Copper-cobalt double metal cyanides as green catalysts for phosphoramidate synthesis.

Phosphoramidates are common and widespread backbones of a great variety of fine chemicals, pharmaceuticals, additives and natural products. Conventional approaches to their synthesis make use of toxic chlorinated reagents and intermediates, which are sought to be avoided at an industrial scale. Here we report the coupling of phosphites and amines promoted by a Cu3[Co(CN)6]2-based double metal cyanide heterogeneous catalyst using I2 as additive for the synthesis of phosphoramidates. This strategy successfully provides an efficient, environmentally friendly alternative to the synthesis of these valuable compounds in high yields and it is, to the best of our knowledge, the first heterogeneous approach to this protocol. While the detailed study of the catalyst structure and of the metal centers by PXRD, FTIR, EXAFS and XANES revealed changes in their coordination environment, the catalyst maintained its high activity for at least 5 consecutive iterations of the reaction. Preliminary mechanism studies suggest that the reaction proceeds by a continuous change in the oxidation state of the Cu metal, induced by a O2/I- redox cycle.

Quantitative Structural Description of Zeolites by Machine Learning Analysis of Infrared Spectra.

Application of machine learning (ML) algorithms to spectroscopic data has a great potential for obtaining hidden correlations between structural information and spectral features. Here, we apply ML algorithms to theoretically simulated infrared (IR) spectra to establish the structure-spectrum correlations in zeolites. Two hundred thirty different types of zeolite frameworks were considered in the study whose theoretical IR spectra were used as the training ML set. A classification problem was solved to predict the presence or absence of possible tilings and secondary building units (SBUs). Several natural tilings and SBUs were also predicted with an accuracy above 89%. The set of continuous descriptors was also suggested, and the regression problem was also solved using the ExtraTrees algorithm. For the latter problem, additional IR spectra were computed for the structures with artificially modified cell parameters, expanding the database to 470 different spectra of zeolites. The resulting prediction quality above or close to 90% was obtained for the average Si-O distances, Si-O-Si angles, and volume of TO4 tetrahedra. The obtained results provide new possibilities for utilization of infrared spectra as a quantitative tool for characterization of zeolites.

Cu-α-diimine Compounds Encapsulated in Porous Materials as Catalysts for Electrophilic Amination of Aromatic C-H Bonds.

Electrophilic amination has emerged as a more environmentally benign approach to construct arene C-N bonds. However, heterogeneous catalysts remain largely unexplored in this area, even though their use could facilitate product purification and catalyst recovery. Here we investigate strategies to heterogenize a Cu(2,2'-bipyridine) catalyst for the amination of arenes lacking a directing group with hydroxylamine-O-sulfonic acid (HOSA). Besides immobilization of Cu on a metal-organic framework (MOF) or covalent organic framework (COF) with embedded 2,2'-bipyridines, a ship-in-a-bottle approach was followed in which the Cu complex is encapsulated in the pores of a zeolite. Recyclability and hot centrifugation tests show that zeolite Beta-entrapped CuII(2,2'-bipyridine) is superior in terms of stability. With N-methylmorpholine as a weakly coordinating, weak base, simple arenes, such as mesitylene, could be aminated with yields up to 59%, corresponding to a catalyst TON of 24. The zeolite could be used in three consecutive runs without a decrease in activity. Characterization of the catalyst by EPR and XAS showed that the active catalytic complex consisted of a site-isolated CuII species with one 2,2'-bipyridine ligand.

Rational Functionalization of UiO-66 with Pd Nanoparticles: Synthesis and In Situ Fourier-Transform Infrared Monitoring.

Functionalization of metal-organic frameworks (MOFs) with noble metal nanoparticles (NPs) is a challenging task. Conventional impregnation by metals often leads to agglomerates on the surface of MOF crystals. Functional groups on linkers interact with metal precursors and promote the homogeneous distribution of NPs in the pores of MOFs, but their uncontrolled localization can block channels and thus hinder mass transport. To overcome this problem, we created nucleation centers only in the defective pores of the UiO-66 MOF via the postsynthesis exchange. First, we have introduced defects into UiO-66 using benzoic acid as a modulator. Second, the modulator was exchanged for amino-benzoic acid. As a result, amino groups have decorated mainly the defective pores and attracted the Pd precursor after impregnation. The interaction of the metal precursor with amino groups and the growth of NPs were monitored by in situ infrared spectroscopy. Three processes were distinguished: the gaseous HCl release, NH2 reactivation, and growth of extended Pd surfaces. Uniform Pd NPs were located in the pores because of the homogeneous distribution of the precursor and pore diffusion-limited nucleation rate. Our work demonstrates an alternative approach of controlled Pd incorporation into UiO-66 that is of great importance for the rational design of heterogeneous catalysts.

