RESUMO
Domain walls (DWs) in ferroelectric materials are interfaces that separate domains with different polarizations. Charged domain walls (CDWs) and neutral domain walls are commonly classified depending on the charge state at the DWs. CDWs are particularly attractive as they are configurable elements, which can enhance field susceptibility and enable functionalities such as conductance control. However, it is difficult to achieve CDWs in practice. Here, we demonstrate that applying mechanical stress is a robust and reproducible approach to generate CDWs. By mechanical compression, CDWs with a head/tail-to-body configuration were introduced in ultrathin BaTiO3, which was revealed by in-situ transmission electron microscopy. Finite element analysis shows strong strain fluctuation in ultrathin BaTiO3 under compressive mechanical stress. Molecular dynamics simulations suggest that the strain fluctuation is a critical factor in forming CDWs. This study provides insight into ferroelectric DWs and opens a pathway to creating CDWs in ferroelectric materials.
RESUMO
Metals with nanocrystalline grains have ultrahigh strengths approaching two gigapascals. However, such extreme grain-boundary strengthening results in the loss of almost all tensile ductility, even when the metal has a face-centred-cubic structure-the most ductile of all crystal structures1-3. Here we demonstrate that nanocrystalline nickel-cobalt solid solutions, although still a face-centred-cubic single phase, show tensile strengths of about 2.3 gigapascals with a respectable ductility of about 16 per cent elongation to failure. This unusual combination of tensile strength and ductility is achieved by compositional undulation in a highly concentrated solid solution. The undulation renders the stacking fault energy and the lattice strains spatially varying over length scales in the range of one to ten nanometres, such that the motion of dislocations is thus significantly affected. The motion of dislocations becomes sluggish, promoting their interaction, interlocking and accumulation, despite the severely limited space inside the nanocrystalline grains. As a result, the flow stress is increased, and the dislocation storage is promoted at the same time, which increases the strain hardening and hence the ductility. Meanwhile, the segment detrapping along the dislocation line entails a small activation volume and hence an increased strain-rate sensitivity, which also stabilizes the tensile flow. As such, an undulating landscape resisting dislocation propagation provides a strengthening mechanism that preserves tensile ductility at high flow stresses.
Assuntos
Cobalto , Metais , Cobalto/química , Teste de Materiais , Metais/química , Resistência à TraçãoRESUMO
Ferroelectric nanoplates are attractive for applications in nanoelectronic devices. Defect engineering has been an effective way to control and manipulate ferroelectric properties in nanoscale devices. Defects can act as pinning centers for ferroelectric domain wall motion, altering the switching properties and domain dynamics of ferroelectrics. However, there is a lack of detailed investigation on the interactions between defects and domain walls in ferroelectric nanoplates due to the limitation of previous characterization techniques, which impedes the development of defect engineering in ferroelectric nanodevices. In this study, we applied in situ biasing transmission electron microscopy to explore how dislocation loops, which were judiciously introduced into barium titanate nanoplates via electron beam irradiation, affect the motion of ferroelectric domain walls. The results show that the motion was dramatically suppressed by these localized defects, because of the local strain fields induced by the defects. The pinning effect can be further enhanced by multiple domain walls embedded with defect arrays. These results indicate the possibility of manipulating domain switching in ferroelectric nanoplates via the electron beam.
RESUMO
Failure of polarization reversal, i.e., ferroelectric degradation, induced by cyclic electric loadings in ferroelectric materials, has been a long-standing challenge that negatively impacts the application of ferroelectrics in devices where reliability is critical. It is generally believed that space charges or injected charges dominate the ferroelectric degradation. However, the physics behind the phenomenon remains unclear. Here, using in-situ biasing transmission electron microscopy, we discover change of charge distribution in thin ferroelectrics during cyclic electric loadings. Charge accumulation at domain walls is the main reason of the formation of c domains, which are less responsive to the applied electric field. The rapid growth of the frozen c domains leads to the ferroelectric degradation. This finding gives insights into the nature of ferroelectric degradation in nanodevices, and reveals the role of the injected charges in polarization reversal.
RESUMO
Relaxor ferroelectrics, which can exhibit exceptional electromechanical coupling, are some of the most important functional materials, with applications ranging from ultrasound imaging to actuators. Since their discovery, their complex nanoscale chemical and structural heterogeneity has made the origins of their electromechanical properties extremely difficult to understand. Here, we employ aberration-corrected scanning transmission electron microscopy to quantify various types of nanoscale heterogeneities and their connection to local polarization in the prototypical relaxor ferroelectric system Pb(Mg1/3Nb2/3)O3-PbTiO3. We identify three main contributions that each depend on Ti content: chemical order, oxygen octahedral tilt and oxygen octahedral distortion. These heterogeneities are found to be spatially correlated with low-angle polar domain walls, indicating their role in disrupting long-range polarization and leading to nanoscale domain formation and the relaxor response. We further locate nanoscale regions of monoclinic-like distortion that correlate directly with Ti content and electromechanical performance. Through this approach, the connections between chemical heterogeneity, structural heterogeneity and local polarization are revealed, validating models that are needed to develop the next generation of relaxor ferroelectrics.
