Towards portable kits for on-site colorimetric detection of aqueous hydrazine using piperidine-thiophene-barbituric acid push-pull probe.

Owing to the carcinogenicity and environmental risks as well as the wide industrial use of hydrazine, we report herein a colorimetric probe for its ratiometric detection in pure water. The developed probe possesses push-pull architecture with 2-(piperidyn-1-yl)thiophene as the donor, N,N'-dibutylbarbituric as the acceptor, and butadiene as the spacer. In contrast to weak solvatochromic behavior in organic solvents, the probe showed distinct optical photophysical properties in water resulting from the formation of nanoscopic aggregates. The probe underwent pronounced spectral changes upon the addition of hydrazine including an 11.5-fold decrease in absorbance and ~2.4-fold fluorescence quenching. The mechanistic investigation revealed the rapid formation of hydrazone upon the interaction of the probe with hydrazine via retro-Knoevenagel reaction as confirmed experimentally and corroborated with DFT calculations. The induced colorimetric and fluorometric changes were utilized in hydrazine sensing with excellent selectivity over other biologically relevant analytes with a detection limit of 0.76 µM in aqueous media. The practical utility of the probe was assessed in real-life natural water samples, while we have also developed a cost-effective portable kit for the on-site hydrazine detection both in the solution and vapor phases.

Synthesis, photophysics and two-photon absorption of imidazole-centred tripodal chromophores.

Tripodal push-pull chromophores with D-(π-A)3 arrangement were synthesized using 1-methyl-2,4,5-triphenyl-1H-imidazole as a central electron donor, and their thermal, electrochemical, photophysical and non-linear optical properties were studied and corroborated with quantum-chemical calculations. Their facile synthesis involved Suzuki-Miyaura and Knoevenagel reactions, allowing the installation of various peripheral electron acceptors such as formyl, cyano, ester, trifluoromethyl and more complex moieties such as malonic/acetic acid derivatives, indan-1,3-dione and rhodanine. All phenyl rings appended at the central imidazole core were more or less twisted depending on the peripheral substitution. Although imidazole undergoes reversible one-electron oxidation, peripheral acceptors are reduced irreversibly in a multi-electron process. This behaviour is further seen as a variation of the LUMO, while the HOMO remained almost unaltered across the whole series. TD-DFT calculations revealed centrifugal charge transfer from the central imidazole to all C2, C4 and C5 branches occupied by the LUMO, LUMO+1 and LUMO+2. The HOMO-LUMO gap is tuneable within the range of 3.55-2.31 eV, while the longest-wavelength absorption/emission maxima were found within the broad range of 304-448/393-612 nm. Although the absorption spectra are solvent-independent, the emission depends strongly on the solvent polarity and the electron-withdrawing power of the peripheral acceptors. Extended chromophores with complex electron acceptors were investigated as two-photon absorbers, revealing relatively good cross-section values of up to 521 GM and a figure-of-merit (ΦF × Î´2PA) of around 190 GM.

Interfacial Distortion of Sb2Te3-Sb2Se3 Multilayers via Atomic Layer Deposition for Enhanced Thermoelectric Properties.

Atomic layer deposition (ALD) is an effective technique for depositing thin films with precise control of layer thickness and functional properties. In this work, Sb2Te3-Sb2Se3 nanostructures were synthesized using thermal ALD. A decrease in the Sb2Te3 layer thickness led to the emergence of distinct peaks from the Laue rings, indicative of a highly textured film structure with optimized crystallinity. Density functional theory simulations revealed that carrier redistribution occurs at the interface to establish charge equilibrium. By carefully optimizing the layer thicknesses, we achieved an obvious enhancement in the Seebeck coefficient, reaching a peak figure of merit (zT) value of 0.38 at room temperature. These investigations not only provide strong evidence for the potential of ALD manipulation to improve the electrical performance of metal chalcogenides but also offer valuable insights into achieving high performance in two-dimensional materials.

Second-order nonlinear optical properties of X-shaped pyrazine derivatives.

