Nuclear localization signal peptide enhances transfection efficiency and decreases cytotoxicity of poly(agmatine/N,N'-cystamine-bis-acrylamide)/pDNA complexes.

At present, nonviral gene vectors develop rapidly, especially cationic polymers. A series of bioreducible poly(amide amine) (PAA) polymers containing guanidino groups have been synthesized by our research team. These novel polymer vectors demonstrated significantly higher transfection efficiency and lower cytotoxicity than polyethylenimine (PEI)-25kDa. However, compared with viral gene vectors, relatively low transfection efficiency, and high cytotoxicity are still critical problems confronting these polymers. In this study, poly(agmatine/N,N'-cystamine-bis-acrylamide) p(AGM-CBA) was selected as a model polymer, nuclear localization signal (NLS) peptide PV7 (PKKKRKV) with good biocompatibility and nuclear localization effect was introduced to investigate its impact on transfection efficiency and cytotoxicity. NLS peptide-mediated in vitro transfection was performed in NIH 3T3 cells by directly incorporating NLS peptide with the complexes of p(AGM-CBA)/pDNA. Meanwhile, the transfection efficiency and cytotoxicity of these complexes were evaluated. The results showed that the transfection efficiency could be increased by 5.7 times under the appropriate proportion, and the cytotoxicity brought by the polymer vector could be significantly reduced.

Nuclear delivery of plasmid DNA determines the efficiency of gene expression.

As a cationic non-viral gene delivery vector, poly(agmatine/ N, N'-cystamine-bis-acrylamide) (AGM-CBA) showed significantly higher plasmid DNA (pDNA) transfection ability than polyethylenimine (PEI) in NIH/3T3 cells. The transfection expression of AGM-CBA/pDNA polyplexes was found to have a non-linear relationship with AGM-CBA/pDNA weight ratios. To further investigate the mechanism involved in the transfection process of poly(AGM-CBA), we used pGL3-control luciferase reporter gene (pLUC) as a reporter pDNA in this study. The distribution of pLUC in NIH/3T3 cells and nuclei after AGM-CBA/pLUC and PEI/pLUC transfection were determined by quantitative polymerase chain reaction (qPCR) analysis. The intracellular trafficking of the polyplexes was evaluated by cellular uptake and nuclei delivery of pLUC, and the intracellular availability was evaluated by the ratio of transfection expression to the numbers of pLUC delivered in nuclei. It was found that pLUC intracellular trafficking did not have any correlation with the transfection expression, while an excellent correlation was found between the nuclei pLUC availability and transfection expression. These results suggested that the intracellular availability of pLUC in nuclei was the rate-limiting step for pLUC transfection expression. Further optimization of the non-viral gene delivery system can be focused on the improvement of gene intracellular availability.

Comparison of exosome-mimicking liposomes with conventional liposomes for intracellular delivery of siRNA.

Exosomes have been extensively explored as delivery vehicles due to low immunogenicity, efficient cargo delivery, and possibly intrinsic homing capacity. However, therapeutic application of exosomes is hampered by structural complexity and lack of efficient techniques for isolation and drug loading. Liposomes represent one of the most successful therapeutic nanocarriers, but are frequently criticized by short blood circulation and inefficient intracellular drug delivery. In this circumstance, a promising strategy is to facilitate a positive feedback between two fields. Herein, exosome-mimicking liposomes were formulated with DOPC/SM/Chol/DOPS/DOPE (21/17.5/30/14/17.5, mol/mol), and harnessed for delivery of VEGF siRNA to A549 and HUVEC cells. Compared with Lipo 2000 and DOTAP liposomes, exosome-mimicking liposomes exhibited less than four-fold cytotoxicity but higher storage stability and anti-serum aggregation effect. Exosome-mimicking liposomes appeared to enter A549 cells through membrane fusion, caveolae-mediated endocytosis, and macropinocytosis, while enter HUVEC through caveolae-mediated endocytosis, which revealed that the uptake pathway was dependent on cell types. Notably, exosome-mimicking liposomes exhibited significantly higher cellular uptake and silencing efficiency than PC-Chol liposomes (>three-fold), suggesting the unique lipid composition did enhance the intracellular delivery efficiency of exosome-mimicking liposomes to a significantly greater extent. However, it still remained far from satisfactory delivery as compared to cationic Lipo 2000 and DOTAP liposomes, which warranted further improvement in future research. This study may encourage further pursuit of more exosome-mimicking delivery vehicles with higher efficiency and biocompatibility.