Ru-Bipyridine Entrapped in the Supercages of EMC-1 Faujasite as Catalyst for the Trifluoromethylation of Arenes.

Trifluoromethyl (CF3) groups are versatile structural motifs especially in the field of agrochemicals and pharmaceuticals. However, current trifluoromethylation reactions are generally associated with stoichiometric amounts of transition metals/metal oxidants, homogeneous catalysts, high temperatures, and expensive trifluoromethylating agents. In this work, the homogeneous photocatalyst Ru(bipy)32+ is entrapped in the pores of a faujasite support (EMC-1) via a "ship-in-a-bottle" strategy. The formation of the coordination compound was confirmed by Fourier transform infrared (FTIR), UV-Vis spectroscopy, and X-ray absorption spectroscopy (XAS). Due to its high stability toward acidified environments, this single-site heterogeneous catalyst is suitable for the trifluoromethylation of synthetically interesting (hetero)arenes under visible-light irradiation at room temperature. Furthermore, the heterogeneous catalyst could efficiently be reused for at least three times with minimal catalyst leaching/deactivation.

Multifunctional Catalyst Combination for the Direct Conversion of CO2 to Propane.

The production of carbon-rich hydrocarbons via CO2 valorization is essential for the transition to renewable, non-fossil-fuel-based energy sources. However, most of the recent works in the state of the art are devoted to the formation of olefins and aromatics, ignoring the rest of the hydrocarbon commodities that, like propane, are essential to our economy. Hence, in this work, we have developed a highly active and selective PdZn/ZrO2+SAPO-34 multifunctional catalyst for the direct conversion of CO2 to propane. Our multifunctional system displays a total selectivity to propane higher than 50% (with 20% CO, 6% C1, 13% C2, 10% C4, and 1% C5) and a CO2 conversion close to 40% at 350 °C, 50 bar, and 1500 mL g-1 h-1. We attribute these results to the synergy between the intimately mixed PdZn/ZrO2 and SAPO-34 components that shifts the overall reaction equilibrium, boosting CO2 conversion and minimizing CO selectivity. Comparison to a PdZn/ZrO2+ZSM-5 system showed that propane selectivity is further boosted by the topology of SAPO-34. The presence of Pd in the catalyst drives paraffin production via hydrogenation, with more than 99.9% of the products being saturated hydrocarbons, offering very important advantages for the purification of the products.

Hydrogenation of ethylene over palladium: evolution of the catalyst structure by operando synchrotron-based techniques.

Palladium-based catalysts are exploited on an industrial scale for the selective hydrogenation of hydrocarbons. The formation of palladium carbide and hydride phases under reaction conditions changes the catalytic properties of the material, which points to the importance of operando characterization for determining the relation between the relative fractions of the two phases and the catalyst performance. We present a combined time-resolved characterization by X-ray absorption spectroscopy (in both near-edge and extended regions) and X-ray diffraction of a working palladium-based catalyst during the hydrogenation of ethylene in a wide range of partial pressures of ethylene and hydrogen. Synergistic coupling of multiple techniques allowed us to follow the structural evolution of the palladium lattice as well as the transitions between the metallic, hydride and carbide phases of palladium. The nanometric dimensions of the particles resulted in the considerable contribution of both surface and bulk carbides to the X-ray absorption spectra. During the reaction, palladium carbide is formed, which does not lead to a loss of activity. Unusual contraction of the unit cell parameter of the palladium lattice in the spent catalyst was observed upon increasing hydrogen partial pressure.

In situ formation of surface and bulk oxides in small palladium nanoparticles.

Evolution of surface and bulk palladium oxides in supported palladium nanoparticles was followed in situ using X-ray absorption spectroscopy. The surface oxide was found to be easily reducible in hydrogen at room temperature, while removal of bulk oxide required heating in hydrogen above 100 °C. We also found that the co-presence of hydrogen and oxygen favours a stronger oxidation of palladium particles compared to pure oxygen.

Heterogeneous Single-Site Catalysts for C-H Activation Reactions: Pd(II)-Loaded S,O-Functionalized Metal Oxide-Bisphosphonates.