This work reports an investigation of the second-order NLO properties of two isomer series of X-shaped pyrazine derivatives, by means of HRS measurements and DFT calculations. The systems differ in the relative position of the donor and acceptor substituents with respect to the axis formed by the nitrogen atoms of the central pyrazine ring. Although the magnitude of the second harmonic signal is similar, HRS measurements revealed that the anisotropy of the NLO response strongly differs in the two chromophore series, the one of the 2,3-isomers being strikingly dipolar, while the one of the 2,6-isomers is mostly octupolar. The experimental observations are well supported by DFT calculations. In particular, the sum-over-states approach allows us to rationalize the different NLO anisotropies observed in the two isomer series through a detailed analysis of the symmetry of the low-lying excited states.

Construction of bi(hetero)aryls via dicyanopyrazine-mediated photochemical cross-coupling.

A photochemical cross-coupling protocol towards bi(hetero)aryls has been developed. The coupling reactions were mediated by dicyanopyrazine photoredox catalyst, while a photoinduced disproportionation process has been identified as an accompanying mechanism, especially for pyrrole derivatives. The developed method allows the cross-coupling of five-membered rings such as pyrrole, imidazole, thiazole and oxazole as well as various diazines (pyridine and pyrimidine) and benzene derivatives. A plausible mechanism of the reaction has also been disclosed. The practical application and relevance of the developed method were demonstrated by constructing an atorvastatin core or by the gradual functionalization of benzo[c][1,2,5]thiadiazole. In total, twenty-one bi(hetero)aryls were prepared in yields ranging from 19 to 95%.

Push-Pull Derivatives Based on 2,4'-Biphenylene Linker with Quinoxaline, [1,2,5]Oxadiazolo[3,4-B]Pyrazine and [1,2,5]Thiadiazolo[3,4-B]Pyrazine Electron Withdrawing Parts.

A series of novel V-shaped quinoxaline, [1,2,5]oxadiazolo[3,4-b]pyrazine and [1,2,5]thiadiazolo[3,4-b]pyrazine push-pull derivatives with 2,4'-biphenylene linker were designed and their electrochemical, photophysical and nonlinear optical properties were investigated. [1,2,5]Oxadiazolo[3,4-b]pyrazine is the stronger electron-withdrawing fragment as shown by electrochemical, and photophysical data. All compounds are emissive in a solid-state (from the cyan to red region of the spectrum) and quinoxaline derivatives are emissions in DCM solution. It has been found that quinoxaline derivatives demonstrate important solvatochromism and extra-large Stokes shifts, characteristic of twisted intramolecular charge transfer excited state as well as aggregation induced emission. The experimental conclusions have been justified by theoretical (TD-)DFT calculations.

The centrifugal spinning of vitamin doped natural gum fibers for skin regeneration.

The study investigates the use of fiber carriers, based on biopolymeric gums as potential candidates for cosmetic and dermatological applications, in particular for skin regeneration. Gum arabic (GA), xanthan gum (XA), and gum karaya (GK) were used as the main gum materials for the fibers, which were prepared by centrifugal spinning from an aqueous solution. These solutions of different mass gum ratios were blended with poly (ethylene oxide) (PEO) for better spinnability. Finally, vitamins E and C were added to selected solutions of gums. The resulting fibers were extensively investigated. The morphology and structure of all fibers were investigated by scanning electron microscopy and Fourier transformed infrared spectroscopy. Most importantly, they were characterized by the release of vitamin E loaded in the fibers using UV-VIS spectroscopy. The presentation will show that the newly prepared fibers from GA and PEO represent a very promising material for cosmetic and dermatologic applications.

Environmental Consequences of Rubber Crumb Application: Soil and Water Pollution.

End-of-life tires are utilized for various purposes, including sports pitches and playground surfaces. However, several substances used at the manufacture of tires can be a source of concerns related to human health or environment's adverse effects. In this context, it is necessary to map whether this approach has the desired effect in a broader relation. While the negative effects on human health were investigated thoroughly and legislation is currently being revisited, the impact on aquatic or soil organisms has not been sufficiently studied. The present study deals with the exposure of freshwater and soil organisms to rubber crumb using the analysis of heavy metal and polycyclic aromatic hydrocarbon concentrations. The obtained results refer to substantial concerns related to freshwater contamination specifically, since the increased concentrations of zinc (7 mg·L-1) and polycyclic aromatic hydrocarbons (58 mg·kg-1) inhibit the growth of freshwater organisms, Desmodesmus subspicatus, and Lemna minor in particular. The performed test with soil organisms points to substantial concerns associated with the mortality of earthworms as well. The acquired knowledge can be perceived as a roadmap to a consistent approach in the implementation of the circular economy, which brings with it a number of so far insufficiently described problems.

