RESUMO
Discotic ionic liquid crystals (DILCs) consist of self-assembled superdiscs of cations and anions that spontaneously stack in linear columns with high one-dimensional ionic and electronic charge mobility, making them prominent model systems for functional soft matter. Compared to classical nonionic discotic liquid crystals, many liquid crystalline structures with a combination of electronic and ionic conductivity have been reported, which are of interest for separation membranes, artificial ion/proton conducting membranes, and optoelectronics. Unfortunately, a homogeneous alignment of the DILCs on the macroscale is often not achievable, which significantly limits the applicability of DILCs. Infiltration into nanoporous solid scaffolds can, in principle, overcome this drawback. However, due to the experimental challenges to scrutinize liquid crystalline order in extreme spatial confinement, little is known about the structures of DILCs in nanopores. Here, we present temperature-dependent high-resolution optical birefringence measurement and 3D reciprocal space mapping based on synchrotron X-ray scattering to investigate the thermotropic phase behavior of dopamine-based ionic liquid crystals confined in cylindrical channels of 180 nm diameter in macroscopic anodic aluminum oxide membranes. As a function of the membranes' hydrophilicity and thus the molecular anchoring to the pore walls (edge-on or face-on) and the variation of the hydrophilic-hydrophobic balance between the aromatic cores and the alkyl side chain motifs of the superdiscs by tailored chemical synthesis, we find a particularly rich phase behavior, which is not present in the bulk state. It is governed by a complex interplay of liquid crystalline elastic energies (bending and splay deformations), polar interactions, and pure geometric confinement and includes textural transitions between radial and axial alignment of the columns with respect to the long nanochannel axis. Furthermore, confinement-induced continuous order formation is observed in contrast to discontinuous first-order phase transitions, which can be quantitatively described by Landau-de Gennes free energy models for liquid crystalline order transitions in confinement. Our observations suggest that the infiltration of DILCs into nanoporous solids allows tailoring their nanoscale texture and ion channel formation and thus their electrical and optical functionalities over an even wider range than in the bulk state in a homogeneous manner on the centimeter scale as controlled by the monolithic nanoporous scaffolds.
RESUMO
Polarizability is a key factor when it comes to an accurate description of different ionic systems. The general importance of including polarizability into molecular dynamics simulations was shown in various recent studies for a wide range of materials, ranging from proteins to water to complex ionic liquids and for solid-liquid interfaces. While most previous studies focused on bulk properties or static structure factors, this study investigates in more detail the importance of polarizable surfaces on the dynamics of a confined ionic liquid in graphitic slit pores, as evident in modern electrochemical capacitors or in catalytic processes. A recently developed polarizable force field using Drude oscillators is modified in order to describe a particular room temperature ionic liquid accurately and in agreement with recently published experimental results. Using the modified parameters, various confinements are investigated and differences between non-polarizable and polarizable surfaces are discussed. Upon introduction of surface polarizability, changes in the dipole orientation and in the density distribution of the anions and cations at the interface are observed and are also accompanied with a dramatic increase in the molecular diffusivity in the contact layer. Our results thus clearly underline the importance of considering not only the polarizability of the ionic liquid but also that of the surface.
RESUMO
We have investigated the dynamics of liquid water confined in mesostructured porous silica (MCM-41) and periodic mesoporous organosilicas (PMOs) by incoherent quasielastic neutron scattering experiments. The effect of tuning the water/surface interaction from hydrophilic to more hydrophobic on the water mobility, while keeping the pore size in the range 3.5 nm-4.1 nm, was assessed from the comparative study of three PMOs comprising different organic bridging units and the purely siliceous MCM-41 case. An extended dynamical range was achieved by combining time-of-flight (IN5B) and backscattering (IN16B) quasielastic neutron spectrometers providing complementary energy resolutions. Liquid water was studied at regularly spaced temperatures ranging from 300 K to 243 K. In all systems, the molecular dynamics could be described consistently by the combination of two independent motions resulting from fast local motion around the average molecule position and the confined translational jump diffusion of its center of mass. All the molecules performed local relaxations, whereas the translational motion of a fraction of molecules was frozen on the experimental timescale. This study provides a comprehensive microscopic view on the dynamics of liquid water confined in mesopores, with distinct surface chemistries, in terms of non-mobile/mobile fraction, self-diffusion coefficient, residence time, confining radius, local relaxation time, and their temperature dependence. Importantly, it demonstrates that the strength of the water/surface interaction determines the long-time tail of the dynamics, which we attributed to the translational diffusion of interfacial molecules, while the water dynamics in the pore center is barely affected by the interface hydrophilicity.