PEGylated lipid microspheres loaded with cabazitaxel for intravenous administration: stability, bioavailability, antitumor efficacy, and toxicity.

This paper aimed to develop a novel lipid microsphere delivering cabazitaxel (CTX) using phosphatidylcholine combined with DSPE-PEG2000 as emulsifier, and evaluate its stability, pharmacokinetics, antitumor efficacy, and toxicity. The pegylated cabazitaxel-loaded lipid microspheres (CTX-PLMs) were prepared by high-pressure homogenization methods; the biological samples were analyzed by the UPLC-MS/MS method. CTX-PLMs had a drug concentration of 1.2 mg/ml and a mean particle size of 180.0 ± 51.119 nm. CTX-PLMs showed a superior physical stability as it could remain nearly intact after 1-year storage. The AUC0-t of the CTX-PLMs was 1562.6 ± 520.1 µg h L-1 compared with the CTX-solution of 860.734 ± 312.4 µg h L-1. CTX-PLMs exhibited a strong antitumor efficacy against NCI-N87 and DU145 tumor models with tumor growth inhibition rates of 93.5 and 88.5%, respectively. The LD50 of CTX-PLMs in rats was 20.89 mg/kg. As for the long-term toxicity, the thymus, mesenteric lymph nodes, and bone marrow were the main toxic target organs and systemic toxicity induced by CTX-PLMs was alleviated relative to that of the CTX-solution. Safety assessment studies including hemolysis test, dermal sensitization test, systemic anaphylaxis, and vascular stimulation test indicated that CTX-PLMs is safe enough for intravenous administration. In a word, CTX-PLMs are a promising carrier for intravenous administration with satisfactory stability, stronger tumor inhibition, and superior safety profile.

Functionalized extracellular vesicles as advanced therapeutic nanodelivery systems.

Extracellular vesicles (EVs) are membrane enclosed vesicles that are shed by almost all cell types, and play a fundamental role in cell-to-cell communication. The discovery that EVs are capable of functionally transporting nucleic acid- and protein-based cargoes between cells, rapidly promotes the idea of employing them as drug delivery systems. These endogenous vesicles indeed hold tremendous promise for therapeutic delivery. However, issues associated with exogenously administered EVs, including rapid clearance by the immune system, apparent lack of targeting cell specificity, and insufficient cytoplasmic delivery efficiency, may limit their therapeutic applicability. In this review, we discuss recent research avenues in EV-based therapeutic nanodelivery systems. Furthermore, we narrow our focus on the development of modification strategies to enhance the delivery properties of EVs, and elaborate on how to rationally harness these functionalized vesicles for therapeutic delivery.

Liposome-chaperoned cell-free synthesis for the design of proteoliposomes: Implications for therapeutic delivery.

Cell-free (CF) protein synthesis has emerged as a powerful technique platform for efficient protein production in vitro. Liposomes have been widely studied as therapeutic carriers due to their biocompatibility, biodegradability, low toxicity, flexible surface manipulation, easy preparation, and higher cargo encapsulation capability. However, rapid immune clearance, insufficient targeting capacity, and poor cytoplasmic delivery efficiency substantially restrict their clinical application. The incorporation of functional membrane proteins (MPs) or peptides allows the transfer of biological properties to liposomes and imparts them with improved circulation, increased targeting, and efficient intracellular delivery. Liposome-chaperoned CF synthesis enables production of proteoliposomes in one-step reaction, which not only substantially simplifies the production procedure but also keeps protein functionality intact. Building off these observations, proteoliposomes with integrated MPs represent an excellent candidate for therapeutic delivery. In this review, we describe recent advances in CF synthesis with emphasis on detailing key factors for improving CF expression efficiency. Furthermore, we provide insights into strategies for rational design of proteoliposomal nanodelivery systems via CF synthesis. STATEMENT OF SIGNIFICANCE: Liposome-chaperoned CF synthesis has emerged as a powerful approach for the design of recombinant proteoliposomes in one-step reaction. The incorporation of bioactive MPs or peptides into liposomes via CF synthesis can facilitate the development of proteoliposomal nanodelivery systems with improved circulation, increased targeting, and enhanced cellular delivery capacity. Moreover, by adapting lessons learned from natural delivery vehicles, novel bio-inspired proteoliposomes with enhanced delivery properties could be produced in CF systems. In this review, we first give an overview of CF synthesis with focus on enhancing protein expression in liposome-chaperoned CF systems. Furthermore, we intend to provide insight into harnessing CF-synthesized proteoliposomes for efficient therapeutic delivery.

