Relationship of runs of homozygosity with adaptive and production traits in a paternal broiler line.

Genomic regions under high selective pressure present specific runs of homozygosity (ROH), which provide valuable information on the genetic mechanisms underlying the adaptation to environment imposed challenges. In broiler chickens, the adaptation to conventional production systems in tropical environments lead the animals with favorable genotypes to be naturally selected, increasing the frequency of these alleles in the next generations. In this study, ~1400 chickens from a paternal broiler line were genotyped with the 600 K Affymetrix® Axiom® high-density (HD) genotyping array for estimation of linkage disequilibrium (LD), effective population size (N e ), inbreeding and ROH. The average LD between adjacent single nucleotide polymorphisms (SNPs) in all autosomes was 0.37, and the LD decay was higher in microchromosomes followed by intermediate and macrochromosomes. The N e of the ancestral population was high and declined over time maintaining a sufficient number of animals to keep the inbreeding coefficient of this population at low levels. The ROH analysis revealed genomic regions that harbor genes associated with homeostasis maintenance and immune system mechanisms, which may have been selected in response to heat stress. Our results give a comprehensive insight into the relationship between shared ROH regions and putative regions related to survival and production traits in a paternal broiler line selected for over 20 years. These findings contribute to the understanding of the effects of environmental and artificial selection in shaping the distribution of functional variants in the chicken genome.

Parameter estimates for reproductive and carcass traits in Nelore beef cattle.

The aim of this study was to estimate genetic parameters for scrotal circumference at 365 (SC365) and 450 (SC450) days of age, age at first calving (AFC), ribeye area (REA), backfat (BF) thickness, and rump fat (RF) thickness, in order to provide information on potential traits for Nelore cattle breeding program. Genetic parameters were estimated using the Average Information Restricted Maximum Likelihood method in single- and multitrait analyses. Four different animal models were tested for SC365, SC450, REA, BF, and RF in single-trait analyses. For SC365 and SC450, the maternal genetic effect was statistically significant (P < 0.01) and was included for multitrait analyses. The direct heritability estimates for SC365, SC450, AFC, REA, BF, and RF were equal to 0.31, 0.38, 0.24, 0.32, 0.16, and 0.19, respectively. Maternal heritability for SC365 and SC450 was equal to 0.06 and 0.08, respectively. The highest genetic correlations were found among the scrotal circumferences. Testing for the inclusion of maternal effects in genetic parameters estimation for scrotal circumference should be evaluated in the Nelore breeding program, mostly for correctly ranking the animal's estimated breeding values. Similar heritability estimates were observed for scrotal circumference, as well as favorable genetic correlations of this trait with AFC and carcass traits. Thus, scrotal circumference measured at 365 days of age could be a target trait for consideration in the Nelore selection index in order to improve most of the traits herein analyzed.

Evaluation of body weight and visual scores for genetic improvement of Nelore cattle.

The aims of our study were to estimate genetic parameters for body weight and visual scores and to evaluate their inclusion as selection criteria in the Nelore breeding program in Brazil. The traits studied were the body weight adjusted to 210 (W210) and to 450 (W450) days of age and visual scores for body structure, finishing precocity, and muscling evaluated at weaning (BSW, FPW, and MSW) and yearling (BSY, FPY, and MSY) ages. A total of 33,242, 26,259, 23,075, and 26,057 observations were considered to analyze W210, W450, and visual scores at weaning and yearling. The significant (P < 0.05) fixed effects for all traits were farm, birth season, birth year, sex, and management group. Single-trait analyses were performed to define the most fitting model to our data using the average information restricted maximum likelihood algorithm, for weaning traits. Subsequently, these models were used in single- and two-trait analyses considering the Bayesian inference algorithm. Two-trait Bayesian analyses resulted in average direct heritability estimates for BSW, FPW, MSW, W210, BSY, FPY, MSY, and W450 of 0.28, 0.30, 0.27, 0.28, 0.40, 0.44, 0.39, and 0.50, respectively. Genetic correlations varied from 0.40 to 0.96. Benefits to animal performance can best be achieved by considering body structure, finishing precocity, and muscling as selection criteria in the Nelore breeding programs. The decision to use visual scores measured at weaning should be considered in order to decrease generation interval and assist pre-selecting individuals, expecting carcass improvements in the future progeny.