RESUMO
The orientational and translational order of a thermotropic ferroelectric liquid crystal (2MBOCBC) imbibed in self-organized, parallel, cylindrical pores with radii of 10, 15, or 20 nm in anodic aluminium oxide monoliths (AAO) are explored by high-resolution linear and circular optical birefringence as well as neutron diffraction texture analysis. The results are compared to experiments on the bulk system. The native oxidic pore walls do not provide a stable smectogen wall anchoring. By contrast, a polymeric wall grafting enforcing planar molecular anchoring results in a thermal-history independent formation of smectic C* helices and a reversible chevron-like layer buckling. An enhancement of the optical rotatory power by up to one order of magnitude of the confined compared to the bulk liquid crystal is traced to the pretransitional formation of helical structures at the smectic-A*-to-smectic-C* transformation. A linear electro-optical birefringence effect evidences collective fluctuations in the molecular tilt vector direction along the confined helical superstructures, i.e. the Goldstone phason excitations typical of the para-to-ferroelectric transition. Their relaxation frequencies increase with the square of the inverse pore radii as characteristic of plane-wave excitations and are two orders of magnitude larger than in the bulk, evidencing an exceptionally fast electro-optical functionality of the liquid-crystalline-AAO nanohybrids.
RESUMO
A novel application of coal gangue as inexpensive adsorbents is considered in this study. The structural and surface properties of natural and modified gangue were studied via nitrogen adsorption. Four types of samples were studied: natural, modified with H2NO3 and H2O2 and calcined at 250 °C and 600 °C. The specific surface area and porosity of the samples were determined using various methods. The raw material is mainly mesoporous with relatively small specific surface area. The chemical modification enlarged the total pore volume and the specific surface area. The calcination at 250 °C enlarged slightly the pore volume and lowered the specific surface area, but did not cause significant changes in the structural properties. The calcination at 600 °C resulted in a significant increase in pore volume and a decrease in specific surface area. These results suggest that the coal gangue studied here could be used as inexpensive adsorbent in industrial wastewater pretreatment.
Assuntos
Resíduos , Adsorção , Carvão Mineral , Peróxido de Hidrogênio/química , Nitritos/química , Nitrogênio/química , Porosidade , Propriedades de Superfície , Temperatura , Resíduos/análiseRESUMO
We experimentally explore pressure-driven flow of water and n-hexane across nanoporous silica (Vycor glass monoliths with 7- or 10-nm pore diameters, respectively) as a function of temperature and surface functionalization (native and silanized glass surfaces). Hydraulic flow rates are measured by applying hydrostatic pressures via inert gases (argon and helium, pressurized up to 70 bar) on the upstream side in a capacitor-based membrane permeability setup. For the native, hydrophilic silica walls, the measured hydraulic permeabilities can be quantitatively accounted for by bulk fluidity provided we assume a sticking boundary layer, i.e., a negative velocity slip length of molecular dimensions. The thickness of this boundary layer is discussed with regard to previous capillarity-driven flow experiments (spontaneous imbibition) and with regard to velocity slippage at the pore walls resulting from dissolved gas. Water flow across the silanized, hydrophobic nanopores is blocked up to a hydrostatic pressure of at least 70 bar. The absence of a sticking boundary layer quantitatively accounts for an enhanced n-hexane permeability in the hydrophobic compared to the hydrophilic nanopores.
Assuntos
Vidro/química , Hexanos/química , Nanoporos , Dióxido de Silício/química , Água/química , Argônio/química , Calibragem , Gases/química , Hélio/química , Hidrodinâmica , Interações Hidrofóbicas e Hidrofílicas , Microfluídica , Modelos Teóricos , Movimento (Física) , Permeabilidade , Pressão , Solubilidade , Propriedades de Superfície , Temperatura , ViscosidadeRESUMO
We report a high-resolution dielectric study on a pyrene-based discotic liquid crystal (DLC) in the bulk state and confined in parallel tubular nanopores of monolithic silica and alumina membranes. The positive dielectric anisotropy of the DLC molecule at low frequencies (in the quasistatic case) allows us to explore the thermotropic collective orientational order. A face-on arrangement of the molecular discs on the pore walls and a corresponding radial arrangement of the molecules is found. In contrast to the bulk, the isotropic-to-columnar transition of the confined DLC is continuous, shifts with decreasing pore diameter to lower temperatures, and exhibits a pronounced hysteresis between cooling and heating. These findings corroborate conclusions from previous neutron and x-ray-scattering experiments as well as optical birefringence measurements. Our study also indicates that the relative simple dielectric technique presented here is a quite efficient method in order to study the thermotropic orientational order of DLC-based nanocomposites.
