RESUMO
As a rich green energy source, natural gas is widely used in many fields such as the chemical industry, automobile energy, and daily life. However, it is very challenging to separate and recover C2H6 and C3H8 from natural gas. Metal-organic frameworks (MOFs) as an emerging type of multi-pore porous materials show huge potential in gas adsorption separation. Herein, we report pillar-layered MOFs, Ni (BDC)(DABCO)0.5 (DMOF-X), modified by halogen atoms (F, Cl, Br), and investigate their CH4/C2H6/C3H8 separation performance. The experimental results show that DMOF-Cl exhibited a extremely high adsorption capacity for C3H8 and C2H6. Under the conditions of 298 K and 100 kPa, the adsorption capacities for C3H8 and C2H6 on DMOF-Cl are as high as 6.23 and 4.94 mmol g-1, which are superior to the values for most of the porous materials that have been reported. In addition, DMOF-Cl also shows high C3H8/CH4 (5: 85, V/V) and C2H6/CH4 (10: 85, V/V) separation selectivities, with values of 130.9 and 12.5, respectively. Finally, DMOF-Cl also demonstrated great potential as an adsorbent for separating C3H8/C2H6/CH4.
RESUMO
Developing hydrogen-bonded organic frameworks (HOFs) that combine functional sites, size control, and storage capability for targeting gas molecule capture is a novel and challenging venture. However, there is a lack of effective strategies to tune the hydrogen-bonded network to achieve high-performance HOFs. Here, a series of HOFs termed as HOF-ZSTU-M (M=1, 2, and 3) with different pore structures are obtained by introducing structure-directing agents (SDAs) into the hydrogen-bonding network of tetrakis (4-carboxyphenyl) porphyrin (TCPP). These HOFs have distinct space configurations with pore channels ranging from discrete to continuous multi-dimensional. Single-crystal X-ray diffraction (SCXRD) analysis reveals a rare diversity of hydrogen-bonding models dominated by SDAs. HOF-ZSTU-2, which forms a strong layered hydrogen-bonding network with ammonium (NH4 + ) through multiple carboxyl groups, has a suitable 1D "pearl-chain" channel for the selective capture of propylene (C3 H6 ). At 298â K and 1â bar, the C3 H6 storage density of HOF-ZSTU-2 reaches 0.6â kg L-1 , representing one of the best C3 H6 storage materials, while offering a propylene/propane (C3 H6 /C3 H8 ) selectivity of 12.2. Theoretical calculations and in situ SCXRD provide a detailed analysis of the binding strength of C3 H6 at different locations in the pearl-chain channel. Dynamic breakthrough tests confirm that HOF-ZSTU-2 can effectively separate C3 H6 from multi-mixtures.
RESUMO
Hydrogen-bonded organic frameworks (HOFs), as an emerging porous material, have attracted increasing research interest in fluorescence sensing due to their inherent fluorescence emission units with unique physicochemical properties. Herein, based on the organic building block 3,3',5,5'-tetrakis-(4-carboxyphenyl)-1,1'-biphenyl (H4TCBP), the porous material HOF-TCBP was successfully synthesized using hydrogen bond self-assembly in a DMF solution. The fluorescence properties of the HOF-TCBP solution showed that when the concentration was high, excimers were easily formed, the PL emission was red-shifted, and the fluorescence intensity became weaker. HOF-TCBP showed good sensitivity and selectivity to metal ions Fe3+, Cr3+, and anion Cr2O72-. In addition, HOF-TCBP can serve as a label-free fluorescent sensor material for the sensitive and selective detection of dopamine (DA). HOF-based DA sensing is actually easy, low-cost, simple to operate, and highly selective for many potential interfering substances, and it has been successfully applied to the detection of DA in biological samples with satisfactory recoveries (101.1-104.9%). To our knowledge, this is the first report of HOF materials for efficient detection of the neurotransmitter dopamine in biological fluids. In short, this work widely broadens the application of HOF materials as fluorescent sensors for the sensing of ions and biological disease markers.
Assuntos
Corantes , Dopamina , Ligação de Hidrogênio , Porosidade , Íons , HidrogênioRESUMO
Photocatalytic hydrogen production using stable metal-organic frameworks (MOFs), especially the titanium-based MOFs (Ti-MOFs) as photocatalysts is one of the most promising solutions to solve the energy crisis. However, due to the high reactivity and harsh synthetic conditions, only a limited number of Ti-MOFs have been reported so far. Herein, we synthesized a new amino-functionalized Ti-MOFs, named NH2-ZSTU-2 (ZSTU stands for Zhejiang Sci-Tech University), for photocatalytic hydrogen production under visible light irradiation. The NH2-ZSTU-2 was synthesized by a facile solvothermal method, composed of 2,4,6-tri(4-carboxyphenylphenyl)-aniline (NH2-BTB) triangular linker and infinite Ti-oxo chains. The structure and photoelectrochemical properties of NH2-ZSTU-2 were fully studied by powder X-ray diffraction, scanning electron microscope, nitro sorption isotherms, solid-state diffuse reflectance absorption spectra, and Mott-Schottky measurements, etc., which conclude that NH2-ZSTU-2 was favorable for photocatalytic hydrogen production. Benefitting from those structural features, NH2-ZSTU-2 showed steady hydrogen production rate under visible light irradiation with average photocatalytic H2 yields of 431.45 µmol·g-1·h-1 with triethanolamine and Pt as sacrificial agent and cocatalyst, respectively, which is almost 2.5 times higher than that of its counterpart ZSTU-2. The stability and proposed photocatalysis mechanism were also discussed. This work paves the way to design Ti-MOFs for photocatalysis.
RESUMO
Adsorptive separation of propylene/propane (C3 H6 /C3 H8 ) mixture is desired for its potential energy saving on replacing currently deployed and energy-intensive cryogenic distillation. Realizing efficient C3 H6 /C3 H8 separation in the emerging hydrogen-bonded organic frameworks (HOFs) is very challenging owing to the lack of functional sites for preferential gas binding. By virtue of crystal engineering, we herein report a functionalized HOF (HOF-16) with free -COOH sites for the efficient separation of C3 H6 /C3 H8 mixtures. Under ambient conditions, HOF-16 shows a significant C3 H6 /C3 H8 uptake difference (by 76 %) and selectivity (5.4) in contrast to other carboxylic acid-based HOFs. Modeling studies indicate that free -COOH groups together with the suitable pore confinement facilitate the recognition and high-density packing of gas molecules. The separation performance of HOF-16 was validated by breakthrough experiments. HOF-16 is stable towards strong acidity and water.