Heterogeneous single-site catalysts contain spatially isolated, well-defined active sites. This allows not only their easy recovery by solid-liquid separation but also the detailed active site design similar to homogeneous catalysts. Here, heterogeneous Pd(II) single-site catalysts were assembled, based on mesoporous metal oxide-bisphosphonate materials as supports. This new family of hybrid organic-inorganic materials with tunable porosity was further functionalized with thioether ligands containing S,O-binding sites that enhance the activity of Pd(II) for C-H activation reactions. The structures of the resulting Pd(II) single-site catalysts were carefully analyzed via solid-state NMR spectroscopy, via texture analysis by N2 physisorption, infrared spectroscopy, and transmission electron microscopy. Furthermore, the immediate environment of the isolated Pd(II) active sites was studied with X-ray absorption spectroscopy. A clear relationship between the thioether ligand surface density and catalyst activity could be established. Significantly higher yields were obtained using highly porous metal oxide-bisphosphonate materials as supports compared to materials with lower porosities, such as conventional metal oxides, indicating that the high surface area facilitates the presence of isolated, well-accessible S,O-supported Pd(II) active sites. A wide scope of model substrates, including industrially relevant arenes, can be converted with high yields by the optimal heterogeneous Pd catalyst.

Dehydrogenation of Ethylene on Supported Palladium Nanoparticles: A Double View from Metal and Hydrocarbon Sides.

Adsorption of ethylene on palladium, a key step in various catalytic reactions, may result in a variety of surface-adsorbed species and formation of palladium carbides, especially under industrially relevant pressures and temperatures. Therefore, the application of both surface and bulk sensitive techniques under reaction conditions is important for a comprehensive understanding of ethylene interaction with Pd-catalyst. In this work, we apply in situ X-ray absorption spectroscopy, X-ray diffraction and infrared spectroscopy to follow the evolution of the bulk and surface structure of an industrial catalysts consisting of 2.6 nm supported palladium nanoparticles upon exposure to ethylene under atmospheric pressure at 50 °C. Experimental results were complemented by ab initio simulations of atomic structure, X-ray absorption spectra and vibrational spectra. The adsorbed ethylene was shown to dehydrogenate to C2H3, C2H2 and C2H species, and to finally decompose to palladium carbide. Thus, this study reveals the evolution pathway of ethylene on industrial Pd-catalyst under atmospheric pressure at moderate temperatures, and provides a conceptual framework for the experimental and theoretical investigation of palladium-based systems, in which both surface and bulk structures exhibit a dynamic nature under reaction conditions.

Iron-/Nitrogen-Doped Electrocatalytically Active Carbons for the Oxygen Reduction Reaction with Low Amounts of Cobalt.

Transition-metal-doped carbon catalysts are promising Pt-free alternatives for low-temperature fuel cells. They are frequently obtained from sacrificial N-rich zeolitic imidazolate frameworks (ZIFs) doped with Co and Fe. The optimal low loading of metals has to be achieved to guarantee the competitive efficiency and facilitate an inquiry into the mechanism of their catalytic activity. We report on microwave-assisted solvothermal synthesis of Zn,Co-ZIFs with a relatively low (1-15 mol %) Co loading, which were further enriched with Fe(II). Materials were pyrolyzed at 700 °C to form catalytically active carbons bearing metal nanoparticles confined in structured carbon. The electrochemistry test of carbons for the oxygen reduction reaction (ORR) in perchloric acid demonstrated their high efficiency even at low cobalt contents. The initial loading of 10 mol % was found efficient, leading to the production of catalytically active carbons allowing for four-electron path of ORR.

In situ X-ray absorption spectroscopy data during formation of active Pt- and Pd-sites in functionalized UiO-67 metal-organic frameworks.

We report a series of Pd K-edge and Pt L 3-edge X-ray absorption spectra (XAS) collected in situ during thermal treatment of functionalized UiO-67-Pd and UiO-67-Pt metal-organic frameworks in inert and reducing atmospheres. We present raw synchrotron data from three subsequent experiments at different beamlines, normalized XAS spectra and k 2-weighted oscillatory χ(k) functions extracted from one of the datasets. Pd K-edge spectra were collected for the samples in 5% H2/He, 3% H2/He and pure He in the temperature range from room temperature (RT) to 450 °C. Pt L 3-edge were collected for the samples in 3% H2/He, 10% H2/He and pure He in the temperature range from RT to 300 °C. All spectra are reported together with the used atmosphere and temperature. For the analysis of all reported datasets, please see "Evolution of Pt and Pd species in functionalized UiO-67 metal-organic frameworks". Fourier-analysis of Pd K-edge is reported in "Formation and growth of Pd nanoparticles in UiO-67 MOF by in situ EXAFS".

Operando X-ray absorption spectra and mass spectrometry data during hydrogenation of ethylene over palladium nanoparticles.

