C2-symmetric ansa-hafnocene catalysts for isotactic polypropylene typically deteriorates at increasing temperature much faster than that of their zirconium analogues. Herein, we analyze in detail a set of five Hf/Zr metallocene pairs-including some of the latest generation catalysts-at medium- to high-polymerization temperature. Quantitative structure-activity relationship (QSAR) models for stereoselectivity, the ratio allyl/vinyl chain ends, and 2,1/3,1 misinsertions in the polymer indicate a strong dependence of polymerization performance on electrophilicity of the catalyst, which is a function of the ligand framework and the metal center. Based on this insight, the stronger performance decline of hafnocenes is ascribed to electrophilicity-dependent stabilization effects.

ansa-Zirconocene Catalysts for Isotactic-Selective Propene Polymerization at High Temperature: A Long Story Finds a Happy Ending.

Absolute rigidity is rare in the "soft" world of organometallics. Here we introduce two cyclopenta[a]triptycyl ansa-zirconocene catalysts for isotactic-selective propene polymerization, designed by means of an integrated high-throughput experimentation/quantitative structure-activity relationship modeling approach. An ultrarigid ligand precisely wrapped around the Zr center enforces an enzyme-like lock and key fit, effectively hampering undesired reactive events, even at high temperature. Stereodefective units are hardly detectable by 13C NMR in the polymer produced at 120 °C; this corresponds to an enantioselectivity exceeding 6-7 kcal/mol: i.e., less than 1 propene misinsertion every 4000 (and at room temperature, one every ∼40000!).

On the limits of tuning comonomer affinity of 'Spaleck-type'ansa-zirconocenes in ethene/1-hexene copolymerization: a high-throughput experimentation/QSAR approach.

For a set of 40 silicon-bridged C2-symmetric ansa-zirconocenes, reactivity ratios in ethene/1-hexene copolymerization were experimentally determined by means of an accurate high-throughput experimentation (HTE) approach, and used to develop quantitative structure-activity relationship (QSAR) models for comonomer affinity using chemically meaningful descriptors. These QSAR models rely almost exclusively on steric descriptors, with the single most important descriptor being the 'openness' of the open quadrants. Catalysts with an unobstructed main insertion pathway, i.e. without substituents affecting the open quadrant, show a remarkable insensitivity to further substituent effects, be it in 2-, 4-, 5-, 6- or 7-position or the bridge. We attribute this insensitivity to a shift in rate-limiting step for the comonomer incorporation, from insertion to olefin capture, with the latter being much less sensitive to modulation of the active pocket than the former. This indicates that our best incorporators are already close to the upper limit for comonomer affinity within this catalyst class.

An Integrated High Throughput Experimentation/Predictive QSAR Modeling Approach to ansa-Zirconocene Catalysts for Isotactic Polypropylene.

Compared to heterogenous Ziegler-Natta systems (ZNS), ansa-metallocene catalysts for the industrial production of isotactic polypropylene feature a higher cost-to-performance balance. In particular, the C2-symmetric bis(indenyl) ansa-zirconocenes disclosed in the 1990s are complex to prepare, less stereo- and/or regioselective than ZNS, and lose performance at practical application temperatures. The golden era of these complexes, though, was before High Throughput Experimentation (HTE) could contribute significantly to their evolution. Herein, we illustrate a Quantitative Structure - Activity Relationship (QSAR) model trained on a robust and highly accurate HTE database. The clear-box QSAR model utilizes, in particular, a limited number of chemically intuitive 3D geometric descriptors that screen various regions of space in and around the catalytic pocket in a modular way thus enabling to quantify individual substituent contributions. The main focus of the paper is on the methodology, which should be of rather broad applicability in molecular organometallic catalysis. Then again, it is worth emphasizing that the specific application reported here led us to identify in a comparatively short time novel zirconocene catalysts rivaling or even outperforming all previous homologues which strongly indicates that the metallocene story is not over yet.

Reactivity Trends of Lewis Acidic Sites in Methylaluminoxane and Some of Its Modifications.

The established model cluster (AlOMe)16(AlMe3)6 for methylaluminoxane (MAO) cocatalyst has been studied by density functional theory, aiming to rationalize the different behaviors of unmodified MAO and TMA-depleted MAO/BHT (TMA = trimethylaluminum; BHT = 2,6-di-tert-butyl-4-methylphenol), highlighted in previous experimental studies. The tendency of the three model Lewis acidic sites A-C to release neutral Al fragments (i.e., AlMe2R; R = Me or bht) or transient aluminum cations (i.e., [AlMeR]+) has been investigated both in the absence and in the presence of neutral N-donors. Sites C are most likely responsible for the activation capabilities of TMA-rich MAO, but TMA depletion destabilizes them, possibly inducing structural rearrangements. The remaining sites A and B, albeit of lower Lewis acidity, should be still able to release cationic Al fragments when TMA-depleted modified MAOs are treated with N-donors (e.g. [AlMe(bht)]+ from MAO/BHT). These findings provide tentative interpretations for earlier observations of donor-dependent ionization tendencies of MAO and MAO/BHT and how TMA depleted MAOs can still be potent activators.

H2 activation by zirconaziridinium ions: σ-bond metathesis versus frustrated Lewis pair reactivity.

Zirconaziridinium ions [Cp2Zr(η2-CH2NR2)]+ can potentially activate H2 by two routes: σ-bond metathesis or FLP reactivity. We show here that Zr-C hydrogenolysis by σ-bond metathesis precedes and enables subsequent heterolytic H2 cleavage through FLP pathways. DFT calculations show the involvement of transition states with approximately linear NHH and bent ZrHH arrangements without any direct Zr-amine interaction.