Disulfide-bond-containing agamatine-cystaminebisacrylamide polymer demonstrates better transfection efficiency and lower cytotoxicity than polyethylenimine in NIH/3T3 cells.

Previously, we synthesized a non-viral vector containing disulfide bond by polymerization of agamatine (AGM) and N,N'-cystaminebisacrylamide (CBA). In this study, we investigated the transfection efficiency of disulfide bond (SS) containing AGM-CBA polymer in gene delivery into NIH/3T3 cells, and examined the factors affecting its transfection efficiency by comparing with polyethylenimine (PEI). In addition, experiments were carried out to determine the mechanisms of cell entry pathways and intracellular behavior of AGM-CBA/pDNA polyplexes. The transfection efficiency of AGM-CBA/pDNA with different weight ratios and different amounts of pDNA was measured and the pathways mediated transfection processes were studied by using various endocytosis inhibitors. To determine the intracellular behavior of AGM-CBA/pDNA polyplexes, the transfection efficiencies of AGM-CBA/pDNA and PEI/pDNA polyplexes with different combination structures were determined by using reporter gene and fake plasmid DNA. The transfection efficiency of AGM-CBA/pDNA polyplexes was correlated with its weight ratio of AGM-CBA and pDNA, and the amount of pDNA. Both AGM-CBA/pDNA and PEI/pDNA polyplexes enter into cell by clathrin- and caveolae-mediated endocytic pathways. However, AGM-CBA/pDNA showed different intracellular behavior in NIH/3T3 cells compared to PEI/pDNA polyplexes. It was hypothesized that disulfide bond in AGM-CBA could be an important factor contributing to its intracellular behavior and better transfection efficiency. Overall, AGM-CBA demonstrated better transfection efficiency and lower cytotoxicity than PEI in NIH/3T3 cells as a gene delivery vector.

Exosome-based small RNA delivery: Progress and prospects.

RNA interfering (RNAi), mediated by small interfering RNAs and microRNAs, is currently one of the most promising tools of gene therapy. Small RNAs are capable of inducing specific post-transcriptional gene silencing, providing a potentially effective platform for the treatment of a wide array of diseases. However, similar to other nucleic acid-based drugs, the major hurdle of RNAi therapy is lack of efficient and non-immunogenic delivery vehicles. Currently, viruses, synthetic polymers, and lipid-based carriers are among the most widely studied vehicles for small RNA delivery. However, many drawbacks are reported to be associated with these delivery vehicles. There is a pressing need to replace them with more efficient and better-tolerated approaches. Exosomes secreted from the endocytic compartment of live cells, are a subtype of endogenous extracellular vesicles that transfer genetic and biochemical information among different cells, thus playing an important role in cell-cell communication. Recently, accumulating attention has been focused on harnessing exosomes as nanaocarriers for small RNAs delivery. Due to their natural role in shuttling endogenous nucleic acid in our body, exosomes may exhibit higher delivery efficiency, lower immunogenicity, and better compatibility than existing foreign RNA carriers. Importantly, exosomes own intrinsic homing capacity that can guide small RNAs across natural membranous barriers. Moreover, such a capacity can be further improved by adding appropriate targeting moieties. In this manuscript, we briefly review the progress and challenges of RNAi therapy, and discuss the potential of exosomes' applications in small RNA delivery with focus on the most recent advances in exosome-based small RNA delivery for disease therapy.

