RESUMO
The free fibula osteoseptocutaneous flap is the standard for reconstruction of extensive mandibular defects. The procedure must be precise to achieve the required functional and aesthetic results. The aim of the present study was to calculate retrospectively the exact differences in surgical outcome based on preoperative and postoperative Computed Tomography data sets. Ten patients with unilateral reconstructions of the mandible with a fibula based on conventional planning were analyzed quantitatively, applying mirroring techniques with direct comparison of the theoretically optimum with the actual reconstruction. The results showed that there is a significant discrepancy between what is actually achieved and the theoretical optimum. The result of the present retrospective analysis shows that there is room for further improvement of the outcome in complex mandible reconstruction cases.
Assuntos
Transplante Ósseo/métodos , Carcinoma de Células Escamosas/cirurgia , Fíbula/transplante , Mandíbula/cirurgia , Neoplasias Mandibulares/cirurgia , Cirurgia Assistida por Computador , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Procedimentos de Cirurgia Plástica , Estudos Retrospectivos , Retalhos Cirúrgicos/irrigação sanguínea , Tomografia Computadorizada por Raios XRESUMO
This tutorial outlines the details of the AOCMF image-based classification system for fractures of the mandible at the precision level 2 allowing description of their topographical distribution. A short introduction about the anatomy is made. Mandibular fractures are classified by the anatomic regions involved. For this purpose, the mandible is delineated into an array of nine regions identified by letters: the symphysis/parasymphysis region anteriorly, two body regions on each lateral side, combined angle and ascending ramus regions, and finally the condylar and coronoid processes. A precise definition of the demarcation lines between these regions is given for the unambiguous allocation of fractures. Four transition zones allow an accurate topographic assignment if fractures end up in or run across the borders of anatomic regions. These zones are defined between angle/ramus and body, and between body and symphysis/parasymphysis. A fracture is classified as "confined" as long as it is located within a region, in contrast to a fracture being "nonconfined" when it extents to an adjoining region. Illustrations and case examples of mandible fractures are presented to become familiar with the classification procedure in daily routine.
RESUMO
The AOCMF Classification Group developed a hierarchical three-level craniomaxillofacial classification system with increasing level of complexity and details. The highest level 1 system distinguish four major anatomical units including the mandible (code 91), midface (code 92), skull base (code 93), and cranial vault (code 94). This tutorial presents the level 2 system for the midface unit that concentrates on the location of the fractures within defined regions in the central (upper, intermediate, and lower) and lateral (zygoma, pterygoid) midface, as well as the internal orbit and palate. The level 2 midface fracture location outlines the topographic boundaries of the anatomical regions. The common nasoorbitoethmoidal and zygoma en bloc fracture patterns, as well as the time-honored Le Fort classification are taken into account. This tutorial is organized in a sequence of sections dealing with the description of the classification system with illustrations of the topographical cranial midface regions along with rules for fracture location and coding, a series of case examples with clinical imaging and a general discussion on the design of this classification. Individual fracture mapping in these regions regarding severity, fragmentation, displacement of the fragment or bone defect is addressed in a more detailed level 3 system in the subsequent articles.
RESUMO
This tutorial outlines the details of the AOCMF image-based classification system for fractures of the mandibular arch (i.e. the non-condylar mandible) at the precision level 3. It is the logical expansion of the fracture allocation to topographic mandibular sites outlined in level 2, and is based on three-dimensional (3D) imaging techniques/computed tomography (CT)/cone beam CT). Level 3 allows an anatomical description of the individual conditions of the mandibular arch such as the preinjury dental state and the degree of alveolar atrophy. Trauma sequelae are then addressed: (1) tooth injuries and periodontal trauma, (2) fracture involvement of the alveolar process, (3) the degree of fracture fragmentation in three categories (none, minor, and major), and (4) the presence of bone loss. The grading of fragmentation needs a 3D evaluation of the fracture area, allowing visualization of the outer and inner mandibular cortices. To document these fracture features beyond topography the alphanumeric codes are supplied with distinctive appendices. This level 3 tutorial is accompanied by a brief survey of the peculiarities of the edentulous atrophic mandible. Illustrations and a few case examples serve as instruction and reference to improve the understanding and application of the presented features.
