N-Heterocyclic Olefin Type Ionic Liquid with Innate Soft Lewis-Base Character as an Effective Additive for Hybrid Quasi-2D and 3D Perovskite Solar Cells.

In optimizing perovskites with ionic liquid (IL), the comparative study on Lewis acid-base (LAB) and hydrogen-bonding (HB) interactions between IL and perovskite is lacking. Herein, methyl is substituted for hydrogen on 2-position of imidazolium ring of N-heterocyclic carbene (NHC) type IL IdH to weaken HB interactions, and the resulting N-heterocyclic olefin (NHO) type IL IdMe with softer Lewis base character is studied in both hybrid quasi-2D (Q-2D) and 3D perovskites. It is revealed that IdMe participates in constructing high-quality Q-2D perovskite (n = 4) and provides stronger passivation for 3D perovskite compared with IdH. Power conversion efficiency (PCE) of Q-2D PEA2 MA3 Pb4 I13 perovskite solar cells (PVSCs) is boosted to 17.68% from 14.03%. PCE and device stability of 3D PVSCs enhances simultaneously. Both theoretical simulations and experimental results show that LAB interactions between NHO and Pb2+ take the primary optimization effects on perovskite. The success of engineering LAB interactions also offers inspiration to develop novel ILs for high-performance PVSCs.

Promoting Energy Transfer Between Quasi-2D Perovskite Layers Toward Highly Efficient Red Light-Emitting Diodes.

Although tremendous progress has recently been made in quasi-2D perovskite light-emitting diodes (PeLEDs), the performance of red PeLEDs emitting at ≈650-660 nm, which have wide prospects for application in photodynamic therapy, is still limited by an inefficient energy transfer process between the quasi-2D perovskite layers. Herein, a symmetric molecule of 3,3'-(9H-fluorene-9,9-diyl)dipropanamide (FDPA) is designed and developed with two functional acylamino groups and incorporated into the quasi-2D perovskites as the additive for achieving high-performance red PeLEDs. It is demonstrated that the agent can simultaneously diminish the van der Waals gaps between individual perovskite layers and passivate uncoordinated Pb2+ related defects at the surface and grain boundaries of the quasi-2D perovskites, which truly results in an efficient energy transfer in the quasi-2D perovskite films. Consequently, the red PeLEDs emitting at 653 nm with a peak external quantum efficiency of 18.5% and a maximum luminance of 2545 cd m-2 are achieved, which is among the best performing red quasi-2D PeLEDs emitting at ≈650-660 nm. This work opens a way to further improve the electroluminescence performance of red PeLEDs.

Environmentally Responsive Intelligent Dynamic Water Collector.

Collecting water from fog flow is emerging as a promising solution to the water shortage problem. This work demonstrated a novel environmentally responsive water collector made from a self-prepared Janus polyvinyl alcohol sponge in combination with a two-way shape memory alloy spring, which transforms the traditional manner of static water collection into a dynamic one. The unidirectional water transport of the Janus structure together with the dynamic collection approach correspond to a 30.8% increase in the water-collection rate (WCR). The resultant WCR is up to 5.1 g/h, which ranks relatively high compared to similar studies. The light- and thermal-response capability, easy fabrication, and good cycling performance indicate that our devices could be utilized in a variety of applications. In this work, an efficient, intelligent adaptive, simple-preparation, precision-guided, and economical fog-collecting devices are recommended. Our work provides new insights on the design of high-efficient water collectors with practicability.

Manipulate Micrometer Surface and Nanometer Bulk Phase Separation Structures in the Active Layer of Organic Solar Cells via Synergy of Ultrasonic and High-Pressure Gas Spraying.