Tablets of paliperidone using compression-coated technology for controlled ascending release.

The aim of this work was to prepare ascending release compression-coated (CC) tablets with paliperidone (PAL) using a simple manufacturing technique and short manufacturing process. The release behavior and mechanisms in vitro of the final tablets was investigated and evaluated. The PAL CC tablets were comprised of a core layer of high viscosity hydroxypropyl cellulose (HPC-H) and a coating layer of high viscosity hydroxypropyl methylcellulose (HPMC-K100M). Several factors such as materials and core tablet compositions were studied for their influence in the formulation procedure. The drug release mechanism was studied using gravimetric analysis. The data could be fitted to the Peppas model. The ascending drug release results were expressed in terms of the slope of the release curve at different time points. Results showed that the formulation could achieve a good ascending drug release when the weight ratio of PAL was 5:1 (core:layer). The fraction of HPC and HPMC was 33 %, and the combination of Eudragit RL-PO was 10%. The ascending release mechanism was due to solvent penetration into the PAL CC tablets, and subsequent drug dissolution from the gelatinous HPC and HPMC matrix erosion. The release mechanism was therefore a combination of diffusion and erosion. This work demonstrated that the compression-coated tablets could achieve controlled ascending release over 24 h for the oral administration systems.

Intracellular distribution and internalization pathways of guanidinylated bioresponsive poly(amido amine)s in gene delivery.

Guanidinylated bioresponsive poly(amido amine)s polymers, CAR-CBA and CHL-CBA, were synthesized by Michael-type addition reaction between guanidine hydrochloride (CAR) or chlorhexidine (CHL) and N,N'-cystaminebisacrylamide (CBA). Previous studies have shown that both polymers had high transfection efficiencies as gene delivery carriers. In this study, we investigated the nucleolus localization abilities and cellular internalization pathways of these two polymers in gene delivery. Each polymer condensed plasmid DNA (pDNA) and formed nanoparticle complexes, and then their transfection studies were performed in MCF-7 cells. Both complexes were found enriched in nucleolus after cellular transfection, and their transfection efficiencies were significantly improved when transfection was performed on MCF-7 cells arrested at M phase. The transfection efficiency of CAR-CBA-pDNA was inhibited by chlorpromazine, and cell endosomes were disrupted after being exposed to CAR-CBA-pDNA. In regards to CHL-CBA-pDNA, its transfection efficiency was not affected by three types of endocytosis inhibitors used in the study, and CHL-CBA-pDNA showed no effect on endosomes. Cellular lactate dehydrogenase release and membrane morphology were changed after cells were transfected by the two complexes. The results indicated that both CAR-CBA and CHL-CBA polymers demonstrated good nucleolus localization abilities. It was beneficial for transfection when cells were arrested at M phase. CAR-CBA-pDNA cellular internalization was involved with clathrin-mediated endocytosis pathway, and escaping from endosomal entrapment, while the cellular uptake of CHL-CBA-pDNA occurs via clathrin- and caveolae-independent mechanism.

Exploring the role of peptides in polymer-based gene delivery.

Polymers are widely studied as non-viral gene vectors because of their strong DNA binding ability, capacity to carry large payload, flexibility of chemical modifications, low immunogenicity, and facile processes for manufacturing. However, high cytotoxicity and low transfection efficiency substantially restrict their application in clinical trials. Incorporating functional peptides is a promising approach to address these issues. Peptides demonstrate various functions in polymer-based gene delivery systems, such as targeting to specific cells, breaching membrane barriers, facilitating DNA condensation and release, and lowering cytotoxicity. In this review, we systematically summarize the role of peptides in polymer-based gene delivery, and elaborate how to rationally design polymer-peptide based gene delivery vectors. STATEMENT OF SIGNIFICANCE: Polymers are widely studied as non-viral gene vectors, but suffer from high cytotoxicity and low transfection efficiency. Incorporating short, bioactive peptides into polymer-based gene delivery systems can address this issue. Peptides demonstrate various functions in polymer-based gene delivery systems, such as targeting to specific cells, breaching membrane barriers, facilitating DNA condensation and release, and lowering cytotoxicity. In this review, we highlight the peptides' roles in polymer-based gene delivery, and elaborate how to utilize various functional peptides to enhance the transfection efficiency of polymers. The optimized peptide-polymer vectors should be able to alter their structures and functions according to biological microenvironments and utilize inherent intracellular pathways of cells, and consequently overcome the barriers during gene delivery to enhance transfection efficiency.