RESUMO
We report dielectric relaxation spectroscopy experiments on two rod-like liquid crystals of the cyanobiphenyl family (5CB and 6CB) confined in tubular nanochannels with 7 nm radius and 340 micrometer length in a monolithic, mesoporous silica membrane. The measurements were performed on composites for two distinct regimes of fractional filling: monolayer coverage at the pore walls and complete filling of the pores. For the layer coverage a slow surface relaxation dominates the dielectric properties. For the entirely filled channels the dielectric spectra are governed by two thermally-activated relaxation processes with considerably different relaxation rates: a slow relaxation in the interface layer next to the channel walls and a fast relaxation in the core region of the channel filling. The strengths and characteristic frequencies of both relaxation processes have been extracted and analysed as a function of temperature. Whereas the temperature dependence of the static capacitance reflects the effective (average) molecular ordering over the pore volume and is well described within a Landau-de Gennes theory, the extracted relaxation strengths of the slow and fast relaxation processes provide an access to distinct local molecular ordering mechanisms. The order parameter in the core region exhibits a bulk-like behaviour with a strong increase in the nematic ordering just below the paranematic-to-nematic transition temperature TPN and subsequent saturation during cooling. By contrast, the surface ordering evolves continuously with a kink near TPN. A comparison of the thermotropic behaviour of the monolayer with the complete filling reveals that the molecular order in the core region of the pore filling affects the order of the peripheral molecular layers at the wall.
RESUMO
The recent combination of nanoscale developments with biological molecules for biotechnological research has opened a wide field related to the area of biosensors. In the last years, device manufacturing for medical applications adapted the so-called bottom-up approach, from nanostructures to larger devices. Preparation and characterization of artificial biological membranes is a necessary step for the formation of nano-devices or sensors. In this paper, we describe the formation and characterization of a phospholipid bilayer (dipalmitoylphosphatidylcholine, DPPC) on a mattress of a polysaccharide (Chitosan) that keeps the membrane hydrated. The deposition of Chitosan (~25 Å) and DPPC (~60 Å) was performed from the gas phase in high vacuum onto a substrate of Si(100) covered with its native oxide layer. The layer thickness was controlled in situ using Very High Resolution Ellipsometry (VHRE). Raman spectroscopy studies show that neither Chitosan nor DPPC molecules decompose during evaporation. With VHRE and Atomic Force Microscopy we have been able to detect phase transitions in the membrane. The presence of the Chitosan interlayer as a water reservoir is essential for both DPPC bilayer formation and stability, favoring the appearance of phase transitions. Our experiments show that the proposed sample preparation from the gas phase is reproducible and provides a natural environment for the DPPC bilayer. In future work, different Chitosan thicknesses should be studied to achieve a complete and homogeneous interlayer.
Assuntos
1,2-Dipalmitoilfosfatidilcolina/química , Quitosana/química , Bicamadas Lipídicas/química , Membranas Artificiais , Gases/química , Microscopia de Força Atômica , Transição de Fase , Silício/química , Análise Espectral Raman , Vácuo , Água/químicaRESUMO
We explore the optical birefringence of the nematic binary mixtures 6CB_{1-x}7CB_{x} (0 ≤ x ≤ 1) embedded into parallel-aligned nanochannels of mesoporous alumina and silica membranes for channel radii of 3.4 ≤ R ≤ 21.0 nm. The results are compared with the bulk behavior and analyzed with a Landau-de Gennes model. Depending on the channel radius the nematic ordering in the cylindrical nanochannels evolves either discontinuously (subcritical regime, nematic ordering field σ<1/2) or continuously (overcritical regime, σ>1/2), but in both cases with a characteristic paranematic precursor behavior. The strength of the ordering field, imposed by the channel walls, and the magnitude of quenched disorder varies linearly with the mole fraction x and scales inversely proportionally with R for channel radii larger than 4 nm. The critical pore radius, R_{c}, separating a continuous from a discontinuous paranematic-to-nematic evolution varies linearly with x and differs negligibly between the silica and alumina membranes. We find no hints of preferred adsorption of one species at the channels walls. By contrast, a linear variation of the nematic-to-paranematic transition point T_{PN} and of the nematic ordering field σ versus x suggests that the binary mixtures of cyanobiphenyls 6CB and 7CB keep their homogeneous bulk stoichiometry also in nanoconfinement, at least for channel diameters larger than â¼7 nm.