RESUMO
This tutorial outlines the details of the AOCMF image-based classification system for fractures of the midface at the precision level 3. The topography of the different midface regions (central midface-upper central midface, intermediate central midface, lower central midface-incorporating the naso-orbito-ethmoid region; lateral midface-zygoma and zygomatic arch, palate) is subdivided in much greater detail than in level 2 going beyond the Le Fort fracture types and its analogs. The level 3 midface classification system is presented along with guidelines to precisely delineate the fracture patterns in these specific subregions. It is easy to plot common fracture entities, such as nasal and naso-orbito-ethmoid, and their variants due to the refined structural layout of the subregions. As a key attribute, this focused approach permits to document the occurrence of fragmentation (i.e., single vs. multiple fracture lines), displacement, and bone loss. Moreover, the preinjury dental state and the degree of alveolar atrophy in edentulous maxillary regions can be recorded. On the basis of these individual features, tooth injuries, periodontal trauma, and fracture involvement of the alveolar process can be assessed. Coding rules are given to set up a distinctive formula for typical midface fractures and their combinations. The instructions and illustrations are elucidated by a series of radiographic imaging examples. A critical appraisal of the design of this level 3 midface classification is made.
RESUMO
The AOCMF Classification Group developed a hierarchical three-level craniomaxillofacial classification system with increasing level of complexity and details. Within the midface (level 1 code 92), the level 2 system describes the location of the fractures within defined regions in the central and lateral midface including the internal orbit. This tutorial outlines the level 3 detailed classification system for fractures of the orbit. It depicts the orbital fractures according to the subregions defined as orbital rims, anterior orbital walls, midorbit, and apex. The system allows documentation of the involvement of specific orbital structures such as inferior orbital fissure, internal orbital buttress, the greater wing of sphenoid, lacrimal bone, superior orbital fissure, and optic canal. The classification system is presented along with rules for fracture location and coding, a series of case examples with clinical imaging and a general discussion on the design of this classification.
RESUMO
The AOCMF Classification Group developed a hierarchical three-level craniomaxillofacial (CMF) fracture classification system. The fundamental level 1 distinguishes four major anatomical units including the mandible (code 91), midface (code 92), skull base (code 93) and cranial vault (code 94); level 2 relates to the location of the fractures within defined topographical regions within each units; level 3 relates to fracture morphology in these regions regarding fragmentation, displacement, and bone defects, as well as the involvement of specific anatomical structures. The resulting CMF classification system has been implemented into AO comprehensive injury automatic classifier (AOCOIAC) software allowing for fracture classification as well as clinical documentation of individual cases including a selected sample of diagnostic images. This tutorial highlights the main features of the software. In addition, a series of illustrative case examples is made available electronically for viewing and editing.
RESUMO
The AOCMF Classification Group developed a hierarchical three-level craniomaxillofacial (CMF) classification system with increasing level of complexity and details. The basic level 1 system differentiates fracture location in the mandible (code 91), midface (code 92), skull base (code 93), and cranial vault (code 94); the levels 2 and 3 focus on defining fracture location and morphology within more detailed regions and subregions. Correct imaging acquisition, systematic analysis, and interpretation according to the anatomic and surgical relevant structures in the CMF regions are essential for an accurate, reproducible, and comprehensive diagnosis of CMF fractures using that system. Basic principles for radiographic diagnosis are based on conventional plain films, multidetector computed tomography, and magnetic resonance imaging. In this tutorial, the radiological issues according to each level of the classification are described.