Recent advances on extracellular vesicles in therapeutic delivery: Challenges, solutions, and opportunities.

Extracellular vesicles (EVs) are intrinsic mediators of intercellular communication in our body, allowing functional transfer of biomolecules (lipids, proteins, and nucleic acid) between diverse locations. Such an instrumental role evokes a surge of interest within the drug delivery community in tailoring EVs for therapeutic delivery. These vesicles represent a novel generation of drug delivery systems, providing high delivery efficiency, intrinsic targeting properties, and low immunogenicity. In the recent years, considerable research efforts have been directed toward developing safe and efficient EV-based delivery vehicles. Although EVs are shown to harbor great promise in therapeutic delivery, substantial improvements in exploring standardized isolation techniques with high efficiency and robust yield, scalable production, standard procedures for EV storage, efficient loading methods without damaging EV integrity, understanding their in vivo trafficking, and developing novel EV-based nanocarriers are still required before their clinical transformation. In this review, we seek to summarize the recent advance on harnessing EVs for drug delivery with focus on state-of-the-art solutions for overcoming major challenges.

Hot-melt sub- and outercoating combined with enteric aqueous coating to improve the stability of aspirin tablets.

Aspirin is apt to hydrolyze. In order to improve its stability, a new method has been developed involving the application of hot-melt sub- and outercoating combined with enteric aqueous coating. The main aim was to investigate the influence of these factors on the stability of ASA and understand how they work. Satisfactory storage stability were obtained when the aspirin tablet core coated with Eudragit L30D55 film was combined with glycerin monostearate (GMS) as an outercoat. Hygroscopicity testing indicated that the moisture penetrating into the tablet may result in a significant change in the physical properties of the coating film observed by scanning electron microscopy. Investigation of the compatibility between the drug and film excipients shows that the talc and methacrylic acid had a significant catalytic effect on ASA. A hypothesis was proposed that the hydrolysis of ASA enteric coated tablets (ASA-ECT) was mostly concentrated in the internal film and the interfaces between the film and tablet core. In conclusion, hot-melt coating technology is an alternative to subcoating or outercoating. Also, GMS sub-coating was a better choice for forming a stable barrier between the tablet core and the polymer coating layer, and increases the structure and chemical stability.

Membrane-Loaded Doxorubicin Liposomes Based on Ion-Pairing Technology with High Drug Loading and pH-Responsive Property.

In order to achieve high drug loading and high entrapment efficiency, a doxorubicin-cholesteryl hemisuccinate ion-pair complex (DCHIP) was formed, and the ion-pair complex liposomes (DCHIP-Lip) were prepared based on conventional thin-film dispersion method. Firstly, DCHIP was fabricated and confirmed with FTIR, 1H-NMR, DSC, and XRD techniques. Afterwards, DCHIP-Lip were prepared and evaluated in terms of particle size, zeta potential, entrapment efficiency, and drug loading content. Finally, the in vitro and in vivo behavior of liposomes was further investigated. The DCHIP-Lip had a nanoscale particle size of about 120 nm with a negative zeta potential of about -22 mV. In addition, the entrapment efficiency and drug loading content of DOX reached 6.4 ± 0.05 and 99.29 ± 0.3%, respectively. Importantly, the release of DCHIP-Lip was pH sensitive and increased cell toxicity against MCF-7 cells was achieved. Upon dilution, the liposomes were fairly stable under physiological conditions. The in vivo pharmacokinetic study indicated that the AUC of DOX in DCHIP-Lip was 11.48-fold higher than that of DOX-HCl solution and the in vivo antitumor activity of DCHIP-Lip showed less body weight loss and a significant prohibition effect of tumor growth. Based on these findings, it can be seen that the ion-pairing technology combined with conventional liposome drug loading method could be used to achieve high drug loading and it could be valuable for the study of liposomal delivery system.

