Surfactant-Assisted Wet Granulation-Based Matrix Tablets without Exceptional Additives: Prolonging Systemic Exposure of Model BCS Class II Ketoprofen.

The present study was aimed to ameliorate the issue of solubility and thereby, bioavailability of ketoprofen, a BCS Class II drug. The sustained release matrix tablets (MT) were prepared using surfactant-assisted wet granulation (SAWG) with 1-5% of different surfactants. The tablet characteristics were within the compendial limits. The selected sustained release-compliant matrix tablet formulation containing granules prepared using 3% Soluplus® (MT2) released the drug by swelling-erosion. In human volunteers, MT2 attained the maximum plasma concentration (Cmax) of 5.72µg /ml ± 0.30 h, time to Cmax (Tmax) of 5.56 ± 0.30 h and maintained the plasma concentration above its minimum effective concentration (MEC), 0.7 µg.ml-1 till 24h. A control formulation, prepared from granules without surfactant (MT16), promptly attained Cmax of 9.62 ± 0.76 µg/ml within 1h but rapidly declined to below MEC in 8h. Area under the curve from initial point to infinity (AUC0-∞) of MT2 (78.65 ± 7.64 µg.h.ml-1) was 2.29 folds higher than 34.39 ± 3.06 µg.h.ml-1 of MT16. With decreased Cmax, increased AUC0-∞, delayed Tmax and retained ketoprofen concentration above MEC for longer time, MT2 corresponded with the in-vitro sustained drug release characteristic. There is a likelihood of administration of once-a-day single dose of MT2 without plasma fluctuations, expected from two doses of MT16. SAWG helped developing a swellable-erodible sustained release matrix tablet formulation of ketoprofen with the desired biopharmaceutical and pharmacokinetics properties, merely by addition of Soluplus® in granules and without incorporation of any special ingredients or the major manipulation of the formulative ingredients in the formulation.

Industrial prospects on regulatory gaps and barriers in pharmaceutical exports and their counteraction: Local experiential with global implication.

BACKGROUND: The pharmaceutical sector in Pakistan has grown over a period with export potential, however, there are certain barriers in the framework that regulate the growth and export of domestically manufactured pharmaceuticals. The purpose of this study was to highlight the current challenges that hinder the export of pharmaceuticals, especially to the countries with stringent regulatory authorities (SRA), as perceived by the domestic pharmaceutical industry experts, and to highlight the facilitators that may help to resolve the identified challenges. METHODS: In a qualitative study, the data were collected from the consented experts from the pharmaceutical industries in Lahore, Karachi, Peshawar, and Quetta. Industrial experts with a minimum of 10 years of experience and who were serving at managerial levels or above were recruited through purposive sampling. The semi-structured interviews were conducted for the collection of data from industrial experts. Thematic content analysis was applied to conclude the data. RESULTS: Data analysis generated 4 themes and 16 codes. The export of pharmaceuticals, despite having greater potential was regarded as poor, which was attributed to the following: (a) inadequate industrial research and development, particularly on new molecules (b) non-compliance with the cGMP standards, (c) absence of high-tech equipment, (d) unwillingness of the pharmaceutical companies for bioequivalence studies on their generics, (e) unavailability of locally manufactured active pharmaceutical ingredients, (f) disruption in the supply of imported raw material, (g) poor international market perception about local pharmaceutical products and (h) lack of support from regulatory in process expedition. The respondents also suggested the measures for overcoming the above challenges to boost the export of domestic pharmaceuticals and expand their international market share in countries with SRA. CONCLUSION: Export from Pakistan to the SRA countries can be enhanced with mandatory bioequivalence studies during generic registration. The pharmaceuticals export could effectively contribute to the national economy.

Development and characterisation of buccal dispersible film, syrup and effervescent granules of extemporaneous antigout remedy.

Homemade medicinal remedies used to treat both acute and chronic ailments for centuries need to be transformed into modern evidence-based dosage forms. Therefore, the present study aimed to develop buccal dispersible film, syrup and effervescent granules of an extemporaneous antigout homemade remedy. The dosage forms were prepared using holistic remedy (HR) as an active entity and excipients masking disagreeable features. The dosage forms and HR were subjected to physicochemical evaluation, and standardised by a reversed-phase HPLC method using chlorogenic acid, caffeic acid, vanillin, and ferulic acid as analytical standards. The standardised dosage forms were investigated for antigout activity using an appropriate model. The dosage forms were found to be physically elegant and phytochemically aligned with HR. The developed dosage forms contained the selected markers and possessed antigout activity. Hence, these standardised and evidence-based dosage forms may have wider acceptance in the market compared to HR.