We report the series of Pd K-edge X-ray absorption spectra collected during hydrogenation of ethylene with variable ethylene/hydrogen ratio over carbon supported palladium nanoparticles. The data presented in this article includes normalized X-ray absorption spectra, k 2-weighted oscillatory χ(k) functions extracted from the extended X-ray absorption fine structure (EXAFS) and k 2-weighted Fourier-transformed EXAFS data, χ(R). Each spectrum is reported together with the hydrogen, ethylene and helium flow rates, adjusted during its collection. In addition, time evolution of the ratio of m/Z signals of 30 and 28 registered by online mass spectrometer is presented. The data analysis is reported in Bugaev et al., Catal. Today, 2019 [1].

Partial and Complete Substitution of the 1,4-Benzenedicarboxylate Linker in UiO-66 with 1,4-Naphthalenedicarboxylate: Synthesis, Characterization, and H2-Adsorption Properties.

We describe the synthesis and corresponding full characterization of the set of UiO-66 metal-organic frameworks (MOFs) with 1,4-benzenedicarboxylate (C6H4(COOH)2, hereafter H2BDC) and 1,4-naphthalenedicarboxylate (C10H6(COOH)2, hereafter H2NDC) mixed linkers with NDC contents of 0, 25, 50, and 100%. Their structural (powder X-ray diffraction, PXRD), adsorptive (N2, H2, and CO2), vibrational (IR/Raman), and thermal stability (thermogravimetric analysis, TGA) properties quantitatively correlate with the NDC content in the material. The UiO-66 phase topology is conserved at all relative fractions of BDC/NDC. The comparison between the synchrotron radiation PXRD and 77 K N2-adsorption isotherms obtained on the 50:50 BDC/NDC sample and on a mechanical mixture of the pure BDC and NDC samples univocally proves that in the mixed linkers of the MOFs the BDC and NDC linkers are shared in each MOF crystal, discarding the hypothesis of two independent phases, where each crystal contains only BDC or NDC linkers. The careful tuning of the NDC content opens a way for controlled alteration of the sorption properties of the resulting material as testified by the H2-adsorption experiments, showing that the relative ranking of the materials in H2 adsorption is different in different equilibrium-pressure ranges: at low pressures, 100NDC is the most efficient sample, while with increasing pressure, its relative performance progressively declines; at high pressures, the ranking follows the BDC content, reflecting the larger internal pore volume available in the MOFs with a higher fraction of smaller linkers. The H2-adsorption isotherms normalized by the sample Brunauer-Emmett-Teller specific surface area show, in the whole pressure range, that the surface-area-specific H2-adsorption capabilities in UiO-66 MOFs increase progressively with increasing NDC content. Density functional theory calculations, using the hybrid B3LYP exchange correlation functional and quadruple-ζ with four polarization functions (QZ4P) basis set, show that the interaction of H2 with the H2NDC linker results in an adsorption energy larger by about 15% with respect to that calculated for adsorption on the H2BDC linker.

Exact Stoichiometry of Ce xZr6- x Cornerstones in Mixed-Metal UiO-66 Metal-Organic Frameworks Revealed by Extended X-ray Absorption Fine Structure Spectroscopy.

Bimetallic Ce/Zr-UiO-66 metal-organic frameworks (MOFs) proved to be promising materials for various catalytic redox applications, representing, together with other bimetallic MOFs, a new generation of porous structures. However, no direct proof for the presence of both metals in a single cornerstone of UiO-type MOFs was reported so far. Employing element-selective X-ray absorption spectroscopy techniques herein, we demonstrate, for the first time, that our synthesis route allows obtaining Ce/Zr-UiO-66 MOFs with desired Ce content and bimetallic CeZr5 cornerstones. Performing multiple-edge extended X-ray absorption fine structure analysis, we determine the exact stoichiometry of the cornerstones, which explains the dependence of thermal and chemical stability of the materials on Ce content.

Fluorescence-detected XAS with sub-second time resolution reveals new details about the redox activity of Pt/CeO2 catalyst.

A setup for fluorescence-detected X-ray absorption spectroscopy (XAS) with sub-second time resolution has been developed. This technique allows chemical speciation of low-concentrated materials embedded in highly absorbing matrices, which cannot be studied using transmission XAS. Using this setup, the reactivity of 1.5 wt% Pt/CeO2 catalyst was studied with 100 ms resolution during periodic cycling in CO- and oxygen-containing atmospheres in a plug-flow reactor. Measurements were performed at the Pt L3- and Ce L3-edges. The reactivity of platinum and cerium demonstrated a strong correlation. The oxidation of the catalyst starts on the ceria support helping the oxidation of platinum nanoparticles. The new time-resolved XAS setup can be applied to various systems, capable of reproducible cycling between different states triggered by gas atmosphere, light, temperature, etc. It opens up new perspectives for mechanistic studies on automotive catalysts, selective oxidation catalysts and photocatalysts.