Do Gold(III) Complexes Form Hydrogen Bonds? An Exploration of AuIII Dicarboranyl Chemistry.

The reaction of 1,1'-Li2 [(2,2'-C2 B10 H10 )2 ] with the cyclometallated gold(III) complex (C^N)AuCl2 afforded the first examples of gold(III) dicarboranyl complexes. The reactivity of these complexes is subject to the trans-influence exerted by the dicarboranyl ligand, which is substantially weaker than that of non-carboranyl anionic C-ligands. In line with this, displacement of coordinated pyridine by chloride is only possible under forcing conditions. While treatment of (C^N)Au{(2,2'-C2 B10 H10 )2 } (2) with triflic acid leads to Au-C rather than Au-N bond protonolysis, aqueous HBr cleaves the Au-N bond to give the pyridinium bromo complex 7. The trans-influence of a series of ligands including dicarboranyl and bis(dicarboranyl) was assessed by means of DFT calculations. The analysis demonstrated that it was not sufficient to rely exclusively on geometric descriptors (calculated or experimental) when attempting to rank ligands for their trans influence. Complex (C^N)Au(C2 B10 H11 )2 containing two non-chelating dicarboranyl ligands was prepared similar to 2. Its reaction with trifluoroacetic acid also leads to Au-N cleavage to give trans-(Hpy^C)Au(OAcF )(C2 B10 H11 )2 (8). In crystals of 8 the pyridinium N-H bond points towards the metal centre, while in 7 it is bent away. The possible contribution of gold(III)⋅⋅⋅H-N hydrogen bonding in these complexes was investigated by DFT calculations. The results show that, unlike the situation for platinum(II), there is no evidence for an energetically significant contribution by hydrogen bonding in the case of gold(III).

Heterolytic bond activation at gold: evidence for gold(iii) H-B, H-Si complexes, H-H and H-C cleavage.

The coordinatively unsaturated gold(iii) chelate complex [(C^N-CH)Au(C6F5)]+ (1 +) reacts with main group hydrides H-BPin and H-SiEt3 in dichloromethane solution at -70 °C to form the corresponding σ-complexes, which were spectroscopically characterized (C^N-CH = 2-(C6H3Bu t )-6-(C6H4Bu t )pyridine anion; Pin = OCMe2CMe2O). In the presence of an external base such as diethyl ether, heterolytic cleavage of the silane H-Si bond leads to the gold hydrides [{(C^N-CH)AuC6F5}2(µ-H)]+ (2 +) and (C^N-CH)AuH(C6F5) (5), together with spectroscopically detected [Et3Si-OEt2]+. The activation of dihydrogen also involves heterolytic H-H bond cleavage but requires a higher temperature (-20 °C). H2 activation proceeds in two mechanistically distinct steps: the first leading to 2 plus [H(OEt2)2]+, the second to protonation of one of the C^N pyridine ligands and reductive elimination of C6F5H. By comparison, formation of gold hydrides by cleavage of suitably activated C-H bonds is very much more facile; e.g. the reaction of 1·OEt2 with Hantzsch ester is essentially instantaneous and quantitative at -30 °C. This is the first experimental observation of species involved in the initial steps of gold catalyzed hydroboration, hydrosilylation and hydrogenation and the first demonstration of the ability of organic C-H bonds to act as hydride donors towards gold.

Isocyanide insertion into Au-H bonds: first gold iminoformyl complexes.

Isocyanides insert into gold(iii)-hydrogen bonds to give the first examples of gold iminoformyl complexes. The reaction is initiated by catalytic amounts of radicals; DFT calculations indicate that this is an equilibrium reaction driven forward by isocyanide in sufficient excess to trap the Au(ii) intermediate.

Reductive Elimination Leading to C-C Bond Formation in Gold(III) Complexes: A Mechanistic and Computational Study.

The factors affecting the rates of reductive C-C cross-coupling reactions in gold(III) aryls were studied by using complexes that allow easy access to a series of electronically modified aryl ligands, as well as to gold methyl and vinyl complexes, by using the pincer compounds [(C^N^C)AuR] (R=C6 F5 , CH=CMe2 , Me and p-C6 H4 X, where X=OMe, F, H, tBu, Cl, CF3 , or NO2 ) as starting materials (C^N^C=2,6-(4'-tBuC6 H3 )2 pyridine dianion). Protodeauration followed by addition of one equivalent SMe2 leads to the quantitative generation of the thioether complexes [(C^N-CH)AuR(SMe2 )]+ . Upon addition of a second SMe2 pyridine is displaced, which triggers the reductive aryl-R elimination. The rates for these cross-couplings increase in the sequence k(vinyl)>k(aryl)≫k(C6 F5 )>k(Me). Vinyl-aryl coupling is particularly fast, 1.15×10-3  L mol-1 s-1 at 221 K, whereas both C6 F5 and Me couplings encountered higher barriers for the C-C bond forming step. The use of P(p-tol)3 in place of SMe2 greatly accelerates the C-C couplings. Computational modelling shows that in the C^N-bonded compounds displacement of N by a donor L is required before the aryl ligands can adopt a conformation suitable for C-C bond formation, so that elimination takes place from a four-coordinate intermediate. The C-C bond formation is the rate-limiting step. In the non-chelating case, reductive C(sp2 )-C(sp2 ) elimination from three-coordinate ions [(Ar1 )(Ar2 )AuL]+ is almost barrier-free, particularly if L=phosphine.