Amelioration of tableting properties and dissolution rate of naproxen co-grinded with nicotinamide: preparation and characterization of co-grinded mixture.

OBJECTIVE AND SIGNIFICANCE: Reducing the dimensions, when other additives are present, shows potential as a method to improve the dissolution and solubility of biopharmaceutical classification system class II drugs that have poor solubility. In this investigation, the process involved grinding naproxen with nicotinamide with the aim of improving solubility and the rate of dissolution. METHODS: Naproxen was subjected to co-milling with urea, dimethylurea, and nicotinamide using a planetary ball mill for a duration of 90 min, maintaining a 1:1 molar ratio for the excipients (screening studies). The co-milled combinations, naproxen in its pure milled form, and a physical mixture were subjected to analysis using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), and solubility assessment. The mixture displaying the highest solubility (naproxen-nicotinamide) was chosen for further investigation, involving testing for intrinsic dissolution rate (IDR) and Fourier-transform infrared spectroscopy (FTIR) after co-milling for both 90 and 480 min. RESULTS AND CONCLUSION: The co-milled combination, denoted as S-3b and consisting of the most substantial ratio of nicotinamide to naproxen at 1:3, subjected to 480 min of milling, exhibited a remarkable 45-fold increase in solubility and a 9-fold increase in IDR. XRPD analysis of the co-milled samples demonstrated no amorphization, while SEM images portrayed the aggregates of naproxen with nicotinamide. FTIR outcomes negate the presence of any chemical interactions between the components. The co-milled sample exhibiting the highest solubility and IDR was used to create a tablet, which was then subjected to comprehensive evaluation for standard attributes. The results revealed improved compressibility and dissolution properties.

Academia-pharmaceutical industry linkage: An academic perspective.

Background: The pharmaceutical sector in Pakistan has grown over a period, however, there are several barriers in the framework governing the growth of the country's pharmaceuticals. The lack of academia-industry linkage (AIL) is among the critical barriers; hence the focus of the study is to find out the reasons for the lack in the above collaboration. Understanding barriers may help their redressal. Method: This qualitative phenomenology-based study has been conducted in the most prominent pharmacy institutes, located in Lahore, Islamabad, Peshawar, Sargodha, and Quetta. Academic participants, with a minimum experience of 10 years and designation of assistant professor or above were recruited with a two-stage selection process, purposive sampling and snowball sampling. The data were collected using semi-structured interviews with academic experts. Thematic content analysis was employed to conclude the data. Results: Analysis of data yielded 8 themes with 18 codes. The main reasons for neglected AIL were explained by a partial or complete lack of industrial research and development activities. Other key factors for the scarcity of AILs were the lack of positive attitude from both industry and academia, applied research in academics, and the research and development of the new molecules in the pharmaceutical industry. Support by the government and the drug regulatory authority of Pakistan in terms of regulatory and academic policies was also perceived to be absent. New horizons in research and development could be opened by providing applied research to industry, including but not limited to new molecule development. Conclusion: Academia-industry linkage could be boosted with government-backed funded projects and policies. Academia should focus on the industrial-demanded applied research.

Investigation of smoking on the antiplatelet response to clopidogrel: Unravelling the smoker's paradox.

The intricate relationship between smoking and the effects of the antiplatelet drug clopidogrel has been termed the "smoker's paradox". This paradox details the enhanced efficacy of clopidogrel in smokers compared to non-smokers. This review begins with an exploration of the proposed mechanisms of the smoker's paradox, particularly drawing attention to the induction of cytochrome P450 (CYP) isoenzymes via tobacco smoke, specifically the enzymes CYP1A2 and CYP2C19. Moreover, an investigation of the effects of genetic variability on the smoker's paradox was undertaken from both clinical and molecular perspectives, delving into the effects of ethnicity and genetic polymorphisms. The intriguing role of CYP1A2 genotypes and the response to clopidogrel in smoking and non-smoking populations was examined conferring insight into the individuality rather than universality of the smoker's paradox. CYP1A2 induction is hypothesised to elucidate the potency of smoking in exerting a counteracting effect in those taking clopidogrel who possess CYP2C19 loss of function polymorphisms. Furthermore, we assess the comparative efficacies of clopidogrel and other antiplatelet agents, namely prasugrel and ticagrelor. Studies indicated that prasugrel and ticagrelor provided a more consistent effect and further reduced platelet reactivity compared to clopidogrel within both smoking and non-smoking populations. Personalised dosing was another focus of the review considering patient comorbidities, genetic makeup, and smoking status with the objective of improving the antiplatelet response of those taking clopidogrel. In summation, this review provides insight into multiple areas of research concerning clopidogrel and the smoker's paradox taking into account proposed mechanisms, genetics, other antiplatelet agents, and personalised dosing.