Assuntos
Cristalização/métodos , Cristais Líquidos/química , Nanotubos/química , Nanotubos/ultraestrutura , Refratometria/métodos , Óxido de Alumínio/química , Simulação por Computador , Microfluídica/métodos , Modelos Químicos , Modelos Moleculares , Nanoporos/ultraestrutura , Transição de Fase , Dióxido de Silício/químicaRESUMO
Optical polarimetry measurements of the orientational order of a discotic liquid crystal based on a pyrene derivative confined in parallelly aligned nanochannels of monolithic, mesoporous alumina, silica, and silicon as a function of temperature, channel radius (3-22 nm) and surface chemistry reveal a competition of radial and axial columnar orders. The evolution of the orientational order parameter of the confined systems is continuous, in contrast to the discontinuous transition in the bulk. For channel radii larger than 10 nm we suggest several, alternative defect structures, which are compatible both with the optical experiments on the collective molecular orientation presented here and with a translational, radial columnar order reported in previous diffraction studies. For smaller channel radii our observations can semi-quantitatively be described by a Landau-de Gennes model with a nematic shell of radially ordered columns (affected by elastic splay deformations) that coexists with an orientationally disordered, isotropic core. For these structures, the cylindrical phase boundaries are predicted to move from the channel walls to the channel centres upon cooling, and vice-versa upon heating, in accord with the pronounced cooling/heating hystereses observed and the scaling behavior of the transition temperatures with the channel diameter. The absence of experimental hints of a paranematic state is consistent with a biquadratic coupling of the splay deformations to the order parameter.
RESUMO
Optical birefringence and light absorption measurements reveal four regimes for the thermotropic behavior of a nematogen liquid (7CB) upon sequential filling of parallel-aligned capillaries of 12 nm diameter in a monolithic, mesoporous silica membrane. No molecular reorientation is observed for the first adsorbed monolayer. In the film-condensed state (up to 1 nm thickness), a weak, continuous paranematic-to-nematic (P-N) transition is found, which is shifted by 10 K below the discontinuous bulk transition at T(IN)=305 K. The capillary-condensed state exhibits a more pronounced, albeit still continuous P-N reordering, located 4 K below T(IN). This shift vanishes abruptly upon complete filling of the capillaries. It could originate in competing anchoring conditions at the free inner surfaces and at the pore walls or result from the 10-MPa tensile pressure release associated with the disappearance of concave menisci in the confined liquid upon complete filling. The study documents that the thermo-optical properties of nanoporous systems (or single nanocapillaries) can be tailored over a surprisingly wide range simply by variation of the filling fraction with liquid crystals.
Assuntos
Cristais Líquidos/química , Nanoporos , Fenômenos Ópticos , Temperatura , Membranas Artificiais , Pressão , Dióxido de Silício/químicaRESUMO
The Soai reaction amplifies small enantiomeric excesses in a spectacular manner. Being known for 20 years, it has drawn the attention of many scientists in different fields as it is to date the only chemical reaction offering the chance to study the phenomenon of asymmetric autocatalysis in conjunction with high amplification of enantiomeric excess (ee). This mini-review comprises an introduction to the discovery of asymmetric autocatalysis with amplification of ee and a concise summary of published experimental results showing which starting materials and reaction parameters play an important role in this reaction and which influences are understood. It is addressed especially to scientists entering the field of the Soai reaction to get a quick overview of important aspects.
RESUMO
Herein, we present a new substrate for the Soai reaction, which has an adamantylethynyl residue (1 g) and exhibits asymmetric autocatalysis, yielding products with enantiomeric excesses above 99%. For the first time, all reactions were performed on a parallel synthesizer system to ensure identical reaction conditions. A detailed systematic study of reaction parameters was performed and we report the highest enhancements of enantiomeric excess reported so far in the Soai reaction in one reaction cycle (7.2-->94.1% ee or 3.1-->92.1% ee). Our results led to a set of reaction parameters that yield reproducible results. Therefore, our new starting material 1 g is suitable for systematic and mechanistic studies on this remarkable reaction. A series of experiments designed to quantify the amplification of enantiomeric excess demonstrated that the reaction can be used in principle as a tool for the detection of low enantiomeric excesses: under definite conditions, an unknown low enantiomeric excess (0.1-7%) was amplified to a detectable one. A back calculation to the original value offers a new method for the determination of small enantiomeric excesses.