RESUMO
Dielectric capacitors with high energy storage density (Wrec) and efficiency (η) are in great demand for high/pulsed power electronic systems, but the state-of-the-art lead-free dielectric materials are facing the challenge of increasing one parameter at the cost of the other. Herein, we report that high Wrec of 6.3 J cm-3 with η of 90% can be simultaneously achieved by constructing a room temperature M2-M3 phase boundary in (1-x)AgNbO3-xAgTaO3 solid solution system. The designed material exhibits high energy storage stability over a wide temperature range of 20-150 °C and excellent cycling reliability up to 106 cycles. All these merits achieved in the studied solid solution are attributed to the unique relaxor antiferroelectric features relevant to the local structure heterogeneity and antiferroelectric ordering, being confirmed by scanning transmission electron microscopy and synchrotron X-ray diffraction. This work provides a good paradigm for developing new lead-free dielectrics for high-power energy storage applications.
RESUMO
The development of xenon plasma focused ion-beam (Xe+ PFIB) milling technique enables site-specific sample preparation with milling rates several times larger than the conventional gallium focused ion-beam (Ga+ FIB) technique. As such, the effect of higher beam currents and the heavier ions utilized in the Xe+ PFIB system is of particular importance when investigating material properties. To investigate potential artifacts resulting from these new parameters, a comparative study is performed on transmission electron microscopy (TEM) samples prepared via Xe+ PFIB and Ga+ FIB systems. Utilizing samples prepared with each system, the mechanical properties of CrMnFeCoNi high-entropy alloy (HEA) samples are evaluated with in situ tensile straining TEM studies. The results show that HEA samples prepared by Xe+ PFIB present better ductility but lower strength than those prepared by Ga+ FIB. This is due to the small ion-irradiated volumes and the insignificant alloying effect brought by Xe irradiation. Overall, these results demonstrate that Xe+ PFIB systems allow for a more efficient material removal rate while imparting less damage to HEAs than conventional Ga+ FIB systems.
RESUMO
High-performance piezoelectrics benefit transducers and sensors in a variety of electromechanical applications. The materials with the highest piezoelectric charge coefficients (d 33) are relaxor-PbTiO3 crystals, which were discovered two decades ago. We successfully grew Sm-doped Pb(Mg1/3Nb2/3)O3-PbTiO3 (Sm-PMN-PT) single crystals with even higher d 33 values ranging from 3400 to 4100 picocoulombs per newton, with variation below 20% over the as-grown crystal boule, exhibiting good property uniformity. We characterized the Sm-PMN-PT on the atomic scale with scanning transmission electron microscopy and made first-principles calculations to determine that the giant piezoelectric properties arise from the enhanced local structural heterogeneity introduced by Sm3+ dopants. Rare-earth doping is thus identified as a general strategy for introducing local structural heterogeneity in order to enhance the piezoelectricity of relaxor ferroelectric crystals.
RESUMO
BACKGROUND: Temozolomide (TMZ) is active against glioblastomas (GBM) in which the O6-methylguanine-DNA methyltransferase (MGMT) gene is silenced. However, even in responsive cases, its beneficial effect is undermined by the emergence of drug resistance. Here, we tested whether inhibition of poly (ADP-ribose) polymerase-1 and -2 (PARP) enhanced the effectiveness of TMZ. METHODS: Using patient derived brain tumor initiating cells (BTICs) and orthotopic xenografts as models of newly diagnosed and recurrent high-grade glioma, we assessed the effects of TMZ, ABT-888, and the combination of TMZ and ABT-888 on the viability of BTICs and survival of tumor-bearing mice. We also studied DNA damage repair, checkpoint protein phosphorylation, and DNA replication in mismatch repair (MMR) deficient cells treated with TMZ and TMZ plus ABT-888. RESULTS: Cells and xenografts derived from newly diagnosed MGMT methylated high-grade gliomas were sensitive to TMZ while those derived from unmethylated and recurrent gliomas were typically resistant. ABT-888 had no effect on the viability of BTICs or tumor bearing mice, but co-treatment with TMZ restored sensitivity in resistant cells and xenografts from newly diagnosed unmethylated gliomas and recurrent gliomas with MSH6 mutations. In contrast, the addition of ABT-888 to TMZ had little sensitizing effect on cells and xenografts derived from newly diagnosed methylated gliomas. In a model of acquired TMZ resistance mediated by loss of MMR gene MSH6, re-sensitization to TMZ by ABT-888 was accompanied by persistent DNA strand breaks, re-engagement of checkpoint kinase signaling, and interruption of DNA synthesis. CONCLUSION: In laboratory models, the addition of ABT-888 to TMZ overcame resistance to TMZ.