Formulation and Evaluation of a Self-Microemulsifying Drug Delivery System of Raloxifene with Improved Solubility and Oral Bioavailability.

Poor aqueous solubility and dissolution limit the oral bioavailability of Biopharmaceutics Classification System (BCS) class II drugs. In this study, we aimed to improve the aqueous solubility and oral bioavailability of raloxifene hydrochloride (RLX), a BCS class II drug, using a self-microemulsifying drug delivery system (SMEDDS). Based on the solubilities of RLX, Capryol 90, Tween 80/Labrasol ALF, and polyethylene glycol 400 (PEG-400) were selected as the oil, surfactant mixture, and cosurfactant, respectively. Pseudo-ternary phase diagrams were constructed to determine the optimal composition (Capryol 90/Tween 80/Labrasol ALF/PEG-400 in 150/478.1/159.4/212.5 volume ratio) for RLX-SMEDDS with a small droplet size (147.1 nm) and stable microemulsification (PDI: 0.227). Differential scanning calorimetry and powder X-ray diffraction of lyophilized RLX-SMEDDS revealed the loss of crystallinity, suggesting a molecularly dissolved or amorphous state of RLX in the SMEDDS formulation. Moreover, RLX-SMEDDS exhibited significantly higher saturation solubility and dissolution rate in water, simulated gastric fluid (pH 1.2), and simulated intestinal fluid (pH 6.8) than RLX powder. Additionally, oral administration of RLX-SMEDDS to female rats resulted in 1.94- and 1.80-fold higher area under the curve and maximum plasma concentration, respectively, than the RLX dispersion. Collectively, our findings suggest SMEDDS is a promising oral formulation to enhance the therapeutic efficacy of RLX.

Novel Hydrophilic Oligomer-Crosslinked Gelatin-Based Hydrogels for Biomedical Applications.

Gelatin-based hydrogels have shown good injectability and biocompatibility and have been broadly used for drug delivery and tissue regeneration. However, their low mechanical strengths and fast degradation rates must be modified for long-term implantation applications. With an aim to develop mechanically stable hydrogels, reactive anhydride-based oligomers were developed and used to fabricate gelatin-based crosslinked hydrogels in this study. A cascade of hydrophilic oligomers containing reactive anhydride groups was synthesized by free radical polymerization. These oligomers varied in degree of reactivity, comonomer composition, and showed low molecular weights (Mn < 5 kDa). The reactive oligomers were utilized to fabricate hydrogels that differed in their mechanical strengths and degradation profiles. These formulations exhibited good cytocompatibility with human adipose tissue-derived stem cells (hADCs). In conclusion, the reactive MA-containing oligomers were successfully synthesized and utilized for the development of oligomer-crosslinked hydrogels. Such oligomer-crosslinked gelatin-based hydrogels hold promise as drug or cell carriers in various biomedical applications.

Development and DoE-ANN based optimization of novel swellable matrix-diffusible doxorubicin loaded zinc oxide nanoflowers using sonochemical-precipitation method.