RESUMO
PURPOSE: To compare the magnetic resonance (MR) imaging findings in patients with acute whiplash injury with those in matched control subjects. MATERIALS AND METHODS: In a prospective multicenter controlled study, from 2005 to 2008, 100 consecutive patients underwent 1.5-T MR imaging examinations of the cervical spine within 48 hours after a motor vehicle accident. Findings in these patients were compared in a blinded fashion with those in 100 age- and sex-matched healthy control subjects. Four blinded independent readers assessed the presence of occult vertebral body and facet fractures, vertebral body and facet contusions, intervertebral disk herniations, ligamentum nuchae strains, ligamentum nuchae tears, muscle strains or tears, and perimuscular fluid. Accuracy (as compared with clinical findings) and interobserver reliability were calculated. RESULTS: Accuracy of MR imaging and interreader reliability were generally poor (sensitivity, 0.328; specificity, 0.728; positive and negative likelihood ratios, 1.283 and 1.084, respectively). MR imaging findings significantly associated with whiplash injuries were occult fracture (P<.01), bone marrow contusion of the vertebral body (P=.01), muscle strain (P<.01) or tear (P<.01), and the presence of perimuscular fluid (P<.01). While 10 findings thought to be specific for whiplash trauma were significantly (P<.01) more frequent in patients (507 observations), they were also regularly found in healthy control subjects (237 observations). There were no serious occult injuries that required immediate therapy. CONCLUSION: MR imaging at 1.5 T reveals only limited evidence of specific changes to the cervical spine and the surrounding tissues in patients with acute symptomatic whiplash injury compared with healthy control subjects.
Assuntos
Vértebras Cervicais/lesões , Vértebras Cervicais/patologia , Imageamento por Ressonância Magnética/métodos , Traumatismos em Chicotada/patologia , Acidentes de Trânsito , Doença Aguda , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Variações Dependentes do Observador , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Método Simples-Cego , Adulto JovemRESUMO
OBJECTIVE: To study the emergent role of computed tomography (CT) in the evaluation of ancient human dental remains. METHODS: We conducted a paleoradiologic study of the skeletal remains of 4 individuals dating from the Pliocene to the Medieval Period. The specialized software used permitted comprehensive analyses of the bone structures of the dental remains and the performing of three-dimensional stereolithographic reconstructions. RESULTS: Paleoradiology helps demonstrate the detailed anatomy of fossil specimens, which permitted us to assign 1 of the specimens that we studied to the genus Homo, and not Australopithecus. Tooth and mandibular disease were identified in 2 specimens. CONCLUSION: CT is an essential noninvasive and nondestructive tool for the evaluation of human dental remains.
Assuntos
Hominidae , Paleodontologia/métodos , Tomografia Computadorizada por Raios X/métodos , Animais , Antropologia Física , História Antiga , História Medieval , Humanos , Imageamento Tridimensional , Paleopatologia/métodosRESUMO
A comprehensive classification of midfacial/craniofacial fractures, based on two- and three-dimensional computed tomography (2D and 3D-CT) is presented. We performed a postmortem analysis of 24 patients who had died from trauma with signs of craniofacial fractures, based on 2D and 3D-CT studies with pathoanatomical findings. In addition, CT findings for 100 patients with craniofacial injuries requiring an emergency CT were correlated with surgical findings and follow-up results. On the basis of the analysis of a total of 377 fractures a classification system is proposed. The system is based on the use of the AO/ASIF (Arbeitsgemeinschaft für Osteosynthesefragen/Association for the Study of Internal Fixation) scheme, defining three types (A, B, C), three groups within each type (e.g. A1, A2, A3) and three subgroups within each group (e.g. A1.1, A1.2, A1.3) with increasing severity from A1.1 (lowest) to C3.3 (highest). The craniofacial region is divided into three units: the lower midface (I), the upper midface (II) and the craniobasal-facial unit (III). Lateral and central fractures are also distinguished. Type A fractures are non-displaced fractures, type B are displaced fractures and type C are complex/defect fractures. Groups A1, B1 and C1 comprise fractures of an isolated unit; groups A2, B2 and C2, combined fractures without involvement of the skull base; and groups A3, B3 and C3 are those combined fractures with involvement of the skull base. A correlation between the severity of the fracture and (i). the number of posttraumatic functional limitations (Spearman rank test, correlation coefficient r=0.42), (ii). the need for bone grafting or dural plastic (r=0.39) and (iii). facial asymmetry (r=0.37), was observed. The proposed classification system allows standardised documentation of midfacial and craniofacial fractures, including those not precisely defined by the Le Fort classification scheme.