For organic solar cells, the vertical and lateral micro-/nanometer-scale structure in the active layer largely determines the device performance. In this work, the surface and bulk domain size of the photoactive layer are successfully manipulated with a facile two-step spraying method, that is, an ultrathin active layer by high-pressure spraying is deliberately stacked on top of the thick active layer by ultrasonic spraying. Thus, the morphology is effectively optimized with the comprehensive study of optical and electrical characteristics, such as photon absorption, exciton dissociation efficiency, and bimolecular recombination. Moreover, the novel method can be used not only in the fullerene system but also in the nonfullerene system, demonstrating the remarkable universality through this synergy method. This work provides an easy and reliable strategy to improve photovoltaic device performance in the industrial large-area spray-coating process.

Roll-to-Roll Slot-Die-Printed Polymer Solar Cells by Self-Assembly.

Extremely simplified one-step roll-to-roll slot-die-printed flexible indium tin oxide (ITO)-free polymer solar cells (PSCs) are demonstrated based on the ternary blends of electron-donor polymer thieno[3,4- b]thiophene/benzodithiophene, electron-acceptor fullerene [6,6]-phenyl-C71-butyric acid methyl ester, and electron-extracting polymer poly[(9,9-bis(3'-( N, N-dimethylamino)propyl)-2,7-fluorene)- alt-2,7-(9,9-dioctylfluorene)] (PFN) at room temperature (RT) in ambient air. The flexible ITO-free PSC exhibits a comparable power conversion efficiency (PCE) with the device employing complicated two-step slot-die printing (5.29% vs 5.41%), which indicates that PFN molecules can migrate from the ternary nanocomposite toward the Ag cathode via vertical self-assembly during the one-step slot-die printing process in air. To confirm the migration of PFN, the morphology and elemental analysis as well as charge transport of different active layers are investigated by the in situ transient film drying process, transmission electron microscopy, atomic force microscopy, contact angle and surface energy, X-ray photoelectron spectroscopy, scanning electron microscopy, impedance spectroscopy, transient photovoltage and transient photocurrent, and laser-beam-induced current. Moreover, the good air and mechanical stability of the flexible device with a decent PCE achieved in 1 cm2 PSCs at RT in air suggests the feasibility of energy-saving and time-saving one-step slot-die printing to large-scale roll-to-roll manufacture in the future.

DNA Based Hybrid Material for Interface Engineering in Polymer Solar Cells.

A new solution processable electron transport material (ETM) is introduced for use in photovoltaic devices, which consists of a metallic conjugated polyelectrolyte, poly(4-(2,3-dihydrothieno[3,4- b][1,4]dioxin-2-yl-methoxy)-1-butanesulfonic acid (PEDOT-S), and surfactant-functionalized deoxyribonucleic acid (DNA) (named DNA:CTMA:PEDOT-S). This ETM is demonstrated to effectively work for bulk-heterojunction organic photovoltaic devices (OPV) based on different electron acceptor materials. The fill factor, the open circuit voltage, and the overall power conversion efficiency of the solar cells with a DNA:CTMA:PEDOT-S modified cathode are comparable to those of devices with a traditional lithium fluoride/aluminum cathode. The new electron transport layer has high optical transmittance, desired work function and selective electron transport. A dipole effect induced by the use of the surfactant cetyltrimethylammonium chloride (CTMA) is responsible for lowering the electrode work function. The DNA:CTMA complex works as an optical absorption dilutor, while PEDOT-S provides the conducting pathway for electron transport, and allows thicker layer to be used, enabling printing. This materials design opens a new pathway to harness and optimize the electronic and optical properties of printable interface materials.

Balanced Partnership between Donor and Acceptor Components in Nonfullerene Organic Solar Cells with >12% Efficiency.