This research aimed to acquire doxorubicin loaded zinc oxide nanoflowers (DOX-ZnO-NFs) for intracellular drug cargo possessing a synergistic in-vitro anticancer activity with minimal toxicity. Zinc is the main inorganic metallic component of various enzyme systems and has the possibility of fabrication into the diverse nano-structural forms. An easy absorption and extensive tissue distribution of zinc have made it unique candidate for drug delivery system. Hence, the zinc oxide nanoflowers were prepared with sonochemical-precipitation. The developed system was characterized using the reported methods and was optimized employing design of experiment, coupled with artificial neural network approach. The optimized nanoflowers (DOX-ZnO-NFV) were anionic with particle size of 24 ± 0.05 nm, polydispersity index of <0.5, a zeta potential of -25.68 ± 0.16 mV, yield of 87.40% and encapsulation efficiency of 85.25%. DOX-ZNO-NFV depicted sustained DOX release, around 65.413% release in 30 h at pH 7.4 and assumed Weibull model with its derived parameters, a and b of 22.77 and 0.918, respectively. DOX-ZnO-NFV remained stable on storage for 3 months at 4° C/50% RH and 25° C/60% RH. DOX-ZnO-NFV displayed a zone of inhibition of 13.50 ± 1.25 mm and 25.50 ± 0.98 mm, respectively against gram-positive Staphylococcus aureus and gram-negative Escherichia coli strains, presenting the nanoflowers as self-preservative. DOX-ZnO-NFV exhibited higher in-vitro anticancer activity in Henrietta Lacks cell line, with least hemolysis compared to the free DOX and ZnO-NF. Thus, doxorubicin loaded zinc oxide nanoflowers envisioned to act as better chemotherapeutic cargos with the maximize anticancer activity and minimal toxicity.

Influence of Quercetin Pretreatment on Pharmacokinetics of Warfarin in Rats.

BACKGROUND: Warfarin (WAR) is an anticoagulant with a narrow therapeutic index and is principally metabolized by CYP3A4 and CYP2C9 enzymes. The inhibitors of these enzymes may alter the systemic exposure to WAR. Quercetin (QUE), a bioflavonoid, may modify the bioavailability of drugs used concurrently by inhibiting CYP3A4, CYP2C8, CYP2C9, CYP1A2, and Pglycoprotein (P-gp). OBJECTIVE: The current study scrutinized the influence of QUE on WAR pharmacokinetics in rats. METHOD: QUE was orally administered to animals for 14 consecutive days, followed by WAR as a single oral dose on the 15th day in the pre-treatment group. The co-administration group received a single dose of QUE and WAR concomitantly. Only carboxymethylcellulose (CMC) 0.5% was administered as a vehicle to control group. RESULTS: In the pre-treated group, WAR's Cmax was increased by 30.43%, AUC0-∞ by 62.94%, and t1/2 by 10.54%, while Cl decreased by 41.35%, relative to control. In co-administered animals, WAR's Cmax increased by 10.98%, AUC0-∞ by 20.20%, and t1/2 by 8.87%, while Cl declined by 16.40%. CONCLUSION: QUE alters the pharmacokinetics of WAR, warranting possibly WAR dose adjustment after confirmatory clinical investigations, specifically in patients with thrombotic disorders and a pre-treatment history of QUE or its product.

Safety and Pharmaceutical Evaluation of a Novel Natural Polymer, Ocicum, as Solubility and Dissolution Enhancer in Solid Dispersion.

Plant mucilages are commonly employed as excipients in pharmaceutical manufacturing. Ocimum basilicum (Lamiaceae family), a source of hydrophilic mucilage referred herein as Ocicum, was evaluated for the solubility enhancer of a model drug, aceclofenac, in solid dispersions prepared using different methods. Polymer was extracted from O. basilicum and solid dispersions of aceclofenac were fabricated with Ocicum or Poloxamer 407 using polymer-to-drug ratios of 1:1, 1:2 and 1:3 utilizing solvent evaporation, lyophilization and melt methods. Ocicum was evaluated for its safety via acute toxicity study including different biochemical and hematological parameters including liver and kidney profiles. Moreover, different characterization studies including melting-point, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and differential thermal analysis (TGA) were used for evaluation of polymer and solid dispersions. Furthermore, solubility and dissolution studies were performed to confirm solubility enhancement. Ocicum was found to be safer, and different characterization studies confirmed the purity of the compounds. In addition, Ocicum exhibited up to 6.27-fold enhanced solubility as compared to pure aceclofenac; similarly, 4.51-fold increased solubility by the synthetic polymer in their respective solid dispersions was shown. Furthermore, Ocicum-based solid dispersions showed substantial improvement in dissolution of aceclofenac. Therefore, it can be concluded from the above-mentioned results that Ocicum might be used as an economical natural oral delivery carrier alternative to the synthetic polymers.

Development of Optimized Sumatriptan-Prochlorperazine Combined Orodispersible Films Without Disintegrant: in vitro, ex vivo and in vivo Characterization.