Structure-Function Correlations of Poly(Amido Amine)s for Gene Delivery.

Poly(amido amine)s' (PAAs) versatility are nearly unique among stepwise polymers. Different functional groups can be easily introduced into these polymers to add functionality such as cell internalization, charge-shift, bioreducibility, "stealth" properties, and targeting moieties, while maintaining the bulk structural integrity of these polymers. The poly(amido amine)s are used as a unique research platform to elucidate their complex structure-function relationship. It is shown that guanidinium group, carboxyl group, disulfide bond, alkyl chain, branching, acetyl groups, benzoyl groups, and quaternary nicotinamide moieties can influence many steps of gene delivery, such as DNA condensation, cellular uptake, endosomal escape, nuclear entry, and finally gene expression. The authors systematically discuss the structure-function correlations of PAAs for gene delivery, and elaborate how the properties of polymers can be adjusted by changing the polymeric structure.

Uptake Pathways of Guandinylated Disulfide Containing Polymers as Nonviral Gene Carrier Delivering DNA to Cells.

Polymers of guanidinylated disulfide containing poly(amido amine)s (Gua-SS-PAAs), have shown high transfection efficiency and low cytotoxicity. Previously, we synthesized two Gua-SS-PAA polymers, using guanidino containing monomers (i.e., arginine and agmatine, denoted as ARG and AGM, respectively) and N,N'-cystaminebisacrylamide (CBA). In this study, these two polymers, AGM-CBA and ARG-CBA were complexed with plasmid DNA, and their uptake pathway was investigated. Complexes distribution in MCF-7 cells, and changes on cell endosomes/lysosomes and membrane after the cells were exposed to complexes were tested. In addition, how the transfection efficiency changed with the cell cycle status as well as endocytosis inhibitors were studied. The polymers of AGM-CBA and ARG-CBA can avoid endosomal/lysosomal trap, therefore, greatly delivering plasmid DNA (pDNA) to the cell nucleoli. It is the guanidine groups in the polymers that enhanced complexes' permeation through cell membrane with slight membrane damage, and targeting to the nucleoli. J. Cell. Biochem. 118: 903-913, 2017. © 2016 Wiley Periodicals, Inc.

Novel guanidinylated bioresponsive poly(amidoamine)s designed for short hairpin RNA delivery.

Two different disulfide (SS)-containing poly(amidoamine) (PAA) polymers were constructed using guanidino (Gua)-containing monomers (ie, arginine [Arg] and agmatine [Agm]) and N,N'-cystamine bisacrylamide (CBA) by Michael-addition polymerization. In order to characterize these two Gua-SS-PAA polymers and investigate their potentials as short hairpin RNA (shRNA)-delivery carriers, pSilencer 4.1-CMV FANCF shRNA was chosen as a model plasmid DNA to form complexes with these two polymers. The Gua-SS-PAAs and plasmid DNA complexes were determined with particle sizes less than 90 nm and positive ζ-potentials under 20 mV at nucleic acid:polymer weight ratios lower than 1:24. Bioresponsive release of plasmid DNA was observed from both newly constructed complexes. Significantly lower cytotoxicity was observed for both polymer complexes compared with polyethylenimine and Lipofectamine 2000, two widely used transfection reagents as reference carriers. Arg-CBA showed higher transfection efficiency and gene-silencing efficiency in MCF7 cells than Agm-CBA and the reference carriers. In addition, the cellular uptake of Arg-CBA in MCF7 cells was found to be higher and faster than Agm-CBA and the reference carriers. Similarly, plasmid DNA transport into the nucleus mediated by Arg-CBA was more than that by Agm-CBA and the reference carriers. The study suggested that guanidine and carboxyl introduced into Gua-SS-PAAs polymers resulted in a better nuclear localization effect, which played a key role in the observed enhancement of transfection efficiency and low cytotoxicity. Overall, two newly synthesized Gua-SS-PAAs polymers demonstrated great potential to be used as shRNA carriers for gene-therapy applications.

Effects of Pluronic F127-PEG multi-gel-core on the release profile and pharmacodynamics of Exenatide loaded in PLGA microspheres.