Relative to electron donors for bulk heterojunction organic solar cells (OSCs), electron acceptors that absorb strongly in the visible and even near-infrared region are less well developed, which hinders the further development of OSCs. Fullerenes as traditional electron acceptors have relatively weak visible absorption and limited electronic tunability, which constrains the optical and electronic properties required of the donor. Here, high-performance fullerene-free OSCs based on a combination of a medium-bandgap polymer donor (FTAZ) and a narrow-bandgap nonfullerene acceptor (IDIC), which exhibit complementary absorption, matched energy levels, and blend with pure phases on the exciton diffusion length scale, are reported. The single-junction OSCs based on the FTAZ:IDIC blend exhibit power conversion efficiencies up to 12.5% with a certified value of 12.14%. Transient absorption spectroscopy reveals that exciting either the donor or the acceptor component efficiently generates mobile charges, which do not suffer from recombination to triplet states. Balancing photocurrent generation between the donor and nonfullerene acceptor removes undesirable constraints on the donor imposed by fullerene derivatives, opening a new avenue toward even higher efficiency for OSCs.

A Highly Crystalline Wide-Band-Gap Conjugated Polymer toward High-Performance As-Cast Nonfullerene Polymer Solar Cells.

A new wide-band-gap conjugated polymer PBODT was successfully synthesized that showed high crystallinity and was utilized as the active material in nonfullerene bulk-heterojunction polymer solar cells (PSCs). The photovoltaic devices based on the as-cast blend films of PBODT with ITIC and IDIC acceptors showed notable power conversion efficiencies (PCEs) of 7.06% and 9.09%, with high open-circuit voltages of 1.00 and 0.93 V that correspond to low energy losses of 0.59 and 0.69 eV, respectively. In the case of PBODT:ITIC, lower exciton quenching efficiency and monomolecular recombination are found for devices with small driving force. On the other hand, the relatively higher driving force and suppressed monomolecular recombination for PBODT:IDIC devices are identified to be the reason for their higher short-circuit current density (Jsc) and higher PCEs. In addition, when processed with the nonchlorinated solvent 1,2,4-trimethylbenzene, a good PCE of 8.19% was still achieved for the IDIC-based device. Our work shows that such wide-band-gap polymers have great potential for the environmentally friendly fabrication of highly efficient PSCs.

Macroscopic Domains within an Oriented TQ1 Film Visualized Using 2D Polarization Imaging.

Large-area self-assembly of functional conjugated polymers holds a great potential for practical applications of organic electronic devices. We obtained well-aligned films of poly[2,3-bis(3-octyloxyphenyl)quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1) using the floating film transfer method. Thereby, a droplet of the TQ1 solution was injected on top of the surface of an immiscible liquid substrate, at the meniscus formed at the edge of a Petri dish, from where the polymer solution and the film spread in one direction. Characterization of the TQ1 film using the recently developed two-dimensional polarization imaging (2D POLIM) revealed large, millimeter-sized domains of oriented polymer chains. The irregular shape of the contact line at the droplet source induced the appearance of disordered stripes perpendicular to the spreading direction. A correlation of polarization parameters measured using 2D POLIM revealed the microstructure of such stripes, providing valuable information for further improvement and possible upscaling of this promising method.

Morphology Evolution in High-Performance Polymer Solar Cells Processed from Nonhalogenated Solvent.

A new processing protocol based on non-halogenated solvent and additive is developed to produce polymer solar cells with power conversion efficiencies better than those processed from commonly used halogenated solvent-additive pair. Morphology studies show that good performance correlates with a finely distributed nanomorphology with a well-defined polymer fibril network structure, which leads to balanced charge transport in device operation.

High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm.

Sensing from the ultraviolet-visible to the infrared is critical for a variety of industrial and scientific applications. Today, gallium nitride-, silicon-, and indium gallium arsenide--based detectors are used for different sub-bands within the ultraviolet to near-infrared wavelength range. We demonstrate polymer photodetectors with broad spectral response (300 to 1450 nanometers) fabricated by using a small-band-gap semiconducting polymer blended with a fullerene derivative. Operating at room temperature, the polymer photodetectors exhibit detectivities greater than 10(12) cm Hz(1/2)/W and a linear dynamic range over 100 decibels. The self-assembled nanomorphology and device architecture result in high photodetectivity over this wide spectral range and reduce the dark current (and noise) to values well below dark currents obtained in narrow-band photodetectors made with inorganic semiconductors.