Sumatriptan succinate and prochlorperazine maleate are a clinically proven combination for treating migraine and associated nausea and vomiting. Classical oral dosage forms are not frequently workable in migraine because of the associated nausea/vomiting, and no effective fixed dose combination is available. Thus, the aim of the study was to optimize a combined sumatriptan-prochlorperazine orodispersible film for rapid release of drugs. Orodispersible films were prepared by solvent casting method using varied amounts of polyvinyl alcohol and glycerol as film former and plasticizer, respectively, along with fixed levels of other ingredients employing central composite design. The optimum film (VF) demonstrated disintegration and total dispersion times as 21 s and 2.3 min, respectively. Tensile strength and Young's modulus were 8.86 ± 0.37 MPa and 24.15 ± 0.07 MPa, respectively. The in vitro T80% of both drugs from the ODF was achieved within 4 min. The film was palatable and disintegrated in 2 min in buccal cavity of human volunteers. Permeation study through goat mucosa demonstrated 100% permeation of both drugs within 15 min. X-Ray diffraction and differential scanning calorimetry supported drugs being amorphous and Fourier transform infrared demonstrated drug-excipient compatibility in optimized film. A judicious combination of sumatriptan succinate and prochlorperazine maleate could be prepared in orodispersible films for the possible relief of migraine.

In silico, in vivo enzymatic, non-enzymatic toxicity and antioxidant activity of a heterocyclic compound: 5-Benzyl -1, 3, 4-oxadiazole-2-thiol, a potential drug candidate.

The present study aimed to investigate the enzymetic, non-enzymetic toxicity and antioxidant potential of a drug candidate 5-Benzyl-1,3,4-Oxadiazole-2-Thiol(OXPA) using computational tools and in vivo models. The binding pattern of it, with different toxicity/oxidative enzymes was predicted using software pkCSM, Protox- II, LAZAR, Mcule 1-Click Docking 3D-Ligand binding Site and best score obtained used as an evaluating criterion. After acute oral toxicity, in vivo. antioxidant and hepato protective activity was investigated on male wistar rats, segregated into four groups as control (NS), toxic (INH-RIF), standard (Silymerin) and sample (OXPA, 100mg/Kg) for 21days. Level of antioxidant enzymes / histopathology and serum biochemical parameters in liver and blood of treated rats was assessed by using scientific tools. In silico study reveal no profound toxicity parameters however, LD50 found to be 560mg/Kg while in vivo study declared it safe till 1000mg/Kg, as having no toxicity symptoms. Molecular interaction score with GTH reductase, s-transferase and significant in vivo antioxidant effect on catalase, SOD, TBARS enzymes and histopathological assessment, declare OXPA a good antioxidant having significant (P< 0.05) hepato protective activity. Results of in silico, in vivo studies declare the propensity of 5-Benzyl-1, 3, 4-oxadiazole-2-thiol as potential antioxidant, for further investigations as a drug.

Development of Simple Dissolution Methods for Felodipine and Combined Amlodipine Besylate-Indapamide Extended Release Tablets without Stationary (Felodipine) Basket.

BACKGROUND: The dissolution method for certain drugs needs specialized conditions. Dissolution testing for felodipine extended release (ER) tablets (Plendil® 5 mg) and amlodipine-indapamide fixed dose (Natrilam®, 5/1.5 mg) ER tablets requires the use of a stationary (felodipine) basket in USP Apparatus II. OBJECTIVE: The study aimed to develop simple methods for Plendil® and Natrilam® without the use of a felodipine basket. METHODS: The dissolution profiles obtained from different media and paddle speeds were used to compute miscellaneous dissolution parameters and were compared to those obtained from standard (existing) methods using a felodipine basket. RESULTS: The f1, f2, and bootstrap f2 (5th % percentile) values for Plendil® 2.47, 88.17, and 54.62, respectively, and all other dissolution factors revealed similarity between standard and the selected test method with 1% Tween 20 at 50 rpm. For Natrilam®, f1 and f2 and bootstrap f2 5.13, 72.92, and 62.67, respectively, and all other dissolution parameters showed similarity of the standard and selected test method using 0.1N HCl media having 0.38 gm/L EDTA with a sinker at 100 rpm. Release of products assumed zero-order and Weibull model, respectively. CONCLUSION: Test dissolution methods for Plendil® and Natrilam® tablets produced equivalent dissolution profiles compared to their respective standard methods with stationary basket USP Apparatus II.

Simultaneous quantification of sumatriptan succinate and prochlorperazine maleate in orodispersible films using two validated UV-spectroscopic methods.