Estimates of genetic parameters and genetic trends for reproductive traits and weaning weight in Tabapuã cattle.

The Tabapuã breed is a beef cattle Brazilian breed known for its sexual precocity and desirable characteristics for tropical conditions. However, this is a newly formed breed and few studies have been conducted regarding genetic parameters and genetic trends for its reproductive traits. The objective of the present study was to estimate the genetic parameters, genetic trends, and relative selection efficiency for weaning weight adjusted to 210 d of age (W210), age at first calving (AFC), average calving interval (ACI), first calving interval (CI1), and accumulated productivity (ACP) among Tabapuã beef cattle. Pedigree data on 15,241 Tabapuã animals born between 1958 and 2011 and phenotype records from 7,340 cows born between 1970 and 2011 were supplied by the National Association of Breeders and Researchers (Associação Nacional de Criadores e Pesquisadores). Analysis through the least squares method assisted in defining the fixed effects that were considered within the models. The estimates for the genetic parameters were obtained through the REML, using a multitrait animal model. The likelihood ratio test applied for W210 was significant ( < 0.05) for the inclusion of maternal additive genetic and permanent environmental effects in the model. Genetic trends were calculated through linear regression of the EBV of the animals, according to the year of birth. The heritability estimates obtained ranged from 0.04 ± 0.03 for CI1 to 0.25 ± 0.05 for W210. The genetic correlations ranged from 0.004 ± 0.19 for W210-AFC and 0.93 ± 0.12 for ACI-CI1. The genetic trend was significant ( < 0.05) and favorable for CI1 and the maternal genetic effect of W210 and was significant ( < 0.05) and unfavorable for AFC, ACI, and ACP. The ACP could be used in the selection index to assist the breeding goal of improved productive and reproductive performance. The genetic trends indicated small and unfavorable genetic changes for AFC, ACI, and ACP in light of the recent implementation of a genetic breeding program for this breed.

Genetic principal components for reproductive and productive traits in dual-purpose buffaloes in Colombia.

A multitrait model (MC) and 5 reduced-rank models with principal component structure (components PC, PC, PC, PC, and PC) were compared. The objectives were to determine the most appropriate model for estimating genetic parameters and to evaluate the genetic progress of dual-purpose buffaloes in Colombia using that model. The traits evaluated were weaning weight (WW), yearling weight (W12), weight at 18 mo of age (W18), weight at 2 yr of age (W24), age at first calving (AFC), and milk yield at 270 d of first lactation (MY270). Genealogy and productive information from 34,326 buffaloes born in Colombia between 1997 and 2014 were used. Colombian Association of Buffalo Breeders (ACB) provided the data. Direct additive genetic and residual random effects were included for all the traits. In addition, the maternal additive genetic effect and permanent environmental random effect were included for WW, while a maternal additive genetic effect was included for W12. The fixed effects were contemporary group (farm, year, and calving season: January to April, May to August, or September to December; for all traits) and sex (for WW, W12, W18, and W24). Additionally, parity was included as a fixed effect for WW and W12. Age at weighing was used as a covariate for WW, W12, W18, and W24. Genetic progress of all traits was analyzed using a generalized smooth model (GAM). According to the Akaike information criteria (AIC), the best model was the one with reduced rank and first 3 principal components (PC). This model maintained 100% of the original variance. Genetic parameters estimated with this model were similar to those estimated by MC, but with smaller standard errors. Heritability for weight-related traits ranged between 0.23 and 0.44. Heritabilities for AFC and MY270 were 0.14 and 0.24, respectively. The genetic correlations obtained between all weights (WW, W12, W18, and W24) were positive and high. Correlations between all weights with AFC were negative and moderate. Correlations between all weights with MY270 were positive and moderate, and between MY270 with AFC were negative and low.

