Ejector pin-related high-cycle fatigue fracture of the critical die corner during automatic multistage cold forging of an automotive wheel nut.

An experimental and numerical study on the ejector pin's mechanics during automatic multistage cold forging (AMSCF) of an automobile wheel nut is conducted. The traditional, decoupled die structural analysis method (DDSM) of analyzing die structures as one of the post-processing functions is criticized, which uses the tractions exerting on the die parts predicted from the forging simulation under the rigid die assumption. To cope with the matter of the DDSM, a multibody treatment scheme (MBTS) is proposed to simulate the AMSCF process, emphasizing the ejector pin's mechanics, using an implicit elastoplastic finite element method. The experiments qualitatively validate the finite element predictions. It is shown that the asymmetric sheared material in AMSCF greatly influences the ejector pin's mechanics, which is characterized by its lateral and longitudinal displacements because of its structural flexibility. It is emphasized that the detailed understanding of the ejector pin's mechanics may not only give a helpful connection towards smart manufacturing because of its mechanical flexibility and sensitivity to the excitations and responses, but it also reveals the reason for the die's high-cycle fatigue (HCF) fracture of the critical die corner (CDC) near at the end of the ejector pin.

A Review of Flow Characterization of Metallic Materials in the Cold Forming Temperature Range and Its Major Issues.

We focus on the importance of accurately describing the flow behaviors of metallic materials to be cold formed; we refer to several valuable examples. We review the typical experimental methods by which flow curves are obtained, in addition to several combined experimental-numerical methods. The characteristics of four fundamental flow models including the Ludwik, Voce, Hollomon, and Swift models are explored in detail. We classify all flow models in the literature into three groups, including the Ludwik and Voce families, and blends thereof. We review the experimental and numerical methods used to optimize the flow curves. Representative flow models are compared via tensile testing, with a focus on the necking point and pre- or post-necking strain hardening. Several closed-form function models employed for the non-isothermal analyses of cold metal forming are also examined. The traditional bilinear C-m model and derivatives thereof are used to describe the complicated flow behaviors of metallic materials at cold forming temperatures, particularly in terms of their applications to metal forming simulations and process optimization.

Automatic Multi-Stage Cold Forging of an SUS304 Ball-Stud with a Hexagonal Hole at One End.

SUS304 stainless steel is characterized by combined tensile and compression testing, with an emphasis on flow stress at higher strain and temperature. The plastic deformation behavior of SUS304 from room temperature to 400 °C is examined and a general approach is used to express flow stress as a closed-form function of strain, strain rate, and temperature; this is optimal when the strain is high, especially during automatic multi-stage cold forging. The fitted flow stress is subjected to elastothermoviscoplastic finite element analysis (FEA) of an automatic multi-stage cold forging process for an SUS304 ball-stud. The importance of the thermal effect during cold forging, in terms of high material strength and good strain-hardening, is revealed by comparing the forming load, die wear and die stress predictions of non-isothermal and isothermal FEAs. The experiments have shown that the predictions of isothermal FEA are not feasible because of the high predicted effective stress on the weakest part of the die.