The study aimed at simultaneous quantification of sumatriptan succinate (SUM) and prochlorperazine maleate (PCP) in an orodispersible film using two validated spectroscopic methods viz. simultaneous equation (Method I) and the Q-absorption ratio (Method II). The Method I involved measurement of absorbances at λmax of both drugs while in Method II, absorbances were measured at isosbestic wavelength and λmax of one of the two components. Method validation were accomplished as per the ICH guidelines. A 1:1 mixture of the drugs and an orodispersible film (ODF) containing these drugs were assayed by both methods. The absorbance data of SUM and PCP in both methods were linear at respective wavelengths with correlation coefficient values >0.995. Both methods were precise as % RSD in repeatability, interday and intraday precision was less than 2. The estimation of SUM and PCP from the film dosage form by method I was104.74% and 98.34% and by method II was 103.45% and 98.85%, respectively, with a standard deviation <2. The study concluded that both the methods were simple, reliable and robust and can be applied successfully for the simultaneous quantification of SUM and PCP in mixture and orodispersible film dosage form.

Prediction of CYP-mediated silybin A-losartan pharmacokinetic interactions using physiological based pharmacokinetic modeling.

The concomitant use of herbal products and synthetic drugs necessitates the assessment of their interaction potentials. The herbal hepatoprotective medicine, silybin A inhibits cytochrome P450 (CYP) 2C9 and 3A4 enzymes, thus, may interact with the drugs that are substrates of CYP2C9 and 3A4, such as losartan. The three most prominent genotypes, expressed by CYP2C9 are the CYP2C9*1/*1, CYP2C9*1/*2 and CYP2C9*1/*3. This study aimed to assess silybin A-losartan interaction in different CYP2C9 genotypes using physiological-based pharmacokinetic (PBPK) model approach. The individual PBPK models for silybin A and losartan were developed using PK-Sim®. Losartan pharmacokinetics was predicted with or without co-administration of silybin A in individuals of different CYP2C9 genotypes to find herbal-drug interaction. The predicted drug plasma curves and pharmacokinetic parameters were optimized using parameter identification tool and were compared with reported pharmacokinetic parameters from the published clinical studies for model validation. The silybin-losartan interactions were predicted by change in area under the curve (AUC) and peak systemic concentration (Cmax). The co-treatment of silybin A, 420 mg/24 h (140 mg/8 h) with losartan 50 mg/24 h, exhibited a genotype-dependent change in the losartan's AUC and Cmax. In CYP 2C9*1/*1 genotype, AUC and Cmax of losartan were increased 1.16 and 1.37 folds, respectively falling in a range stipulated for negligible interaction. Increase in AUC and Cmax by 0.873 and 0.294 folds, respectively in CYP2C9*1/*3 after co-administration of silybin A exhibited a minor interaction with losartan. However, in individuals with CYP2C9*1/*2 genotype, the losartan's AUC and Cmax were decreased by 0.01 folds, manifesting a moderate interaction. Hence, in CYP2C9*1/*1 and CYP2C9*1/*3 genotypes, silybin A is a weak CYP inhibitor for losartan while in CYP2C9*1/*2 genotype, the co-administration of silybin consequents into a moderate pharmacokinetic interaction with losartan.

Enhanced Mefenamic Acid Release from Poloxamer-Silicon Dioxide Gel Filled in Hard Gelatin Capsules - An Application of Liquid Semisolid Matrix Technology for Insoluble Drug.

INTRODUCTION: Liquid Semisolid Matrix (LSSM) technology involves the filling of drugmixed gel in hard gelatin capsules for different applications. METHODS: In continuation of our previous work on LSSM technology, 10% (w/w) of practically insoluble model drug, mefenamic acid was incorporated in gels of different poloxamers with 8% (w/w) SiO2. RESULTS: Gels exhibited plasticity or pseudoplasticity along thixotropy at 2 and 24 h enabling their easy filling into hard gelatin capsules without content seepage. Mefenamic acid gels prepared with L64 and L92 maintained their apparent viscosities for the study period of one month. Around 100% mefenamic acid was released within 90 min from L64- and in 150 min from L92-SiO2 gels, both with first-order kinetics. In 12 month long-term stability studies, only mefenamic acid-L64- SiO gel at 30°C/65% RH indicated dispersion stability with similar rheology and release pattern to that at 2, 24 and 30 days. No chemical drug-polymer interactions were found in FTIR. CONCLUSION: The release of practically insoluble mefenamic acid could be enhanced from gel formulated with L64 and SiO2.