Genetic parameter estimates and principal component analysis of breeding values of reproduction and growth traits in female Canchim cattle.

Phenotypic data from female Canchim beef cattle were used to obtain estimates of genetic parameters for reproduction and growth traits using a linear animal mixed model. In addition, relationships among animal estimated breeding values (EBVs) for these traits were explored using principal component analysis. The traits studied in female Canchim cattle were age at first calving (AFC), age at second calving (ASC), calving interval (CI), and bodyweight at 420 days of age (BW420). The heritability estimates for AFC, ASC, CI and BW420 were 0.03±0.01, 0.07±0.01, 0.06±0.02, and 0.24±0.02, respectively. The genetic correlations for AFC with ASC, AFC with CI, AFC with BW420, ASC with CI, ASC with BW420, and CI with BW420 were 0.87±0.07, 0.23±0.02, -0.15±0.01, 0.67±0.13, -0.07±0.13, and 0.02±0.14, respectively. Standardised EBVs for AFC, ASC and CI exhibited a high association with the first principal component, whereas the standardised EBV for BW420 was closely associated with the second principal component. The heritability estimates for AFC, ASC and CI suggest that these traits would respond slowly to selection. However, selection response could be enhanced by constructing selection indices based on the principal components.

Genetic associations between weight at maturity and maturation rate with ages and weights at first and second calving in Canchim beef cattle.

Genetic parameters for weight at maturity (WM), maturation rate (MR), age and weight at first calving (AFC and WFC) and second calving (ASC and WSC) were estimated for females of the Canchim breed. The number of records per trait ranged from 1440 to 1923. The restricted maximum likelihood method was used and the statistical model included the fixed effect of contemporary group and the additive genetic and residual as random effects. The mean heritability estimate and respective standard errors were 0.34±0.05 (WM), 0.13±0.04 (MR), 0.14±0.04 (AFC), 0.44±0.06 (WFC), 0.16±0.06 (ASC) and 0.39±0.06 (WSC). The heritability estimate for WM and MR suggested that it would be possible to achieve changes in the animals' growth curve through selection, but the genetic correlation between these two traits suggested that there would be antagonism between them. Selection for WM would result in animals with later growth and would also affect individuals' sexual precocity. This was also seen from the genetic correlations between WM and the other traits, which ranged from 0.37 to 0.98; and between MR and the other traits, which ranged from -0.83 to -0.25. Selection to modify WM would be expected to result in correlated responses in AFC, WFC and WSC and a moderate response in ASC. Although the heritability estimate for MR was low, selection aimed for its increase might cause a large decrease in AFC, ASC and WFC and a moderate change in WSC, and this could be an alternative for improving the progeny's overall performance.

Genetic analysis on growth and carcass traits in Nelore cattle.

In this study, the objective was to estimate genetic parameters of body weight at 210 (BW210) and 365 (BW365) days of age in relation to rib eye area (REA), subcutaneous back fat thickness (BF) and rump fat (RF), and their respective genetic trends, in Nelore beef cattle. Estimates of genetic parameters and breeding values for the studied traits were obtained using the REML method. The direct and maternal heritability estimates were respectively: 0.25±0.02 and 0.21±0.01, for BW210, and 0.29±0.02 and 0.09±0.01, for BW365. The heritability estimates for transformed REA, BF and RF were 0.29±0.03, 0.21±0.02 and 0.23±0.03, respectively. There were genetic associations between BW210 and REA, BW365 and REA, and BF and RF, while the other correlations were low. The selection process that was conducted at the farms participating in the breeding program, taking the proposed selection index into consideration, caused genetic changes to these traits.

Genetic parameters and environmental effects on temperament score and reproductive traits of Nellore cattle.