Time-resolved operando studies of carbon supported Pd nanoparticles under hydrogenation reactions by X-ray diffraction and absorption.

The formation of palladium hydride and carbide phases in palladium-based catalysts is a critical process that changes the catalytic performance and selectivity of the catalysts in important industrial reactions, such as the selective hydrogenation of alkynes or alkadienes. We present a comprehensive study of a 5 wt% carbon supported Pd nanoparticle (NP) catalyst in various environments by using in situ and operando X-ray absorption spectroscopy and diffraction, to determine the structure and evolution of palladium hydride and carbide phases, and their distribution throughout the NPs. We demonstrate how the simultaneous analysis of extended X-ray absorption fine structure (EXAFS) spectra and X-ray powder diffraction (XRPD) patterns allows discrimination between the inner "core" and outer "shell" regions of the NP during hydride phase formation at different temperatures and under different hydrogen pressures, indicating that the amount of hydrogen in the shell region of the NP is lower than that in the core. For palladium carbide, advanced analysis of X-ray absorption near-edge structure (XANES) spectra allows the detection of Pd-C bonds with carbon-containing molecules adsorbed at the surface of the NPs. In addition, H/Pd and C/Pd stoichiometries of PdHx and PdCy phases were obtained by using theoretical modelling and fitting of XANES spectra. Finally, the collection of operando time-resolved XRPD patterns (with a time resolution of 5 s) allowed the detection, during the ethylene hydrogenation reaction, of periodic oscillations in the NPs core lattice parameter, which were in phase with the MS signal of ethane (product) and in antiphase with the MS signal of H2 (reactant), highlighting an interesting direct structure-reactivity relationship. The presented studies show how a careful combination of X-ray absorption and diffraction can differentiate the structure of the core, shell and surface of the palladium NPs under working conditions and prove their relevant roles in catalysis.

Unravelling the Redox-catalytic Behavior of Ce4+ Metal-Organic Frameworks by X-ray Absorption Spectroscopy.

The introduction of Ce4+ as a structural cation has been shown to be a promising route to redox active metal-organic frameworks (MOFs). However, the mechanism by which these MOFs act as redox catalysts remains unclear. Herein, we present a detailed study of the active site in [Ce6 O4 (OH)4 ]-based MOFs such as Ce-UiO-66, involved in the aerobic oxidation of benzyl alcohol, chosen as a model redox reaction. X-ray absorption spectroscopy (XAS) data confirm the reduction of up to one Ce4+ ion per Ce6 cluster with a corresponding outwards radial shift due to the larger radius of the Ce3+ cation, while not compromising the structural integrity of the framework, as evidenced by powder X-ray diffraction. This unambiguously demonstrates the involvement of the metal node in the catalytic cycle and explains the need for 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as a redox mediator to bridge the gap between the one-electron oxidation of the Ce4+ /Ce3+ couple and the two-electron alcohol oxidation. Finally, an improved catalytic system with Ce-MOF-808 and TEMPO was developed which outperformed all other tested Ce4+ -MOFs.

Effect of Molecular Guest Binding on the d-d Transitions of Ni2+ of CPO-27-Ni: A Combined UV-Vis, Resonant-Valence-to-Core X-ray Emission Spectroscopy, and Theoretical Study.

We used Ni K-edge resonant-valence-to-core X-ray emission spectroscopy (RVtC-XES, also referred to as direct RIXS), an element-selective bulk-sensitive synchrotron-based technique, to investigate the electronic structure of the CPO-27-Ni metal-organic framework (MOF) upon molecular adsorption of significant molecular probes: H2O, CO, H2S, and NO. We compare RVtC-XES with UV-vis spectroscopy, and we show that the element selectivity of RVtC-XES is of strategic significance to observe the full set of d-d excitations in Ni2+, which are partially overshadowed by the low-energy π-π* transitions of the Ni ligands in standard diffuse-reflectance UV-vis experiments. Our combined RVtC-XES/UV-vis approach provides access to the whole set of d-d excitations, allowing us a complete discussion of the changes undergone by the electronic configuration of the Ni2+ sites hosted within the MOF upon molecular adsorption. The experimental data have been interpreted by multiplet ligand-field theory calculations based on Wannier orbitals. This study represents a step further in understanding the ability of the CPO-27-Ni MOFs in molecular sorption and separation applications.