Precise and Sensitive Ambient Temperature Based Analytical Colorimetric Method for Pregabalin

Abstract Pregabalin, a GABA analogue is used to treat epilepsy and neuropathic pain. The drug poses problems in analytical quantification when estimated at a shorter UV wavelength. The expensive and non-repetitive reported analytical methods necessitate the utility and development of an accurate, precise, repetitive, simple and highly sensitive colorimetric method for pregabalin in solution as well as sustained release mini matrices. Pregabalin (having primary amino group) was derivatized at alkaline pH of mixture with optimized ninhydrin solution at ambient temperature (25oC). The ninhydrin-pregabalin derivatized complex (Ruhemann's Purple) was analyzed for drug concentration at absorption maximum (λmax) of 570nm. The linearity was observed in the concentration range of 5-150 µg/mL with coefficient of correlation, 0.998. The developed analytical method was validated according to ICH guidelines and proved to be highly sensitive (LOD 0.917µg/mL, LOQ 3.055µg/mL), with good inter-day as well as intra-day accuracy and precision as 4.65% and 3.75%, respectively. The proposed method was proved to be a simple, sensitive, precise and accurate for the estimation of the minute concentrations of pregabalin in pure form and the developed formulations. Results verified that the proposed method could determine pregabalin at the ambient temperature without requiring high temperatures used in the existing methods. It was concluded that developed method was easier and more suitable for analysis of pregabalin in quality control of commercial preparations

In vivo antioxidant potential of fruit mucilage from two varieties of Cucumis melo subsp. agrestis against oxidative stress induced toxicity.

To evaluate in-vivo antioxidant potential of fruit mucilage from Cucumis melo variety momordica (PM) and variety agrestis (KM) using rats as experimental animals, the fruits were collected, identified, dried and pulverized. Mucilages were isolated from the fruit powders by microwave-assisted method. Aqueous extracts obtained were filtered to remove fruit pulp. Each filtrate was centrifuged at 4000xg rpm for 15 min. Each supernatant was precipitated with 3 volumes of 95% ethanol and maintained overnight at 4°C. These precipitates were filtered and lyophilized. In vivo antioxidant activity was determined using rats for 14 days. Paracetamol (75mg/Kg, i.p.) for inducing oxidative stress and Vitamin C & Vitamin E (200mg/Kg each, p.o.) as standard treatment were used. PM and KM were given in 500mg/Kg and 1000mg/Kg, p.o. doses in separate groups. SOD, MDA, GSH and CAT levels were estimated in organs (liver, kidney, heart, brain) of all groups using standard procedures. Toxic control showed prominent toxicity in the liver. The levels of GSH, CAT and SOD were raised and MDA levels were reduced in all organs of test and standard groups. The levels of antioxidant biomarkers varied in all remaining groups. The overall results are significant suggesting strong antioxidant potential of PM and KM.

Development and validation of single analytical HPLC method for determination of flavoxate HCl in bulk, tablets and biological fluids.

A simple, sensitive and precise high performance liquid chromatographic (HPLC) method was developed and validated for determination of flavoxate HCI in raw material, tablets and biological fluids. The method followed by using the Zorbax XDB-C18 column containing Di-isobutyl n-octadeceylsilane (4.6mm×150mm, 5µm). The mobile phase consisted of acetonitrile: methanol: 0.15M sodium perchlorate (17:35:48 v/v) having pH 3. UV detection was carried out at 229nm at 40°C. Results indicated that the method has successfully established and validated in accordance with ICH guidelines acceptance criteria for linearity (0.03-7.5µg), accuracy (101.18-101.28%), robustness of column age and column lot (peak area %CV<0.04, purity %CV< 0.006) and robustness of HPLC condition (%CV<0.02), precision (intra and inter day precision assay, %CV values for peak area and percent purity of flavoxate HCl<2%) and system suitability parameters. The average noise, theoretical LOD and LOQ were found to be 0.01 mAU, 0.03 mAU and 0.6ng, respectively. The Coefficient of determination (r2) ranging from 0.03µg to 7.5µg, 0.99 which was within acceptable criteria of r2 & gt 0.99. The spiked recoveries of samples were 101.28, 101.18 and 101.18% respectively. All data revealed that this method can be used for in-vitro & in-vivo determination of flavoxate HCI in various pharmaceutical preparations.