Animal temperament is a trait of economic relevance and its use as a selection criterion requires the identification of environmental factors that influence this trait, as well as the estimation of its genetic variability and interrelationship with other traits. The objectives of this study were to evaluate the effect of the covariates dam age at calving (ADC), long yearling age (YA) and long yearling weight (YW) on temperament score (T) and to estimate genetic parameters for T, scrotal circumference (SC) at long YA and age at first calving (AFC) in Nellore cattle participating in a selection program. The traits were analyzed by the restricted maximum likelihood method under a multiple-trait animal model. For all traits, contemporary group was included as a fixed effect and additive genetic and residual as random effects. In addition to these effects, YA, YW and ADC were considered for analyzing T. In the case of SC and AFC, the effect of long YW was included as a covariate. Genetic parameters were estimated for and between traits. The three covariates significantly influenced T. The heritability estimates for T, SC and AFC were 0.18 ± 0.02, 0.53 ± 0.04 and 0.23 ± 0.08, respectively. The genetic correlations between T and SC, and T and AFC were -0.07 ± 0.17 and -0.06 ± 0.19, respectively. The genetic correlation estimated between SC and AFC was -0.57 ± 0.16. In conclusion, a response to selection for T, SC and AFC is expected and selection for T does not imply correlated responses with the other traits.

Heritabilities and genetic correlations for reproductive traits in an F2 reciprocal cross chicken population.

Studies estimating genetic parameters for reproductive traits in chickens can be useful for understanding and improvement of their genetic architecture. A total of 1276 observations of fertility (FERT), hatchability of fertile eggs (HFE) and hatchability of total eggs (HTE) were used to estimate the genetic and phenotypic parameters of 467 females from an F2 population generated by reciprocal crossing between a broiler line and a layer line, which were developed through a poultry genetics breeding program, maintained by Embrapa Swine and Poultry, Concordia, Santa Catarina, Brazil. Estimates of heritability and genetic and phenotypic correlations were obtained using restricted maximum likelihood calculations under the two-trait animal model, including the fixed effect of group (hatching of birds from the same genetic group) and the random additive genetic and residual effects. The mean percentages for FERT, HFE and HTE were 87.91 ± 19.77, 80.07 ± 26.81 and 70.67 ± 28.55%, respectively. The highest heritability estimate (h(2)) was 0.28 ± 0.04 for HTE. Genetic correlations for FERT with HFE (0.43 ± 0.17), HFE with HTE (0.98 ± 0.02) and FERT with HTE (0.69 ± 0.10) were positive and significant. Individuals with high breeding value for HTE would have high breeding values for HFE and FERT because of the high genetic association between them. These results suggest that HTE should be included as a selection criterion in genetic breeding programs to improve the reproductive performance of chickens, because HTE had the highest heritability estimate and high genetic correlation with FERT and HFE, and it is the easiest to measure.

Heritability estimates and genetic correlations for body weight and scrotal circumference adjusted to 12 and 18 months of age for male Nellore cattle.

Heritability estimates and genetic correlations were obtained for body weight and scrotal circumference, adjusted, respectively, to 12 (BW12 and SC12) and 18 (BW18 and SC18) months of age, for 10 742 male Nellore cattle. The adjustments to SC12 and SC18 were made using a nonlinear logistic function, while BW12 and BW18 were obtained by linear adjustment. The contemporary groups (CGs) were defined from animals born on the same farm, in the same year and birth season. The mean heritability estimates obtained using the restricted maximum likelihood method in bi-trait analysis were 0.25, 0.25, 0.29 and 0.42 for BW12, BW18, SC12 and SC18, respectively. The genetic correlations were 0.30 ± 0.11, 0.21 ± 0.13, 0.21 ± 0.11, -0.08 ± 0.15, 0.16 ± 0.12 and 0.89 ± 0.04 between the traits BW12 and BW18; BW12 and SC12; BW12 and SC18; BW18 and SC12; BW18 and SC18; and SC12 and SC18. The heritability for SC18 was considerably greater than for SC12, suggesting that this should be included as a selection criterion. The genetic correlation between BW18 and SC12 was close to zero, indicating that these traits did not influence each other. The contrary occurred between SC12 and SC18, indicating that selection using one of these could alter the other. Because of the mean magnitudes of heritabilities in the various measurements of weight and scrotal perimeter, it is suggested that the practice of individual selection for these traits is possible.