Simple and Reproducible Derivatization with Benzoyl Chloride: Improvement of Sensitivity for Multiple Lipid Classes in RP-UHPLC/MS.

The chemical derivatization of multiple lipid classes was developed using benzoyl chloride as a nonhazardous derivatization agent at ambient conditions. The derivatization procedure was optimized with standards for 4 nonpolar and 8 polar lipid classes and measured by reversed-phase ultrahigh-performance liquid chromatography-tandem mass spectrometry. The derivatization and nonderivatization approaches were compared on the basis of the calibration curves of 22 internal standards from 12 lipid classes. The new method decreased the limit of detection 9-fold for monoacylglycerols (0.9-1.0 nmol/mL), 6.5-fold for sphingoid base (0.2 nmol/mL), and 3-fold for diacylglycerols (0.9 nmol/mL). The sensitivity expressed by the ratio of calibration slopes was increased 2- to 10-fold for almost all investigated lipid classes and even more than 100-fold for monoacylglycerols. Moreover, the benzoylation reaction produces a more stable derivative of cholesterol in comparison to the easily in-source fragmented nonderivatized form and enabled the detection of fatty acids in a positive ion mode, which does not require polarity switching as for the nonderivatized form. The intralaboratory comparison with an additional operator without previous derivatization experiences shows the simplicity, robustness, and reproducibility. The stability of the derivatives was determined by periodical measurements during a one month period and five freeze/thaw cycles. The fully optimized derivatization method was applied to human plasma, which allows the detection of 169 lipid species from 11 lipid classes using the high confidence level of identification in reversed-phase (RP)-ultra high performance liquid chromatography (UHPLC)/mass spectrometry (MS). Generally, we detected more lipid species for monoacylglycerols, diacylglycerols, and sphingoid bases in comparison with previously reported papers without the derivatization.

Imidazole-Functionalized Y-Shaped Push-Pull Dye for Nerve Agent Sensing as well as a Catalyst for Their Detoxification.

A Y-shaped push-pull dye (1) with N,N-dimethylanilino donors and a benzonitrile acceptor connected via an imidazole-based π-conjugated spacer was designed. It showed a dark yellow color in solution due to facile intramolecular charge-transfer interaction, but no fluorescence was detected, presumably due to the photo-induced electron transfer effect of the imidazole moiety. However, addition of nerve agents such as diethyl chlorophosphate (DCP, sarin mimic) and diethyl cyanophosphate (DCNP, Tabun mimic) resulted in a blue-colored fluorescence with fading of the native dark yellow color. Mechanistic studies indicated nucleophilic attack of imidazole at the phosphorus of DCP or DCNP, leading to the formation of a phosphorylated intermediate, which undergoes time-dependent hydrolysis (∼24 h) in aqueous medium. This process recovers the free probe (enzyme-like behavior) and releases a less-toxic organophosphate compound as the byproduct. The phosphorylated derivative of 1, formed during such interaction, shows a different electronic behavior, which reduces the extent of charge-transfer interaction as well as nonradiative decay and supports emissive properties. Considering the high sensitivity of 1 towards DCP and DCNP with LOD 35 and 42 ppb, we prepared easy test strips for on-site vapor-phase detection of nerve agents.

Electrochemical investigation of structurally varied azinium scaffolds.

Inspired by the successful utilization of aziniums as anolytes in redox-flow batteries, we have designed and prepared a systematically extended series of (di)azinium compounds based on pyrazine, bipyridine, 1,5-naphthyridine, 3,8-phenanthroline, (E)-4,4'-diazastilbene and 1,2-bis(pyridin-4-yl)acetylene. It has been revealed that the fundamental electrochemical properties are affected mostly by the water-solubility and chemical stability of the particular redox forms. Based on the systematically evolved azinium structure and gathered electrochemical data, structure-property relationships were thoroughly elucidated. Further investigation on flow battery cells identified that the known 4,4'-bipyridinium decorated with two peripheral N-propyl-3-sulfonato pendants allows utilizing both redox steps with good cycling stability, while the naphthyridine scaffold turned out to be a new and promising scaffold for redox-flow batteries.