Assuntos
Benzimidazóis/farmacologia , Resistencia a Medicamentos Antineoplásicos/efeitos dos fármacos , Glioma/patologia , Temozolomida/farmacologia , Ensaios Antitumorais Modelo de Xenoenxerto , Animais , Linhagem Celular Tumoral , Proteínas de Ligação a DNA/deficiência , Proteínas de Ligação a DNA/genética , Feminino , Técnicas de Silenciamento de Genes , Humanos , Camundongos , Gradação de Tumores , RNA Interferente Pequeno/genéticaRESUMO
Self-assembled nanocomposites have been extensively investigated due to the novel properties that can emerge when multiple material phases are combined. Growth of epitaxial nanocomposites using lattice-mismatched constituents also enables strain-engineering, which can be used to further enhance material properties. Here, we report self-assembled growth of highly tensile-strained Ge/In0.52Al0.48As (InAlAs) nanocomposites by using spontaneous phase separation. Transmission electron microscopy shows a high density of single-crystalline germanium nanostructures coherently embedded in InAlAs without extended defects, and Raman spectroscopy reveals a 3.8% biaxial tensile strain in the germanium nanostructures. We also show that the strain in the germanium nanostructures can be tuned to 5.3% by altering the lattice constant of the matrix material, illustrating the versatility of epitaxial nanocomposites for strain engineering. Photoluminescence and electroluminescence results are then discussed to illustrate the potential for realizing devices based on this nanocomposite material.
RESUMO
BACKGROUND: IDH1 gene mutations identify gliomas with a distinct molecular evolutionary origin. We sought to determine the impact of surgical resection on survival after controlling for IDH1 status in malignant astrocytomas-World Health Organization grade III anaplastic astrocytomas and grade IV glioblastoma. METHODS: Clinical parameters including volumetric assessment of preoperative and postoperative MRI were recorded prospectively on 335 malignant astrocytoma patients: n = 128 anaplastic astrocytomas and n = 207 glioblastoma. IDH1 status was assessed by sequencing and immunohistochemistry. RESULTS: IDH1 mutation was independently associated with complete resection of enhancing disease (93% complete resections among mutants vs 67% among wild-type, P < .001), indicating IDH1 mutant gliomas were more amenable to resection. The impact of residual tumor on survival differed between IDH1 wild-type and mutant tumors. Complete resection of enhancing disease among IDH1 wild-type tumors was associated with a median survival of 19.6 months versus 10.7 months for incomplete resection; however, no survival benefit was observed in association with further resection of nonenhancing disease (minimization of total tumor volume). In contrast, IDH1 mutants displayed an additional survival benefit associated with maximal resection of total tumor volume (median survival 9.75 y for >5 cc residual vs not reached for <5 cc, P = .025). CONCLUSIONS: The survival benefit associated with surgical resection differs based on IDH1 genotype in malignant astrocytic gliomas. Therapeutic benefit from maximal surgical resection, including both enhancing and nonenhancing tumor, may contribute to the better prognosis observed in the IDH1 mutant subgroup. Thus, individualized surgical strategies for malignant astrocytoma may be considered based on IDH1 status.
Assuntos
Astrocitoma/genética , Neoplasias Encefálicas/genética , Isocitrato Desidrogenase/genética , Mutação/genética , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Astrocitoma/mortalidade , Astrocitoma/cirurgia , Neoplasias Encefálicas/mortalidade , Neoplasias Encefálicas/cirurgia , Feminino , Seguimentos , Humanos , Masculino , Pessoa de Meia-Idade , Gradação de Tumores , Prognóstico , Estudos Prospectivos , Taxa de Sobrevida , Adulto JovemRESUMO
The acyl coenzyme A (CoA) binding protein AcbA is secreted unconventionally and processed into spore differentiation factor 2 (SDF-2), a peptide that coordinates sporulation in Dictyostelium discoideum. We report that AcbA is localized in vesicles that accumulate in the cortex of prespore cells just prior to sporulation. These vesicles are not observed after cells are stimulated to release AcbA but remain visible after stimulation in cells lacking the Golgi reassembly stacking protein (GRASP). Acyl-CoA binding is required for the inclusion of AcbA in these vesicles, and the secretion of AcbA requires N-ethylmaleimide-sensitive factor (NSF). About 1% of the total cellular AcbA can be purified within membrane-bound vesicles. The yield of vesicles decreases dramatically when purified from wild-type cells that were stimulated to release AcbA, whereas the yield from GRASP mutant cells was only modestly altered by stimulation. We suggest that these AcbA-containing vesicles are secretion intermediates and that GRASP functions at a late step leading to the docking/fusion of these vesicles at the cell surface.