Pluronic F127 and PEG as a multi-gel-core were used to prepare Exenatide-loaded microspheres and store the drug within the microspheres. Also, the sol-gel transition and novel functions of the Pluronic F127-PEG gel core were investigated.Microspheres with a multi-gel-core (GCMs) and without a multi-gel-core (Ms) were compared in terms of the rate of PLGA degradation, therelease kinetics in vitro and the efficacy in KKAy mice. The drug release of GCMs was at a constant rate, and slower than Ms. In addition, after the KKAy mice were given Exenatide for 55days, the blood glucose concentration and HbA1c concentration in the GCMs group were lower than that in the Ms group. The obtained results demonstrated that a single injection of GCMs allowed the mice to maintain a stable blood glucose concentration for two weeks and their body weight was reduced more effectively than that in the Ms group. In addition, GCMs had a longer interval between dosing (two weeks) and a lower dosage(2.4µg/kg) than Bydureon(®) (one week, 33µg/kg). The bioactivity and release of macromolecular Exenatide was improved by the multi-gel-core structure:(1)The hydrophilic Exenatide tended to partition into the PEG chains of F127 and PEG homopolymer, and so it was protected from the organic solvent and vigorous stirring; (2)The macromolecular Exenatide was released both by diffusing through the hydrophilic F127-PEG chains and hydrophobic PLGA.

Guanidinylated bioresponsive poly(amido amine)s designed for intranuclear gene delivery.

Guanidinylated poly(amido amine)s with multiple disulfide linkages (Gua-SS-PAAs) were designed and constructed as nonviral gene carriers. The main chains of these novel carriers were synthesized based on monomers containing guanidino groups (guanidine hydrochloride and chlorhexidine), which could avoid complicated side-chain-modification reactions while introducing the guanidino groups. The synthesized Gua-SS-PAAs polymers were characterized by (1)H nuclear magnetic resonance, molecular weight, and polydispersity. Furthermore, Gua-SS-PAAs polymers were complexed with pDNA, and the properties of the complexes were determined, including entrapment efficiency, particle size, ζ-potential, atomic force microscopy images, stability, DNA complexation ability, reduction sensitivity, cytotoxicity, and transfection efficiency. The new Gua-SS-PAAs carriers exhibited higher transfection efficiency and lower cytotoxicity compared with two widely used gene delivery carriers, polyethylenimine and lipofectamine 2000. Furthermore, the relationship between the side-chain structure and morphological/biological properties was extrapolated, and the results showed that guanidine in the side chain aids in the improvement of transfection efficiency. In addition, the introduction of guanidino group might confer the new carriers with nuclear localization function compared to carriers without it.

Hydroxyethyl starch-10-hydroxy camptothecin conjugate: synthesis, pharmacokinetics, cytotoxicity and pharmacodynamics research.

10-hydroxy camptothecin (10-HCPT) is an antitumor agent effective in the treatment of several solid tumors but its use is hampered by poor water solubility, low lactone stability, short plasma half-life and dose-limiting toxicity. In this study, 10-HCPT-hydroxyethyl starch (HES) conjugate was prepared to overcome these limits of 10-HCPT. The solubility of 10-HCPT conjugate was 0.72 mg/ml, about 100 times to free 10-HCPT. The 10-HCPT conjugate showed good sustained release effect in phosphate-buffered saline (PBS), rat plasma and liver homogenate. Meanwhile, 10-HCPT-HES conjugate achieved much lower IC50 and higher cytotoxicity effects than the free 10-HCPT on Hep-3B liver cancer cells. The pharmacokinetics results of 10-HCPT-HES conjugate demonstrated that the biological half-life of 10-HCPT was increased from 10 min to 4.38 h and the bioavailability was 40 times higher than the commercial 10-HCPT injection. The pharmacodynamics results indicated that 10-HCPT-HES conjugate had a better antitumor efficiency against nude mouse with Hep-3B tumor than the commercial 10-HCPT injection, and the inhibition ratio of tumor was 83.9 and 27.8%, respectively, at the same administration dosage. These findings suggest that 10-HCPT-HES conjugate is a promising drug delivery system providing improved long circulating effect, greater stability and better antitumor effect.