V-Shaped Methylpyrimidinium Chromophores for Nonlinear Optics.

A series of four V-shaped methylpyrimidinium salts bearing diphenylamino-electron-donating groups appended at various pyrimidine positions were designed. These chromophores were obtained by regioselective N(1) monomethylation by methyl methanesulfonate of the pyrimidine core. Linear optical properties were studied experimentally and electronic properties were further completed by (TD)-DFT calculations. The second-order nonlinear optical (NLO) properties were also studied using electric field induced second harmonic generation (EFISH) method in chloroform, and all pyrimidinium salts exhibited µß0 >1000×10-48  esu. The 2,4-disubstituted pyrimidinium core is preferred over 4,6-disubstitution as it enhances the NLO response and increases the dipole moment. (E,E)-2,4-Bis[4-(diphenylamino)styryl]-1-methylpyrimidin-1-ium methanesulfonate appears to be the best NLO-phore in chloroform in the series (µß0 =2500×10-48  esu) and a figure of merit µß0 /MW=3.4 10-48  esu mol g-1 .

Organoselenium Precursors for Atomic Layer Deposition.

Organoselenium compounds with perspective application as Se precursors for atomic layer deposition have been reviewed. The originally limited portfolio of available Se precursors such as H2Se and diethyl(di)selenide has recently been extended by bis(trialkylsilyl)selenides, bis(trialkylstannyl)selenides, cyclic selenides, and tetrakis(N,N-dimethyldithiocarbamate)selenium. Their structural aspects, property tuning, fundamental properties, and preparations are discussed. It turned out that symmetric four- and six-membered cyclic silyl selenides possess well-balanced reactivity/stability, facile and cost-effective synthesis starting from inexpensive and readily available chlorosilanes, improved resistance toward air and moisture, easy handling, sufficient volatility, thermal resistance, and complete gas-to-solid phase exchange reaction with MoCl5, affording MoSe2 nanostructures. These properties make them the most promising Se precursor developed for atomic layer deposition so far.

Pyrazinacenes exhibit on-surface oxidation-state-dependent conformational and self-assembly behaviours.

Acenes and azaacenes lie at the core of molecular materials' applications due to their important optical and electronic features. A critical aspect is provided by their heteroatom multiplicity, which can strongly affect their properties. Here we report pyrazinacenes containing the dihydro-decaazapentacene and dihydro-octaazatetracene chromophores and compare their properties/functions as a model case at an oxidizing metal substrate. We find a distinguished, oxidation-state-dependent conformational adaptation and self-assembly behaviour and discuss the analogies and differences of planar benzo-substituted decaazapentacene and octaazatetracene forms. Our broad experimental and theoretical study reveals that decaazapentacene is stable against oxidation but unstable against reduction, which is in contrast to pentacene, its C-H only analogue. Decaazapentacenes studied here combine a planar molecular backbone with conformationally flexible substituents. They provide a rich model case to understand the properties of a redox-switchable π-electronic system in solution and at interfaces. Pyrazinacenes represent an unusual class of redox-active chromophores.

Deposition of MoSe2 flakes using cyclic selenides.

The currently limited portfolio of volatile organoselenium compounds used for atomic layer deposition (ALD) has been extended by designing and preparing a series of four-, five- and six-membered cyclic silylselenides. Their fundamental properties were tailored by alternating the ring size, the number of embedded Se atoms and the used peripheral alkyl chains. In contrast to former preparations based on formation of sodium or lithium selenides, the newly developed synthetic method utilizes a direct and easy reaction of elemental selenium with chlorosilanes. Novel 2,2,4,4-tetraisopropyl-1,3,2,4-diselenadisiletane, which features good trade-off between chemical/thermal stability and reactivity, has been successfully used for gas-to-solid phase reaction with MoCl5 affording MoSe2. A thorough characterization of the as-deposited 2D MoSe2 flakes revealed its out-of-plane orientation and high purity. Hence, the developed four-membered cyclic silylselenide turned out to be well-suited Se-precursor for ALD of MoSe2.

Ferrocene donor linked to pyridine/pyridinium acceptor via a systematically enlarged π-linker.