Assuntos
Dictyostelium/metabolismo , Proteínas de Protozoários/metabolismo , Vesículas Secretórias/metabolismo , Acil Coenzima A/metabolismo , Centrifugação , Detergentes/farmacologia , Dictyostelium/citologia , Dictyostelium/efeitos dos fármacos , Peptídeos e Proteínas de Sinalização Intercelular , Proteínas Sensíveis a N-Etilmaleimida/metabolismo , Peptídeos/metabolismo , Ligação Proteica/efeitos dos fármacos , Transporte Proteico/efeitos dos fármacos , Vesículas Secretórias/efeitos dos fármacos , Transdução de Sinais/efeitos dos fármacos , Ácido gama-Aminobutírico/farmacologiaRESUMO
The acyl coenzyme A (CoA) binding protein AcbA is cleaved to form a peptide (SDF-2) that coordinates spore encapsulation during the morphogenesis of Dictyostelium discoideum fruiting bodies. We present genetic evidence that the misspecification of cell types seen in mutants of the serine protease/ABC transporter TagA results from the loss of normal interactions with AcbA. Developmental phenotypes resulting from aberrant expression of the TagA protease domain, such as the formation of supernumerary tips on aggregates and the production of excess prestalk cells, are suppressed by null mutations in the acbA gene. Phenotypes resulting from the deletion of tagA, such as overexpression of the prestalk gene ecmB and the misexpression of the prespore gene cotB in stalk cells, are also observed in acbA mutants. Moreover, tagA- mutants fail to produce SDF-2 during fruiting body morphogenesis but are able to do so if they are stimulated with exogenous SDF-2. These results indicate that the developmental program depends on TagA and AcbA working in concert with each other during cell type differentiation and suggest that TagA is required for normal SDF-2 signaling during spore encapsulation.
Assuntos
Transportadores de Cassetes de Ligação de ATP/metabolismo , Inibidor da Ligação a Diazepam/metabolismo , Dictyostelium/citologia , Dictyostelium/metabolismo , Proteínas de Protozoários/metabolismo , Serina Endopeptidases/metabolismo , Transportadores de Cassetes de Ligação de ATP/genética , Animais , Diferenciação Celular/genética , Dictyostelium/genética , Deleção de Genes , Genes de Protozoários , Peptídeos e Proteínas de Sinalização Intercelular , Mutação , Peptídeos/metabolismo , Fenótipo , Proteínas de Protozoários/genética , Serina Endopeptidases/genética , Esporos de Protozoários/genética , Esporos de Protozoários/metabolismoRESUMO
The tag genes of Dictyostelium are predicted to encode multi-domain proteins consisting of serine protease and ATP-binding cassette transporter domains. We have identified a novel tag gene, tagA, which is involved in cell type differentiation. The tagA mRNA accumulates during the first four hours of development, whereas TagA protein accumulates between two and ten hours of development and decreases thereafter. Wild-type cells express tagA in prespore cells and mature spores, defining tagA expression as prespore specific. However, tagA mutant cells that activate the tagA promoter do not sporulate, but instead form part of the outer basal disc and lower cup of the fruiting body. tagA mutant aggregates elaborate multiple prestalk cell regions during development and produce spores asynchronously and with low viability. tagA mutants produce about twice as many prestalk cells as the wild type as judged by a prestalk cell reporter construct. When mixed with wild-type cells, tagA(-) cells become overrepresented in the prestalk cell population, suggesting that this phenotype is cell-autonomous. These results suggest that TagA is required for the specification of an initial population of prespore cells in which tagA is expressed. Expression profiling uncovered a delay in the transcriptional program between 2 and 6 hours, coincident with TagA expression, revealing an early function for TagA. TagA also appears to play a general role in cell fate determination since tagA mutants express a spore coat protein gene (cotB) within vacuolated cells that form part of the stalk and they express a prestalk/stalk-specific gene (ecmB) within cells that become spores. The expression of TagA at two hours of development, the observed coincident delay in the transcriptional program and the subsequent mis-expression of cell-type specific genes provide evidence for cell fate determination beginning in some cells much earlier than previously believed.