An Ultrathin, Fast-Response, Large-Scale Liquid-Crystal-Facilitated Multi-Functional Reconfigurable Metasurface for Comprehensive Wavefront Modulation.

The rapid advancement of prevailing communication/sensing technologies necessitates cost-effective millimeter-wave arrays equipped with a massive number of phase-shifting cells to perform complicated beamforming tasks. Conventional approaches employing semiconductor switch/varactor components or tunable materials encounter obstacles such as quantization loss, high cost, high complexity, and limited adaptability for realizing large-scale arrays. Here, a low-cost, ultrathin, fast-response, and large-scale solution relying on metasurface concepts combined together with liquid crystal (LC) materials requiring a layer thickness of only 5 µm is reported. Rather than immersing resonant structures in LCs, a joint material-circuit-based strategy is devised, via integrating deep-subwavelength-thick LCs into slow-wave structures, to achieve constitutive metacells with continuous phase shifting and stable reflectivity. An LC-facilitated reconfigurable metasurface sub-system containing more than 2300 metacells is realized with its unprecedented comprehensive wavefront manipulation capacity validated through various beamforming functions, including beam focusing/steering, reconfigurable vortex beams, and tunable holograms, demonstrating a milli-second-level function-switching speed. The proposed methodology offers a paradigm shift for modulating electromagnetic waves in a non-resonating broadband fashion with fast-response and low-cost properties by exploiting functionalized LC-enabled metasurfaces. Moreover, this extremely agile metasurface-enabled antenna technology will facilitate a transformative impact on communication/sensing systems and empower new possibilities for wavefront engineering and diffractive wave calculation/inference.

Sn Whiskers from Ti2 SnC Max Phase: Bridging Dual-Functionality in Electromagnetic Attenuation.

In the ever-evolving landscape of complex electromagnetic (EM) environments, the demand for EM-attenuating materials with multiple functionalities has grown. 1D metals, known for their high conductivity and ability to form networks that facilitate electron migration, stand out as promising candidates for EM attenuation. Presently, they find primary use in electromagnetic interference (EMI) shielding, but achieving a dual-purpose application for EMI shielding and microwave absorption (MA) remains a challenge. In this context, Sn whiskers derived from the Ti2 SnC MAX phase exhibit exceptional EMI shielding and MA properties. A minimum reflection loss of -44.82 dB is achievable at lower loading ratios, while higher loading ratios yield efficient EMI shielding effectiveness of 42.78 dB. These qualities result from a delicate balance between impedance matching and EM energy attenuation via adjustable conductive networks; and the enhanced interfacial polarization effect at the cylindrical heterogeneous interface between Sn and SnO2 , visually characterized through off-axis electron holography, also contributes to the impressive performance. Considering the compositional diversity of MAX phases and the scalable fabrication approach with environmental friendliness, this study provides a valuable pathway to multifunctional EM attenuating materials based on 1D metals.

Multifunctional MXene/C Aerogels for Enhanced Microwave Absorption and Thermal Insulation.

Two-dimensional transition metal carbides and nitrides (MXene) have emerged as promising candidates for microwave absorption (MA) materials. However, they also have some drawbacks, such as poor impedance matching, high self-stacking tendency, and high density. To tackle these challenges, MXene nanosheets were incorporated into polyacrylonitrile (PAN) nanofibers and subsequently assembled into a three-dimensional (3D) network structure through PAN carbonization, yielding MXene/C aerogels. The 3D network effectively extends the path of microcurrent transmission, leading to enhanced conductive loss of electromagnetic (EM) waves. Moreover, the aerogel's rich pore structure significantly improves the impedance matching while effectively reducing the density of the MXene-based absorbers. EM parameter analysis shows that the MXene/C aerogels exhibit a minimum reflection loss (RLmin) value of - 53.02 dB (f = 4.44 GHz, t = 3.8 mm), and an effective absorption bandwidth (EAB) of 5.3 GHz (t = 2.4 mm, 7.44-12.72 GHz). Radar cross-sectional (RCS) simulations were employed to assess the radar stealth effect of the aerogels, revealing that the maximum RCS reduction value of the perfect electric conductor covered by the MXene/C aerogel reaches 12.02 dB m2. In addition to the MA performance, the MXene/C aerogel also demonstrates good thermal insulation performance, and a 5-mm-thick aerogel can generate a temperature gradient of over 30 °C at 82 °C. This study provides a feasible design approach for creating lightweight, efficient, and multifunctional MXene-based MA materials.

Low-loss and flexible terahertz bandpass frequency selective surface based on cyclic olefin copolymer substrate via solvent-free synthesis.

This study investigates a low-loss and flexible terahertz frequency selective surface (FSS) based on cyclic olefin copolymer (COC) film substrate, which is fabricated via a simple temperature-control method without the use of solvent. The measured frequency response of the proof-of-concept COC-based THz bandpass FSS matches well with the numerical results. Due to the ultra-low COC dielectric dissipation factor (order of 0.0001) in the THz band, the measured passband insertion loss at 559 GHz reaches 1.22 dB, which is much better than that of previously reported THz bandpass filters. This work indicates that the remarkable characteristics (small dielectric constant, low frequency dispersion, low dissipation factor, good flexibility, etc.) of the proposed COC material make it a great application prospect in the THz field.

Comparison of Metallization Schemes on Glass Dielectrics for X-Band Glass Antennas and Energy Harvesting.

We prepare and test four types of glass antennas for X-band applications and energy harvesting. These antennas are made of three different glass metallization schemes, including conductive copper foil (CCF), conductive silver paste (CSP) and indium tin oxide (ITO) thin film. Compared with conventional microstrip patch antennas, the dielectric substrate materials of these designs are replaced with silicon-boron glass (εr = 6, tangent δ = 0.002). The antenna with CCF as a radiator and ground plane (case one) is compared with the antenna with ITO replacing the radiator (case two) and ground plane (case three), respectively, and the glass antenna made of CSP (case four) is also presented. In this paper, these four types of glass antennas are measured and analyzed, and a comparison of the fabrication process and performance of these antennas is demonstrated. This study could contribute to the development of human-machine interactivity (HMI) systems with glass dielectric substrates.