Nine chromophores with ferrocene donor and pyridine/pyridinium acceptors have been prepared and further investigated. The performed X-ray analysis showed partially polarized and geometrically oblate pyridine unit. An extension of the π-system and N-quaternization were revealed as suitable tools for exclusive manipulation of the LUMO with the almost steady HOMO. Whereas the electrochemical HOMO-LUMO gap can be tuned from 3.01 to 1.49 eV, the high- and low-energy absorption bands were found within the range of 280-402/456-547 nm. The pyridinium chromophores showed distinct negative solvatochromism. A thorough DFT analysis has been performed; it turned out that ferrocene donor is capable of two principal D-A interactions, whose employment depends on the appended electron-withdrawing moiety.

Photophysics of 9,9-Dimethylacridan-Substituted Phenylstyrylpyrimidines Exhibiting Long-Lived Intramolecular Charge-Transfer Fluorescence and Aggregation-Induced Emission Characteristics.

Six pyrimidine-based push-pull systems substituted at positions C2 and C4/6 with phenylacridan and styryl moieties, employing methoxy or N,N-diphenylamino donors, have been designed and synthesized through cross-coupling and Knoevenagel reactions. X-ray analysis confirmed that the molecular structure featured the acridan moiety arranged perpendicularly to the residual π system. Photophysical studies revealed significant differences between the methoxy and N,N-diphenylamino chromophores. Solvatochromic studies revealed that the methoxy derivatives showed dual emission in polar solvents. Time-resolved spectroscopy revealed that the higher energy band involved very fast (<80 ps) fluorescence, whereas the lower energy one included long components (≈30 ns) due to long-lived intramolecular charge-transfer fluorescence. In contrast to N,N-diphenylamino chromophores, the methoxy derivatives also showed aggregation-induced emission in mixtures of THF/water, as well as dual emission in thin films, covering almost the whole visible spectrum with corresponding chromaticity coordinates not far from that of pure white light. These properties render the methoxy derivatives as very promising organic materials for white organic light-emitting diodes.

Towards Volatile Organoselenium Compounds with Cost-Effective Synthesis.

The current portfolio of organoselenium compounds applicable as volatile precursors for atomic layer deposition can be denoted as very limited. Hence, we report herein facile and cost-effective preparation of two bis(trialkylstannyl)selenides as well as one selenole and three bis(trialkylsilyl)selenides. Their syntheses have been optimized to: (i) use readily available and inexpensive starting materials, (ii) involve operationally simple methodology (heating in a pressure vessel), (iii) use a minimum amount of additives and catalysts, and (iv) either exclude additional purification or involve only simple distillation. The chemical structure of prepared Se derivatives was confirmed by multinuclear NMR and GC/MS. Their fundamental thermal properties were investigated by differential scanning calorimetry (DSC) and TGA methods that revealed thermal stability within the range of 160-300 °C.

ThDione: A Powerful Electron-Withdrawing Moiety for Push-Pull Molecules.

A series of new push-pull chromophores based on a combined cyclopenta[c]thiophene-4,6-dione (ThDione) acceptor, N,N-dimethylaniline, N-piperidinylthiophene or ferrocene donors, and ethylene or buta-1,3-dienylene π-linkers has been designed and synthesized. Utilizing one or two ThDione acceptors afforded linear or branched push-pull molecules. Experimental and theoretical study of their fundamental properties revealed thermal robustness up to 260 °C, a electrochemical/optical HOMO-LUMO gap that is tunable within the range of 1.47-2.19/1.99-2.39 eV, and thorough elucidation of structure-property relationships. Compared to currently available portfolio of heterocyclic electron-withdrawing units, ThDione proved to be a powerful and versatile acceptor unit. It imparts significant intramolecular charge transfer and polarizes the π-system, which results in enhanced (non)linear optical response.

Cyclic Silylselenides: Convenient Selenium Precursors for Atomic Layer Deposition.

Three cyclic silylselenides were prepared in a straightforward manner. Property tuning has been achieved by varying the ring size and the number of embedded selenium atoms. All silylselenides possess improved resistance towards moisture and oxidation as well as high thermal robustness and sufficient volatility with almost zero residues. The six-membered diselenide proved to be particularly superior Se precursors for atomic layer deposition and allowed facile preparation of MoSe2 layers. Their structure and composition have been investigated by Raman and X-ray photoelectron spectroscopy as well as scanning electron microscopy revealing vertically aligned flaky shaped nanosheets.